MIB Catalog

This MIB module describes objects for managing the Accounting service features of devices in the HP Integrated Communication Facility product line.

This MIB module contains the definitions of objects for managing the user authorization service on HP networking devices.

This MIB module describes devices in the HP Procurve 700 series product line.

MIB module

MIB module

This MIB module describes traps generated by the Event Monitor Service (EMS).

The MIB module for representing multiple logical entities supported by a single SNMP agent. This is an exact copy of draft 7 of the IETF Entity MIB. The only changes are to actually assign an OID to i

This MIB defines HP proprietary objects that can be used to set the power status of physical entities and report power usage statistics.

MIB module

This MIB module contains objects that provide HP-specific extensions to the 802.3 Repeater MIB.

This MIB module contains HP proprietary objects for managing ARP throttling.

This MIB module manages Autorun configuration for devices in the HP Integrated Communication Facility product line.

This MIB module describes objects for basic management of devices in the HP Integrated Communication Facility product line.

This MIB module describes objects for managing the Bring Your Own Device feature of devices in the HP Integrated Communication Facility product line.

This MIB module describes management of the Distributed Management Chain for devices in the HP AdvanceStack product line.

This MIB module describes chassis devices in the HP Integrated Communication Facility product line. Note that most of this module will be superseded by the standard Entity MIB. However, the hpicfSenso

This MIB module contains HPE proprietary objects for handling the Configuration Restore feature.

This MIB module describes objects for management of the Connection Rate Filter feature in the ProCurve Switch product line.

This MIB module describes core dump related information.

This MIB module contains HP proprietary objects for managing the auto-configuration feature.

Added new device identity table HpicfDeviceIdentityEntry. This table is used to identify device using discovery protocol like LLDP. LLDP make use of OUI and device subtype of organization specific TLV

This MIB module contains HP proprietary objects for managing the DHCP Client.

Initial revision.

This MIB module describes objects to configure the Device Link Detection (DLDP) feature.

This MIB describes objects for management of Denial of Service (DoS) attack packet filtering.

This MIB module manages the network download capabilities for devices in the HP Integrated Communication Facility product line.

This MIB module contains object definitions for managing the Fault Finder feature in web-capable HP devices.

This MIB module contains object definitions that are common to all repeater devices in the HP Integrated Communication Facility product line.

This MIB module contains HP proprietary definitions for Instrumentation.

This MIB module contains HP proprietary definitions for Instrumentation Monitor.

This MIB module contains HP proprietary objects for managing IP Routing.

This MIB module describes objects for basic IP address configuration and interface configuration for devices in the HP Integrated Communication Facility product line.

This MIB module contains HP proprietary objects for managing RA Guard.

This MIB module contains HP proprietary objects used to configure Job Scheduling.

This MIB module describes HP Jumbo information.

This MIB module describes extension objects to the per-interface MAC address configuration for devices in the HP Integrated Communication Facility product line.

This MIB module describes objects to enable/disable layer 3 interface on a VLAN for devices in the HP Integrated Communication Facility product line.

This MIB module describes objects for managing the link test features of devices in the HP Integrated Communication Facility product line.

This MIB module describes objects for managing the Local MAC Authentication feature of devices in the HP Integrated Communication Facility product line.

The MIB module is for Multi Active Detection Technology (MAD).

This MIB module describes objects for enforcing minimum secure key size in the HPE Integrated Communication Facility product line.

Management information for configuring the NTP client on Hewlett-Packard network devices.

This MIB module describes devices in the HP Integrated Communication Facility product line.

The MIB module is for representing Oobm entity

This MIB module contains HP proprietary extensions to the standard PIM MIB (RFC 2934).

This MIB module contains HP proprietary extensions to the standard PIM MIB (RFC 5060).

This MIB module describes management objects used to manage Power Source Equipment (PSE).

This MIB module describes HP rate limit information.

This MIB module describes objects for basic management of reloading devices in the HP Integrated Communication Facility product line.

This is a HP proprietary MIB module to describe the RIPng protocol.

This MIB module describes objects for managing the SNMPv1 authorization configuration for devices in the HP Integrated Communication Facility product line.

This MIB module contains HP proprietary objects for managing service tunnels.

This MIB module describes HP Sflow information.

This MIB module describes objects for module related statistics in the HP Integrated Communication Facility product line.

This MIB module contains HP proprietary objects for managing SNMP entity.

This MIB module contains the definitions of HP proprietary Managed Objects used for managing HP Routing switches with implemented source IP address administrative control.

This MIB module contains object definitions for managing HP stackable devices.

The MIB module for configuring and monitoring syslog applications. The HP syslog application sends syslog messages.

This module contains common textual convention definitons used by various HP ICF MIB modules.

This MIB module describes objects for enforcing TLS minimum version enforcement and ciphersuire enforcement in the HP Integrated Communication Facility product line.

This MIB module describes HP transceiver information.

This MIB module contains HP proprietary objects for managing the Tunneled Node protocol.

This MIB module describes objects to configure the Unidirectional Link Detection (UDLD) feature.

The MIB module describes the objects to configure Uplink Failure Detection feature

This MIB module describes objects for management of Unicast Reverse Path Forwarding (URPF).

This MIB module manages the USB Port.

This MIB module contains the definitions of Managed Objects for user access profiles.

This MIB module contains objects that provide HP-specific extensions to the 802.12 Repeater MIB.

Extensions to IF-MIB for HP Procurve product line.

MIB module

MIB module for configuring trunk Load Balancing on Hewlett-Packard network devices.

This MIB module describes an HP private MIB for the management of Multi Computer Clusters. The MIB is intended to support general cluster

This MIB module describes an HP private MIB for the management of ServiceGuard Clusters. The MIB is intended to support specific ServiceGuard cluster

Memory and Process information for HP Procurve product line.

MIB module

This is the MIB module that describes an HP private mib for the management of OpenCall traps.

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label S

MIB module

MIB module

MIB module

MIB module

MIB module

Managment information for configuring the SNTP client on Hewlett-Packard network devices.

This MIB module is for the Switch Error Messages reporting with SNMP

This MIB module describes objects for management of FIP (FCoE Initialization Protocol) snooping in the HP Integrated Communication Facility product line.

This MIB describes information like build date, image version, build number, image size for the images in the flash(non-volatile memory). This mib will also give similar details for running software v

MIB module

MIB module

This MIB module describes objects for basic management of devices in the HP Procurve product line.

This MIB module describes objects for managing the Stacking features of devices in the HP Integrated Communication Facility product line.

The MIB module for managing the tunnel interfaces

MIB module

This MIB module describes management objects used to model virtual LANs (VLANs).

MIB module

MIB module

MIB module

MIB module

This MIB defines HPE proprietary objects used to configure the Activate feature.

This MIB defines HP proprietary objects used to configure the device with AirWave Management Platform (AMP).

This MIB defines HP proprietary objects used to configure the cloud feature.

This MIB module contains HP proprietary objects for managing IP Service Level Agreement (SLA).

This MIB module contains HP proprietary objects for managing the NetDestNetService feature.

This MIB defines HP proprietary objects used to configure the TR-069 feature.

MIB module

MIB module

The information about the wireless card and the UIM (User Identification Module).

this file extends IEEE8021-PAE-MIB(802.1x)

This MIB contains objects to manage configuration for AAA Nas-id feature. AAA presents authentication, authorization and accouting. NAS acts as the Network Access Server. Nas-id is an identifier that