HP-SYSTEM-MIB
AI MIB Summary
The HP-SYSTEM-MIB provides standard SNMP access to monitor and manage system-level telemetry on HP ProCurve networking hardware, including CPU utilization, memory usage, temperature sensors, fan status, and device uptime.
This MIB module describes objects for basic management of devices in the HP Procurve product line.
Main OID:
hpProcurveSystem.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1
50
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
hpProcurveSystemThis MIB module describes objects for basic management of devices in the HP Procurve product line. MODULE-IDENTITY .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1 |
hpSystemTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0 |
fanDownA fanDown trap signifies that hpFanOperational has detected an event where the fan is not operating. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.1 |
fanUpA fanUp trap signifies that hpFanOperational has detected an event where the fan is now operating. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.2 |
temperatureAlarmA temperatureAlarm signifies that the SNMP entity, acting in an agent role, has detected that the hpCpuTemperature has a value that exceeds acceptable tolerances (i.e. it is too hot or too cold). NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.3 |
hpFailoverA hpFailover signifies that the SNMP entity, acting in an agent role, has detected that the standby system in a primary, redundant operation has become the primary system. This notification will only be sent by what was formerly the standby system. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.4 |
hpDistributionEventA hpDistributionEvent signifies that the SNMP entity, acting in an agent role, has detected that the central entity in a distributed system has triggered a distribution event of hpDistributionType. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.5 |
hpAdminAuthFailureA hpAdminAuthFailure signifies that the SNMP entity, acting in an agent role, has detected that someone at the address reported by hpAdminIpAddress has failed to authenticate to the device via the administrative interface. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.6 |
hpProcurveSysMib OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1 |
hpProductDescriptionTextual Description of the HW productro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.1 |
hpProductHWVersionHW version of the productro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.2 |
hpProductSWVersionSW version of the productro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.3 |
hpProductSerialNumberSerial Number of the productro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.4 |
hpProductLastChangeDate and time of last configuration changero OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.5 |
hpCpuTemperatureCurrent temperature in degrees centigrade of the CPU.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.6 |
hpPowerSupplyTemperatureCurrent temperature in degrees centigrade of the power supply.rodeprecated OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.7 |
hpChassisTemperatureCurrent temperature in degrees centigrade of the mother board. Note: this is not the ambient temperature of the box.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.8 |
hpFanStatusTableTable of operational status of all internal cooling fans. SEQUENCE OF HpFanStatusEntry .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9 |
hpFanStatusEntryEntry in table of all internal cooling fans. HpFanStatusEntry .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1 |
hpFanNumberIdentifier of cooling fan, numbered to represent what hardware the fan is supposed to be cooling.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.1 |
hpFanOperationalOperational status of a cooling fan.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.2 |
hpFanSpeedSpeed of the fan in RPM.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.3 |
hpSystemMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2 |
hpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1 |
hpNameA textual string containing information about the device. For instance, this string reflects the setting of the HP J8162A XL Access Controller Module Name available on the Administrative Web based User Interface. If no HP J8162A XL Access Controller Module name is entered, this object contains a zero-length string.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.2 |
hpSystemIDThe unique identifier for this device, as used by this system, or a master controlling system. For instance, an HP J8162A XL Access Controller Module would report the systemID used by the Access Control Server 740wl to uniquely identify this device.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.3 |
hpStateThe current state of the device. A HP ProCurve Networking Business device can be configured for standalone operation, Failover (ie with a redundant peer), or for Distribution of configuration from a controlling central system to remote entities. unknown(1) - system Configuration status unknown up(2) - a standalone system is operational. down(3) - a system is not operational. primary(4) - system is running as the primary in a Failover peer configuration. secondary(5) - system is running as the backup in a Failover peer configuration.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.4 |
hpDistributionTypeThe most recent distribution event type on a device. This object will change dynamically based on the most recently triggered distribution event. unknown(1) - the distribution event type none(2) - no distribution event has occurred rightsPush(3) - the central Access Control Server 740wl has triggered a rights push event to remote Access Control Server 740wls.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.5 |
hpDistributionStatusThe most recent distribution event on a device. This object will change dynamically based on the most recently triggered distribution event. unknown(1) - the distribution event status unknown succeeded(2) - no distribution event has succeeded failed(3) - the distribution event failed for some reason.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.6 |
hpIpAddressThe administratively assigned IP address associated with the device. This can be assigned statically on the device Console port, or configured via DHCP.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.7 |
hpPeerIpAddressThe administratively assigned IP address associated with a redundant peer device, configured to work with this device for failover purposes. This can be assigned statically on the device Console port, or configured via DHCP. If the device does not support Failover configuration, or none has been configured, this object will report 0.0.0.0rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.8 |
hpTechSupportEnabledThis object contains the current setting for the technical support access to the device. A value of true(1) indicates the Technical Support Access has been enabled. A value of false(2) indicates this access has been disabled. Note this object should only report true(2) if HP ProCurve Networking Business Technical Support staff have requested this access to the HP J8162A XL Access Controller Module for troubleshooting purposes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.9 |
hpFailedAdminIpAddressThe IP address associated with the last failed authentication to the Administrative UI. If no Administrator had failed authentication, this object will report 0.0.0.0ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.10 |
hpStatus OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2 |
hpNumAccessControllersThe number of HP J8162A XL Access Controller Modules known to this system. If this system is an HP J8162A XL Access Controller Module, this value will be 1. Otherwise, this value will be the number of HP J8162A XL Access Controller Modules this system is connected to (i.e. An Access Control Server 740wl connects to multiple HP J8162A XL Access Controller Module's).ro Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.1 |
hpNumClientsThe total number of active authenticated or unauthenticated clients known to this system. If this device is an HP J8162A XL Access Controller Module, then this object reports the aggregated number of clients across all ports. If this device is a Access Control Server 740wl, it reports all Clients aggregated across all HP J8162A XL Access Controller Modules known to this system.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.2 |
hpNotificationsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3 |
hpFailoverNotificationEnabledThis object controls whether a hpFailover notification will be sent in the event of a failover occurrence between a primary and standby system. By default this object is set to false(2) for all systems.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1 |
hpDistributionNotificationEnabledThis object controls whether a hpDistribution notification will be sent in the event of a distribution event between a central and remote systems. By default this object is set to false(2) for all systems.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.2 |
hpAdminAuthFailureNotificationEnabledThis object controls whether a hpAdminAuthFailure notification will be sent in the event of a failed authentication attempt at the administrator login.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.3 |
hpSystemMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3 |
hpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1 |
hpSystemMIBCompliance1The compliance statement for entities which implement the HP-SYSTEM-MIB. Unknown .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1.1 |
hpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2 |
hpSystemGroupA collection of objects providing system information applicable to all devices. Unknown .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.1 |
hpEnvGroupA collection of objects providing environmental information applicable to all devices. Unknown .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.2 |
hpConfigGroupA collection of objects providing configuration information applicable to all devices. Unknown .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.3 |
hpStatusGroupA collection of objects providing statistics applicable to all HP J8162A XL Access Controller Module like devices. Unknown .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.4 |
hpNotificationsConfigGroupA collection of objects providing notification configuration information applicable to all devices. Unknown .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.5 |
hpNotificationsGroupnotifications for primary failover, and authorization failures, applicable to all devices. Unknown .1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.6 |