HPICF-IPSLA-MIB
AI MIB Summary
The HPICF-IPSLA-MIB enables monitoring and management of IP Service Level Agreement (SLA) performance metrics, such as jitter, latency, packet loss, and MOS scores, on HP networking infrastructure. This proprietary module facilitates the tracking of active probe sessions and the evaluation of network service quality against defined thresholds.
This MIB module contains HP proprietary objects for managing IP Service Level Agreement (SLA).
Main OID:
hpicfIpSla.1.3.6.1.4.1.11.2.14.11.5.1.127
56
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
hpicfIpSlaThis MIB module contains HP proprietary objects for managing IP Service Level Agreement (SLA). MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.127 |
hpicfIpSlaNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.127.0 |
hpicfIpSlaThresholdexceededThis notification is generated when the metric calculated from the SLA result exceeds the configured threshold value. The hpicfIpSlaThrUpper is not applicable when hpicfIpSlaThrMetricType is set to packetLoss or testCompletion. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.5.1.127.0.1 |
hpicfIpSlaTestCompletionThis notification is generated when the SLA test is completed either by reaching stopTime or hpicfIpSlaAttrNumPkts. This notification is sent only when the action type is set to trap or trap-log. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.5.1.127.0.2 |
hpicfIpSlaThresholdPktLossThis notification is generated when SLA test probe reply packets are lost consecutively for the configured number of hpicfIpSlaThrCount. This notification is sent only when the action type is set to trap or trap-log. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.5.1.127.0.3 |
hpicfIpSlaObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.127.1 |
hpicfIpSlaTableThis table specifies IP SLA test parameters as SLA entries. SEQUENCE OF HpicfIpSlaEntry .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1 |
hpicfIpSlaEntryAn entry on this table specifies the destination IP address/ Hostname, Source address, Source Interface ID & Row status corresponding to each SLA test. HpicfIpSlaEntry .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1 |
hpicfIpSlaIDThis is an identifier for the IP SLA. Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.1 |
hpicfIpSlaTypeSLA Probe Type. IcmpEcho is similar to ping protocol and the destination should be enabled with responder functionality for udpEcho, udpJitter, udpJitterVoIP and tcpConnect.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.2 |
hpicfIpSlaAdminStateEnable or disable the IP Service Level Agreement (SLA) probe.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.3 |
hpicfIpSlaSourceAddressTypeSLA source address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.4 |
hpicfIpSlaSourceAddressSLA source address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.5 |
hpicfIpSlaL4SourcePortSLA source port to be used for SLA probes that use a transport layer such as udpEcho, udpJitter, udpJitterVoIP and tcpConnect. The allowed range is from 1024 to 65535.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.6 |
hpicfIpSlaSourceInterfaceSLA source interface.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.7 |
hpicfIpSlaDestAddressTypeSLA destination address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.8 |
hpicfIpSlaDestAddressSLA destination address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.9 |
hpicfIpSlaL4DestPortPort on target device which responds back to the probe. This is used for SLA probes that use a transport layer such as udpEcho, udpJitter, udpJitterVoIP and tcpConnect SLA types. The allowed range is from 1024 to 65535.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.10 |
hpicfIpSlaRowStatusSLA row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.11 |
hpicfIpSlaAttrTableThis table specifies IP SLA test parameters as SLA entries. SEQUENCE OF HpicfIpSlaAttrEntry .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2 |
hpicfIpSlaAttrEntryAn entry on this table specifies the attributes of SLA test such as scheduling parameters, TOS, payload size, history bucket size and inter packet interval, corresponding to each SLA test. HpicfIpSlaAttrEntry .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1 |
hpicfIpSlaSchedStartTimeTimestamp to denote when to start this SLA probe.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.1 |
hpicfIpSlaSchedEndTimeTimestamp to denote when to end this SLA probe.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.2 |
hpicfIpSlaSchedFreqFrequency in seconds. This value is used to send probes.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.3 |
hpicfIpSlaSchedRepeatNumber of times this test will be repeated.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.4 |
hpicfIpSlaAttrTOSType of service value to be set for the probe packet.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.5 |
hpicfIpSlaAttrHistorySizeNumber of history records to be maintained for SLA test. Size can vary from 1 to 50.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.6 |
hpicfIpSlaAttrPayloadSizeSize of the packet payload to be sent out for each probe. It can be set from 10 to 1440.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.7 |
hpicfIpSlaAttrNumPktsNumber of packets to be sent out for a single probe.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.8 |
hpicfIpSlaAttrPktIntervalInter packet interval to be used for packets that are sent out for a single probe. This value is not applicable if the hpicfIpSlaAttrNumPkts is set to 1.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.9 |
hpicfIpSlaAttrRowStatusSLA attribute row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.10 |
hpicfIpSlaThrTableThis table specifies IP SLA threshold-action parameters as entries. When one of the monitored parameters of an SLA test goes beyond the configured thresholds, notifications are generated either as traps or syslog messages. SEQUENCE OF HpicfIpSlaThrEntry .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3 |
hpicfIpSlaThrEntryAn entry on this table specifies the Metric type, upper and lower limit of thresholds, threshold type and action to be taken. HpicfIpSlaThrEntry .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1 |
hpicfIpSlaThrMetricTypeSLA metric type to be monitored. The rtt type is the round trip time of the probe packet. The jitter type is the inter-packet delay variance. The srcTodstTime type is the one-way trip time from source to destination. The dstTosrcTtime type is the one-way trip time from destination to source. The Mean Opinion Scores (MOS) type is derived only for udpJitterVoIP SLA. The Calculated Planning Impairment Factor (ICPIF) type is derived only for udpJitterVoIP SLA. The packetLoss type is to monitor loss of communication. The testCompletion type is for notifying about the completion of probe test. Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.1 |
hpicfIpSlaThrUpperAcceptable upper-limit of threshold value for SLA. This value is not applicable when hpicfIpSlaThrMetricType is set to packetLoss and testCompletion.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.2 |
hpicfIpSlaThrLowerAcceptable lower-limit of threshold value for SLA. This value is not applicable when hpicfIpSlaThrMetricType is set to packetLoss and testCompletion.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.3 |
hpicfIpSlaThrTypeConfigure threshold type to trigger action. This value is not applicable when hpicfIpSlaThrMetricType is set to testCompletion.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.4 |
hpicfIpSlaThrCountConfigure the count of the number of times the threshold value can cross the upper/lower limits. This value is applicable only if hpicfIpSlaThrType is set to consecutive.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.5 |
hpicfIpSlaThrActionThe action to be taken when the threshold value exceeds the limit.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.6 |
hpicfIpSlaThrRowStatusThreshold table row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.7 |
hpicfIpSlaRespTableThis table specifies IP SLA responder parameters as entries. SEQUENCE OF HpicfIpSlaRespEntry .1.3.6.1.4.1.11.2.14.11.5.1.127.1.4 |
hpicfIpSlaRespEntryAn entry on this table specifies the local IP address, port number and row status corresponding to each SLA responder config. HpicfIpSlaRespEntry .1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1 |
hpicfIpSlaRespTypeThe SLA responder type. The udpEcho and tcpConnect objects are for UDP and TCP packets, respectively. The udpJitter and udpJitterVoIP values calculate one-way delay, therefore a timestamp has to be embedded while replying back. This is one of the indexes for the hpicfIpSlaRespTable. Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.1 |
hpicfIpSlaRespAddressTypeSLA responder IP address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.2 |
hpicfIpSlaRespAddressThe local IP address to which the responder is bound. This is one of the indexes for the hpicfIpSlaRespTable. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.3 |
hpicfIpSlaRespL4PortL4 port number on hpicfIpSlaRespAddress where the responder listens for probe packets from SLA source. This is one of the indexes for the hpicfIpSlaRespTable. The allowed range is from 1024 to 65535. InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.4 |
hpicfIpSlaRespRowStatusSLA responder row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.5 |
hpicfIpSlaConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.127.2 |
hpicfIpSlaGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.127.2.1 |
hpicfIpSlaGroupA mandatory group with a set of IP SLA objects. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.1 |
hpicfIpSlaAttrGroupA group with a set of IP SLA attribute objects. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.2 |
hpicfIpSlaThrGroupA group with a set of IP SLA threshold objects. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.3 |
hpicfIpSlaRespGroupA group with a set of IP SLA responder objects. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.4 |
hpicfIpSlaNotificationsGroupA collection of IP SLA source and responder notifications objects. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.5 |
hpicfIpSlaCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.127.2.2 |
hpicfIpSlaComplianceThe compliance statement for HP switches that support IP SLA. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.127.2.2.1 |