HP-ICF-RIPNG-MIB
This is a HP proprietary MIB module to describe the RIPng protocol.
Main OID:
hpicfRipng.1.3.6.1.4.1.11.2.14.11.5.1.113
46
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
hpicfRipngThis is a HP proprietary MIB module to describe the RIPng protocol. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.113 |
hpicfRipngNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.113.0 |
hpicfRipngIfStateChangeA hpicfRipngIfStateChange notification signifies that there has been a change in the state of a RIPng interface. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.5.1.113.0.1 |
hpicfRipngIfConfigErrorA hpicfRipngIfConfigError notification signifies that a packet has been received on an interface from a router whose configuration parameters conflict with this router's configuration parameters. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.5.1.113.0.2 |
hpicfRipngIfRxBadPacketA hpicfRipngIfRxBadPacket notification signifies that a RIPng packet that cannot be parsed has been received on this interface. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.5.1.113.0.3 |
hpicfRipngObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.113.1 |
hpicfRipngBaseScalars OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1 |
hpicfRipngGlobalRouteChangesThe number of changes to the RIPng routing table, excluding the age refresh.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.1 |
hpicfRipngGlobalQueriesThe number of responses received from other systems that are sent to the RIPng queries.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.2 |
hpicfRipngAdminStatusThe admin status of the RIPng routing protocol.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.3 |
hpicfRipngDefaultMetricThe default metric value for the routes that are redistributed by RIPng.rw Integer32 ( 1..15 ) .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.4 |
hpicfRipngDistanceThe administrative distance to associate with routes learned by RIPng. Routes with distances lower than the other peers in the network are preferred.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.5 |
hpicfRipngUpdateTimeThis timer defines the interval between RIPng update messages.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.6 |
hpicfRipngTimeoutTimeThis timer defines the route aging time. If no update message related to that route is received within this period, the metric of this route is set to 16 in the routing table.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.7 |
hpicfRipngGarbageCollectTimeThe garbage-collect timer defines the time interval when the metric of a route is 16 to the time when it is deleted from the routing table.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.8 |
hpicfRipngNotificationEnableA four-octet string serving as a bit map for the trap events defined by the RIPng traps. This object is used to enable or disable specific RIPng traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0. Trap Name BitMap ---------------------------------------- RIPNG_IF_STATE_CHANGE 0x00001 RIPNG_INTF_CONFIG_ERROR 0x00002 RIPNG_INTF_RCV_BAD_PKT 0x00004 RIPNG_ALL_TRAPS 0x00008rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.9 |
hpicfRipngIfConfTableA list of the interfaces that require separate configuration in RIPng. SEQUENCE OF HpicfRipngIfConfEntry .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2 |
hpicfRipngIfConfEntryA single routing domain in a single subnet. HpicfRipngIfConfEntry .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1 |
hpicfRipngIfConfIndexThe interface index of this RIPng interface. It corresponds to the interface index of the IPv6 interface on which RIPng is configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.1 |
hpicfRipngIfConfInstIdThis will allow multiple instances of RIPng to run on the same device. Currently, only one instance is supported. Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.2 |
hpicfRipngIfConfMetricThe RIPng metric for this interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.3 |
hpicfRipngIfConfStatusThe row status variable for the hpicfRipngIfConf table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.4 |
hpicfRipngIfConfSrcAddressTypeThe address type for hpicfRipngIfConfSrcAddress. Only IPv6 addresses without a zone index value are accepted.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.5 |
hpicfRipngIfConfSrcAddressThe link-local IPv6 address that this system will use as a source address on this interface.ro InetAddress .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.6 |
hpicfRipngIfConfDoPoisonReverseA flag indicating whether the router should perform poison reverse on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.7 |
hpicfRipngPeerTableA list of RIPng peers. SEQUENCE OF HpicfRipngPeerEntry .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3 |
hpicfRipngPeerEntryInformation regarding a single routing peer. HpicfRipngPeerEntry .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1 |
hpicfRipngPeerAddressTypeThe address type for hpicfRipngPeerAddress. Only IPv6 addresses without a zone index are expected. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.1 |
hpicfRipngPeerAddressThe IPv6 address that the peer is using as its source address. On an unnumbered link, this IPv6 address might not be a member of any subnet on the system. InetAddress .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.2 |
hpicfRipngPeerLastUpdateThe value of sysUpTime when the most recent RIPng update was received from this peer.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.3 |
hpicfRipngPeerRcvBadPacketsThe number of RIPng invalid response packets that are received from this peer.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.4 |
hpicfRipngNotificationEntry OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.113.1.4 |
hpicfRipngConfigErrorTypePotential types of configuration conflicts. Used by hpicfRipngConfigError notifications.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.1 |
hpicfRipngPacketTypeRIPng packet types.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.2 |
hpicfRipngPacketSrcTypeThe address type for hpicfRipngPacketSrc.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.3 |
hpicfRipngPacketSrcThe IPv6 address of an inbound packet that cannot be identified by a peer instance. Only IPv6 addresses without a zone index are expected.ro InetAddress .1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.4 |
hpicfRipngIfStateRIPng interface state types.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.5 |
hpicfRipngConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.113.2 |
hpicfRipngCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.113.2.1 |
hpicfRipngComplianceThe compliance statement for HP routing switches that support RIPng. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.113.2.1.1 |
hpicfRipngGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.113.2.2 |
hpicfRipngBaseScalarsGroupThis group lists the basic scalars that are required for the RIPng configuration. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.1 |
hpicfRipngIfConfGroupThis group lists the interface configuration of RIPng systems. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.2 |
hpicfRipngPeerGroupA collection of objects that lists peer information. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.3 |
hpicfRipngNotificationObjectGroupA collection of objects that are used to record RIPng notification parameters. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.4 |
hpicfRipngNotificationGroupA collection of objects that lists RIPng notifications. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.5 |