HP-SN-VSRP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
52
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
snVsrpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1 |
IMPORTS Unknown .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1 |
snVsrpGroupOperModeVsrpThe VSRP is configured on this system either enabled or
disabled and thedefault is disabled mode.
disabled(0)..........disable VSRP
enabled(1)...........activate VSRPrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.1 |
snVsrpIfStateChangeTrapIndicates whether the SNMP agent process is
permitted to generate VSRP interface state change
traps.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.2 |
snVsrpIfMaxNumVridPerIntfIndicates the maximum number of VRID per interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.3 |
snVsrpIfMaxNumVridPerSystemIndicates the maximum number of VRID per system.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.4 |
snVsrpClearVrrpStatClear VSRP statistics command.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.5 |
snVsrpIfIntf OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2 |
snVsrpIfTableThe VSRP Interface Table describes the interfaces from
the viewpoint of VSRP. SEQUENCE OF SnVsrpIfEntry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1 |
snVsrpIfEntryThe VSRP Interface Entry describes one interface from
the viewpoint of VSRP. SnVsrpIfEntry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1 |
snVsrpIfVlanIdVlan index.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.1 |
snVsrpIfAuthTypeThe authentication type of this interface.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.2 |
snVsrpIfAuthPasswordThe simple text password is allowed if only if
the snVsrpIfAuthType type is simpleTextPasswd.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.3 |
snVsrpVirRtr OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3 |
snVsrpVirRtrTableThe vsrp virtual router Entry describes one virtual router from
the viewpoint of vsrp. SEQUENCE OF SnVsrpVirRtrEntry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1 |
snVsrpVirRtrEntryThe vsrp virtual router Entry describes one virtual router from
the viewpoint of vsrp. SnVsrpVirRtrEntry .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1 |
snVsrpVirRtrVlanIdVlan index.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.1 |
snVsrpVirRtrIdOne of the virtual router ID of this vsrp interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.2 |
snVsrpVirRtrOwnershipThe ownership of this vsrp router interface
can be set to backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this vsrp router interface.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.3 |
snVsrpVirRtrCfgPriorityThe higher the number the higher the priority is.
This parameter decides which backup router should becomes
the Active Router for the interface. A backup Router with
higher priority selected to becomes the Active Router.
Therefore, this Object can be set if only if snVsrpVirRtrOwnership
is set to backup(2).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.4 |
snVsrpVirRtrTrackPriorityThe higher the number the higher the priority is.
after this object is configured, the snVsrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
changes from UP to DOWN.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.5 |
snVsrpVirRtrCurrPriorityThe higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.6 |
snVsrpVirRtrHelloIntTime interval between advertisements (seconds).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.7 |
snVsrpVirRtrDeadIntDead interval (seconds).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.8 |
snVsrpVirRtrPreemptModeThis mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.9 |
snVsrpVirRtrStateThis object specifies the vsrp Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.10 |
snVsrpVirRtrIpAddrMaskThe numbers of IP Addresses of this virtual router of this
interface, this holds good for L3 vsrp.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.11 |
snVsrpVirRtrActivateThis object specifies the vsrp Router's activate command as:
disabled(0)...deactivate this vsrp Router.
enabled(1)....activate this vsrp Router.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.12 |
snVsrpVirRtrTrackPortListThis object specifies the identity of the physical port and virtual ports
whose state is to be monitored. Each port index is
an ifIndex, if there are consecutive 4 or more ifIndex then
they will be encoded like below.
Encoding and decoding scheme is range based:
Each range prefix with 0000 (2 octets) where 0000 is not valid
ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2
octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
Ex:
port list: 0001..0005 0015 0032..0047
Port list in PDU: 0000 0001 0005 000f 0000 0020 002f.
If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VSRP physical track port membership.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13 |
snVsrpVirRtrAdvertiseBackupSet Advertise this backup router to masterrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.14 |
snVsrpVirRtrHoldDownIntVSRP protection mechanism, an extra delay for a switch in
backup mode to upgrade itself to master moderw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.15 |
snVsrpVirRtrInitTtlVSRP:TTL in the hello packet to regulate the distance that a hello packet
can travel. It prevents the flooding of VSRP hello packets in the networkrw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.16 |
snVsrpVirRtrIncPortListInclude all free ports of the VLAN into its control portsrw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.17 |
snVsrpVirRtrSaveSet VSRP to save current parameters valuerw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.18 |
snVsrpVirRtrBackupIntTime interval between backup routers hello message advertisements (seconds).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.19 |
snVsrpVirRtrRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
VirRtr the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.20 |
snVsrpVirRtrRxArpPktDropCntsThe received vsrp ARP Packet Drop Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.21 |
snVsrpVirRtrRxIpPktDropCntsThe received VSRP IP Packet Drop Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.22 |
snVsrpVirRtrRxPortMismatchCntsThe received vsrp Port mismatching Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.23 |
snVsrpVirRtrRxNumOfIpMismatchCntsThe received VSRP Number of IP Addresses mismatching Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.24 |
snVsrpVirRtrRxIpMismatchCntsThe received vsrp IP Address mismatching Counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.25 |
snVsrpVirRtrRxHelloIntMismatchCntsThe counts of the virtual router interface with hello interval mismatch counts.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.26 |
snVsrpVirRtrRxPriorityZeroFromMasterCntsThe counts of the virtual router interface with Priority zero from the master.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.27 |
snVsrpVirRtrRxHigherPriorityCntsThe counts of the virtual router interface with higher Priority.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.28 |
snVsrpVirRtrTransToMasterStateCntsThe counts of the virtual router interface transition to master state.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.29 |
snVsrpVirRtrTransToBackupStateCntsThe counts of the virtual router interface transition to backup state.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.30 |
snVsrpVirRtrCurrDeadIntCurrent Dead interval (in 100 milliseconds).ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.31 |
snVsrpVirRtrCurHelloIntSet backup router hello intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.32 |
snVsrpVirRtrCurHoldDownIntVSRP protection mechanism, an extra delay for a switch in
backup mode to upgrade itself to master modero INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.33 |
snVsrpVirRtrCurInitTtlVSRP:TTL in the hello packet to regulate the distance that a hello packet
can travel. It prevents the flooding of VSRP hello packets in the networkro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.34 |
snVsrpVirRtrHelloMacAddressHello MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.35 |
snVsrpVirRtrMasterIpAddrThe master router's real/virtual (primary) IP address. This is
the IP address listed as the source in vsrp advertisement
last received by this virtual router.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.36 |