HP-ICF-PIM6
This MIB module contains HP proprietary extensions to the standard PIM MIB (RFC 5060).
Main OID:
hpicfPim6MIB.1.3.6.1.4.1.11.2.14.11.5.1.122
52
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
hpicfPim6MIBThis MIB module contains HP proprietary extensions to the standard PIM MIB (RFC 5060). MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.122 |
hpicfPim6Objects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.122.1 |
hpicfPim6Traps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.122.1.0 |
hpicfPim6 OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1 |
hpicfPim6AdminStatusThe operational status of the PIMv6 routing protocol on this router. Default is disabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.1 |
hpicfPim6StateRefreshIntervalThe interval between successive State Refresh messages originated by this router. Default is 60 seconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.2 |
hpicfPim6TrapControlIndicates whether the PIMv6-enabled router will generate SNMP traps for PIMv6 events. The set bit means 'enabled'. - neighborLoss(0) This bit controls whether the notification trap is allowed to be sent when the neighbor timer expires and the router has no other neighbors on the same interface with a lower IP address than itself. - hardMrtFull(1) This bit controls whether the notification trap is allowed to be sent when the MRT table is full and the error has been originated by hardware.rw Bits .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.3 |
hpicfPim6IfTableHP extensions to the pimInterfaceTable. SEQUENCE OF HpicfPim6IfEntry .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4 |
hpicfPim6IfEntryHP extensions for an entry in the pimInterfaceTable. HpicfPim6IfEntry .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1 |
hpicfPim6IfIndexThe ifindex value of this PIMv6 interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.1 |
hpicfPim6IfAddressTypeThe address type of this PIMv6 interface.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.2 |
hpicfPim6IfAddressThe primary IP address of this router on this PIMv6 interface. The InetAddressType is given by the pimInterfaceAddressType object.rw InetAddress .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.3 |
hpicfPim6IfModeThe configured mode of this PIMv6 interface.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.4 |
hpicfPim6IfTrigHelloIntervalThe maximum time before this router sends a triggered PIMv6 Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value defined in the PIM-SM specification. A value of zero has no special meaning and indicates that triggered PIMv6 Hello messages should always be sent immediately.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.5 |
hpicfPim6IfHelloHoldtimeThe value set in the Holdtime field of PIMv6 Hello messages transmitted on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of hpicfPim6InterfaceHelloInterval,or 65535 if hpicfPim6InterfaceHelloInterval is set to zero.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.6 |
hpicfPim6IfLanPruneDelayTurns the LAN Prune Delay options ON and OFF, on this interface. Default is true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.7 |
hpicfPim6IfPropagationDelayThe expected propagation delay between PIMv6 routers on this network or link.This router inserts this value into the Propagation_Delay messages sent on this interface. Implementations SHOULD enforce a lower bound on the permitted values for this object to allow for scheduling and processing delays within local router.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.8 |
hpicfPim6IfOverrideIntervalThe value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIMv6 Hello messages it sends on this interface. When overriding a prune, PIMv6 routers pick a random timer up to the value of this object. The more PIMv6 routers that are active on a network,the more likely it is that the prune will be overridden after a small proportion of this time has elapsed. The more PIMv6 routers are active on this network, the larger this object should be to obtain an optimal spread of prune override latencies.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.9 |
hpicfPim6IfGenerationIDTurns the Generation ID option ON and OFF, on this interface. Default is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.10 |
hpicfPim6IfJoinPruneHoldtimeThe value inserted into the Holdtime field of a PIMv6 Join/Prune message sent on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the value of hpicfPim6JoinPruneInterval, or 65535 if hpicfpiPim6JoinPruneInterval is set to zero. PIMv6-DM implementations are recommended to use the value of hpicfPim6IfPruneLimitInterval.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.11 |
hpicfPim6IfGraftRetryIntervalThe minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value defined in the PIMv6-DM specification. This object is used only by PIMv6-DM.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.12 |
hpicfPim6IfMaxGraftRetriesThe maximum number of times this router will re-send a Graft on this interface. Default is 2.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.13 |
hpicfPim6IfSRTTLThresholdThe Time To Live in a PIMv6-DM State Refresh message at which it is not forwarded on this interface. Default is 0.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.14 |
hpicfPim6IfLanDelayEnabledEvaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.15 |
hpicfPim6IfSRCapableEvaluates to TRUE if all routers on this interface are using the State Refresh Capable Option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.16 |
hpicfPim6IfNBRTimeoutTime interval after which the router will consider a neighbor to not be present, if no PIM Hello messages arrived on the interface. Default is 180 seconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.17 |
hpicfPim6IfNBRCountPIMv6 Neighbor Count.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.18 |
hpicfPim6IfNegotiatedPropagationDelayNegotiated PIMv6 LAN/Propagation Delay (ms).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.19 |
hpicfPim6IfNegotiatedOverrideIntervalNegotiated PIMv6 Override Interval (ms).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.20 |
hpicfPim6IfAssertHoldIntervalPIMv6 Assert Hold Interval (s).ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.21 |
hpicfPim6IfNumRoutersNotUsingLanDelayNumber of routers on network not using LAN Delay.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.22 |
hpicfPim6IfHelloIntervalThe frequency at which PIMv6 Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' interval, and indicates that periodic PIM Hello messages should not be sent on this interface.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.23 |
hpicfPim6IfStatusThe status of this entry. Creating the entry enables PIMv6 on the interface; destroying the entry disables PIMv6 on the interface. This status object can be set to active(1) without setting any other columnar objects in this entry. All writeable objects in this entry can be modified when the status of this entry is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.4.1.24 |
hpicfPim6RemoveConfigPIMv6 is halted. This objects clears all existing PIMv6 configuration, intializes the pim config to the default state. SnmpGet on this will always return false. An SnmpSet of false has no effect.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.5 |
hpicfPim6NumStaticRpfEntriesTotal number of Static RPF entries.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.6 |
hpicfPim6VersionCurrently running PIM Version.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.7 |
hpicfPim6StarGEntriesTotal number of entries in the (*,G) tablero Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.8 |
hpicfPim6SGEntriesTotal number of entries in the (S,G) table.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.9 |
hpicfPim6TotalNeighborCountPIMv6 Neighbor Count.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.10 |
hpicfPim6JoinPruneIntervalThe default interval at which periodic PIMv6-SM Join/Prune messages are to be sent.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.11 |
hpicfPim6Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.122.2 |
hpicfPim6Groups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.122.2.1 |
hpicfPim6BaseGroupA collection of objects to support basic PIM v6 configuration information on HP routers. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.1.1 |
hpicfPim6DenseIfGroupA collection of objects that extends objects defined in pimInterfaceTable and used to support management of interfaces operating in PIMv6 Dense Mode. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.1.2 |
hpicfPim6InterfaceExtensionsGroupA collection of objects that extends objects defined in pimInterfaceTable. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.1.3 |
hpicfPim6StaticRpfExtensionsGroupA collection of objects that extend hpicfPim6StaticRpfTable. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.1.4 |
hpicfPim6GlobalCounterGroupA collection of global PIMv6 counter objects. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.1.5 |
hpicfPim6Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.122.2.2 |
hpicfPim6DenseMIBComplianceThe compliance statement for HP routers running PIMv6 Dense Mode and implementing the HP-ICF-PIM6 MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.2.1 |
hpicfPim6UcastRoutingComplianceThe compliance statement for HP routers running PIMv6 and related Unicast routing info. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.2.2 |
hpicfPim6GlobalCountersComplianceThe compliance statement for HP routers running PIMv6 and related global statistics data. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.2.3 |
hpicfPim6InterfaceInfoComplianceThe compliance statement for HP routers running PIMv6 and related interface and neighbor info. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.122.2.2.4 |