HP-ICF-IP-ROUTING
AI MIB Summary
The HP-ICF-IP-ROUTING MIB module enables monitoring and management of IP routing tables, protocol states, and forwarding metrics on HP proprietary Intelligent Control Framework (ICF) network devices.
This MIB module contains HP proprietary objects for managing IP Routing.
Main OID:
hpicfIpRouting.1.3.6.1.4.1.11.2.14.11.5.1.15
105
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
105 total| Object Name |
|---|
hpicfIpRoutingThis MIB module contains HP proprietary objects for managing IP Routing. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.15 |
hpicfIpRoutingObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1 |
hpicfIcmpRdisc OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1 |
hpicfRdiscAdminStatusThe administrative status of the ICMP Router Discovery protocol.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.1 |
hpicfRdiscIfCfgTablePer-interface configuration for the ICMP Router Discovery protocol. SEQUENCE OF HpicfRdiscIfCfgEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2 |
hpicfRdiscIfCfgEntryRouter discovery configuration information for a single interface. HpicfRdiscIfCfgEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1 |
hpicfRdiscIfAdminStatusThe administrative status of the ICMP Router Discovery protocol on this interface.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.1 |
hpicfRdiscIfAdvertAddressThe destination address to be used for router advertisements on this interface. If the value of this object is 'multicast' (the default), router advertisements sent on this interface will be sent to the all-hosts multicast address, 224.0.0.1. If the value of this object is 'broadcast', router advertisements sent on this interface will be sent to the limitied broadcast address, 255.255.255.255.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.2 |
hpicfRdiscIfMaxAdvertIntervalThe maximum time allowed between sending unsolicited Router Advertisements on this interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.3 |
hpicfRdiscIfMinAdvertIntervalThe minimum time allowed between sending unsolicited Router Advertisements on this interface. Must be no greater than hpicfRdiscMaxAdvertInterval.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.4 |
hpicfRdiscIfAdvertLifetimeThe value to b placed in the Lifetime field of Router Advertisements sent on this interface. Must be no less than hpicfRdiscMaxAdvertInterval.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.5 |
hpicfRdiscIfPreferenceThe preferability of the router as a default router, relative to the other routers on the same subnet. Higher values are more preferable. The minimum value (0x80000000) is used to indicate that the router, even though it may be advertised, is not to be used by neighboring hosts as a default router.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.6 |
hpicfIcmpRateLimits OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.2 |
hpicfIcmpBoxLimits OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1 |
hpicfIcmpReplyLimitEnableEnable/Disable ICMP replies.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.1 |
hpicfIcmpReplyLimitThe maximum number of icmp replies to send per second.rw INTEGER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.2 |
hpicfIcmpRedirectEnableEnable/Disable redirect error messages..rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.3 |
hpicfIcmpDestUnreachEnableEnable/Disable destination unreachable error messages.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.4 |
hpicfIcmpAddrMaskReplyEnableEnable/Disable address mask replies.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.5 |
hpicfIcmpEchoBroadcastReplyEnableEnable/Disable echo replies to directed broadcast echo requests..rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.6 |
hpicfGlobalIpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.3 |
hpicfDBroadcastFwdEnableEnable/disable directed broadcast forwarding.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.1 |
hpicfSourceRouteEnableEnable/disable source routed forwarding.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.2 |
hpicfIpMaximumPathsMaximum number of equal cost paths to a destination that we will add to the IP routing table.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.3 |
hpicfIpStaticRouteConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4 |
hpicfIpStaticRouteTableTable of configured IP static routes. This table uses a protocol-independent format, so that it can be used for both IPv4 and IPv6 static routes. Rows configured in this table should be stored in non-volatile storage. SEQUENCE OF HpicfIpStaticRouteEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1 |
hpicfIpStaticRouteEntryA row in the static route table, containing information about a single configured static route. There are 3 legal cases for the indexing this table: 1. ((hpicfIpStaticRouteFwdAddrType == hpicfIpStaticRoutePrefixType) && (hpicfIpStaticRouteFwdAddr is IP address of appropriate type) && (hpicfIpStaticRouteFwdIfIndex == 0)) Normal, remote static route. hpicfIpStaticRouteType will be equal to 'remote'. Note that the first condition that the FwdAddrType must equal the PrefixType exactly is not strictly true. For example, in IPv6, it is quite legal and expected to configure a static route where the PrefixType is ipv6, and the Prefix is a 16 byte IPv6 destination address, but the FwdAddrType is ipv6z and the FwdAddr is a 20 byte scoped IPv6 link-local address. 2. ((hpicfIpStaticRouteFwdAddrType == 'unknown') && (hpicfIpStaticRouteFwdAddr == zero-length string) && (hpicfIpStaticRouteFwdIfIndex != 0)) Interface route. Treated like a connected route. hpicfIpStaticRouteType will be equal to 'local'. 3. ((hpicfIpStaticRouteFwdAddrType == 'unknown') && (hpicfIpStaticRouteFwdAddr == zero-length string) && (hpicfIpStaticRouteFwdIfIndex == 0)) Discard route. hpicfStaticRouteType will be equal to either 'reject' or 'discard'. HpicfIpStaticRouteEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1 |
hpicfIpStaticRoutePrefixTypeThe type of destination prefix specified by this route. The value 'dns(16)' is not supported. This object specifies the type of destination address prefix in the hpicfIpStaticRoutePrefix object. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.1 |
hpicfIpStaticRoutePrefixThe destination address prefix of this route. The type of address specified by this route is indicated by the corresponding instance of the hpicfIpStaticRoutePrefixType object. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticRoutePrefixType must be rejected. An attempt to create a row in which the value X of this object, logically ANDed with the value of the mask formed from the corresponding instance of the hpicfIpStaticRoutePrefixLength object, is not equal to X must be rejected, i.e., this prefix may not have any 'host' bits set. InetAddress .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.2 |
hpicfIpStaticRoutePrefixLengthThis object indicates the number of leading one bits which form the mask to be logically ANDed with a destination address before comparison with the corresponding instance of the hpicfIpStaticRoutePrefix object for a route match operation. An attempt to create a row in which the value of this object is longer than the maximum legal length of an address of the type indicated by the corresponding instance of the hpicfIpStaticRoutePrefixType object must be rejected. An attempt to create a row in which the value of the mask formed from this object logically ANDed with the value of the corresponding instance of the hpicfIpStaticRoutePrefix object is not equal to the hpicfIpStaticRoutePrefix. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.3 |
hpicfIpStaticRouteFwdAddrTypeThe type of forwarding address for this route. The value of this object must be equal either to 'unknown' or to a value appropriate for the corresponding instance of the hpicfIpStaticRoutePrefixType object. For non-remote routes, the value of this object must be 'unknown'. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.4 |
hpicfIpStaticRouteFwdAddrFor remote routes, the value of the next specified router to use for forwarding packets to the destination specified by this route. Note that this router does not need to be directly connected. In the case where it is not, the actual routing table entry will use a next hop determined by looking up the best route to this forwarding address. For non-remote routes, the value of this object will be a zero-length string. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticRouteFwdAddrType must be rejected. An attempt to create a row with a value for this object other than a zero-length string must be rejected if the corresponding instance of the hpicfIpStaticRouteFwdIfIndex object is non-zero. InetAddress .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.5 |
hpicfIpStaticRouteFwdIfIndexFor remote routes, the value of this object must be zero. For reject or blackhole routes, the value of this object must be zero. For local routes, this object indicates the ifIndex of the local interface to use to reach this destination. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.6 |
hpicfIpStaticRouteTypeThe type of route. The value 'other' is not supported, and is included only for compatiblity with the IP Forwarding Table MIB. The value 'local' indicates that the destination is treated as if it were directly connected. The value 'remote' indicates that the forwarding address will be used to reach the destination. The value 'reject' indicates that if this route is matched, a packet to the destination is discarded and a notification (e.g. ICMP error) is returned to the packet sender. The value 'blackhole' indicates that if the route is matched, a packet to the destination is silently dropped. The value of this object must be consistent with the forwarding address information used to index the route.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.7 |
hpicfIpStaticRouteDistanceThe administrative distance to associate with this static route. Routes with lower distances are preferred. By default, static routes are created with an administrative distance of 1, meaning they are preferred over all routes except directly connected routes. Setting a higher administrative distance for a route can be used for the following reasons: - by configuring multiple static routes to the same destination, one with the default distance and one with a higher distance, one can configure backup static routes - by configuring a static route with an administrative distance higher than the distance for a particular dynamic routing protocol, one can allow a static route to be overridden by dynamic routing information. Routes with an administrative distance of 255 will never be entered in the routing table.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.8 |
hpicfIpStaticRouteTagTag value that can be used to filter redistribution of this route via route maps.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.9 |
hpicfIpStaticRouteStatusStatus of this route entry. All writable columns in this table can be modified while the corresponding row is active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.10 |
hpicfIpStaticNeighborTableTable of configured IP static neighbors. This table uses a protocol-independent format, so that it can be used for both IPv4 and IPv6 static neighbors. Rows configured in this table should be stored in non-volatile storage. SEQUENCE OF HpicfIpStaticNeighborEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2 |
hpicfIpStaticNeighborEntryA row in the static neighbor table, containing information about a single configured static neighbor. HpicfIpStaticNeighborEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1 |
hpicfIpStaticNeighborIfIndexThe ifIndex value for the interface used to reach this neighbor. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.1 |
hpicfIpStaticNeighborNetAddrTypeThe type of network address specified by this entry. Only the values 'ipv4(1)' and 'ipv6(2)' are expected. This object specifies the type of neighbor network address prefix in the hpicfIpStaticNeighborNetAddress object. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.2 |
hpicfIpStaticNeighborNetAddressThe neighbor network address of this configured static neighbor. The type of address specified by this entry is indicated by the corresponding instance of the hpicfIpStaticNeighborNetAddrType object. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticNeighborNetAddrType must be rejected. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.3 |
hpicfIpStaticNeighborPhysAddressThe media-dependent physical address used to reach this neighbor. The size of this address depends on the media type of the interface identified by hpicfIpStaticNeighborIfIndex.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.4 |
hpicfIpStaticNeighborStatusStatus of this neighbor entry. All writable columns in this table can be modified while the corresponding row is active.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.5 |
hpicfIpRouteStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.5 |
hpicfIpCidrRouteTableHP extensions to the ipCidrRouteTable. SEQUENCE OF HpicfIpCidrRouteEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1 |
hpicfIpCidrRouteEntryExtended information about a single route. HpicfIpCidrRouteEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1.1 |
hpicfIpCidrRouteDistanceThe administrative distance of this route.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1.1.1 |
hpicfInetCidrRouteTableHP extensions to the inetCidrRouteTable. SEQUENCE OF HpicfInetCidrRouteEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2 |
hpicfInetCidrRouteEntryExtended information about a single route. HpicfInetCidrRouteEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1 |
hpicfInetCidrRouteDistanceThe administrative distance of this route.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1.1 |
hpicfInetCidrRouteInfoA reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's inetCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.ro OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1.2 |
hpicfArpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.6 |
hpicfArpAgingTimeThe timeout period in minutes for aging out an arp entry in the arp cache. Default value is 20 minutes. Allowable values for the HP implementation are 1-1440 and 0. The value of 0 indicates that an infinite ageout is to be used. The value 16666666 minutes (32 years) is used internally to effectively indicate an infinite timeout.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.6.1 |
hpicfIpDefaultRouterPrefixInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7 |
hpicfIpDefaultRouterPrefixTableTable of default routers learnt through auto-config This Table will be used in conjunction of ipDefaultRouterTable defined in RFC 4293 to get the attributes of the default routers learnt through auto-config SEQUENCE OF HpicfIpDefaultRouterPrefixEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1 |
hpicfIpDefaultRouterPrefixEntryA row in the default router table, containing information about a single learnt default router HpicfIpDefaultRouterPrefixEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1 |
hpicfIpDefaultRouterAddressTypeThe address type of the default router. The only supported type is IPV6 as of now InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.1 |
hpicfIpDefaultRouterAddressThe address of the default router. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.2 |
hpicfIpDefaultRouterIfIndexThe address of the default router. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.3 |
hpicfIpDefaultRouterPrefixTypeType of the prefix. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.4 |
hpicfIpDefaultRouterPrefixThe prefix. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.5 |
hpicfIpDefaultRouterPrefixLengthLength of the prefix. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.6 |
hpicfIpDefaultRouterPrefixOnLinkThe object has the value true (1) if the prefix can be used for on-link determination, otherwise the value is false(2)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.7 |
hpicfIpDefaultRouterPrefixAutonomousThe object has the value true(1) if this prefix can be used for autonomous address configuration. If the value is false(2), the prefix is not used to autoconfigure a local interface addressro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.8 |
hpicfIpDefaultRouterPrefixValidLifeTimeThe valid life time for the router.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.9 |
hpicfIpDefaultRouterPrefixPrefdLifeTimeThe preferred life time for the router.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.10 |
hpicfIpDefaultRouterProperties OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.8 |
hpicfIpDefaultRouterTableHP extensions to the ipDefaultRouterTable. SEQUENCE OF HpicfIpDefaultRouterEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1 |
hpicfIpDefaultRouterEntryExtended information about a single route. HpicfIpDefaultRouterEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1 |
hpicfIpDefaultRouterMTUThe link MTU size advertised by the router. The selected Mlink TU may be different from this one.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1.1 |
hpicfIpDefaultRouterHopLimitThe hop limit to be used by the host on outgoing packets.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1.2 |
hpicfIpv6ND OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9 |
hpicfIpv6NDRAAdminStatusA flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.1 |
hpicfIpv6RtrAdvPrefixTableThis table describes the router advertisement configuration variables for each interface. SEQUENCE OF HpicfIpv6RtrAdvPrefixEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2 |
hpicfIpv6RtrAdvPrefixEntryAn entry in the hpicfIpv6RtrAdvPrefixTable. HpicfIpv6RtrAdvPrefixEntry .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1 |
hpicfIpv6RtrAdvPrefixIfIndexThe index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.1 |
hpicfIpv6RtrAdvPrefixTypeThe address type of hpicfIpv6RtrAdvPrefixPrefix. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.2 |
hpicfIpv6RtrAdvPrefixPrefixThe address prefix. The address type of this object is specified in hpicfIpv6RtrAdvPrefixType. The length of this object is the standard length for objects of that type. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.3 |
hpicfIpv6RtrAdvPrefixLengthThe prefix length associated with this prefix. The value 0 has no special meaning for this object. It simply refers to address '::/0'. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.4 |
hpicfIpv6RtrAdvPrefixOnLinkFlagRouter Advertisement messages are sent out with the On-Link flag (L-bit) field set to this value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.5 |
hpicfIpv6RtrAdvPrefixAutonomousFlagAutonomous address configuration flag. Router Advertisement messages are sent out with the autonomous flag field set to this value in the Prefix Information.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.6 |
hpicfIpv6RtrAdvPrefixLifetimeTypeSpecifies if the hpicfIpv6RtrAdvPrefixPreferredLifetime and hpicfIpv6RtrAdvPrefixValidLifetime are of the kind where consecutive advertisements have the same time(fixed) or a time that decrements in real time. The realTime(2) can be used to specify a time in future at which the LifeTimes become zero.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.7 |
hpicfIpv6RtrAdvPrefixPreferredLifetimeThe length of time ,in seconds,that this prefix will be preferred. A value of 4,294,967,295 represents infinity. The Router Advertisement messages are sent out with the Preferrend LifeTime field set to this value. To specify in a realTime way,set this object to a future time in number of seconds since January 1, 1970, Coordinated Universal Time and also set The default value is 7 days(604800 seconds) fixed timerw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.8 |
hpicfIpv6RtrAdvPrefixValidLifetimeThe length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The Router advertisement messages are sent out with the Valid LifeTime field set to this value. To specify in a realTime way,set this object to a future time in number of seconds since January 1, 1970, Coordinated Universal Time and also set hpicfIpv6RtrAdvPrefixTimeType to realTime. The default value is 30 days (or 2592000 seconds) fixed time.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.9 |
hpicfIpv6RtrAdvPrefixRowStatusThe status of this conceptual row. As all objects in this conceptual row have default values a row can be created and made active by setting this object appropriately.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.10 |
hpicfIpRoutingConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.2 |
hpicfIpRoutingGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1 |
hpicfRdiscBaseGroupBasic ICMP Router Discovery configuration objects. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.1 |
hpicfRdiscIfCfgGroupA collection of objects allowing per-interface configuration of ICMP Router Discovery operation. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.2 |
hpicfIcmpReplyBaseGroupA collection of objects allowing configuration of ICMP Redirect operation. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.3 |
hpicfIcmpReplyLimitGroupA collection of objects allowing configuration of ICMP Reply rate limiting. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.4 |
hpicfIpRouteCfgGroupA collection of objects allowing configuration of IP global enables. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.5 |
hpicfIpStaticRouteGroupA collection of objects for configuring IP static routes. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.6 |
hpicfIpStaticNeighborGroupA collection of objects for configuring IP static neighbors. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.7 |
hpicfIpCidrRouteGroupA collection of objects for retrieving extended information about routes in the routing table. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.8 |
hpicfInetCidrRouteGroupA collection of objects for retrieving extended information about routes in the routing table. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.9 |
hpicfArpBaseGroupBasic ARP (address resolution protocol) configuration objects. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.10 |
hpicfIpv6RtrAdvPrefixGroupThe group of objects in a table for configuring the Router Advertisement options. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.11 |
hpicfIpRoutingCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.15.2.2 |
hpicfIcmpRdiscComplianceThe compliance statement for HP Routing switches that support ICMP Router Discovery. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.1 |
hpicfIcmpReplyComplianceThe compliance statement for HP Routing switches that support ICMP Reply Limiting. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.2 |
hpicfIpRouterComplianceThe compliance statement for HP Routing switches. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.3 |
hpicfArpInfoComplianceThe compliance statement for HP Routing switches that support ARP. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.4 |
hpicfIpv6RtrAdvPrefixComplianceThe compliance statement for HP Routing switches that support Router Advertisements Unknown .1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.5 |