HP-ICF-UDLD-MIB
AI MIB Summary
The HP-ICF-UDLD-MIB enables management of Unidirectional Link Detection (UDLD) parameters on HP networking devices to monitor link status states and configure aggressive or normal detection modes for preventing unidirectional data flow.
This MIB module describes objects to configure the Unidirectional Link Detection (UDLD) feature.
Main OID:
hpicfUdldMIB.1.3.6.1.4.1.11.2.14.11.5.1.33
33
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
hpicfUdldMIBThis MIB module describes objects to configure the Unidirectional Link Detection (UDLD) feature. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.33 |
hpicfUdldNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.33.0 |
hpicfUdldNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.33.0.0 |
hpicfUdldLinkfaultThis notification is generated when the link failure occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.5.1.33.0.0.1 |
hpicfUdldLinkUpThis notification is generated when UDLD link goes from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.5.1.33.0.0.2 |
hpicfUdldObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.33.1 |
hpicfUdldConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.33.1.1 |
hpicfUdldConfigTimeIntervalThe interval in seconds at which the UDLD enabled ports exchange proprietary pulse packet. Here 10 is 1 sec, 11 is 1.1 sec, and so on. The default value for hpicfUdldConfigTimeInterval object is 5 seconds.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.1 |
hpicfUdldConfigMaxRetriesMaximum number of retries to wait for a response. The default value for hpicfUdldConfigMaxRetries object is 4.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.2 |
hpicfUdldPortConfigTableThe table that controls UDLD status on individual ports. SEQUENCE OF HpicfUdldPortConfigEntry .1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.3 |
hpicfUdldPortConfigEntryAn entry in the hpicfUdldPortConfigTable. HpicfUdldPortConfigEntry .1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.3.1 |
hpicfUdldPortAdminStatusThe hpicfUdldPortAdminStatus can be enabled/disabled The value enable(1) means that UDLD is enabled. the value disable(2) means that UDLD is disabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.3.1.1 |
hpicfUdldPortVlanIdThe vlan id associated with tagged UDLD control packets. The value of 0 indicates that UDLD control packets are untagged.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.3.1.2 |
hpicfUdldStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2 |
hpicfUdldPortStatsTableA table containing UDLD statistics for individual ports. SEQUENCE OF HpicfUdldPortStatsEntry .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1 |
hpicfUdldPortStatsEntryUDLD statistics for a particular physical port. HpicfUdldPortStatsEntry .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1 |
hpicfUdldStatsPortCurrentStateThe desired status of UDLD on a port. If the associated hpicfUdldStatsPortCurrentState object has a value of 'offline(1)', then the port or udld is administratively disabled. If the associated hpicfUdldStatsPortCurrentState object has a value of 'failure(2)', then the port and udld are administratively enabled, but udld packets are not being received successfully. Link may or may not be present. If the associated hpicfUdldStatsPortCurrentState object has a value of 'up(3)', then udld is enabled and udld packets are being received successfully in both directions.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.1 |
hpicfUdldStatsPortNeighborMACThe MAC address of the adjacent switch.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.2 |
hpicfUdldStatsPortNeighborPortThe port number of the adjacent switch.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.3 |
hpicfUdldStatsPortTotalTxThe number of UDLD control packets sent from this port.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.4 |
hpicfUdldStatsPortTotalRxThe number of UDLD control packets received on this port.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.5 |
hpicfUdldStatsPortNumStateChangeThe number of state transitions.ro Counter32 .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.6 |
hpicfUdldStatsPortStatusThe value of this object indicates whether the port is blocked by UDLD or not.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.7 |
hpicfUdldStatsClearAllWhen the value of this object is set to TRUE, the UDLD transmit, receive and state change statistics are cleared. A get request for this object always returns FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.2 |
hpicfUdldConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.33.2 |
hpicfUdldCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.33.2.1 |
hpicfUdldComplianceThe compliance statement for SNMP entities which implement the UDLD MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.33.2.1.1 |
hpicfUdldCompliance2The compliance statement for SNMP entities that implement the UDLD MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.33.2.1.2 |
hpicfUdldGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.33.2.2 |
hpicfUdldPortConfigGroupThe collection of objects which are used to configure the UDLD implementation behavior. This group is mandatory for ports which implement the UDLD. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.33.2.2.1 |
hpicfUdldPortStatsGroupThe collection of objects which are used to represent UDLD statistics. This group is mandatory for ports which implement the UDLD. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.33.2.2.2 |
hpicfUdldNotificationGroupNotification used for signaling change in Link state. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.33.2.2.3 |
hpicfUdldStatsGroupThe collection of objects that are used to perform operations on UDLD related statistics. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.33.2.2.4 |