HP-ICF-RELOAD-MIB
AI MIB Summary
The HP-ICF-RELOAD-MIB enables SNMP-based monitoring and control of reload operations for HP Integrated Communication Facility hardware devices, specifically tracking reload status, trigger events, and device state transitions to facilitate remote system recovery and maintenance.
This MIB module describes objects for basic management of reloading devices in the HP Integrated Communication Facility product line.
Main OID:
hpicfReloadMIB.1.3.6.1.4.1.11.2.14.11.1.4.20
17
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
hpicfReloadMIBThis MIB module describes objects for basic management of reloading devices in the HP Integrated Communication Facility product line. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.1.4.20 |
hpicfReloadObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.4.20.1 |
hpicfReloadStateThis object specifies the state of the device. If it is in: (1) 'no reload' was scheduled (2) 'reload after' was scheduled (3) 'reload at' was scheduled To cancel the scheduled reload, this object needs to be set with (1). NOTE: This object cannot be set with (2) or (3).When hpicfReloadAfter or hpicfReloadAt is scheduled the state of hpicfReloadState is automatically changed to (2) or (3) respectively.rw Enumeration .1.3.6.1.4.1.11.2.14.11.1.4.20.1.1 |
hpicfReloadAfterThe object specifies the time in seconds after which reload will occur.If no reload is scheduled it returns -1. To schedule a reload/reboot, time in seconds is entered and 0 for immediate reload. When hpicfReloadAfter is scheduled the state of hpicfReloadState is changed to reloadAfter automatically. NOTE: If hpicfReloadAt or hpicfReloadAfter is already scheduled, it will automatically be cancelled and the new hpicfReloadAfter is scheduled.rw Integer32 .1.3.6.1.4.1.11.2.14.11.1.4.20.1.2 |
hpicfReloadAtThe object specifies the time and date at which reload will occur. To schedule a reload in the future, the time and date at which reload needs to occur should be given. When hpicfReloadAt is scheduled it will change the state of hpicfReloadState to reloadAt. NOTE: If hpicfReloadAt or hpicfReloadAfter is already scheduled, it will automatically be cancelled and the new hpicfReloadAt is scheduled.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.1.4.20.1.3 |
hpicfEntityReload OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.4.20.2 |
hpicfReloadTableThis table contains a row for different entities and shows the control operation and the latest reload time for that entity. SEQUENCE OF HpicfReloadEntry .1.3.6.1.4.1.11.2.14.11.1.4.20.2.2 |
hpicfReloadEntryInformation about Reload table. HpicfReloadEntry .1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1 |
hpicfReloadControlThis specifies the control action for this entityrw ReloadControl .1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1.1 |
hpicfReloadDateTimeThe object specifies the time and date at which the last reload will occuredro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1.2 |
hpicfReloadConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.4.20.3 |
hpicfReloadGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.4.20.3.1 |
hpicfReloadGroupA collection of objects for reload command. Unknown .1.3.6.1.4.1.11.2.14.11.1.4.20.3.1.1 |
hpicfReloadCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.4.20.3.2 |
hpicfReloadFullCompliance1The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the Reload application. Unknown .1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.1 |
hpicfReloadFullCompliance2The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP. Unknown .1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.2 |
hpicfReloadReadOnlyCompliance1The compliance statement for SNMP entities which implement the hpicfReload MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the syslog application. Unknown .1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.3 |