HP-ICF-SRCIP-MIB
This MIB module contains the definitions of HP proprietary Managed Objects used for managing HP Routing switches with implemented source IP address administrative control.
Main OID:
hpicfSrcIpMIB.1.3.6.1.4.1.11.2.14.11.1.13
14
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
hpicfSrcIpMIBThis MIB module contains the definitions of HP proprietary Managed Objects used for managing HP Routing switches with implemented source IP address administrative control. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.1.13 |
hpicfSrcIpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.13.1 |
hpicfSrcIpAddrPolicyTableA table of entries used to configure the policy for selecting source IP address for different application protocols while transmitting the protocol specific IP packets. When the entry is configured the outgoing IP packets generated by the corresponding application protocol will have the source IP address field modified based on the configured policy option. SEQUENCE OF HpicfSrcIpAddrPolicyEntry .1.3.6.1.4.1.11.2.14.11.1.13.1.1 |
hpicfSrcIpAddrPolicyEntryAn entry in the 'hpicfSrcIpAddrPolicyTable' containing information about a source IP address selection policy. HpicfSrcIpAddrPolicyEntry .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1 |
hpicfSrcIpAddressTypeType of IP address. The only values expected are ipv4 or ipv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.1 |
hpicfSrcIpProtocolIndexThe application protocol index value which uniquely identifies a row in the 'hpicfSrcIpAddrPolicyTable'. Enumeration .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.2 |
hpicfSrcIpAddrPolicyThe policy for selecting the source IP address. outgoingInterface - the IP address of outgoing interface should be used as the source. This is the default behavior if no other policy is configured. configuredIpAddr - the specific IP address configured on one of the switch's IP interfaces (VLAN or loopback) should be used as the source. configuredInterface - an IP address configured on the specified IP interface (VLAN or loopback) should be used as the source. In case of multi-netted interface the lexicographically lowest IP address will be used.rw Enumeration .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.3 |
hpicfSrcIpAddrIfIndexIndex of IP interface whose IP address should be used as source IP while sending application protocol packets. On multi-netted interface the lexicographically lowest IP address will be used. This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.4 |
hpicfSrcIpAddressAdministratively assigned IP address that should be used as source while sending application protocol packets. This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5 |
hpicfSrcIpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.13.2 |
hpicfSrcIpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.13.2.1 |
hpicfSrcIpBaseGroupA collection of objects allowing configuration of policies for selecting source IP address for application protocols. Unknown .1.3.6.1.4.1.11.2.14.11.1.13.2.1.1 |
hpicfSrcIpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.1.13.2.2 |
hpicfSrcIpComplianceThe core compliance statement for HP Routing switches with source IP address administrative control. Unknown .1.3.6.1.4.1.11.2.14.11.1.13.2.2.1 |
More MIBs from HP
Browse all HPMIBs →BLADETYPE6-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE6-NETWORK-MIB.
2263 objects→
BLADETYPE5-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE5-NETWORK-MIB.
2240 objects→
BLADETYPE4-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE4-NETWORK-MIB.
2226 objects→
HPN-ICF-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HPIPFTRAP-MIB
Standard SNMP MIB module defining data structures for HPIPFTRAP-MIB.
1186 objects→
BLADETYPE2-NETWORK-MIB
The BLADETYPE2-NETWORK-MIB module provides SNMP access to Layer 3 configuration parameters, interface statistics, and routing information for blade server network interfaces. It enables monitoring of IP address assignments, interface operational states, and packet counters specific to the blade chassis network subsystem.
1056 objects→