HP-ICF-SYSLOG-MIB
The MIB module for configuring and monitoring syslog applications. The HP syslog application sends syslog messages.
Main OID:
hpicfSyslogMIB.1.3.6.1.4.1.11.2.14.14.1
95
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
95 total| Object Name |
|---|
hpicfSyslogMIBThe MIB module for configuring and monitoring syslog applications. The HP syslog application sends syslog messages. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.14.1 |
hpicfSyslogNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.0 |
hpicfSyslogStatusChangedThis notification is sent when any of the objects listed are accessed. For example, when the first server address is entered, the application starts [hpicfSyslogOperationsStatus is ''started'' ]. When the last server address is removed, the syslog application stops [hpicfSyslogOperationsStatus is ''stopped'']. The value of hpicfSyslogOperationsStatus will be the new status of the syslog application after the change. Another example, when a server address is added, a notification is sent indicating the index used to store the row information, as well as the address type, the address itself, the description if given , and the row status. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.14.1.0.1 |
hpicfSyslogObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1 |
hpicfSyslogControlTableA table containing the configuration parameters pertaining to the hpicfSyslog applications serviced by an SNMP agent. SEQUENCE OF HpicfSyslogControlEntry .1.3.6.1.4.1.11.2.14.14.1.1.1 |
hpicfSyslogControlEntryThe configuration parameters pertaining to a syslog application. HpicfSyslogControlEntry .1.3.6.1.4.1.11.2.14.14.1.1.1.1 |
hpicfSyslogControlIndexThe Index that uniquely identifies the syslog application in the hpicfSyslogControlTable. The value of the index for a syslog application may not be the same across system reboots. Users and applications will need to determine the index of a syslog application after system reboots. Initial implementation allows integers (1..6). Integer32 .1.3.6.1.4.1.11.2.14.14.1.1.1.1.1 |
hpicfSyslogControlDescrA user definable description of the syslog application. This description could be used by syslog management applications e.g. in reports or in user interfaces. For the description to be persistent across reboots, the conceptual row must be in the 'active' state. Also, refer to note in hpicfSyslogControlRowStatus, for additional limitations.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.11.2.14.14.1.1.1.1.2 |
hpicfSyslogControlBindAddrTypeThe type of Internet address which follows in hpicfSyslogControlBindAddr. Currently only IPv4 is supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.14.1.1.1.1.3 |
hpicfSyslogControlBindAddrThe specific address the syslog sender will bind to. The format of the address is specified by the corresponding hpicfSyslogControlBindAddrType object.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.14.1.1.1.1.4 |
hpicfSyslogControlRowStatusThis object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is in state ''active'' or in ''notInService''. The other objects in a row can be modified only when the value of this object in the corresponding conceptual row is not ''active''. Thus to modify one or more of the objects in this conceptual row, a. change the row status to ''notInService'', b. change the values of the row c. change the row status to ''active'' The hpicfSyslogControlRowStatus may be changed to ''active'' if all the managed objects in the conceptual row with MAX-ACCESS read-create have been assigned valid values. The information in each conceptual row is only persist across reboots if the row status is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.14.1.1.1.1.5 |
hpicfSyslogControlBindAddrIsOobmThis object indicates the specific address to which syslog sender will bind is on OOBM interface. This mib object will be applicable only if there is a physical OOBM port on the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.14.1.1.1.1.6 |
hpicfSyslogControlSmmLogThis object is applicable for a device with a standby management module like 8200zl. When the value of this object is set to enabled, all the log messages from the standby management module(SMM) will be sent to the syslog server. If the value is disabled, the log messages from the standby management module will not be sent to the syslog server. By default, this is disabled.rw Enumeration .1.3.6.1.4.1.11.2.14.14.1.1.1.1.7 |
hpicfSyslogControlTransportProtocolThe transport used for the connection to the syslog server associated with this row. The default value is UDP.rw Enumeration .1.3.6.1.4.1.11.2.14.14.1.1.1.1.8 |
hpicfSyslogControlDestinationPortThe port used for the communication to the syslog server associated with this row. The default syslog ports for UDP is 514, the default syslog for TCP is 1470, and will be based on the setting of the TransportProtocol object.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.14.1.1.1.1.9 |
hpicfSyslogOperations OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1.2 |
hpicfSyslogOperationsMsgsTransmittedThe number of messages transmitted by the syslog sender. This does not include the messages that could not be queued for transmission by the hpicfSyslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.2.1 |
hpicfSyslogOperationsMsgsDroppedThe number of messages that could not be queued for transmission by the syslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.2.2 |
hpicfSyslogOperationsLastMsgTransmittedTimeThe value of sysUpTime when the last message was transmitted by the hpicfSyslog sender. If no messages have been transmitted by this syslog application, since the last re-initialization of the local management subsystem, then this object will have a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.14.1.1.2.3 |
hpicfSyslogOperationsStartTimeThe value of sysUpTime when this syslog application was started.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.14.1.1.2.4 |
hpicfSyslogOperationsLastErrorA description of the last error related to sending a syslog message that was encountered by this syslog application. If no error has been encountered by this syslog application then the value of this object will be a zero-length string. If no error has been encountered by this syslog application since the last re-initialization of the local management subsystem then the value of this object will be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.11.2.14.14.1.1.2.5 |
hpicfSyslogOperationsLastErrorTimeThe value of sysUpTime when the last error was encountered. If no error has been encountered by this syslog application since the last re-initialization of the local management subsystem, then this object will have a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.14.1.1.2.6 |
hpicfSyslogOperationsCounterDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which any one or more of this syslog application's counters, viz., counters with OID prefix 'hpicfSyslogOperationsMsgsTransmitted' or 'hpicfSyslogOperationsMsgsDropped' suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.14.1.1.2.7 |
hpicfSyslogOperationsStatusThe status of the syslog application.ro Enumeration .1.3.6.1.4.1.11.2.14.14.1.1.2.8 |
hpicfSyslogPriority OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1.3 |
hpicfSyslogPriorityFacilityThe facility value of this entry. This value will be returned in all syslog message, regardless of the process/daemon that originates the message.rw HpicfSyslogFacility .1.3.6.1.4.1.11.2.14.14.1.1.3.1 |
hpicfSyslogPrioritySeverityThe severity value of this entry. Used to filter 'event' messages.rw HpicfSyslogSeverity .1.3.6.1.4.1.11.2.14.14.1.1.3.2 |
hpicfSyslogPriorityDescrA textual description of this priority entry.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.11.2.14.14.1.1.3.3 |
hpicfSyslogSystemModuleA system module value of this entry. Used to filter 'event' messages.rw HpicfSyslogSystemModule .1.3.6.1.4.1.11.2.14.14.1.1.3.4 |
hpicfSyslogStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1.4 |
hpicfSyslogGeneralStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1.4.1 |
hpicfSyslogGeneralLogSentNumber of syslog messages sent by the syslog sender.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.1.1 |
hpicfSyslogGeneralLogRecvNumber of syslog messages received by the syslog Server.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.1.2 |
hpicfSyslogGeneralLogRelayThe number of messages processed by the syslog relay.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.1.3 |
hpicfSyslogGeneralSendErrorNumber of syslog messages that failed during the send process and this failed message will be buffered for the retransmission process.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.1.4 |
hpicfSyslogGeneralLogResendNumber of syslog messages re-transmitted successfully.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.1.5 |
hpicfSyslogGeneralResendErrorNumber of syslog messages that failed during the retransmission process.The syslog retransmission will happen if and only if syslog send failed while transmitting the buffered syslog messages.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.1.6 |
hpicfSyslogGeneralLogBufferedCurrent number of buffered syslog messages that are ready to be transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.1.7 |
hpicfSyslogSeverityStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1.4.2 |
hpicfSyslogSeverityCounterInfoTableA table containing the syslog severity statistics counter value. SEQUENCE OF HpicfSyslogSeverityCounterInfoEntry .1.3.6.1.4.1.11.2.14.14.1.1.4.2.1 |
hpicfSyslogSeverityCounterInfoEntryThe configuration parameters pertaining to a syslog severity statistics. HpicfSyslogSeverityCounterInfoEntry .1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1 |
hpicfSyslogSeverityTypeIndexThe Index that uniquely identifies the syslog severity type. Integer32 .1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.1 |
hpicfSyslogSeverityTypeThe severity type for all the syslog messages.ro HpicfSyslogSeverity .1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.2 |
hpicfSyslogSeverityCounterNumber of messages transmitted per severity.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.3 |
hpicfSyslogFacilityStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1.4.3 |
hpicfSyslogFacilityCounterInfoTableA table containing the syslog facility statistics counter values. SEQUENCE OF HpicfSyslogFacilityCounterInfoEntry .1.3.6.1.4.1.11.2.14.14.1.1.4.3.1 |
hpicfSyslogFacilityCounterInfoEntryThe configuration parameters pertaining to a syslog facility statistics. HpicfSyslogFacilityCounterInfoEntry .1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1 |
hpicfSyslogfacilityCounterIndexThe Index that uniquely identifies the syslog facility. Integer32 .1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.1 |
hpicfSyslogfacilityTypeThe facility type for all the syslog messages.ro HpicfSyslogFacility .1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.2 |
hpicfSyslogfacilityCounterNumber of syslog messages transmitted per facilty.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.3 |
hpicfSyslogLogMsgOptions OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1.5 |
hpicfSyslogClearLogWhen the value of this object is set to TRUE, all the log messages will be cleared. A write operation of FALSE leads to a no operation hence A get request for this object always returns FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.14.1.1.5.1 |
hpicfSyslogServerStatisticsTableA table containing the statistical information pertaining to each syslog server indexed by hpicfSyslogControlIndex. SEQUENCE OF HpicfSyslogServerStatisticsEntry .1.3.6.1.4.1.11.2.14.14.1.1.6 |
hpicfSyslogServerStatisticsEntryThe configuration parameters pertaining to a syslog application. HpicfSyslogServerStatisticsEntry .1.3.6.1.4.1.11.2.14.14.1.1.6.1 |
hpicfSyslogServerLogSentNumber of syslog messages sent by the syslog sender.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.6.1.1 |
hpicfSyslogServerLogRecvNumber of syslog messages received by the syslog Server.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.6.1.2 |
hpicfSyslogServerLogRelayThe number of messages processed by the syslog relay.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.6.1.3 |
hpicfSyslogServerSendErrorNumber of syslog messages that failed during the send process and this failed message will be buffered for the retransmission process.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.6.1.4 |
hpicfSyslogServerLogResendNumber of syslog messages re-transmitted successfully.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.6.1.5 |
hpicfSyslogServerResendErrorNumber of syslog messages that failed during the retransmission process.The syslog retransmission will happen if and only if syslog send failed while transmitting the buffered syslog messages.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.6.1.6 |
hpicfSyslogServerLogBufferedCurrent number of buffered syslog messages that are ready to be transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.14.1.1.6.1.7 |
hpicfSyslogAlerts OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.1.7 |
hpicfSyslogAlertsTableA table of entries containing configuration information for transmitting alerts in syslog messages. SEQUENCE OF HpicfSyslogAlertsEntry .1.3.6.1.4.1.11.2.14.14.1.1.7.1 |
hpicfSyslogAlertsEntryAn entry in the 'hpicfSyslogAlertsTable'. HpicfSyslogAlertsEntry .1.3.6.1.4.1.11.2.14.14.1.1.7.1.1 |
hpicfSyslogAlertIndexThe index which uniquely identifies a row in the 'hpicfSyslogAlertsTable'. runningCfgChg - the alert type indicating that a change was made made to the switch's running configuration. Enumeration .1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.1 |
hpicfSyslogAlertAdminStatusIndicates whether the syslog application is permitted to generate given type of alerts in transmitted syslog messages. Default is disabled.rw Enumeration .1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.2 |
hpicfSyslogAlertTransmitIntervalSpecifies the transmission interval in seconds for sending alerts in syslog messages. Only one syslog message is allowed for transmission within this time interval. Default value is 0, indicating there is no rate limit for alerts transmission.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.3 |
hpicfSyslogConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.3 |
hpicfSyslogGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.3.1 |
hpicfSyslogOperationsGroupA collection of objects providing message related statistics. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.1 |
hpicfSyslogControlGroupA collection of objects representing the run time parameters for the syslog applications. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.2 |
hpicfSyslogPriorityGroupA collection of objects representing the priority groupings of hpicfSyslog messages. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.3 |
hpicfSyslogNotificationGroupA collection of notifications about the operational state of a syslog application. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.5 |
hpicfSyslogControlGroupOobmA collection of objects representing the run time parameters for the OOBM aware syslog applications. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.6 |
hpicfSyslogGeneralStatisticsGroupA collection of objects representing the general statistics counter information. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.7 |
hpicfSyslogSeverityStatisticsGroupA collection of objects representing the severity statistics counter information. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.8 |
hpicfSyslogFacilityStatisticsGroupA collection of objects representing the facility statistics counter information. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.9 |
hpicfSyslogControlGroupSmmA collection of objects representing the log message for the standby module. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.10 |
hpicfSyslogLogMsgOptionsGroupA collection of objects representing the log message information. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.11 |
hpicfSyslogControlTransportGroupA collection of objects representing the run time parameters for the transport applications. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.12 |
hpicfSyslogServerStatisticsGroupA collection of objects representing the server specific statistics counter information. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.13 |
hpicfSyslogPriorityGroup1A collection of object for syslog priority. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.14 |
hpicfSyslogAlertsGroupA collection of objects representing syslog alerts information. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.1.15 |
hpicfSyslogCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.14.1.3.2 |
hpicfSyslogFullCompliance1The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the syslog application. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.1 |
hpicfSyslogFullCompliance2The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.2 |
hpicfSyslogReadOnlyCompliance1The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the syslog application. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.4 |
hpicfSyslogReadOnlyCompliance2The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.5 |
hpicfSyslogNotificationComplianceThe compliance statement for SNMP entities which implement the SYSLOG-MIB and support only notifications about change in the operational status of a syslog application. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.7 |
hpicfSyslogFullComplianceOobmThe compliance statement for syslog server configuration with support for OOBM. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.8 |
hpicfSyslogStatisticsComplianceThe compliance statement for SNMP entities which implement the syslog statistics. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.9 |
hpicfSyslogSmmLogMsgComplianceThe compliance statement for syslog log messages for standby module. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.10 |
hpicfSyslogTransportComplianceThe compliance statement for syslog transport . Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.11 |
hpicfSyslogPriorityComplianceThe compliance statement for syslog priority . Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.12 |
hpicfSyslogAlertsComplianceThe compliance statement for syslog alerts. Unknown .1.3.6.1.4.1.11.2.14.14.1.3.2.14 |