HP-SN-IPX-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
113
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
snIpxGen OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 |
snIpxRoutingModeEnabled/Disabled System IPX Routing Mode status.rw RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1 |
snIpxNetBiosFilterModeEnabled/Disabled NetBios Filter Mode status.rw RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2 |
snIpxClearCacheclear(1) will clear cache table.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3 |
snIpxClearRouteclear(1) will clear ipx route table.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4 |
snIpxClearTrafficCntsclear(1) will clear ipx all traffic counters.
- snIpxRcvPktsCnt, snIpxFwdPktsCnt,
snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt,
snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt.rw ClearStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5 |
snIpxRcvPktsCntIPX incoming packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6 |
snIpxTxPktsCntIPX Outgoing packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7 |
snIpxFwdPktsCntIPX forwarding packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8 |
snIpxRcvDropPktsCntIPX receiving drop packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9 |
snIpxRcvFiltPktsCntIPX receiving filter packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10 |
snIpxRipGblFiltListAn IPX RIP Global Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11 |
snIpxRipFiltOnAllPortApply the IPX RIP Global filter list snIpxRipGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all RIP filter lists to/from all ports.
Prior to sending this command, snIpxRipGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 |
snIpxSapGblFiltListAn IPX SAP Global Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13 |
snIpxSapFiltOnAllPortApply the IPX SAP Global filter list snIpxSapGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all SAP filter lists to/from all ports.
Prior to sending this command, snIpxSapGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14 |
snIpxTxDropPktsCntIPX transmitting drop packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15 |
snIpxTxFiltPktsCntIPX transmitting filter packets counter.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16 |
snIpxCache OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2 |
snIpxCacheTableIPX Cache table. SEQUENCE OF SnIpxCacheEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1 |
snIpxCacheEntryAn entry in the IPX Cache table. SnIpxCacheEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1 |
snIpxCacheIndexThe table index for a IPX Cache entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1 |
snIpxCacheNetNumCache Network number.ro NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2 |
snIpxCacheNodeCache Node Number.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3 |
snIpxCacheOutFilterCache Outbound Filter is ether disabled(0) or enabled(1).ro RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4 |
snIpxCacheEncapThe IPX encapsulation frame type.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5 |
snIpxCachePortIPX Router Port number.ro PortIndex .1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6 |
snIpxRoute OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3 |
snIpxRouteTableIPX route table. SEQUENCE OF SnIpxRouteEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1 |
snIpxRouteEntryAn entry in the IPX route table. SnIpxRouteEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1 |
snIpxRouteIndexThe table index for a IPX route entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1 |
snIpxDestNetNumDestination Network number.ro NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2 |
snIpxFwdRouterNodeForward Router Node Number.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3 |
snIpxDestHopCntsNumber of hops to reach the
destination.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4 |
snIpxRouteMetricThe metrics to next hop router.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5 |
snIpxDestPortThe destination port.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6 |
snIpxServer OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4 |
snIpxServerTableIPX Server table. SEQUENCE OF SnIpxServerEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1 |
snIpxServerEntryAn entry in the IPX Server table. SnIpxServerEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1 |
snIpxServerIndexThe table index for a IPX Server entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1 |
snIpxServerTypeIPX Server Type.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2 |
snIpxServerNetNumServer Network number.ro NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3 |
snIpxServerNodeServer Node Number.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4 |
snIpxServerSocketServer Socket Number.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5 |
snIpxServerHopCntsNumber of intervening networks to reach the
server.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6 |
snIpxServerNameIPX Server Name.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7 |
snIpxFwdFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5 |
snIpxFwdFilterTableIPX Forward Filter table. SEQUENCE OF SnIpxFwdFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1 |
snIpxFwdFilterEntryAn entry in the IPX Forward Filter table. SnIpxFwdFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1 |
snIpxFwdFilterIdThe filter ID for a filter entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1 |
snIpxFwdFilterActionAction to take if the ipx packet match
with this filter.rw Action .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2 |
snIpxFwdFilterSocketIPX Forward Filter Socket Number.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3 |
snIpxFwdFilterSrcNetSource Network Number.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4 |
snIpxFwdFilterSrcNodeSource Node Number.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5 |
snIpxFwdFilterDestNetDestination Network Number.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6 |
snIpxFwdFilterDestNodeDestination Node Number.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7 |
snIpxFwdFilterRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 |
snIpxRipFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6 |
snIpxRipFilterTableIPX RIP Filter table. SEQUENCE OF SnIpxRipFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1 |
snIpxRipFilterEntryAn entry in the IPX RIP Filter table. SnIpxRipFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1 |
snIpxRipFilterIdThe filter ID for a filter entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1 |
snIpxRipFilterActionAction to take if the ipx packet match
with this filter.rw Action .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2 |
snIpxRipFilterNetIPX RIP Filter Network number.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3 |
snIpxRipFilterMaskIPX RIP Filter Network/Subnet Mask.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4 |
snIpxRipFilterRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5 |
snIpxSapFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7 |
snIpxSapFilterTableIPX SAP Filter table. SEQUENCE OF SnIpxSapFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1 |
snIpxSapFilterEntryAn entry in the IPX SAP Filter table. SnIpxSapFilterEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1 |
snIpxSapFilterIdThe filter ID for a filter entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1 |
snIpxSapFilterActionAction to take if the ipx packet match
with this filter.rw Action .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2 |
snIpxSapFilterTypeIPX SAP Filter type to be matched.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3 |
snIpxSapFilterNameIPX SAP Filter Name.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4 |
snIpxSapFilterRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5 |
snIpxIfFwdAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8 |
snIpxIfFwdAccessTableIPX IF Forward Access table. SEQUENCE OF SnIpxIfFwdAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1 |
snIpxIfFwdAccessEntryAn entry in the IPX Forward Access table. SnIpxIfFwdAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1 |
snIpxIfFwdAccessPortThe IPX interface to which the Forward Filter applies.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1 |
snIpxIfFwdAccessDirThe access direction of incoming packet filter
or outgoing packet filter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2 |
snIpxIfFwdAccessFilterListAn IPX IF Forward Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3 |
snIpxIfFwdAccessRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4 |
snIpxIfRipAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9 |
snIpxIfRipAccessTableIPX IF RIP Access table. SEQUENCE OF SnIpxIfRipAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1 |
snIpxIfRipAccessEntryAn entry in the IPX Forward Access table. SnIpxIfRipAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1 |
snIpxIfRipAccessPortThe IPX interface to which the RIP Filter applies.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1 |
snIpxIfRipAccessDirThe access direction of incoming packet filter
or outgoing packet filter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2 |
snIpxIfRipAccessFilterListAn IPX IF RIP Access Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3 |
snIpxIfRipAccessRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4 |
snIpxIfSapAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10 |
snIpxIfSapAccessTableIPX IF RIP Access table. SEQUENCE OF SnIpxIfSapAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1 |
snIpxIfSapAccessEntryAn entry in the IPX Forward Access table. SnIpxIfSapAccessEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1 |
snIpxIfSapAccessPortThe IPX interface to which the SAP Filter applies.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1 |
snIpxIfSapAccessDirThe access direction of incoming packet filter
or outgoing packet filter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2 |
snIpxIfSapAccessFilterListAn IPX IF SAP Access Filter List.rw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3 |
snIpxIfSapAccessRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4 |
snIpxPortAddr OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11 |
snIpxPortAddrTableIPX port address table. SEQUENCE OF SnIpxPortAddrEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1 |
snIpxPortAddrEntryAn entry in the IPX Port Address table. SnIpxPortAddrEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1 |
snIpxPortAddrPortThe port index for port address entry.ro PortIndex .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1 |
snIpxPortAddrEncapThe IPX encapsulation type.
ethernet8022(1), ethernet8023(2),
ethernetII(3), ethernetSnap(4)
Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
a SNMP-SET error will be returned.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2 |
snIpxPortAddrNetNumAn unique Network number for the IPX interface port.rw NetNumber .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3 |
snIpxPortAddrRowStatusThis object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4 |
snIpxPortAddrNetBiosFilterModeEnabled/Disabled NetBios Filter Mode status per Port Address entry.rw RtrStatus .1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5 |
snIpxPortCounters OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12 |
snIpxPortCountersTableIPX port Counters table. SEQUENCE OF SnIpxPortCountersEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1 |
snIpxPortCountersEntryAn entry in the IPX Port Counters table. SnIpxPortCountersEntry .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1 |
snIpxPortCountersPortThe port index for port Counters entry.ro PortIndex .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1 |
snIpxPortCountersRcvPktsCntIPX incoming packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2 |
snIpxPortCountersTxPktsCntIPX Outgoing packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3 |
snIpxPortCountersFwdPktsCntIPX forwarding packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4 |
snIpxPortCountersRcvDropPktsCntIPX receiving drop packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.5 |
snIpxPortCountersTxDropPktsCntIPX transmitting drop packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.6 |
snIpxPortCountersRcvFiltPktsCntIPX receiving filter packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7 |
snIpxPortCountersTxFiltPktsCntIPX transmitting filter packets counter for the interface.ro Counter .1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8 |