HP-ICF-NTP-MIB
Management information for configuring the NTP client on Hewlett-Packard network devices.
Main OID:
hpicfNtpMIB.1.3.6.1.4.1.11.2.14.11.5.1.121
68
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
hpicfNtpMIBManagement information for configuring the NTP client on Hewlett-Packard network devices. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.121 |
hpicfNtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.121.1 |
hpicfNtpConfigScalars OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1 |
hpicfNtpConfigModeThe current operational mode of the NTP client.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.1 |
hpicfNtpMaxAssociationThe maximum number of associations of the NTP client with different server's.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.2 |
hpicfNtpStatusReferenceTimeFracThe fractional part of the local time at which the local clock was last set or corrected. For example: a timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.3 |
hpicfNtpStatusReferenceTimeSecThe integer part of the local time at which the local clock was last set or corrected. For example: timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.4 |
hpicfNtpStatusClockOffsetThe offset of the system clock, in milliseconds, to the synchronized peer.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.5 |
hpicfNtpStatusRootDelayThe total round-trip delay, in milliseconds, to the primary reference source at the root of the synchronization.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.6 |
hpicfNtpStatusRootDispersionThe root dispersion, in milliseconds, of the running NTP entity.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.7 |
hpicfNtpAssoDriftThis is the rate of change in the system clock offset.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.8 |
hpicfNtpInetConfigServerTableA table containing trusted IPv4 or IPv6 NTP server's to be queried in unicast mode. SEQUENCE OF HpicfNtpInetConfigServerEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2 |
hpicfNtpInetConfigServerEntryThe NTP server description. HpicfNtpInetConfigServerEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1 |
hpicfNtpInetServerAddressTypeThe IP address type of a trusted NTP server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.1 |
hpicfNtpInetServerAddressThe IP address of a trusted NTP server in which client communicates with server to synchorize its time. hpicfNtpInetServerAddress is always interpreted within the context of hpicfNtpInetServerAddressType. InetAddress ( SIZE (4|16) ) .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.2 |
hpicfNtpInetServerRowStatusThe row status of this NTP server information. Supporting CREATEANDGO and DESTROY only.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.4 |
hpicfNtpInetServerAuthKeyIdThe key identifier associated with the NTP server specified by this instance. It is an index to the hpicfntpAuthenticationKeyTable. The value identifies the row in the hpicfntpAuthenticationKeyTable where the authentication key can be found. The value '0' indicates that the key-id is disassociated from the NTP server.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.5 |
hpicfNtpConfigPollMinIntervalPeriod of time between successive attempts to perform an update via NTP.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.6 |
hpicfNtpConfigPollMaxIntervalMaximum period of time between successive attempts to perform an update via NTP.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.7 |
hpicfNtpAssoBurstThis option is used for, to speed up the initial synchronization acquisition with the server, Below are different options supported. noburst - Burst not set, Polling happens with configured or default poll interval. burst - Send a burst of eight packets instead of the usual one packet. The interval between the first and the second packets is about 16 seconds to allow a modem call to complete, while the spacing between the remaining packets is about 2s. iburst - Send a burst of eight packets instead of the usual one. As long as the server is unreachable, the interval between packets is about 16 seconds to allow a modem call to complete. After the server is reachable, the spacing between packets is about 2 seconds.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.8 |
hpicfNtpAssoIsOobmThis object indicates whether this NTP Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.9 |
hpicfNtpInetServerInfoTableA table containing trusted IPv4 or IPv6 NTP server's information. SEQUENCE OF HpicfNtpInetServerInfoEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3 |
hpicfNtpInetServerInfoEntryThe NTP server description. HpicfNtpInetServerInfoEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1 |
hpicfNtpAssoOurPollIntervalPoll interval for this peer.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.1 |
hpicfNtpAssoPeerPollIntervalPoll interval from peer to the local machine.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.2 |
hpicfNtpAssoRootDelayDelay in, milliseconds, to the root of the NTP setup. Stratum 1 clocks are considered to be at the root of an NTP setup/design.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.3 |
hpicfNtpAssoRootDispersionMaximum clock time difference that was ever observed between the local clock and the root clock.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.4 |
hpicfNtpAssoPeerReachThe reachability register of the remote association, in octal format. This number is determined by the NTP algorithm.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.6 |
hpicfNtpAssoOriginTimeFracIt is the fractional part of this client time stamp when the request was sent to the server after the poll interval. For example: a timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.7 |
hpicfNtpAssoOriginTimeSecIt is integer part of this client time stamp when the request was sent to the server after the poll interval. For example: a timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.8 |
hpicfNtpAssoRecvTimeFracThis is fractional part of the time stamp when the local client received the message. The difference between the origin time and the receive time is the offset for this peer. For example: a timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.9 |
hpicfNtpAssoRecvTimeSecThis is the integer part of time stamp when the local client received the message. The difference between the origin time and the receive time is the offset for this peer. For example: a timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.10 |
hpicfNtpAssoXmtTimeFracThis is the fractional part of the server's time stamp for the NTP packet when it sends back the packet to the client. For example: a timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.11 |
hpicfNtpAssoXmtTimeSecThis is the integer part of the server's time stamp for the NTP packet when it sends back the packet to the client. For example: a timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.12 |
hpicfNtpAssolastPollreqThis is the time in seconds since the last NTP packet was received from a peer is reported. This value should be lower than the polling interval.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.13 |
hpicfNtpAssoPrecisionThis is the precision of the peer clock in Hz.ro Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.14 |
hpicfNtpAssoCurrentModeThe current mode of the NTP. The definition of each possible value as follows: notsynchronized(2) - NTP is not synchronized to any time source (stratum = 16). synchronized(1) - NTP is synchronized. unknown(99) - The state of NTP is unknown.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.15 |
hpicfNtpAssoPeerDispersionThe estimated maximum error of the peer clock relative to the local clock over the network path between them, in seconds. This value is determined by using NTP clock-filter algorithm.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.16 |
hpicfNtpAuthenticationKeyTableA table containing entries of authentication key-id. The number of key-id is restricted to 8. SEQUENCE OF HpicfNtpAuthenticationKeyEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.4 |
hpicfNtpAuthenticationKeyEntryAn authentication key entry comprising key-identifiers such as key-id, key-value, authentication mode (MD5/SHA1), and status of the key-id if it is trusted or not. HpicfNtpAuthenticationKeyEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1 |
hpicfNtpAuthenticationKeyIdA unique identifier for the authentication key. Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.1 |
hpicfNtpAuthenticationKeyAuthModeThe authentication mode supported by this key.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.2 |
hpicfNtpAuthenticationKeyValueA unique string that serves as the key-value for generating the message digest sent in the NTP packet. A read on this object will return an empty string.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.3 |
hpicfNtpAuthenticationKeyTrustedThis object is used to configure the status of the authentication key as trusted. If the key-value is not trusted, the packet is not trusted. By default, the key-value is not trusted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.4 |
hpicfNtpAuthenticationKeyRowStatusThe row status for this NTP authentication key instance. The key-id is the index and it cannot be edited. Supporting CREATEANDGO and DESTROY only.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.5 |
hpicfNtpAuthenticationKeyEncryptedThe encrypted form of a unique string that serves as the key-value for generating the message digest sent in the NTP packet. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key previously read from a compatible HP Networking device.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.6 |
hpicfNtpIpv6MulticastTableA table containing entry for enabling NTP multicast. SEQUENCE OF HpicfNtpIpv6MulticastEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.5 |
hpicfNtpIpv6MulticastEntryAn NTP multicast entry comprising NTP multicast on vlan. HpicfNtpIpv6MulticastEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.5.1 |
hpicfNtpIpv6MulticastIndicates whether this interface should listen to NTP multicast packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.121.1.5.1.1 |
hpicfNtpIpv6MulticastStatusRow status of the NTP Multicast. Supporting CREATEANDGO and DESTROY only.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.121.1.5.1.2 |
hpicfNtpAssoSampleTableA table containing samples for association. SEQUENCE OF HpicfNtpAssoSampleEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.7 |
hpicfNtpAssoSampleEntryAn association sample entry comprising 8 samples of each association for filter delay and offset. HpicfNtpAssoSampleEntry .1.3.6.1.4.1.11.2.14.11.5.1.121.1.7.1 |
hpicfNtpAssoSampleIdThe sample Id for every sample per association. Unsigned32 .1.3.6.1.4.1.11.2.14.11.5.1.121.1.7.1.1 |
hpicfNtpfiltDelaySampleThe round trip delay of the sample of this association.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.7.1.2 |
hpicfNtpfiltOffsetSampleThe offset of the sample of this association.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.5.1.121.1.7.1.3 |
hpicfNtpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.121.2 |
hpicfNtpAdminStatusWhen set to true, this enables NTP globally on the router. If set to false, this would disable NTP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.121.2.1 |
hpicfNtpConfigConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.121.3 |
hpicfNtpConfigCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.121.3.1 |
hpicfNtpInetConfigComplianceThe compliance statement for devices implementing the hpicfNtpConfig MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.121.3.1.1 |
hpicfNtpAuthenticationConfigComplianceThe compliance statement for devices implementing the hpicfNtpConfig MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.121.3.1.2 |
hpicfNtpServerConfigComplianceThe compliance statement for devices implementing the hpicfNtpConfig MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.121.3.1.3 |
hpicfNtpAssoSampleComplianceThe compliance statement for devices implementing the hpicfNtpConfig MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.121.3.1.4 |
hpicfNtpConfigGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.121.3.2 |
hpicfNtpConfigGroupA collection of objects for configuring the NTP client. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.121.3.2.1 |
hpicfNtpInetServerConfigGroupA collection of objects for configuring the NTP server entry. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.121.3.2.2 |
hpicfNtpAuthenticationKeyIdConfigGroupThis group defines NTP authentication related information. It includes Key-Identifier, Key-Value, encrypted key value, flag to indicate whether the information is trusted or not and whether the authentication mode(MD5/SHA1) currently supported. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.121.3.2.3 |
hpicfNtpAssociationSampleGroupThis group defines sample information for eight samples taken per association. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.121.3.2.4 |