HP-ICF-OOBM-MIB
AI MIB Summary
The HP-ICF-OOBM-MIB enables monitoring and management of Out-of-Band Management (OOBM) entities on HP Intelligent Management Center (IMC) infrastructure, specifically tracking OOBM session states, interface availability, and device reachability for remote system administration.
The MIB module is for representing Oobm entity
Main OID:
hpicfOobmMIB.1.3.6.1.4.1.11.2.14.11.5.1.58
27
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
hpicfOobmMIBThe MIB module is for representing Oobm entity MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.58 |
hpicfOobmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.0 |
hpicfOobmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.1 |
hpicfOobmScalars OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.1.1 |
hpicfOobmStatusGlobal Oobm (Out Of Band Management) status. By default oobm is globally enabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.58.1.1.1 |
hpicfOobmServers OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.1.2 |
hpicfOobmServerTableThis table contains one row for every server application in the switch entity. SEQUENCE OF HpicfOobmServerEntry .1.3.6.1.4.1.11.2.14.11.5.1.58.1.2.1 |
hpicfOobmServerEntryInformation about Server Application table. HpicfOobmServerEntry .1.3.6.1.4.1.11.2.14.11.5.1.58.1.2.1.1 |
hpicfOobmServerTypeThe index that is used to access the switch server application table. HpicfOobmServerIndex .1.3.6.1.4.1.11.2.14.11.5.1.58.1.2.1.1.1 |
hpicfOobmServerListenModeThe current state of the server application. Default value is Oobm. Depending on the interface on which server application is running, incoming queries will be listened by the switch.rw HpicfOobmServerState .1.3.6.1.4.1.11.2.14.11.5.1.58.1.2.1.1.2 |
hpicfOobmSnmpTargetAddrIsOobm OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.1.3 |
hpicfSnmpTargetAddrIsOobmTableAdds an HpicfSnmpTargetAddrIsOobmEntry to snmpTargetAddrTable. SEQUENCE OF HpicfSnmpTargetAddrIsOobmEntry .1.3.6.1.4.1.11.2.14.11.5.1.58.1.3.1 |
hpicfSnmpTargetAddrIsOobmEntryAdds an HpicfSnmpTargetAddrIsOobmEntry to snmpTargetAddrTable. HpicfSnmpTargetAddrIsOobmEntry .1.3.6.1.4.1.11.2.14.11.5.1.58.1.3.1.1 |
hpicfSnmpTargetAddrIsOobmThis object indicates if the target is reachable over OOBM (Out OF Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.58.1.3.1.1.1 |
hpicfOobmDefGateway OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.1.4 |
hpicfOobmDefGatewayTableThis table contains one row for every default gateway configured for OOBM Interface. SEQUENCE OF HpicfOobmDefGatewayEntry .1.3.6.1.4.1.11.2.14.11.5.1.58.1.4.1 |
hpicfOobmDefGatewayEntryInformation about Default Gateway table. HpicfOobmDefGatewayEntry .1.3.6.1.4.1.11.2.14.11.5.1.58.1.4.1.1 |
hpicfOobmDefGatewayTypeAddress type of default gateway configured for OOBM Interface. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.58.1.4.1.1.1 |
hpicfOobmDefGatewayAddrThe IP Address of the default gateway configured for OOBM interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.58.1.4.1.1.2 |
hpicfOobmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.3 |
hpicfOobmCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.3.1 |
hpicfOobmMibComplianceThe compliance statement for entries which implement the Oobm application servers MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.58.3.1.1 |
hpicfOobmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.58.3.2 |
hpicfOobmScalarsGroupBasic Scalars required in Oobm MIB implementation. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.1 |
hpicfOobmServersGroupOobm Server MIB parameters. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.2 |
hpicfSnmpTargetAddrIsOobmGroupA group of objects to add an HpicfSnmpTargetAddrIsOobmEntry to snmpTargetAddrTable. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.3 |
hpicfOobmDefGatewayGroupOOBM Default Gateway MIB parameters Unknown .1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.4 |