HP-SWITCH-IMAGE-MIB
AI MIB Summary
The HP-SWITCH-IMAGE-MIB monitors firmware integrity and versioning on HP networking switches by exposing flash memory attributes including build date, build number, image size, and the currently running software version. This module enables automated verification of image consistency and rollback readiness across the switch fleet without requiring direct CLI access.
This MIB describes information like build date, image version, build number, image size for the images in the flash(non-volatile memory). This mib will also give similar details for running software version.
Main OID:
hpSwitchImage.1.3.6.1.4.1.11.2.14.11.5.1.59
29
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
hpSwitchImageThis MIB describes information like build date, image version, build number, image size for the images in the flash(non-volatile memory). This mib will also give similar details for running software version. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.59 |
hpSwitchImageObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.59.1 |
hpSwitchDefaultBootThis object describes the default flash boot image. It may be either primary or secondary image.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.59.1.1 |
hpSwitchBootRomVersionThis object describes version details of Monitor Rom Console.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.59.1.2 |
hpSwitchFlashImageTableEach entry of this table describes information like size of image, build date, image version and build number for the images that are present in the flash. Build number is accessible only in debug build. SEQUENCE OF HpSwitchFlashImageEntry .1.3.6.1.4.1.11.2.14.11.5.1.59.1.3 |
hpSwitchFlashImageEntryEach entry describes information like size of image, build date, version and build number. Build number is accessible only in debug build. HpSwitchFlashImageEntry .1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1 |
hpSwitchFlashImageTypeThis object describes flash image type. It may be primary or secondary image. Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.1 |
hpSwitchFlashImageSizeThis object describes the image size in bytes.ro Unsigned32 UNITS "Bytes" .1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.2 |
hpSwitchFlashImageBuildDateThis object describes the date on which this image is built.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.3 |
hpSwitchFlashImageVersionThis object describes the version number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.4 |
hpSwitchFlashImageBuildNumberThis object describes the build number. This object is accessible only in debug build.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.5 |
hpSwitchMgmtModuleVersionTableEach entry of this table describes information like status, image directory path, build date, image version, image build number, boot-image type, build options and watchdog status of the running software version for management modules. In switches other than 8200, only one management module is present. In 8200 switches, two management modules are present. SEQUENCE OF HpSwitchMgmtModuleVersionEntry .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4 |
hpSwitchMgmtModuleVersionEntryThis entry describes information like status, image directory, build date, image version, image build number, boot-image type, build options and watchdog status of the running software version for management modules. HpSwitchMgmtModuleVersionEntry .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1 |
hpSwitchMgmtModuleIDThis module ID object is used to uniquely identify the entry in the table. Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.1 |
hpSwitchMgmtModuleStatusThis object describes the status of the running software version for management module. This status can be active, disabled, standby, offline, failed or unknown.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.2 |
hpSwitchMgmtModuleDirectoryThis object describes the directory path of the running software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.3 |
hpSwitchMgmtModuleDateThis object describes the build date of the running software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.4 |
hpSwitchMgmtModuleVersionThis object describes the version number of the running software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.5 |
hpSwitchMgmtModuleBuildNumberThis object describes the build number of the running software version. This object is accessible only in debug build.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.6 |
hpSwitchMgmtModuleBootImageThis object gives the image type in which switch is booted up recently. It may be primary or secondary image. It gives unknown if neither primary nor secondary image is present.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.7 |
hpSwitchMgmtModuleBuildOptionsThis object describes the build options of the running software version.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.8 |
hpSwitchMgmtModuleWatchDogThis object describes whether watchdog is enabled or disabled for the running software version. This gives unknown if not available.ro Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.9 |
hpSwitchImageConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.59.2 |
hpSwitchImageGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.59.2.1 |
hpSwitchFlashImagesGroupA mandatory group which is required to give the details like image size, image build date, image version, default boot image for the images in the flash. This also gives version of monitor rom console. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.1 |
hpSwitchMgmtModuleGroupA mandatory group which is required to give the details like status, boot directory-path, image build date, image version and boot-image of the running software version for the management modules. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.2 |
hpSwitchBuildGroupThis optional group is accessible only in debug build. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.3 |
hpSwitchImageCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.59.2.2 |
hpSwitchImageComplianceThe compliance statement is for hpSwitchFlashImagesGroup, hpSwitchMgmtModuleGroup and hpSwitchBuildGroup. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.59.2.2.1 |