HP-ICF-URPF-MIB
This MIB module describes objects for management of Unicast Reverse Path Forwarding (URPF).
Main OID:
hpicfUrpfMIB.1.3.6.1.4.1.11.2.14.11.5.1.131
26
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
hpicfUrpfMIBThis MIB module describes objects for management of Unicast Reverse Path Forwarding (URPF). MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.5.1.131 |
hpicfUrpfConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.131.1 |
hpicfUrpfConfigGlobalEnableIs the URPF feature enabled. true(1) - URPF is enabled; false(2) URPF is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.131.1.1 |
hpicfUrpfConfigGlobalLogTimeoutThe time, in seconds, between URPF logging summary messages.rw Integer32 .1.3.6.1.4.1.11.2.14.11.5.1.131.1.2 |
hpicfUrpfConfigTableThe table contains configuration information for URPF processing. SEQUENCE OF HpicfUrpfConfigEntry .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3 |
hpicfUrpfConfigEntryEach table entry contains configuration parameters for an interface and address family. HpicfUrpfConfigEntry .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1 |
hpicfUrpfIfIndexThe interface for the table entry. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.1 |
hpicfUrpfAddrFamilyThe address family for the table entry. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.2 |
hpicfUrpfConfigModeThe URPF match mode. URPF operates in one of two modes: strict and loose. In strict mode, a route to the source address must exist, and the ingress interface of the packet must be the same interface used to egress packets back to the source. For example, the ingress and egress routes are symmetric and must use the same interface. In loose mode, a route to the source address must exist, but the ingress interface of the packet is not checked. none(1) - URPF not applied to the interface; strict(2) - must match expected interface; loose(3) - ingress interface is not checked.rw Enumeration .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.3 |
hpicfUrpfConfigDefRouteAllow use of the default route when checking the ingress port. Enabling use of the default route is only supported in strict mode. If use of the default route was enabled in loose mode, all packets would be allowed, therefore this option is not supported in loose mode. true(1) - enable use of default route in port match; false(2) - disable use of default route in port match.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.4 |
hpicfUrpfConfigAllowDhcpAllow packets with SA=0.0.0.0 and DA=255.255.255.255, such as DHCP and BOOTP, to bypass the URPF checks. true(1) - packets will bypass URPF checks; false(2) packets will be dropped.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.5 |
hpicfUrpfConfigLoggingIs logging of dropped packets enabled. true(1) - logging enabled; false(2) - logging disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.6 |
hpicfUrpfConfigHasWhitelistAclIs a whitelist ACL applied to this interface. true(1) - whitelist ACL applied; false(2) - whitelist ACL not applied.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.7 |
hpicfUrpfConfigWhitelistAclNameThe URPF whitelist ACL name. The ACL must already exist at the time of application.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.8 |
hpicfUrpfStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.131.2 |
hpicfUrpfStatsTableThe table containing statistics information for packets that are dropped by URPF processing. SEQUENCE OF HpicfUrpfStatsEntry .1.3.6.1.4.1.11.2.14.11.5.1.131.2.1 |
hpicfUrpfStatsEntryEach table entry counts packets that are dropped by URPF processing on a particular interface and IP address family. HpicfUrpfStatsEntry .1.3.6.1.4.1.11.2.14.11.5.1.131.2.1.1 |
hpicfUrpfStatsBlockedPacketsThe number of packets blocked by URPF on this interface and address family.ro Counter64 .1.3.6.1.4.1.11.2.14.11.5.1.131.2.1.1.1 |
hpicfUrpfStatsBlockedOctetsThe number of octets blocked by URPF on this interface and address family.ro Counter64 .1.3.6.1.4.1.11.2.14.11.5.1.131.2.1.1.2 |
hpicfUrpfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.131.3 |
hpicfUrpfMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.131.3.1 |
hpicfUrpfScalarGroupA collection of scalar objects providing global configuration information for URPF. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.131.3.1.1 |
hpicfUrpfConfigTableGroupA collection of objects providing configuration information for URPF. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.131.3.1.2 |
hpicfUrpfStatsTableGroupA collection of objects providing statistics for URPF. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.131.3.1.3 |
hpicfUrpfMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.5.1.131.3.2 |
hpicfUrpfMIBComplianceThe compliance statement for HP switches implementing the HPICF-URPF MIB. Unknown .1.3.6.1.4.1.11.2.14.11.5.1.131.3.2.1 |