MIB Catalog

The Mqe MIB module is defined to manage the configuration for FCC, RET, QoE.

The MIB module for management of PIM routers. Huawei Technologies co.,Ltd . Supplementary information may be available at: http://w

This module include the information about MSTP protocol in the bridge. The information can be read and some of them can be set.

V01_01 һƶ mta MIB:HUAWEI-MTA-MIB.mib V1.0 汾ɹMIB׼ίԱỷ MTA MIBС鸺ƶרУ tangrong 17270/huawei, liguanrong 26321/huawei, liaoshunquan 24705/huawei, wangxinran 19281/huawei, liuguoping 17

The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to indicate their interest in receiving mu

MIB module

MIB module

This MIB file defines the MIB objects of the neighbor automatic communication (NAC) protocol. This MIB file contains two tables and three trap nodes. The NAC modul

The MIB module for nap between host and netmanager.

V1.00 The NAT-EUDM mib is for Eudemon product.

The MIB contains objects of S9300 NAT features , referencing the RFC4004.

V1.00 The NAT mib is for all datacomm product..

Please provide the descritpion.

This file is used for NDB alarm.

This MIB contains objects to manage the NDEC device.

This defines the MIB for the Netconf Agent

The private mib file includes the general extent information of the device.hwDatacomm(25).htNetStream(110)

The MIB is used for defining HUAWEI NGADSL LINE MIB objects, which expand from RFC4706 ADSL2-LINE MIB.

This MIB provides mechanisms to monitor a NTP server.

This MIB is to provide TRAP support for NTP. hwNtpStateChangeTrap & hwNtpSysPeerChangeTrap are added to notify the NTP state change & system peer change information

The private mib file includes the general extent information of the device.hwDatacomm(25).hwNtpV3(234)

The MIB module for nvo3 management.

This MIB module provides certain configuration functions for the CPU overload control feature. The functions include the configuration of the mapping relation between the OLC queue a

This MIB contains private managed object and notification trap definitions for Openflow.

The HUAWEI-OSPFV2-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in the sy

The MIB module for OSPF version 3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC draft-ietf-ospf

V4.11 delete MIB nodes .

This mib is supplementary for RMON-MIB(rfc2819). It includes only one table. The mib defines two new objects. One is to set the alarm object by expression,

V1.00 The HUAWEI-SLOG-EUDM-MIB contains objects to manage the security log for firewall product.

MIB of Port Group Isolation module The HUAWEI-PGI-MIB is defined to configure and display the status of port group.

The Mib module for management of IP Multicast, including multicast routing, data forwarding, and data reception. Huawei Technologies co.,Ltd . Supplementary information may

The MIB module for management of PIM routers. Huawei Technologies co.,Ltd . Supplementary information may be available at: http://www.huawei.com

The HUAWEI-POE-MIB contains objects to manage POE.

The private mib file includes the general extent information of the device.hwDatacomm(157).hwPortMIB

The MIB contains objects of module PORTAL.

The PortBlock MIB module is defined to indicate port block function of Huawei Technologies co., Ltd.

The POS MIB module is used to manage POS-Access.

This MIB is used for defining Power Monitor management MIB objects.

This MIB is mainly used to configure PPP , PPP MRU negotiation, MP binding with Mp-Group, and PAP/Chap authentication .

MIB module

This mib is used for defining the IPMB Aiu Proctect MIB objects of the protection group and smart link monitor group.

The HUAWEI-PTP-MIB contains objects to manage PTP.

Pseudo Wire Emulation Edge-to-Edge (PWE3) is an end-to-end L2 service bearing technology, that belongs to L2 VPN in the P2P mode. The system implements the PWE3 architecture through

This MIB Module provides Textual Conventions and OBJECT-IDENTITY Objects to be used in networks implementing PW services.

The HUAWEI-PWE3-MIB contains objects to manage PWE3.

Initial version 2008/12/11,L2VPN QOS OBJECT GROUP.

The QinQ MIB module is defined to manage the configuration under system or interface view.

The mib is used for configuring QoS such as queue scheduling rate limiting, rate mirroring and so on.

This MIB module defines MIB objects which provides R2 attribute management.

The MIB module for RBRP feature. RPR Bridge Redundancy Protocol (RBRP) is the protocol for detecting and initializing the intersection ring

MIB module

The HUAWEI-RIPv2-EXT-MIB.mib contains objects to configure RIP module, including query RIP process, RIP VPN-instance configuration and status. This MIB module objects indicate hwRip2

This mib file is used for Manage the static route table configuration.

MIB module

The HUAWEI-RPR-TRAP-MIB contains objects to Monitor the RPR TRAPs. ********************************* RPR TRAP ****

The RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When

The mib is used for defining the RSTP MIB object. RSTP is used to check the ring network on the user side to prevent the services from being affected.

The MIB module to describe the RSVP Protocol

The HUAWEI-SDL-MIB demonstrates how to maintain SDL ports

V1.00 The HUAWEI-STCSTAT-EUDM-MIB contains objects to manage the security statistics information for firewall product.

V1.00 The HUAWEI-SECSTAT-IP-MONITOR-MIB contains objects to monitor the statistics information for the hosts.

V1.00 The HUAWEI-SECSTAT-MIB contains objects to manage the security statistics for router and firewall product.

V1.00 The AAA mib is for Eudemon and USG product series.

MIB module

MIB module

V1.00 The GlobalIPCar mib is for Eudemon and USG product series. The GlobalIPCar feature is to limit traffic rate for global IP

V1.00 The GTP mib is for Eudemon and USG product series.

V1.00 The HRP mib is for Eudemon and USG product series.

V1.00 The HUAWEI-SECURITY-IPLINK-MIB contains objects to manage the firewall IPLINK module.

V1.00 The IPSec mib is for Eudemon and USG product series.

The private mib file includes the general extent information of the device.hwDatacomm(165).hwSecurityMIB.

MIB module

V1.06 The PKI mib is for Eudemon and USG product series.

V1.20 The HUAWEI-SECSTAT-MIB contains objects to manage the security statistics for firewall product.

V1.00 The Trunk mib is for Eudemon and USG product series.

V1.00 The VrfCar mib is for Eudemon and USG product series. The vrfCar feature is to limit traffic rate for virtual firewall

The private mib file includes the general extent information of the device.hwDatacomm(165).hwSepMIB.

MIB module

The HUAWEI SHDSL MIB,extend based on HDSL2-SHDSL-LINE-MIB-rfc4319.mib.

The HUAWEI-SIP-MIB contains objects to Manage the SIP client configuration.

Site Monitor MIB defines MIB objects which provides load and backup management, patch management NMS interfaces. The current version is V1.01

The MIB describes Server Load Balance

V1.00 The HUAWEI-SLOG-EUDM-MIB contains objects to manage the security log for firewall product.

V1.00 The SMAP mib is for all datacomm product.

This module includes the information about smart link. The information can be read and some of them can be set.

Some attribute of SNMP extended content.

This MIB object is used to describe the interfaces of sending the host notifications (including the alarm and event), and configurations of the log, syslog and trap

This mib is used to set and query the community name of the SNMP and the information about the trap source interface.

This mib which contains objects manages the SSH server and SSH client configuration.

Some attribute of vnfc content.

MIB module

Description.

Description.

Description.

Description.

THIS IS THE LAYER 2 MAC-ADDRESS MANAGEMENT MIB.

The private mib file includes the alarm information of fowarding engine resouce overload.

This MIB object provides functions of active/standby switchover, data saving and duplication, and query of data synchronization status between the active and standb

HUAWEI-SYS-CLOCK-MIB is used to configure and query time information, such as the system time, time zone, and daylight saving time. Root object: iso(1).org(3).dod(

The HUAWEI-SYS-MAN-MIB contains objects to manage the system. The module defines the information about system, such as system time, the current configuration file and system

The MIB contains objects of system log.

V1.00 The HUAWEI-SZONE-MIB contains objects to manage the security zone for firewall product.

MIB module

The Custom damping MIB module is defined to manage the configuration under system or interface view.

The MIB module describes active system tasks, including the status and the general information of a task.

Huawei text conventions and common defination.

The HUAWEI-TCP-MIB provides information about TCP. Now only trap for MD5 authentication failures is provided, which include local address, local port, remote address

The HUAWEI-TDM-PSN-MIB contains objects to manage TDM.

The HUAWEI-TFTPC-MIB which contains objects manages the TFTP client configuration.

huawei time Localization mib.

The TransparentBridge MIB module is defined to manage TransparentBridge function of Huawei Technologies co.,Ltd.

The HUAWEI PRIVATE MIB contains objects belonging to processes of the TRILL protocol existing on the system. It defines the model used to represent data that exists elsewhere in the system and o

The mib is used for configuring time range. When configuring the ACL rule, if you need to specify the time for the ACL rule to take effect, you need to run this command

MIB module

V2.05 Update hwHybridDynBwPunish and hwHybridDynBwResume, modify their description.

This MIB contains private managed object definitions for the binding information.

HUAWEI TWAMP funcion.

This MIB contains private managed object definitions for Unified Man agement Framework.

constitute according to demand of MD5500 product environment monitoring

Please provide the descritpion.