H3C-EOC-COMMON-MIB
The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification.
Main OID:
h3cEOCCommon.1.3.6.1.4.1.2011.10.2.83
133
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
133 total| Object Name |
|---|
h3cEOCCommonThe objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.83 |
h3cEOCCommonSysMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.1 |
h3cEOCCommonSysScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.1.1 |
h3cEOCCommonSysVersionEoc version. If the object length is zero, it means the version is unknown. The length is up to 1024.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.83.1.1.1 |
h3cEOCCommonUpLinkMacAddressEOC CLT's uplink device's mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.1.1.2 |
h3cEOCCommonCltMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.2 |
h3cEOCCommonCltManTableThis table defines the primary parameters of the CLT configuration. SEQUENCE OF H3cEOCCommonCltManEntry .1.3.6.1.4.1.2011.10.2.83.2.1 |
h3cEOCCommonCltManEntryThe entry of the table h3cEOCCommonCltManTable. H3cEOCCommonCltManEntry .1.3.6.1.4.1.2011.10.2.83.2.1.1 |
h3cEOCCommonCltAutoAuthorizeThis value determines whether software performs self-authorization for each Cable Network Unit(CNU) registering to the network. Setting it to false means for every CNU registering, software requires external authorization, and until it's done the CNU is not authenticated. True value means software authorizes each CNU registering to the network automatically.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.2.1.1.1 |
h3cEOCCommonCltMaxAllowToAccessThis value determines how many CNU can be bound in this CLT. If the number of CNU is more than this value , then the rest of CNU should not be allow to access.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.2.1.1.2 |
h3cEOCComCnuMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.3 |
h3cEOCComCnuScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.3.1 |
h3cEOCComCnuMaxDownBWMinValThe lower limit of total-bandwidth which is confined to h3cEOCComCnuMaxDownBW.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.1 |
h3cEOCComCnuMaxDownBWMaxValThe upper limit of total-bandwidth which is confined to h3cEOCComCnuMaxDownBW.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.2 |
h3cEOCComCnuSlaHighPriBWMinValThe lower limit of high priority bandwidth which is confined to h3cEOCComCnuSlaHighPriBW.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.3 |
h3cEOCComCnuSlaHighPriBWMaxValThe upper limit of high priority bandwidth which is confined to h3cEOCComCnuSlaHighPriBW.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.4 |
h3cEOCComCnuMaxUpBWMinValThe lower limit of total-bandwidth which is confined to h3cEOCComCnuMaxUpBW.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.5 |
h3cEOCComCnuMaxUpBWMaxValThe upper limit of total-bandwidth which is confined to h3cEOCComCnuMaxUpBW.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.6 |
h3cEOCComCnuAttenThrAThe value of cnu's average attenuation good level thresholds.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.7 |
h3cEOCComCnuAttenThrBThe value of cnu's average attenuation normal level thresholds.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.8 |
h3cEOCComCnuRateDropThrThe value of cnu's Tx/Rx rate drop thresholds.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.3.1.9 |
h3cEOCComCnuSysManTableThis table implements the management of CNUs(Coax Network Unit). SEQUENCE OF H3cEOCComCnuSysManEntry .1.3.6.1.4.1.2011.10.2.83.3.2 |
h3cEOCComCnuSysManEntryThe entry of the table h3cEOCComCnuSysManTable. H3cEOCComCnuSysManEntry .1.3.6.1.4.1.2011.10.2.83.3.2.1 |
h3cEOCComCnuCableIfindexThe index of cable port which uniquely identifies the cable port of one device.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.2.1.1 |
h3cEOCComCnuDeviceTypeThe type of the EOC CNU(Coax Network Unit).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.3.2.1.2 |
h3cEOCComCnuDeviceAliasEOC CNU's alias which display as the device's name, it's recommended to set it uniquely and understandably.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.3.2.1.3 |
h3cEOCComCnuDescrUser's description, including user's address, name, telephone number and so on.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.3.2.1.4 |
h3cEOCComCnuUpTimeThe time since the CNU last registered to the network.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.10.2.83.3.2.1.5 |
h3cEOCComCnuVLANTypeport vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.3.2.1.6 |
h3cEOCComCnuPvidThe PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on cable interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.3.2.1.7 |
h3cEOCComCnuVlanTagVLAN is set tagged or untagged on cable interface.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.3.2.1.8 |
h3cEOCComCnuResetThis variable is used to reset the CNU device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the CNU device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.3.2.1.9 |
h3cEOCComCnuDeregisterderegister CNU.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.3.2.1.10 |
h3cEOCComCnuSaveSave the UNI and CNU related configurations to the CNU.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.3.2.1.11 |
h3cEOCComCnuAccessControl whether the user can access to the network.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.3.2.1.12 |
h3cEOCComCnuMacTableThis table implements the management of CNUs. SEQUENCE OF H3cEOCComCnuMacEntry .1.3.6.1.4.1.2011.10.2.83.3.3 |
h3cEOCComCnuMacEntryThe entry of the table h3cEOCComCnuMacTable. H3cEOCComCnuMacEntry .1.3.6.1.4.1.2011.10.2.83.3.3.1 |
h3cEOCComCnuMacAddressEOC CNU's MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.3.3.1.1 |
h3cEOCComCnuRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.3.3.1.2 |
h3cEOCComCnuInfoTablePrimary status of the specified CNU. There will be one row in this table for each information in the system. SEQUENCE OF H3cEOCComCnuInfoEntry .1.3.6.1.4.1.2011.10.2.83.3.4 |
h3cEOCComCnuInfoEntryThe entry of the h3cEOCComCnuInfoTable. H3cEOCComCnuInfoEntry .1.3.6.1.4.1.2011.10.2.83.3.4.1 |
h3cEOCComCnuHardwareVersionEOC CNU's hardware version. If the object length is zero, it means the version is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.3.4.1.1 |
h3cEOCComCnuPCBVersionEOC CNU's PCB version.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.83.3.4.1.2 |
h3cEOCComCnuLinkStateThe cable port's link state. The physicaldown(1) state indicates that the CNU is not powered on. The linkdown(2) state indicates that the CNU is powered on, but registers fail. The linkup(3) state indicates that the CNU is powered on, and registers successful.ro Enumeration .1.3.6.1.4.1.2011.10.2.83.3.4.1.3 |
h3cEOCComCnuAttenuationThe cnu's average attenuation.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.4.1.4 |
h3cEOCComCnuSoftwareVersionEOC CNU's software version. If the object length is zero, it means the version is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.3.4.1.5 |
h3cEOCComCnuTxRateThe cnu's capability of tx speed in unit of 1Mbps.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.4.1.6 |
h3cEOCComCnuRxRateThe cnu's capability of rx speed in unit of 1Mbps.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.4.1.7 |
h3cEOCComCnuTxRateDropThe cnu's capability droping of tx speed from it's history max value in unit of %.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.4.1.8 |
h3cEOCComCnuRxRateDropThe cnu's capability droping of rx speed from it's history max value in unit of %.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.3.4.1.9 |
h3cEOCComCnuBandWidthTableSet bandwidth parameters. SEQUENCE OF H3cEOCComCnuBandWidthEntry .1.3.6.1.4.1.2011.10.2.83.3.5 |
h3cEOCComCnuBandWidthEntryThe entry of table h3cEOCComCnuBandWidthTable. It is a pre-configuration. H3cEOCComCnuBandWidthEntry .1.3.6.1.4.1.2011.10.2.83.3.5.1 |
h3cEOCComCnuMaxDownBWMaximum bandwidth allowed for the CNU, measured in Kbit/s.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.3.5.1.1 |
h3cEOCComCnuSlaHighPriBWHigh priority bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cEOCComCnuMaxUpBW. The high priority bandwidth should not be larger than the maximum bandwidth.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.3.5.1.2 |
h3cEOCComCnuMaxUpBWTotal bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cEOCComCnuSlaHighPriBW. The total bandwidth should be larger than the high priority bandwidth.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.3.5.1.3 |
h3cEOCComUniMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.4 |
h3cEOCComUniManTableThis table defines several user network interface(UNI) system parameters. SEQUENCE OF H3cEOCComUniManEntry .1.3.6.1.4.1.2011.10.2.83.4.1 |
h3cEOCComUniManEntryThe entry of h3cEOCComUniManTable. H3cEOCComUniManEntry .1.3.6.1.4.1.2011.10.2.83.4.1.1 |
h3cEOCUniIndexThe index value which uniquely identifies the FE(Fast Ethernet) interface of the CNU. Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.1.1.1 |
h3cEOCComUniDescrA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.4.1.1.2 |
h3cEOCComUniStatusThe desired state of the user network interface. When a managed system initializes, all user network interfaces start with down state. The testing state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, h3cEOCComUniStatus is then changed to either the up or testing states (or remains in the down state).rw Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.3 |
h3cEOCComUniSpeedUser network interface speed.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.4 |
h3cEOCComUniDuplexUser network interface mode.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.5 |
h3cEOCComUniCurrentSpeedAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.ro Gauge32 .1.3.6.1.4.1.2011.10.2.83.4.1.1.6 |
h3cEOCComUniCurrentDuplexThe current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.ro Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.7 |
h3cEOCComUniMdiType of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).rw Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.8 |
h3cEOCComUniFlowControlFlow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.4.1.1.9 |
h3cEOCComUniCountResetReset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.10 |
h3cEOCComUniAliasThis object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first instantiation of an interface, the value of h3cEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of h3cEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the h3cEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and h3cEOCUniIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of h3cEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.4.1.1.11 |
h3cEOCComUniTypeThe type of interface. Additional values for h3cEOCComUniType are assigned by the Internet Assigned Numbers Authority(IANA), through updating the syntax of the IANAifType textual convention.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.2011.10.2.83.4.1.1.12 |
h3cEOCComUniVLANTypeport vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.13 |
h3cEOCComUniPvidThe PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.4.1.1.14 |
h3cEOCComUniVlanTagVLAN is set tagged or untagged.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.15 |
h3cEOCComUniPriorityThe default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.rw Integer32 .1.3.6.1.4.1.2011.10.2.83.4.1.1.16 |
h3cEOCComUniUpLineRateThe max speed upload in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.1.1.17 |
h3cEOCComUniDownLineRateThe max speed download in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the download speed is only restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.1.1.18 |
h3cEOCComUniAdminStatusControl if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard.rw Enumeration .1.3.6.1.4.1.2011.10.2.83.4.1.1.19 |
h3cEOCComUniCountTableA list of interface counter about frames entries. SEQUENCE OF H3cEOCComUniCountEntry .1.3.6.1.4.1.2011.10.2.83.4.2 |
h3cEOCComUniCountEntryAn entry containing management information applicable to a particular interface. H3cEOCComUniCountEntry .1.3.6.1.4.1.2011.10.2.83.4.2.1 |
h3cEOCUniInPktsThe total number of packets (including bad packets, broadcast packets, and multicast packets) received.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.1 |
h3cEOCUniInUPktsThe total number of good packets received that are directed to the unicast address. Note that this does not include multicast and broadcast packets.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.2 |
h3cEOCUniInBPktsThe total number of good packets received that are directed to the broadcast address. Note that this does not include multicast packets.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.3 |
h3cEOCUniInMPktsThe total number of good packets received that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.4 |
h3cEOCUniInPausePktsA count of MAC Control packets received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.5 |
h3cEOCUniInTotalErrorsTotal count of the error packets received on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.6 |
h3cEOCUniInCRCErrsThe total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.7 |
h3cEOCUniInUndersizePktsThe total number of packets received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.8 |
h3cEOCUniInOversizePktsThe total number of packets received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.9 |
h3cEOCUniInErrorbyOtherThe total number of other error packets received on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.10 |
h3cEOCUniInOctetsThe total number of octets received on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.11 |
h3cEOCUniOutPktsThe total number of packets (including bad packets, broadcast packets, and multicast packets) sent.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.12 |
h3cEOCUniOutUPktsThe total number of good packets sent that are directed to the unicast address. Note that this does not include multicast and broadcast packets.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.13 |
h3cEOCUniOutBPktsThe total number of good packets sent that are directed to the broadcast address. Note that this does not include multicast packets.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.14 |
h3cEOCUniOutMPktsThe total number of good packets sent that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.15 |
h3cEOCUniOutPausePktsThe total number of MAC control packets sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.16 |
h3cEOCUniOutTotalErrorsThe total number of error packets sent on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.17 |
h3cEOCUniOutCollisionsThe best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.18 |
h3cEOCUniOutDelayExceedDsdsThe number of packets discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.19 |
h3cEOCUniOutErrorbyOtherThe total number of other error packets sent on this interface. Other error packets means the error packets out of collision packets and excessive delayed packets.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.20 |
h3cEOCUniOutDroppedFramesThe total number of frames dropped because of buffer failure.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.21 |
h3cEOCUniOutOctetsThe total number of octets transmitted out of the interface.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.83.4.2.1.22 |
h3cEOCCommonTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.5 |
h3cEOCTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.5.0 |
h3cEOCCnuRegExcessTrapA h3cEOCCnuRegExcessTrap notification is sent when the number of registered CNUs exceeds the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.1 |
h3cEOCCnuRegExcessRecoverTrapA h3cEOCCnuRegExcessRecoverTrap notification is sent when h3cEOCCnuRegExcessTrap is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.2 |
h3cEOCCnuRegSuccTrapA h3cEOCCnuRegSuccTrap notification is sent when a CNU registers successful. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.3 |
h3cEOCCnuOffLineTrapA h3cEOCCnuOffLineTrap notification is sent when a CNU offline. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.4 |
h3cEOCCnuLinkupTrapA h3cEOCCnuLinkupTrap notification is sent when a CNU linkup. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.5 |
h3cEOCOamDisconnectTrapA h3cEOCOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.6 |
h3cEOCOamDisconnectRecoverTrapA h3cEOCOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.7 |
h3cEOCBandwidthNotEnoughTrapBandwidth is not enough, cnu can not bind now. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.8 |
h3cEOCCnuAttenuationTrapA h3cHPEOCCnuAttenuationTrap notification is sent when a CNU's attenuation is changing. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.9 |
h3cEOCCnuRegFailTrapA h3cEOCCnuRegFailTrap notification is sent when a CNU registers fail. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.10 |
h3cEOCCLTCablePortErrorTrapA h3cEOCCLTCablePortErrorTrap notification is sent when the hardware of cable port occurs error or CLT's vlan is configged error. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.11 |
h3cEOCCLTCablePortErrReTrapA h3cEOCCLTCablePortErrReTrap notification is sent when cable port error and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.12 |
h3cEOCCnuTxRateDropTrapA h3cEOCCnuTxRateDropTrap notification is sent when cable port rate of TX capability drop exceeded threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.13 |
h3cEOCCnuTxRateDropRecoverTrapA h3cEOCCnuTxRateDropRecoverTrap notification is sent when cable port rate of TX capability recover from the recent rate-drop trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.14 |
h3cEOCCnuRxRateDropTrapA h3cEOCCnuRxRateDropTrap notification is sent when cable port rate of RX capability drop exceeded threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.15 |
h3cEOCCnuRxRateDropRecoverTrapA h3cEOCCnuRxRateDropRecoverTrap notification is sent when cable port rate of RX capability recover from the recent rate-drop trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.16 |
h3cEOCCnuFWDownLoadErrTrapA h3cEOCCnuFWDownLoadErrTrap notification is sent when CLT can't download CNU firmware from the server successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.17 |
h3cEOCCnuFWDownLoadErrReTrapA h3cEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover from the download CNU firmware error. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.18 |
h3cEOCCnuDeviceTypeErrTrapA h3cEOCCnuDeviceTypeErrTrap notification is sent when the online CNU doesn't match the type which user defined earlier. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.19 |
h3cEOCCnuDeviceTypeErrReTrapA h3cEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU doesn't match the type which user defined earlier and then recover. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.20 |
h3cEOCCnuAutoUpdateErrTrapA h3cEOCCnuAutoUpdateErrTrap notification is sent when the online CNU doesn't auto update successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.21 |
h3cEOCCnuAutoUpdateSuccTrapA h3cEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU auto update successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.83.5.0.22 |
h3cEOCComOnLineCnuMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.83.6 |
h3cEOCComCnuTypeTableThis table defines the description of cnu typ. SEQUENCE OF H3cEOCComCnuTypeEntry .1.3.6.1.4.1.2011.10.2.83.6.1 |
h3cEOCComCnuTypeEntryThe entry of the table h3cEOCComCnuTypeTable. H3cEOCComCnuTypeEntry .1.3.6.1.4.1.2011.10.2.83.6.1.1 |
h3cEOCComCnuTypeIdxA unique value for each cnu types. Its value ranges between 1 and the value of cny typess. Unsigned32 .1.3.6.1.4.1.2011.10.2.83.6.1.1.1 |
h3cEOCComCnuDescriptonThe description for unique cnu types.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.83.6.1.1.2 |
h3cEOCComCnuNumTableThis table defines the number of cnu registered in variable types of the CLT . SEQUENCE OF H3cEOCComCnuNumEntry .1.3.6.1.4.1.2011.10.2.83.6.2 |
h3cEOCComCnuNumEntryThe entry of the table h3cEOCComCnuNumTable. H3cEOCComCnuNumEntry .1.3.6.1.4.1.2011.10.2.83.6.2.1 |
h3cEOCComCnuNumberThe number of special type of cnu that has been registerd in clt.ro Integer32 .1.3.6.1.4.1.2011.10.2.83.6.2.1.1 |