H3C-EVI-MIB
This MIB contains the objects for managing Ethernet Virtual Interconnect(EVI).
Main OID:
h3cEvi.1.3.6.1.4.1.2011.10.2.132
97
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
97 total| Object Name |
|---|
h3cEviThis MIB contains the objects for managing Ethernet Virtual
Interconnect(EVI). MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.132 |
h3cEviNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.0 |
h3cEviNewDedNotifies that a new DED has been elected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.132.0.1 |
h3cEviSiteEDTopoChangeNotifies that the EVI network topology has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.132.0.2 |
h3cEviEDLinkDisconnectNotifies that all the EVI links on a tunnel are down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.132.0.3 |
h3cEviObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.1 |
h3cEviBase OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.1.1 |
h3cEviDesignatedVlanThe designated VLAN is used for edge devices on
a multihomed site to exchange EVI IS-IS hello
packets for DED election and extended-VLAN
assignment.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.10.2.132.1.1.1 |
h3cEviSiteIDSite ID. The edge devices in the same site must have
the same site ID.rw Integer32 .1.3.6.1.4.1.2011.10.2.132.1.1.2 |
h3cEviIf OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.1.2 |
h3cEviIfExtendVlanTableA table that contains extended VLAN entries. A site
extends extended VLANs to remote sites over an EVI tunnel. SEQUENCE OF H3cEviIfExtendVlanEntry .1.3.6.1.4.1.2011.10.2.132.1.2.1 |
h3cEviIfExtendVlanEntryDetailed information about each extended VLAN. H3cEviIfExtendVlanEntry .1.3.6.1.4.1.2011.10.2.132.1.2.1.1 |
h3cEviIfExtendVlanIndexEach VLAN index specifies a VLAN ID in the range of
1 to 4094. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.10.2.132.1.2.1.1.1 |
h3cEviIfExtendVlanLAVLocal Active VLANs (LAVs), which are active VLANs on the EVI tunnel
interface. The interface can extend only active VLANs to
remote sites.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.2.1.1.2 |
h3cEviIfExtendVlanRowStatusEntry status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.2.1.1.3 |
h3cEviIfVlanMappingTableVLAN mapping table on the interface. SEQUENCE OF H3cEviIfVlanMappingEntry .1.3.6.1.4.1.2011.10.2.132.1.2.2 |
h3cEviIfVlanMappingEntryDetailed information about each VLAN mapping. H3cEviIfVlanMappingEntry .1.3.6.1.4.1.2011.10.2.132.1.2.2.1 |
h3cEviIfVlanMappingSiteIdSite ID of the interface on which the VLAN mapping is
configured. If '0' is specified, the operation applies
to all sites. Integer32 .1.3.6.1.4.1.2011.10.2.132.1.2.2.1.1 |
h3cEviIfVlanMappingSrcLocal VLAN ID in the mapping. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.10.2.132.1.2.2.1.2 |
h3cEviIfVlanMappingDstRemote VLAN ID in the mapping. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.10.2.132.1.2.2.1.3 |
h3cEviIfVlanMappingRowStatusEntry status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.2.2.1.4 |
h3cEviIfAttributeTableA table that contains EVI tunnel attribute entries. SEQUENCE OF H3cEviIfAttributeEntry .1.3.6.1.4.1.2011.10.2.132.1.2.3 |
h3cEviIfAttributeEntryDetailed information about the attributes of each EVI tunnel. H3cEviIfAttributeEntry .1.3.6.1.4.1.2011.10.2.132.1.2.3.1 |
h3cEviIfFloodingModeState of the EVI flooding function. The function is enabled
if the value is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.2.3.1.1 |
h3cEviIfARPSuppressionState of the ARP flooding suppression function. The
function is enabled if the value is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.2.3.1.2 |
h3cEviIfFloodingMacTableA table that contains MAC addresses configured
for selective flooding. SEQUENCE OF H3cEviIfFloodingMacEntry .1.3.6.1.4.1.2011.10.2.132.1.2.4 |
h3cEviIfFloodingMacEntryDetailed information about each MAC address
used for EVI selective flooding. H3cEviIfFloodingMacEntry .1.3.6.1.4.1.2011.10.2.132.1.2.4.1 |
h3cEviIfFloodingMacAddressMAC address used for EVI selective flooding. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.2.4.1.1 |
h3cEviIfFloodMacVlanIndexThe VLAN that contains the MAC address. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.10.2.132.1.2.4.1.2 |
h3cEviIfFloodingMacRowStatusState of the MAC address entry. You can use this
object to create or delete entries. Deleting entries
does not delete this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.2.4.1.3 |
h3cEviMac OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.1.3 |
h3cEviMacCountTableEVI MAC statistics table. The table contains MAC entry
counts sorted by MAC address types, including local MACs, local
MAC conflicts, remote MACs, and remote MAC conflicts. SEQUENCE OF H3cEviMacCountEntry .1.3.6.1.4.1.2011.10.2.132.1.3.1 |
h3cEviMacCountEntryEVI MAC entry counts. H3cEviMacCountEntry .1.3.6.1.4.1.2011.10.2.132.1.3.1.1 |
h3cEviMacLocalMacsNumber of local MACs.ro Counter32 .1.3.6.1.4.1.2011.10.2.132.1.3.1.1.1 |
h3cEviMacLocalConflictsNumber of local MACs that conflict with remote
MACs.ro Counter32 .1.3.6.1.4.1.2011.10.2.132.1.3.1.1.2 |
h3cEviMacRemoteMacsNumber of remote MACs received from remote edge devices.ro Counter32 .1.3.6.1.4.1.2011.10.2.132.1.3.1.1.3 |
h3cEviMacRemoteConflictsNumber of remote MACs that conflict with local MACs.ro Counter32 .1.3.6.1.4.1.2011.10.2.132.1.3.1.1.4 |
h3cEviMacLocalTableMAC address table that only contains MAC addresses at
the site. SEQUENCE OF H3cEviMacLocalEntry .1.3.6.1.4.1.2011.10.2.132.1.3.2 |
h3cEviMacLocalEntryDetailed informaiton about each local MAC entry. H3cEviMacLocalEntry .1.3.6.1.4.1.2011.10.2.132.1.3.2.1 |
h3cEviMacLocalVlanVLANs that contain the local MACs. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.1 |
h3cEviMacLocalMacAddrLocal MAC addresses. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.2 |
h3cEviMacLocalMacTypeMAC address types, including: dynamic MACs, static MACs,
and flood MACs (MACs configured for selective flooding).ro H3cEviMacType .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.3 |
h3cEviMacLocalConflictWhether the MAC conflicts with any remote MAC.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.4 |
h3cEviMacLocalFilteredWhether the MAC is filtered.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.3.2.1.5 |
h3cEviMacRemoteTableA table contains MAC addresses received from remote edge devices. SEQUENCE OF H3cEviMacRemoteEntry .1.3.6.1.4.1.2011.10.2.132.1.3.3 |
h3cEviMacRemoteEntryDetailed information about each remote MAC. H3cEviMacRemoteEntry .1.3.6.1.4.1.2011.10.2.132.1.3.3.1 |
h3cEviMacRemoteVlanVLANs that contain remote MAC addresses. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.10.2.132.1.3.3.1.1 |
h3cEviMacRemoteMacAddrRemote MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.3.3.1.2 |
h3cEviMacRemoteMacEffectWhether the MAC can be used for forwarding traffic.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.3.3.1.3 |
h3cEviMacRemoteConflictThe remote MAC conflicts with a local MAC.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.3.3.1.4 |
h3cEviProcess OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.1.4 |
h3cEviProcessPolicyTableA table that contains routing policy information for each
EVI IS-IS process. SEQUENCE OF H3cEviProcessPolicyEntry .1.3.6.1.4.1.2011.10.2.132.1.4.1 |
h3cEviProcessPolicyEntryDetailed information about the routing policy for each
EVI IS-IS process. H3cEviProcessPolicyEntry .1.3.6.1.4.1.2011.10.2.132.1.4.1.1 |
h3cEviProcessIdEVI IS-IS process ID.ro Unsigned32 (0 .. 1023) .1.3.6.1.4.1.2011.10.2.132.1.4.1.1.1 |
h3cEviProcessPolicyRouting policy for the EVI IS-IS process.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.4.1.1.2 |
h3cEviProcessGrTableA table that contains graceful restart (GR) information. SEQUENCE OF H3cEviProcessGrEntry .1.3.6.1.4.1.2011.10.2.132.1.4.2 |
h3cEviProcessGrEntryDetailed GR information for each EVI IS-IS process. H3cEviProcessGrEntry .1.3.6.1.4.1.2011.10.2.132.1.4.2.1 |
h3cEviProcessGrEnableWhether the GR function is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.4.2.1.1 |
h3cEviProcessGrIntervalEVI IS-IS GR interval in the range of 30 to 1800, in
seconds.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.132.1.4.2.1.2 |
h3cEviProcessVSysTableA table that contains virtual system entries. Virtual systems are
associated with EVI IS-IS processes. SEQUENCE OF H3cEviProcessVSysEntry .1.3.6.1.4.1.2011.10.2.132.1.4.3 |
h3cEviProcessVSysEntryDetailed information about each vitual system. H3cEviProcessVSysEntry .1.3.6.1.4.1.2011.10.2.132.1.4.3.1 |
h3cEviVirtualSysIdVirtual system ID in hexadecimal notation. The virtual
system ID must be unique in the EVI network. IsisSystemID (ISIS-MIB) .1.3.6.1.4.1.2011.10.2.132.1.4.3.1.1 |
h3cEviVirtualSysRowStatusEntry status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.4.3.1.2 |
h3cEviISIS OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.1.5 |
h3cEviISISNbrSummaryTableEVI neighbor statistics table. SEQUENCE OF H3cEviISISNbrSummaryEntry .1.3.6.1.4.1.2011.10.2.132.1.5.1 |
h3cEviISISNbrSummaryEntryEVI neighbor statistics table entries. The entries
contain the EVI neighbor summary for each EVI IS-IS
process. H3cEviISISNbrSummaryEntry .1.3.6.1.4.1.2011.10.2.132.1.5.1.1 |
h3cEviISISNbrMaxMultiHomesThe maximum number of edge devices that the site
can contain.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.132.1.5.1.1.1 |
h3cEviISISNbrSiteNbrsThe count of neighbors that belong to the same site.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.132.1.5.1.1.2 |
h3cEviISISNbrLinkNbrsThe count of neighbors that are in remote sites.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.132.1.5.1.1.3 |
h3cEviISISNbrTableA table that contains generic information about all
neighbors. SEQUENCE OF H3cEviISISNbrEntry .1.3.6.1.4.1.2011.10.2.132.1.5.2 |
h3cEviISISNbrEntryDetailed information about each neighbor of the edge
device. H3cEviISISNbrEntry .1.3.6.1.4.1.2011.10.2.132.1.5.2.1 |
h3cEviISISNbrSysIdSystem ID of the neighbor.ro IsisSystemID (ISIS-MIB) .1.3.6.1.4.1.2011.10.2.132.1.5.2.1.1 |
h3cEviISISNbrMacAddrMAC address of the neighbor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.5.2.1.2 |
h3cEviISISNbrSiteIdSite ID of the neighbor.ro Integer32 .1.3.6.1.4.1.2011.10.2.132.1.5.2.1.3 |
h3cEviISISNbrTransStatusState of EVI transport-facing links.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.5.2.1.4 |
h3cEviEnable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.1.6 |
h3cEviEnableTableA table that contains all EVI-enabled neighboring ports of the edge device. SEQUENCE OF H3cEviEnableEntry .1.3.6.1.4.1.2011.10.2.132.1.6.1 |
h3cEviEnableEntryDetailed information about each EVI-enabled port in the EVI
network. H3cEviEnableEntry .1.3.6.1.4.1.2011.10.2.132.1.6.1.1 |
h3cEviEnableStatusEnd station service disable (trunk port) bit. When this bit
is set (true), all native frames received on the port and all
native frames that would have been sent on the port are
discarded.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.6.1.1.1 |
h3cEviNbr OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.132.1.7 |
h3cEviNbrBaseTableA table that contains basic information about the EVI
Neighbor Discovery Protocol (ENDP). SEQUENCE OF H3cEviNbrBaseEntry .1.3.6.1.4.1.2011.10.2.132.1.7.1 |
h3cEviNbrBaseEntryDetailed information about ENDP for each EVI tunnel. H3cEviNbrBaseEntry .1.3.6.1.4.1.2011.10.2.132.1.7.1.1 |
h3cEviNbrSelfServerStatusIf the value is set to true, the EVI neighbor
discovery server (ENDS) is enabled. When you
enable ENDS on an EVI tunnel interface, an
EVI neighbor discovery client (ENDC) on the EVI tunnel
interface is also enabled automatically, with the source
address of the EVI tunnel as the server address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.7.1.1.1 |
h3cEviNbrAuthPasswordENDP authentication key. It is a zero-length string when being read.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.132.1.7.1.1.2 |
h3cEviNbrClientRegisterIntervalInterval at which the ENDCs on an EVI tunnel interface
update their registration with their ENDSs.rw Integer32 .1.3.6.1.4.1.2011.10.2.132.1.7.1.1.3 |
h3cEviNbrRemoteServerTableA table that contains basic information about the
remote ENDSs. SEQUENCE OF H3cEviNbrRemoteServerEntry .1.3.6.1.4.1.2011.10.2.132.1.7.2 |
h3cEviNbrRemoteServerEntryDetailed information about each remote ENDS. When you set
the address of a remote ENDS on an EVI tunnel interface,
an ENDC is enabled automatically on the EVI tunnel interface. H3cEviNbrRemoteServerEntry .1.3.6.1.4.1.2011.10.2.132.1.7.2.1 |
h3cEviNbrRemoteServerTypeAddress type of the remote ENDS, including ipv4 and ipv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.132.1.7.2.1.1 |
h3cEviNbrRemoteServerAddress of the remote ENDS. The address type is
specified by the h3cEviNbrRemoteServerType object.
Address length (4 or 16 bytes) must be consistent with
the address type. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.132.1.7.2.1.2 |
h3cEviNbrRemoteServerRowStatusEntry status. This object is used to create or delete
entries. Deleting entries does not delete this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.7.2.1.3 |
h3cEviNbrTableA table that contains basic information about neighbors
discovered with ENDP. SEQUENCE OF H3cEviNbrEntry .1.3.6.1.4.1.2011.10.2.132.1.7.3 |
h3cEviNbrEntryDetailed information about each EVI neighbor. H3cEviNbrEntry .1.3.6.1.4.1.2011.10.2.132.1.7.3.1 |
h3cEviNbrAddressTypeAddress type of the neighbor, including ipv4 and ipv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.1 |
h3cEviNbrAddressAddress of the neighbor. The address type is specified by the
h3cEviNbrAddressType object. Address length (4 or 16 bytes)
must be consistent with the address type. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.2 |
h3cEviNbrSystemIDSystem ID of the neighbor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.3 |
h3cEviNbrExpireTimeExpiration time of the neighbor.ro Integer32 .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.4 |
h3cEviNbrStatusState of the neighbor.ro H3cEviNeighborStatus .1.3.6.1.4.1.2011.10.2.132.1.7.3.1.5 |