HUAWEI-SNMPTrap-MIB
AI MIB Summary
The HUAWEI-SNMPTrap-MIB module configures SNMP community strings and defines the source interface for trap generation on Huawei network devices. It facilitates the management of SNMPv1/v2c security parameters and ensures accurate source identification for asynchronous trap notifications.
This mib is used to set and query the community name of the SNMP and the information about the trap source interface.
Main OID:
hwSNMPTrapCommunity.1.3.6.1.4.1.2011.6.3.14
9
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
9 total| Object Name |
|---|
hwSNMPTrapCommunityThis mib is used to set and query the community name of the SNMP
and the information about the trap source interface. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.3.14 |
hwTrapSwitchOptions:
1. enable(1) -indicates that the system can report trap to the NMS.
2. disable(2) -indicates that the system does not report trap to the NMS.rw Enumeration .1.3.6.1.4.1.2011.6.3.14.1 |
hwTrapSourceTypeThe type of the source interface of sending trap.
Options:
1. auto(1) -auto type. If it is set to auto(1), the information about the trap source interface
previously set in the system is cleared.
2. meth(2) -meth type.
3. vlanif(3)-vlanif type.
If it is set to meth(2) or vlanif(3), you also need to set hwInterfaceNumber,
in order to complete the information of the source interface of sending trap.
If the specified trap source interface does not exist, setting the trap source interface fails.rw Enumeration .1.3.6.1.4.1.2011.6.3.14.2 |
hwInterfaceNumberThe number of the source interface for sending trap.
If hwTrapSourceType is set to meth(2) or vlanif(3),
you also need to set hwInterfaceNumber.rw Integer32 .1.3.6.1.4.1.2011.6.3.14.3 |
hwCommunityInfoTableUsed to configure and query the community name of the SNMP.
If an SNMP manager can provide the correct community name,
the SNMP manager has the permission to access the corresponding community.
The index of this table is hwCommunityName. SEQUENCE OF HwCommunityInfoEntry .1.3.6.1.4.1.2011.6.3.14.4 |
hwCommunityInfoEntryUsed to configure and query the community name of the SNMP.
If an SNMP manager can provide the correct community name,
the SNMP manager has the permission to access the corresponding community.
The index of this entry is hwCommunityName. HwCommunityInfoEntry .1.3.6.1.4.1.2011.6.3.14.4.1 |
hwCommunityNameCommunity authentication name used for SNMP protocol GET or SET operation.
It is the index of the community configuration table. OCTET STRING .1.3.6.1.4.1.2011.6.3.14.4.1.1 |
hwCommunityAccessThe operation authority of the community name.
Options:
1. read(1) -indicates that you can only read the MIB object.
2. write(2) -indicates that you can read and write the MIB object.rw Enumeration .1.3.6.1.4.1.2011.6.3.14.4.1.2 |
hwCommunityRowStatusThe status of this conceptual row.
createAndGo(4) is supplied to create a new instance of a conceptual row.
destroy(6) is supplied to delete the instances associated with an existing conceptual row.
When you query the object, the existing community names are in the active(1) state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.3.14.4.1.3 |