H3C-UNICAST-MIB
AI MIB Summary
The H3C-UNICAST-MIB module enables monitoring of unicast routing table entries, forwarding information base (FIB) statistics, and associated interface traffic counters on H3C network devices. It provides the necessary OID definitions for tracking unicast packet forwarding rates, drop counts, and routing protocol state changes within the device's data plane.
This MIB is a framework MIB for unicast related features.
Main OID:
h3cUnicast.1.3.6.1.4.1.2011.10.2.44
9
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
9 total| Object Name |
|---|
h3cUnicastThis MIB is a framework MIB for unicast related features. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.44 |
h3cURPFTableUnicast Reverse Path Forwarding (URPF) is used to prevent the network attacks caused by source address spoofing. This table is used to configure URPF on specific interfaces. SEQUENCE OF H3cURPFEntry .1.3.6.1.4.1.2011.10.2.44.1 |
h3cURPFEntryThe entry of h3cURPFTable, indexed by vlan interface index. H3cURPFEntry .1.3.6.1.4.1.2011.10.2.44.1.1 |
h3cURPFIfIndexThe ifIndex of vlan interface. Integer32 .1.3.6.1.4.1.2011.10.2.44.1.1.1 |
h3cURPFEnabledThis object is used to enable or disable URPF on certain vlan interfaces.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.44.1.1.2 |
h3cURPFSlotIDThis object specifies to which slot packets are redirected in order to perform URPF check.rw Integer32 .1.3.6.1.4.1.2011.10.2.44.1.1.3 |
h3cURPFTotalReceivedPacketThis object provides total received packets number.ro Counter64 .1.3.6.1.4.1.2011.10.2.44.1.1.4 |
h3cURPFDroppedPacketThis object provides total dropped invalid packets number.ro Counter64 .1.3.6.1.4.1.2011.10.2.44.1.1.5 |
h3cURPFClearStatThis object is used to clear the URPF statistics on certain vlan interfaces. This object is actually a write-only object. When read, it always returns 0. When set to 1, the objects h3cURPFTotalReceivedPacket and h3cURPFDroppedPacket are reset to 0.rw Enumeration .1.3.6.1.4.1.2011.10.2.44.1.1.6 |