H3C-DHCP4-MIB
DHCPv4 MIB
Main OID:
h3cDhcp4.1.3.6.1.4.1.2011.10.2.122
223
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
223 total| Object Name |
|---|
h3cDhcp4DHCPv4 MIB MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.122 |
h3cDhcpServer2ScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.122.1 |
h3cDhcpServer2ConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.122.1.1 |
h3cDhcpServer2EnabledIf the value of this object is 'true', the DHCP service is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.1.1.1 |
h3cDhcpServer2AlwaysBroadcastWhen the value of this object is set to 'true', the DHCP server always uses broadcast to reply the client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.1.1.2 |
h3cDhcpServer2IgnoreBootpWhen the value of this object is set to 'true', the DHCP server ignores BOOTP requests.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.1.1.3 |
h3cDhcpServer2BootpReplyRfc1048When the value of this object is set to 'true', the DHCP server use RFC 1048 format to reply to BOOTP requests.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.1.1.4 |
h3cDhcpServer2Opt82EnabledWhen the value of this object is set to 'true', the DHCP server handles DHCP option 82.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.1.1.5 |
h3cDhcpServer2PingNumberThe number of ping packets sent out.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.122.1.1.6 |
h3cDhcpServer2PingTimeoutThe delay for the reply of a ping packet in milliseconds.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.122.1.1.7 |
h3cDhcpServer2StatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.122.1.2 |
h3cDhcpServer2BadNumThe total number of the bad packets received.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.1 |
h3cDhcpServer2BootpRequestNumThe total number of the BOOTREQUEST packets received.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.2 |
h3cDhcpServer2DiscoverNumThe total number of the DHCPDISCOVER packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.3 |
h3cDhcpServer2RequestNumThe total number of the DHCPREQUEST packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.4 |
h3cDhcpServer2DeclineNumThe total number of the DHCPDECLINE packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.5 |
h3cDhcpServer2ReleaseNumThe total number of the DHCPRELEASE packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.6 |
h3cDhcpServer2InformNumThe total number of the DHCPINFORM packets received from the DHCP clients.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.7 |
h3cDhcpServer2BootpReplyNumThe total number of the BOOTREPLY packets sent by the DHCP server.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.8 |
h3cDhcpServer2OfferNumThe total number of the DHCPOFFER packets sent by the DHCP server.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.9 |
h3cDhcpServer2AckNumThe total number of the DHCPACK packets sent by the DHCP server.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.10 |
h3cDhcpServer2NakNumThe total number of the DHCPNAK packets sent by the DHCP server.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.1.2.11 |
h3cDhcpServer2TotalPoolUsageThe percentage of IP addresses in use of all DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.122.1.2.12 |
h3cDhcpServer2PoolNumberThe total number of DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.122.1.2.13 |
h3cDhcpServer2ConflictNumThe total number of conflict IP in all DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.122.1.2.14 |
h3cDhcpServer2AutoBindNumThe total number of auto binding IP in DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.122.1.2.15 |
h3cDhcpServer2ManualBindNumThe total number of manual binding IP in DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.122.1.2.16 |
h3cDhcpServer2ExpiredBindNumThe total number of expired binding IP in DHCP server pools.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.122.1.2.17 |
h3cDhcpServer2Tables OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.122.2 |
h3cDhcpServer2PoolTableA table containing DHCP server pool configurations. SEQUENCE OF H3cDhcpServer2PoolEntry .1.3.6.1.4.1.2011.10.2.122.2.1 |
h3cDhcpServer2PoolEntryAn entry containing DHCP server pool configurations. H3cDhcpServer2PoolEntry .1.3.6.1.4.1.2011.10.2.122.2.1.1 |
h3cDhcpServer2PoolIndexDHCP server pool index. Unsigned32 .1.3.6.1.4.1.2011.10.2.122.2.1.1.1 |
h3cDhcpServer2PoolNameDHCP server pool name. Once this object is created, the value of this object cannot be modified.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.2 |
h3cDhcpServer2PoolVpnNameName of the VPN instance that the DHCP pool binds to. The value of a zero-length string means the public network. Once this object is created, the value of this object cannot be modified.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.3 |
h3cDhcpServer2PoolNetworkNetwork address of the primary subnet in a DHCP pool. If the value of this object is set to 0.0.0.0, h3cDhcpServer2PoolNetworkMask is set with 0.0.0.0 automatically.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.4 |
h3cDhcpServer2PoolNetworkMaskNetwork mask of the primary subnet in a DHCP pool. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.5 |
h3cDhcpServer2PoolStartAddrStart IP of an address range of the DHCP pool. If the value of this object is set to 0.0.0.0, h3cDhcpServer2PoolEndAddr is set with 0.0.0.0 automatically. Otherwise h3cDhcpServer2PoolEndAddr must be set with an IP address NOT smaller than the value of this object.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.6 |
h3cDhcpServer2PoolEndAddrEnd IP of an address range of the DHCP pool, The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolStartAddr together, and any SET operation alone to this object will be regarded as an invalid operation.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.7 |
h3cDhcpServer2PoolLeaseDayNumber of days of the lease. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolLeaseHour, h3cDhcpServer2PoolLeaseMinute, h3cDhcpServer2PoolLeaseSecond together, and any SET operation alone to any of these objects will be regarded as an invalid operation. These objects cannot be set with 0 simultaneously.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.1.1.8 |
h3cDhcpServer2PoolLeaseHourNumber of hours of the lease.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.1.1.9 |
h3cDhcpServer2PoolLeaseMinuteNumber of minutes of the lease.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.1.1.10 |
h3cDhcpServer2PoolLeaseSecondNumber of seconds of the lease.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.1.1.11 |
h3cDhcpServer2PoolLeaseUnlimitA flag denoting whether the lease time of a DHCP pool is unlimited.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.1.1.12 |
h3cDhcpServer2PoolLeaseTimeThe lease time of a DHCP pool in number of timeticks. The value of this object cannot be set to 0 and must be set to 4294967295 or a multiple of 100. If the object is set with 4294967295, the lease time of a DHCP pool is unlimited.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.10.2.122.2.1.1.13 |
h3cDhcpServer2PoolDomainNameDomain name for DHCP clients. If the object is set with a zero-length string, the configuration of the domain name is removed.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.14 |
h3cDhcpServer2PoolGatewayIPGateway IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.15 |
h3cDhcpServer2PoolDNSIPDNS server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 DNS server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the DNS address is removed.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.16 |
h3cDhcpServer2PoolPrimaryDNSIPThe primary DNS server IP address to be assigned to the client.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.17 |
h3cDhcpServer2PoolSecondDNSIPThe secondary DNS server IP address to be assigned to the client.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.18 |
h3cDhcpServer2PoolNetbiosTypeNetBios node type for DHCP clients.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.2.1.1.19 |
h3cDhcpServer2PoolNbnsIPNetBios server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 NetBios server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the NBNS address is removed.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.20 |
h3cDhcpServer2PoolBootFileNameBoot file name for DHCP clients. If the object is set with a zero-length string, the configuration of the boot file name is removed.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.21 |
h3cDhcpServer2PoolBimsIPBIMS server IP address. If the object is set with 0.0.0.0, h3cDhcpServer2PoolBimsPort is set with 0 and h3cDhcpServer2PoolBimsKeyStr is set with a zero-length string automatically. Otherwise h3cDhcpServer2PoolBimsPort and h3cDhcpServer2PoolBimsKeyStr must be set at the same time while h3cDhcpServer2PoolBimsKeyStr must be set with a non-zero length string.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.22 |
h3cDhcpServer2PoolBimsPortBIMS server port number. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolBimsIP and h3cDhcpServer2PoolBimsKeyStr together, and any SET operation alone to this object will be regarded as an invalid operation.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.122.2.1.1.23 |
h3cDhcpServer2PoolBimsKeyStrBIMS server key string. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolBimsIP and h3cDhcpServer2PoolBimsPort together, and any SET operation alone to this object will be regarded as an invalid operation.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.24 |
h3cDhcpServer2PoolNextServerNext DHCP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the next server address is removed.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.25 |
h3cDhcpServer2PoolTftpDomNameTFTP server domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the TFTP domain name is removed.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.26 |
h3cDhcpServer2PoolTftpIPTFTP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the TFTP server address is removed.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.27 |
h3cDhcpServer2PoolVoiceAsIPVoice backup server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice backup server IP address is removed.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.28 |
h3cDhcpServer2PoolVoiceFailIPVoice failover IP address for DHCP clients. If the object is set with 0.0.0.0, h3cDhcpServer2PoolVoiceFailStr is set with a zero-length string automatically. Otherwise h3cDhcpServer2PoolVoiceFailStr must be set with a non-zero length string at the same time.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.29 |
h3cDhcpServer2PoolVoiceFailStrVoice failover dialer string for DHCP clients. The characters in the string must be '0' ~ '9',or '*'. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolVoiceFailIP together, and any SET operation alone to this object will be regarded as an invalid operation.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.1.1.30 |
h3cDhcpServer2PoolVoiceNCPIPVoice network calling processing IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice network calling processing IP address is removed.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.1.1.31 |
h3cDhcpServer2PoolVoiceVlanIdVoice VLAN ID for DHCP clients. If the value of this object is set to 65535, h3cDhcpServer2PoolVoiceVlanEnbl is set with 'false' automatically. Otherwise h3cDhcpServer2PoolVoiceVlanEnbl must also be set.rw Unsigned32(2..4094 | 65535) .1.3.6.1.4.1.2011.10.2.122.2.1.1.32 |
h3cDhcpServer2PoolVoiceVlanEnblEnable status of the specified voice VLAN for DHCP clients. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolVoiceVlanId together, and any SET operation alone to this object will be regarded as an invalid operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.1.1.33 |
h3cDhcpServer2PoolRowStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.1.1.34 |
h3cDhcpServer2PoolVerifyClassEnable the user class verification. When the value of this object is set to 'true', the DHCP server processes packets from DHCP clients in the defined user classes. The user class verification does not apply to packets from DHCP clients with static bindings.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.1.1.35 |
h3cDhcpServer2IfApplyPoolTableA table for applying a DHCP pool on interfaces. SEQUENCE OF H3cDhcpServer2IfApplyPoolEntry .1.3.6.1.4.1.2011.10.2.122.2.2 |
h3cDhcpServer2IfApplyPoolEntryAn entry for applying a DHCP pool on the interface. H3cDhcpServer2IfApplyPoolEntry .1.3.6.1.4.1.2011.10.2.122.2.2.1 |
h3cDhcpServer2IfApplyPoolNameThe name of the DHCP pool that apply to the interface. If the object is set with a zero-length string, the configuration will be deleted.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.2.1.1 |
h3cDhcpServer2PoolSecNwTableA table containing the secondary network configuration of DHCP pools. SEQUENCE OF H3cDhcpServer2PoolSecNwEntry .1.3.6.1.4.1.2011.10.2.122.2.3 |
h3cDhcpServer2PoolSecNwEntryAn entry containing the objects for configuring the secondary network for DHCP pools. H3cDhcpServer2PoolSecNwEntry .1.3.6.1.4.1.2011.10.2.122.2.3.1 |
h3cDhcpServer2PoolSecNwNetwork address of the secondary subnets in a DHCP pool. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.3.1.1 |
h3cDhcpServer2PoolSecNwMaskNetwork mask of the secondary subnets in a DHCP pool. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.3.1.2 |
h3cDhcpServer2PoolSecNwGwIPGateway IP addresses of the secondary subnets in a DHCP pool. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a secondary network, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.3.1.3 |
h3cDhcpServer2PoolSecNwStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.3.1.4 |
h3cDhcpServer2PoolClassTableA table containing address range of the DHCP server pool for user classes. SEQUENCE OF H3cDhcpServer2PoolClassEntry .1.3.6.1.4.1.2011.10.2.122.2.4 |
h3cDhcpServer2PoolClassEntryAn entry containing address range of DHCP pools for user classes. H3cDhcpServer2PoolClassEntry .1.3.6.1.4.1.2011.10.2.122.2.4.1 |
h3cDhcpServer2PoolClassNameUser class name. OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.4.1.1 |
h3cDhcpServer2PoolClassStartStart address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolClassEnd together, and any SET operation alone to this object will be regarded as an invalid operation.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.4.1.2 |
h3cDhcpServer2PoolClassEndEnd address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolClassStart together, and any SET operation alone to this object will be regarded as an invalid operation. This object must be set with an IP address NOT smaller than the value of h3cDhcpServer2PoolClassStart.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.4.1.3 |
h3cDhcpServer2PoolClassStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolClassStart and h3cDhcpServer2PoolClassEnd must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.4.1.4 |
h3cDhcpServer2PoolStaticTableA table containing the static binding configurations in DHCP pools. SEQUENCE OF H3cDhcpServer2PoolStaticEntry .1.3.6.1.4.1.2011.10.2.122.2.5 |
h3cDhcpServer2PoolStaticEntryAn entry containing the objects for configuring the static binding in DHCP pools. H3cDhcpServer2PoolStaticEntry .1.3.6.1.4.1.2011.10.2.122.2.5.1 |
h3cDhcpServer2PoolStaticIPIp address of a static binding in a DHCP pool. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.5.1.1 |
h3cDhcpServer2PoolStaticMaskNetwork mask of a static binding in a DHCP pool.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.5.1.2 |
h3cDhcpServer2PoolStaticCIDClient identifier of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.5.1.3 |
h3cDhcpServer2PoolStaticHAddrHardware address of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.5.1.4 |
h3cDhcpServer2PoolStaticHTypeHardware type of a DHCP client that the IP address binds to. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolStaticHAddr, and any SET operation alone to this object will be regarded as an invalid operation. 'default' indicates that the hardware type is unknown. If the value of h3cDhcpServer2PoolStaticCID is set to a non-zero length string, the object is set with 'default' automatically. Otherwise it cannot be set with 'default'. 'ethernet' indicates that the hardware type is ethernet. If the value of h3cDhcpServer2PoolStaticHAddr is set with a non-zero length string, the default value of this object is 'ethernet'. 'tokenRing' indicates that the hardware type is token-ring.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.2.5.1.5 |
h3cDhcpServer2PoolStaticStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolStaticCID or (h3cDhcpServer2PoolStaticHardAddr and h3cDhcpServer2PoolStaticHardType) must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.5.1.6 |
h3cDhcpServer2PoolOptionTableA table for configuring user-defined options for DHCP pools. SEQUENCE OF H3cDhcpServer2PoolOptionEntry .1.3.6.1.4.1.2011.10.2.122.2.6 |
h3cDhcpServer2PoolOptionEntryAn entry containing the objects for configuring user-defined options for DHCP pools. H3cDhcpServer2PoolOptionEntry .1.3.6.1.4.1.2011.10.2.122.2.6.1 |
h3cDhcpServer2PoolOptCodeOption code. Integer32 .1.3.6.1.4.1.2011.10.2.122.2.6.1.1 |
h3cDhcpServer2PoolOptTypeOption type. 'ascii' means using the ascii string that is defined by h3cDhcpServer2PoolOptAscii to fill in the option. 'hex' means using the hex string that is defined by h3cDhcpServer2PoolOptHexStr to fill in the option. 'ip' means using the IP string that is defined by h3cDhcpServer2PoolOptIPStr to fill in the option.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.2.6.1.2 |
h3cDhcpServer2PoolOptAsciiAscii string of an option. If h3cDhcpServer2PoolOptType is set with 'ascii', this object must be set with a non-zero length string.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.6.1.3 |
h3cDhcpServer2PoolOptHexStrHex string of an option. The length of the string must be even. If h3cDhcpServer2PoolOptType is set with 'hex', this object must be set with a non-zero length string.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.6.1.4 |
h3cDhcpServer2PoolOptIPStrIP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If h3cDhcpServer2PoolOptType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.6.1.5 |
h3cDhcpServer2PoolOptRowStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolOptType must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.6.1.6 |
h3cDhcpServer2PoolForbidTableA table for configuring forbidden IP for a DHCP server pool. SEQUENCE OF H3cDhcpServer2PoolForbidEntry .1.3.6.1.4.1.2011.10.2.122.2.7 |
h3cDhcpServer2PoolForbidEntryAn entry for configuring forbidden IP for a DHCP server pool. H3cDhcpServer2PoolForbidEntry .1.3.6.1.4.1.2011.10.2.122.2.7.1 |
h3cDhcpServer2PoolForbidIPForbidden IP of the DHCP pool. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.7.1.1 |
h3cDhcpServer2PoolForbidStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.7.1.2 |
h3cDhcpServer2ClassTableA table for configuring user class to DHCP server. SEQUENCE OF H3cDhcpServer2ClassEntry .1.3.6.1.4.1.2011.10.2.122.2.8 |
h3cDhcpServer2ClassEntryAn entry for configuring user class to DHCP server. H3cDhcpServer2ClassEntry .1.3.6.1.4.1.2011.10.2.122.2.8.1 |
h3cDhcpServer2ClassNameDHCP user class name. OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.8.1.1 |
h3cDhcpServer2ClassRowStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.8.1.2 |
h3cDhcpServer2RuleTableA table for configuring option rules used to match DHCP users. SEQUENCE OF H3cDhcpServer2RuleEntry .1.3.6.1.4.1.2011.10.2.122.2.9 |
h3cDhcpServer2RuleEntryAn entry for configuring option rules used to match DHCP users. H3cDhcpServer2RuleEntry .1.3.6.1.4.1.2011.10.2.122.2.9.1 |
h3cDhcpServer2RuleNumberRule number. Integer32 .1.3.6.1.4.1.2011.10.2.122.2.9.1.1 |
h3cDhcpServer2RuleOptCodeOption code.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.9.1.2 |
h3cDhcpServer2RuleOptHexStrHex string of an option. The length of the string must be even.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.9.1.3 |
h3cDhcpServer2RuleOptMaskThe mask used to match options. The length of this object must be same with that of h3cDhcpServer2RuleOptHexStr. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptHexStr.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.9.1.4 |
h3cDhcpServer2RuleOptOffsetThe option offset used to match users. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptHexStr, h3cDhcpServer2RuleOptLength.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.9.1.5 |
h3cDhcpServer2RuleOptLengthThe option length used to match user options. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptOffset.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.9.1.6 |
h3cDhcpServer2RuleRowStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2RuleOptCode must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.9.1.7 |
h3cDhcpServer2ForbidTableA table for configuring forbidden IP range to DHCP server. SEQUENCE OF H3cDhcpServer2ForbidEntry .1.3.6.1.4.1.2011.10.2.122.2.10 |
h3cDhcpServer2ForbidEntryAn entry for configuring forbidden IP range to DHCP server. H3cDhcpServer2ForbidEntry .1.3.6.1.4.1.2011.10.2.122.2.10.1 |
h3cDhcpServer2ForbidVpnNameName of the VPN instance that the forbidden IP range binds to. If the value of this object is 0x1, the network that the forbidden IP range belongs to is the public network. OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.10.1.1 |
h3cDhcpServer2ForbidStartStart IP of forbidden IP range. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.10.1.2 |
h3cDhcpServer2ForbidEndEnd IP of forbidden IP range. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.10.1.3 |
h3cDhcpServer2ForbidRowStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.10.1.4 |
h3cDhcpServer2FreeTableA table for displaying free IP range for DHCP server. SEQUENCE OF H3cDhcpServer2FreeEntry .1.3.6.1.4.1.2011.10.2.122.2.11 |
h3cDhcpServer2FreeEntryAn entry for displaying free IP range for DHCP server. H3cDhcpServer2FreeEntry .1.3.6.1.4.1.2011.10.2.122.2.11.1 |
h3cDhcpServer2FreeStartStart IP of free IP range. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.11.1.1 |
h3cDhcpServer2FreeEndEnd IP of free IP range.ro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.11.1.2 |
h3cDhcpServer2ConflictTableA table for displaying the information of conflict IP for DHCP server. SEQUENCE OF H3cDhcpServer2ConflictEntry .1.3.6.1.4.1.2011.10.2.122.2.12 |
h3cDhcpServer2ConflictEntryAn entry for displaying the information of conflict IP for DHCP server. H3cDhcpServer2ConflictEntry .1.3.6.1.4.1.2011.10.2.122.2.12.1 |
h3cDhcpServer2ConflictIPConflict IP. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.12.1.1 |
h3cDhcpServer2ConflictTypeType of the detection of conflict IP. 'detectByServer' denotes that the conflict is detected by DHCP server. 'detectByClient' denotes that the conflict is detected by DHCP client.ro Enumeration .1.3.6.1.4.1.2011.10.2.122.2.12.1.2 |
h3cDhcpServer2ConflictTimeTime when the conflict is detected. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).ro OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.12.1.3 |
h3cDhcpServer2ConflictRowStatusRowStatus. Only destroy action is allow to use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.12.1.4 |
h3cDhcpServer2ExpiredTableA table for displaying the information of expired IP for DHCP Server pools. SEQUENCE OF H3cDhcpServer2ExpiredEntry .1.3.6.1.4.1.2011.10.2.122.2.13 |
h3cDhcpServer2ExpiredEntryAn entry of objects for displaying information of expired IP for DHCP server pools. H3cDhcpServer2ExpiredEntry .1.3.6.1.4.1.2011.10.2.122.2.13.1 |
h3cDhcpServer2ExpiredIPExpired IP address. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.13.1.1 |
h3cDhcpServer2ExpiredClientIdClient identifier or hardware address.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.13.1.2 |
h3cDhcpServer2ExpiredTimeExpired time. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).ro OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.13.1.3 |
h3cDhcpServer2ExpiredRowStatusRowStatus. Only destroy action is allow to use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.13.1.4 |
h3cDhcpServer2IPInUseTableA table for displaying the information of IP in use for DHCP Server pools. SEQUENCE OF H3cDhcpServer2IPInUseEntry .1.3.6.1.4.1.2011.10.2.122.2.14 |
h3cDhcpServer2IPInUseEntryAn entry of objects for displaying information of IP in use for DHCP server pools. H3cDhcpServer2IPInUseEntry .1.3.6.1.4.1.2011.10.2.122.2.14.1 |
h3cDhcpServer2IPInUseIPIp address in use. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.2.14.1.1 |
h3cDhcpServer2IPInUseClientIdClient identifier.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.14.1.2 |
h3cDhcpServer2IPInUseHardAddrHardware address.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.14.1.3 |
h3cDhcpServer2IPInUseHardTypeHardware address type.ro Enumeration .1.3.6.1.4.1.2011.10.2.122.2.14.1.4 |
h3cDhcpServer2IPInUseVlanIdUser's VLAN ID. 65535 means that a client doesn't have VLAN ID or have an invalid VLAN ID.ro Unsigned32(1..4094|65535) .1.3.6.1.4.1.2011.10.2.122.2.14.1.5 |
h3cDhcpServer2IPInUseEndLeaseEnd time of lease. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).ro OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.14.1.6 |
h3cDhcpServer2IPInUseTypeType of binding.ro Enumeration .1.3.6.1.4.1.2011.10.2.122.2.14.1.7 |
h3cDhcpServer2IPInUseIfIndexInterface index information. If the value of this object is zero, the interface is unknown.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.10.2.122.2.14.1.8 |
h3cDhcpServer2IPInUseRowStatusRowStatus. Only destroy action is allow to use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.14.1.9 |
h3cDhcpServer2DefOptGrpTableA table containing option group of the DHCP server pool for user classes. SEQUENCE OF H3cDhcpServer2DefOptGrpEntry .1.3.6.1.4.1.2011.10.2.122.2.15 |
h3cDhcpServer2DefOptGrpEntryAn entry containing option group of DHCP pools for user classes. H3cDhcpServer2DefOptGrpEntry .1.3.6.1.4.1.2011.10.2.122.2.15.1 |
h3cDhcpServer2DefOptGrpClassUser class name. OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.15.1.1 |
h3cDhcpServer2DefOptGrpIdThe option group ID.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.15.1.2 |
h3cDhcpServer2DefOptGrpStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2DefOptGrpId must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.15.1.3 |
h3cDhcpServer2ValidClassTableA table containing valid user classes for DHCP server pool. SEQUENCE OF H3cDhcpServer2ValidClassEntry .1.3.6.1.4.1.2011.10.2.122.2.16 |
h3cDhcpServer2ValidClassEntryAn entry containing valid user classes for DHCP server pool. H3cDhcpServer2ValidClassEntry .1.3.6.1.4.1.2011.10.2.122.2.16.1 |
h3cDhcpServer2ValidClassNameUser class name. OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.16.1.1 |
h3cDhcpServer2ValidClassStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.16.1.2 |
h3cDhcpServer2RuleHwAddrTableA table for configuring hardware address rules used to match DHCP users. SEQUENCE OF H3cDhcpServer2RuleHwAddrEntry .1.3.6.1.4.1.2011.10.2.122.2.17 |
h3cDhcpServer2RuleHwAddrEntryAn entry for configuring hardware address rules used to match DHCP users. H3cDhcpServer2RuleHwAddrEntry .1.3.6.1.4.1.2011.10.2.122.2.17.1 |
h3cDhcpServer2RuleHwAddrNumberRule number. Integer32 .1.3.6.1.4.1.2011.10.2.122.2.17.1.1 |
h3cDhcpServer2RuleHwAddressHardware address for a rule. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2RuleHwAddrMask together, and any SET operation alone to this object will be regarded as an invalid operation.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.17.1.2 |
h3cDhcpServer2RuleHwAddrMaskMask of hardware address for a rule. The structure of the OCTET STRING is the same with h3cDhcpServer2RuleHwAddress. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2RuleHwAddress together, and any SET operation alone to this object will be regarded as an invalid operation.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.17.1.3 |
h3cDhcpServer2RuleHwAddrTypeHardware type for a rule. The codes of all hardware types see ARP section in RFC 1700. The SET operation alone to this object will be regarded as an invalid operation.rw Integer32 .1.3.6.1.4.1.2011.10.2.122.2.17.1.4 |
h3cDhcpServer2RuleHwAddrStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2RuleHwAddrAddress and h3cDhcpServer2RuleHwAddrMask must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.17.1.5 |
h3cDhcpServer2OptionGroupTableA table for creating DHCP server option groups. SEQUENCE OF H3cDhcpServer2OptionGroupEntry .1.3.6.1.4.1.2011.10.2.122.2.18 |
h3cDhcpServer2OptionGroupEntryAn entry containing objects for creating or deleting an option group. H3cDhcpServer2OptionGroupEntry .1.3.6.1.4.1.2011.10.2.122.2.18.1 |
h3cDhcpServer2OptionGroupIdThe option group ID. Integer32 .1.3.6.1.4.1.2011.10.2.122.2.18.1.1 |
h3cDhcpServer2OptionGroupStatusRowStatus. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.18.1.2 |
h3cDhcpServer2OptionTableA table for configuring options in an option group. SEQUENCE OF H3cDhcpServer2OptionEntry .1.3.6.1.4.1.2011.10.2.122.2.19 |
h3cDhcpServer2OptionEntryAn entry containing objects for configuring an option in an option group. H3cDhcpServer2OptionEntry .1.3.6.1.4.1.2011.10.2.122.2.19.1 |
h3cDhcpServer2OptionCodeOption code. Integer32 .1.3.6.1.4.1.2011.10.2.122.2.19.1.1 |
h3cDhcpServer2OptionTypeOption type. 'ascii' means using the ascii string that is defined by h3cDhcpServer2OptionAscii to fill in the option. 'hex' means using the hex string that is defined by h3cDhcpServer2OptionHexStr to fill in the option. 'ip' means using the IP string that is defined by h3cDhcpServer2OptionIPStr to fill in the option.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.2.19.1.2 |
h3cDhcpServer2OptionAsciiAscii string of an option. If h3cDhcpServer2OptionType is set with 'ascii', this object must be set with a non-zero length string.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.19.1.3 |
h3cDhcpServer2OptionHexStrHex string of an option. The length of the string must be even. If h3cDhcpServer2OptionType is set with 'hex', this object must be set with a non-zero length string.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.19.1.4 |
h3cDhcpServer2OptionIPStrIP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If h3cDhcpServer2OptionType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.2.19.1.5 |
h3cDhcpServer2OptionRowStatusRowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2OptionType must also be set.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.2.19.1.6 |
h3cDhcpRelay2ScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.122.3 |
h3cDhcpRelay2ConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.122.3.1 |
h3cDhcpRelay2UserInfoRecordIf the value is 'true', user information will be recorded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.3.1.1 |
h3cDhcpRelay2UserInfoRefreshIf the value is 'true', user information will be refreshed on timer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.3.1.2 |
h3cDhcpRelay2UserInfoFlushTimeUser information refresh interval in seconds. If the value of the object is set to 0, the interval is calculated automatically by the number of user information entries.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.122.3.1.3 |
h3cDhcpRelay2ReleaseAddrUser address to be released. The structure of the OCTET STRING is IP address:VPN name. If the VPN instance name is NOT specified, the IP address is in public network.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.3.1.4 |
h3cDhcpRelay2StatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.122.3.2 |
h3cDhcpRelay2RxClientNumThe total number of the packets received from DHCP clients by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.1 |
h3cDhcpRelay2TxClientNumThe total number of the packets transmitted to DHCP clients by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.2 |
h3cDhcpRelay2RxServerNumThe total number of the packets received from DHCP Servers by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.3 |
h3cDhcpRelay2TxServerNumThe total number of the packets transmitted to DHCP Servers by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.4 |
h3cDhcpRelay2BadNumThe total number of the bad packets received.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.5 |
h3cDhcpRelay2BootpRequestNumThe total number of the BOOTREQUEST packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.6 |
h3cDhcpRelay2DiscoverNumThe total number of the DHCPDISCOVER packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.7 |
h3cDhcpRelay2RequestNumThe total number of the DHCPREQUEST packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.8 |
h3cDhcpRelay2DeclineNumThe total number of the DHCPDECLINE packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.9 |
h3cDhcpRelay2ReleaseNumThe total number of the DHCPRELEASE packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.10 |
h3cDhcpRelay2InformNumThe total number of the DHCPINFORM packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.11 |
h3cDhcpRelay2BootpReplyNumThe total number of the BOOTREPLY packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.12 |
h3cDhcpRelay2OfferNumThe total number of the DHCPOFFER packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.13 |
h3cDhcpRelay2AckNumThe total number of the DHCPACK packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.14 |
h3cDhcpRelay2NakNumThe total number of the DHCPNAK packets handled by DHCP relay.ro Counter64 .1.3.6.1.4.1.2011.10.2.122.3.2.15 |
h3cDhcpRelay2Tables OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.122.4 |
h3cDhcpRelay2IfConfigTableA table for configuring relay functions for interfaces. SEQUENCE OF H3cDhcpRelay2IfConfigEntry .1.3.6.1.4.1.2011.10.2.122.4.1 |
h3cDhcpRelay2IfConfigEntryAn entry for configuring relay functions for an interface. H3cDhcpRelay2IfConfigEntry .1.3.6.1.4.1.2011.10.2.122.4.1.1 |
h3cDhcpRelay2IfSelectRelayIf the value is 'true', the DHCP relay function would be enabled on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.4.1.1.1 |
h3cDhcpRelay2IfCheckMacIf the value is 'true', the function of checking MAC address of packets received from the interface would be enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.4.1.1.2 |
h3cDhcpRelay2IfOpt82EnableIf DHCP relay supports option 82 functions, the value is 'true'. If DHCP relay does NOT support option 82 functions, the value is 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.4.1.1.3 |
h3cDhcpRelay2IfOpt82StrategyThe strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.4.1.1.4 |
h3cDhcpRelay2IfOpt82CIDModeThe mode of the circuit ID suboption of DHCP option 82. 'normal' is the standard mode. 'verbose' is the detailed mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', h3cDhcpRelay2IfOpt82CIDStr must also be set.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.4.1.1.5 |
h3cDhcpRelay2IfOpt82CIDNodeTypeType of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of h3cDhcpRelay2IfOpt82CIDMode is set to 'verbose'. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode. 'invalid' indicates that the node identifier is NOT used to fill in the circuit ID suboption of option 82. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'verbose', the value of this object is set to 'invalid' automatically. Otherwise the value of this object cannot be set to 'invalid'. 'mac' indicates that the node identifier is filled in with the MAC of DHCP relay input interface. If the value of h3cDhcpRelay2IfOpt82CIDMode is set to 'verbose', the default value of this object is 'mac'. 'sysname' indicates that the node identifier is filled in with the sysname of the DHCP relay device. 'userDefine' indicates that the node identifier is filled in with the string defined by the object of h3cDhcpRelay2IfOpt82CIDNodeStr. If the value is set to 'userDefine', the value of h3cDhcpRelay2IfOpt82CIDNodeStr must be set to a non-zero length string simultaneously.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.4.1.1.6 |
h3cDhcpRelay2IfOpt82CIDNodeStrThe string defined by user to fill in the node identifier in the verbose mode. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'verbose', or the value of h3cDhcpRelay2IfOpt82CIDNodeType is NOT 'userDefine', it is set with a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode and h3cDhcpRelay2IfOpt82CIDNodeType.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.4.1.1.7 |
h3cDhcpRelay2IfOpt82CIDStrThe string defined by user to fill in the circuit ID suboption of option 82 in the user-define mode. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.4.1.1.8 |
h3cDhcpRelay2IfOpt82CIDFormatThe format of the circuit ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. 'undefine' is the undefine format. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'normal', the value of this object is set to 'hex' automatically and cannot be set to 'undefine'. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'verbose', the default value of this object is 'undefine'. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'userDefine', the value of this object is set to 'ascii' automatically and cannot be set to other value. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.4.1.1.9 |
h3cDhcpRelay2IfOpt82RIDModeThe mode of the remote ID suboption of DHCP option 82. 'normal' is the standard mode. 'sysname' is the sysname mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', h3cDhcpRelay2IfOpt82RIDStr must also be set.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.4.1.1.10 |
h3cDhcpRelay2IfOpt82RIDStrThe string defined by user to fill in the remote ID in the user-defined mode. If the value of h3cDhcpRelay2IfOpt82RIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82RIDMode.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.122.4.1.1.11 |
h3cDhcpRelay2IfOpt82RIDFormatThe format of the remote ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. If the value of h3cDhcpRelay2IfOpt82RIDMode is 'sysname' or 'userDefine', this object is set with 'ascii' automatically and cannot be set with other value. If the value of h3cDhcpRelay2IfOpt82RIDMode is 'normal', the default value of this object is 'hex'. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82RIDMode.rw Enumeration .1.3.6.1.4.1.2011.10.2.122.4.1.1.12 |
h3cDhcpRelay2SrvAddrTableA table for configuring a DHCP server address on the interface. SEQUENCE OF H3cDhcpRelay2SrvAddrEntry .1.3.6.1.4.1.2011.10.2.122.4.2 |
h3cDhcpRelay2SrvAddrEntryAn entry for configuring a DHCP server address on the interface. H3cDhcpRelay2SrvAddrEntry .1.3.6.1.4.1.2011.10.2.122.4.2.1 |
h3cDhcpRelay2SrvAddrIPIp address of DHCP server. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.4.2.1.1 |
h3cDhcpRelay2SrvAddrRowStatusOperation status of this table entry. Three actions are used: active, createAndGo, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.4.2.1.2 |
h3cDhcpRelay2UserInfoTableA table containing the user information of DHCP client. SEQUENCE OF H3cDhcpRelay2UserInfoEntry .1.3.6.1.4.1.2011.10.2.122.4.3 |
h3cDhcpRelay2UserInfoEntryAn entry containing the user information of DHCP client. H3cDhcpRelay2UserInfoEntry .1.3.6.1.4.1.2011.10.2.122.4.3.1 |
h3cDhcpRelay2UserInfoVpnIndexVPN index of the DHCP client. Unsigned32(0 .. 65534) .1.3.6.1.4.1.2011.10.2.122.4.3.1.1 |
h3cDhcpRelay2UserInfoIpAddrDHCP client's IP address. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.122.4.3.1.2 |
h3cDhcpRelay2UserInfoMacAddrDHCP client's MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.4.3.1.3 |
h3cDhcpRelay2UserInfoIfIndexThe index of the interface that DHCP client adhered to. 0 means that no interface information is recorded in the user information entry.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.10.2.122.4.3.1.4 |
h3cDhcpRelay2UserInfoRowStatusOperation status of this table entry. Only destroy action is allow to use.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.122.4.3.1.5 |