HUAWEI-BRAS-MVLAN-MIB
AI MIB Summary
The HUAWEI-BRAS-MVLAN-MIB provides management objects for Huawei Broadband Remote Access Servers (BRAS) to configure and monitor Multi-VLAN (MVLAN) services, including VLAN group definitions, port-to-VLAN mappings, and associated session states. This module enables administrators to track MVLAN-specific traffic statistics, interface bindings, and operational status for broadband aggregation and subscriber management.
The HUAWEI-BRAS-MVLAN-MIB contains objects to manage BRAS.
Main OID:
hwMVLAN.1.3.6.1.4.1.2011.5.25.40.14
11
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
hwMVLANThe HUAWEI-BRAS-MVLAN-MIB contains objects to
manage BRAS. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.40.14 |
hwhwMVLANMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.40.14.1 |
hwMulticastVlanTableA table of setting multicast program VlanTable. SEQUENCE OF HWMulticastVlanEntry .1.3.6.1.4.1.2011.5.25.40.14.1.1 |
hwMulticastVlanEntryAn entry of hwMulticastVlanEntry. HWMulticastVlanEntry .1.3.6.1.4.1.2011.5.25.40.14.1.1.1 |
hwMulticastVlanIfIndexA value used to index per-VLAN tables: values of 0 and
4095 are not permitted. If the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095,
then it represents a VLAN with scope local to the
particular agent, i.e., one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q, but it is convenient to be able to manage them
in the same way using this MIB.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.40.14.1.1.1.1 |
hwMulticastInnerVlanThe hwMulticastInnerVlan that uniquely identifies a VLAN. This
is the 12-bit VLAN-ID used in the VLAN Tag header.
The range is defined by the REFERENCEd specification.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.40.14.1.1.1.2 |
hwMulticastOuterVlanThe hwMulticastOuterVlan that uniquely identifies a VLAN. This
is the 12-bit VLAN-ID used in the VLAN Tag header.
The range is defined by the REFERENCEd specification.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.40.14.1.1.1.3 |
hwMulticastOpType0 : set multicast-vlan.
1 : undo multicast-vlan.rw Enumeration .1.3.6.1.4.1.2011.5.25.40.14.1.1.1.4 |
hwMVlanMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.40.14.2 |
hwMVlanMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.40.14.2.1 |
hwMVlanMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.40.14.2.2 |