H3C-EPON-UNI-MIB
The objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit).
Main OID:
h3cEponUni.1.3.6.1.4.1.2011.10.2.42.5
145
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
145 total| Object Name |
|---|
h3cEponUniThe objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit). MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.42.5 |
h3cEponUniSysMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.5.1 |
h3cEponUniSysManTableThis table defines several UNI system parameters. SEQUENCE OF H3cEponUniSysManEntry .1.3.6.1.4.1.2011.10.2.42.5.1.1 |
h3cEponUniSysManEntryThe entry of h3cEponUniSysManTable. H3cEponUniSysManEntry .1.3.6.1.4.1.2011.10.2.42.5.1.1.1 |
h3cEponUniIndexThe index value which uniquely identifies the FE(fast Ethernet) interface of the ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.1 |
h3cEponUniDescrA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.2 |
h3cEponUniAdminStatusThe desired state of the user network interface. When a managed system initializes, all user network interfaces start with down(2) state. The testing(3)state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, h3cEponUniAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.3 |
h3cEponUniMdiType of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.4 |
h3cEponUniPriorityThe priority of user network interface. If the value is larger, the priority will be higher.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.5 |
h3cEponUniVlanTypeUNI vlan types.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.6 |
h3cEponUniAccessVlanThe vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.7 |
h3cEponUniTrunkPvidPVID(port vlan ID), the vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface.rw INTEGER .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.8 |
h3cEponUniVLANTrunkAllowListLowEach octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans. the vlan is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.9 |
h3cEponUniVLANTrunkAllowListHighEach octet within this value specifies a set of eight vlans, with the first octet specifying vlans 2049 through 2056, the second octet specifying vlans 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered vlan, and the least significant bit represents the lowest numbered vlan. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans; the vlan is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.10 |
h3cEponUniInboundLineRateThe value of the inbound line-rate. measured with kbps. The upper limit of the line-rate is the value of h3cEponUniLineRateMax in the entry. It must be multiple of the value of h3cEponUniLineRateStep. The default value of h3cEponUniLineRate is the value of h3cEponUniLineRateMax.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.11 |
h3cEponUniOutboundLineRateThe value of the outbound line-rate. measured with kbps. The upper limit of the line-rate is the value of h3cEponUniLineRateMax in the entry. It must be multiple of the value of h3cEponUniLineRateStep. The default value of h3cEponUniLineRate is the value of h3cEponUniLineRateMax.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.12 |
h3cEponUniFlowControlFlow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.13 |
h3cEponUniSpeedUser network interface speed.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.14 |
h3cEponUniDuplexUser network interface mode.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.15 |
h3cEponUniVlanVPNStatusvlan VPN status. true(1) - vlan VPN status enable. false(2) - vlan VPN disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.16 |
h3cEponUniCountResetReset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.17 |
h3cEponUniPortIsolateenable - enable UNI port isolate setting. disable - disable UNI port isolate setting.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.18 |
h3cEponUniVlanConfigurationThe vlan configuration of the related vlan mode. Transparent vlan mode: h3cEponUniVlanConfiguration is a zero length string. Tag vlan mode: the first four octets were the tag assigned to untagged frames received on UNI, including TPID, VID,CFI and priority. Translation vlan mode: the first four octets were the old tag (including TPID, VID, CFI and priority), which is replaced by the new tag(including TPID, VID, CFI and priority), the second four octets.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.23 |
h3cEponUniAutoNegotiationenable - enable auto negotiation. disable - disable auto negotiation.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.25 |
h3cEponUniRestartAutoNegForce to restart the auto negotiation process.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.26 |
h3cEponUniLinkStatusThe link status of UNI.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.29 |
h3cEponUniInterfaceTypeUNI interface type.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.30 |
h3cEponUniVitualCableTestTrue(1): Virtual cable test enable. False(2): Virtual cable test disable.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.31 |
h3cEponUniVCTCableStatusGet the cable status. Normal(1),cable is normal. Abnormal(2),cable is abnormal. AbnormalOpen(3),cable is abnormal because of open circuit. AbnormalShort(4),cable is abnormal because of short circuit. Failure(5),cable is abnormal because of testing failure.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.32 |
h3cEponUniVCTCableLengthGet the cable length. When h3cEponUniVCTCableStatus is normal, the node stands for the length from the UNI port to the port opposite. When h3cEponUniVCTCableStatus is abnormal, it stands for the lengh from the UNI port to the failure place. Unit:meter(m).ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.33 |
h3cEponUniVCTImpedanceMismatchGet the cable impedance. Not-support(1),the UNI port does not support this function. True(2),impedance match. False(3),impedance mismatch.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.34 |
h3cEponUniVCTPairSkewGet the symmetry of cable. If the function is not supported , the default value 0 will be returned. Unit:nanosecond(ns).ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.35 |
h3cEponUniVCTPairSwapNotSupport(1),the UNI port does not support this function. True(2),pair swap. False(3),not pair swap.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.36 |
h3cEponUniVCTPolaritySwapNotSupport(1),the UNI port does not support this function. True(2),polarity swap. False(3),not polarity swap.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.37 |
h3cEponUniVCTInsertionLossIf the function is not supported , the default value 0 will be returned. Unit:decibel(db).ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.38 |
h3cEponUniVCTReturnLossIf the function is not supported , the default value 0 will be returned. Unit:decibel(db).ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.39 |
h3cEponUniVCTNearendCrosstalkIf the function is not supported , the default value 0 will be returned. Unit:decibel(db).ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.1.1.40 |
h3cEponUniCountTableA list of interface counter about frames entries. SEQUENCE OF H3cEponUniCountEntry .1.3.6.1.4.1.2011.10.2.42.5.1.2 |
h3cEponUniCountEntryAn entry containing management information applicable to a particular interface. H3cEponUniCountEntry .1.3.6.1.4.1.2011.10.2.42.5.1.2.1 |
h3cEponUniInStatsPktsThe total number of frames (including bad frames, broadcast frames, and multicast frames) received.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.1 |
h3cEponUniInStatsUnicastPktsThe total number of good frames received that are directed to the unicast address. Note that this does not include multicast and broadcast frames.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.2 |
h3cEponUniInStatsBroadcastPktsThe total number of good frames received that are directed to the broadcast address. Note that this does not include multicast frames.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.3 |
h3cEponUniInStatsMulticastPktsThe total number of good frames received that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.4 |
h3cEponUniInPausePktsA count of MAC Control frames received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.5 |
h3cEponUniInTotalErrorsTotal count of the error frames received on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.6 |
h3cEponUniInStatsCRCAlignErrorsThe total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.7 |
h3cEponUniInStatsUndersizePktsThe total number of frames received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.8 |
h3cEponUniInStatsOversizePktsThe total number of frames received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.9 |
h3cEponUniInErrorbyOtherThe total number of error frames received on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.10 |
h3cEponUniOutStatsPktsThe total number of frames (including bad frames, broadcast frames, and multicast frames) sent.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.11 |
h3cEponUniOutStatsUnicastPktsThe total number of good frames sent that are directed to the unicast address. Note that this does not include multicast and broadcast frames.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.12 |
h3cEponUniOutStatsBroadcastPktsThe total number of good frames sent that are directed to the broadcast address. Note that this does not include multicast frames.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.13 |
h3cEponUniOutStatsMulticastPktsThe total number of good frames sent that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.14 |
h3cEponUniOutStatsPausePktsThe total number of MAC control frames sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.15 |
h3cEponUniOutTotalErrorsThe total number of error frames sent on this interface.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.16 |
h3cEponUniOutStatsCollisionsThe best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.17 |
h3cEponUniOutDelayExceededDiscardsThe number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.18 |
h3cEponUniOutErrorbyOtherThe total number of other error frames sent on this interface. Other error frames means the error frames out of collision frames and excessive delayed frames.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.19 |
h3cEponUniOutDroppedFramesThe total number of frames dropped because of buffer failure.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.42.5.1.2.1.20 |
h3cEponUniIgmpInfoTableThis table stores igmp information of UNI interface. SEQUENCE OF H3cEponUniIgmpInfoEntry .1.3.6.1.4.1.2011.10.2.42.5.1.3 |
h3cEponUniIgmpInfoEntryThe entry of h3cEponUniIgmpInfoTable. H3cEponUniIgmpInfoEntry .1.3.6.1.4.1.2011.10.2.42.5.1.3.1 |
h3cEponUniMacIndexThe index uniquely identifies the igmp information in current UNI interface. Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.3.1.1 |
h3cEponUniIgmpMacAddressA 6-octet read-only value carrying the individual MAC address indicates which igmp group the UNI interface belonging to.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.3.1.2 |
h3cEponUniIgmpVlanIdAn integer range from 1 to 4094 indicates the vlan which the igmp Mac address has joined in.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.3.1.3 |
h3cEponUniParaMan OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.5.1.4 |
h3cEponUniLineRateMaxThe maximum value of the line-rate(kbps) that user network interface can be set.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.4.1 |
h3cEponUniLineRateStepThe step of line-rate(kbps).ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.4.2 |
h3cEponUniNumberOnOnuThe user network interface number on ONU.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.4.3 |
h3cEponUniScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.5.1.5 |
h3cEponUniPortPolicyTableUNI port policy configuration. SEQUENCE OF H3cEponUniPortPolicyEntry .1.3.6.1.4.1.2011.10.2.42.5.1.6 |
h3cEponUniPortPolicyEntryThe entry of h3cEponUniPortPolicyTable. H3cEponUniPortPolicyEntry .1.3.6.1.4.1.2011.10.2.42.5.1.6.1 |
h3cEponUniPortPolicyStatusenable - enable UNI upstream port policing. disable - disable UNI upstream port policing.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.1 |
h3cEponUniPortPolicyCirThe committed information rate, ranging from 1 to 102400, measured in kbps.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.2 |
h3cEponUniPortPolicyBucketDepthThe depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.3 |
h3cEponUniPortPolicyExtraBurstThe extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.4 |
h3cEponUniPortPolicyInboundCirThe inbound committed information rate, measured in kbps.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.5 |
h3cEponUniPortPolicyInboundBucketDepthThe inbound depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.6 |
h3cEponUniPortPolicyInboundExtraBurstThe inbound extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.7 |
h3cEponUniPortPolicyOutboundCirThe outbound committed information rate, stepped by 64, measured in kbps.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.8 |
h3cEponUniPortPolicyOutboundPirThe outbound peak information rate, stepped by 64, measured in kbps.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.6.1.9 |
h3cEponUniMulticastTableUNI multicast configuration. SEQUENCE OF H3cEponUniMulticastEntry .1.3.6.1.4.1.2011.10.2.42.5.1.7 |
h3cEponUniMulticastEntryThe entry of h3cEponUniPortPolicyTable. H3cEponUniMulticastEntry .1.3.6.1.4.1.2011.10.2.42.5.1.7.1 |
h3cEponUniMulticastGroupNumberThe allowed multicast group number that can be handled at the same time by UNI.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.7.1.1 |
h3cEponUniMulticastVlanListThe multicast vlan list. The first two octets of the string represent the first VLAN ID; the second two octets of the string represent the second VLAN ID, and so on. It is a zero length string by default.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.7.1.2 |
h3cEponUniMulticastStripStatustrue - strip the vlan tag of multicast packet. false - does not strip the vlan tag of multicast packet.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.7.1.3 |
h3cEponUniMulticastFastleavetrue(1) - fast leave of IGMP enable on ONU. false(2) - fast leave of IGMP disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.7.1.4 |
h3cEponUniTechAbilityTableUNI multicast configuration. SEQUENCE OF H3cEponUniTechAbilityEntry .1.3.6.1.4.1.2011.10.2.42.5.1.8 |
h3cEponUniTechAbilityEntryThe entry of h3cEponUniTechAbilityTable. H3cEponUniTechAbilityEntry .1.3.6.1.4.1.2011.10.2.42.5.1.8.1 |
h3cEponUniLocalTechAbilityThe local port capabilities of the UNI. Each two octets stand for a capability of UNI: the first two octets represent one capability and the second two octets represent another capability, and so on. The capabilities list: 1 - undefined, 2 - initializing, true ability not yet known, 14 - 10BASE-T, 142 - full duplex 10BASE-T, 23 - 100BASE-T4, 25 - 100BASE-TX, 252 - full duplex 100BASE-TX, 312 - PAUSE operation for full duplex links, 313 - asymmetric PAUSE operation for full duplex links, 314 - symmetric PAUSE operation for full duplex links, 32 - 100BASE-T2, 322 - full duplex 100BASE-T2, 36 - 1000BASE-X, 362 - full duplex 1000BASE-X, 40 - 1000BASE-T UTP PHY, 402 - full duplex 1000BASE-T UTP PHY, 37 - remote fault bit 1(RF1), 372 - remote fault bit 2(RF2), 8029 - 802.9ISLAN-16T.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.8.1.1 |
h3cEponUniAdvertisedTechAbilityThe advertised port capabilities of the UNI. The capabilities list references the description of h3cEponUniLocalTechAbility.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.8.1.2 |
h3cEponUniMulticastControlTableUNI multicast control parameters. SEQUENCE OF H3cEponUniMulticastControlEntry .1.3.6.1.4.1.2011.10.2.42.5.1.9 |
h3cEponUniMulticastControlEntryThe entry of the table h3cEponUniMulticastControlTable. H3cEponUniMulticastControlEntry .1.3.6.1.4.1.2011.10.2.42.5.1.9.1 |
h3cEponUniMulticastVlanIndexThe multicast vlan ID.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.1 |
h3cEponUniMulticastAddressListThe multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.2 |
h3cEponUniMulticastAccessRuledeny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.3 |
h3cEponUniMulticastChannelLimitThe limitation of multicast preview channel number.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.4 |
h3cEponUniMulticastPreTimeSliceThe time slice of multicast preview.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.5 |
h3cEponUniMulticastPreTimesThe number of multicast preview times.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.6 |
h3cEponUniMulticastPreIntervalThe interval between two consecutive previews, measured in minute.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.7 |
h3cEponUniMulticastRowStatusThe status of this table entry. The active, createAndGo and the destory statuses are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.8 |
h3cEponUniMulticastIndexThe index of the entry. INTEGER .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.9 |
h3cEponUniMulticastSourceIpListThis list contains many source ip addresses. Each ip address is contained in four octets.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.10 |
h3cEponUniMulticastResetIntervalThe interval is measured in minute. From the last preview limitation is reached, a customer can preview again after this interval is expired.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.9.1.11 |
h3cEponUniQosIndexNextTableThe next index table. SEQUENCE OF H3cEponUniQosIndexNextEntry .1.3.6.1.4.1.2011.10.2.42.5.1.10 |
h3cEponUniQosIndexNextEntryThe entry of the table h3cEponUniQosIndexNextTable. H3cEponUniQosIndexNextEntry .1.3.6.1.4.1.2011.10.2.42.5.1.10.1 |
h3cEponUniQosConfIndexNextThis object contains an appropriate value to be used for h3cEponUniQosConfIndex when creating rows in the h3cEponUniQosConfTable.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.10.1.1 |
h3cEponUniQosConfTableUNI Qos configuration. SEQUENCE OF H3cEponUniQosConfEntry .1.3.6.1.4.1.2011.10.2.42.5.1.11 |
h3cEponUniQosConfEntryThe entry of the table h3cEponUniQosConfTable. H3cEponUniQosConfEntry .1.3.6.1.4.1.2011.10.2.42.5.1.11.1 |
h3cEponUniQosConfIndexThe rule index. Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.11.1.1 |
h3cEponUniQosConfRuleIndexNextThis object contains an appropriate value to be used for h3cEponUniQosRuleIndex when creating rows in the h3cEponUniQosRuleTable.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.11.1.2 |
h3cEponUniQosConfMappedQueueThe queue that the ethernet frames will be mapped.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.11.1.3 |
h3cEponUniQosConfMarkedPriorityPriority of the ethernet frames to be marked, which compliant with the 802.1D user priority standard.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.11.1.4 |
h3cEponUniQosConfRowStatusThe status of this table entry. The active, createAndGo and the destory statuses are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.11.1.5 |
h3cEponUniQosRuleTableQos sub rule of the UNI. SEQUENCE OF H3cEponUniQosRuleEntry .1.3.6.1.4.1.2011.10.2.42.5.1.12 |
h3cEponUniQosRuleEntryThe entry of the table h3cEponUniQosRuleTable. H3cEponUniQosRuleEntry .1.3.6.1.4.1.2011.10.2.42.5.1.12.1 |
h3cEponUniQosRuleIndexThe sub rule index. Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.12.1.1 |
h3cEponUniQosRuleSelectorThe ethernet frame selector. dstmac - based on destination MAC address. srcmac - based on source MAC address. ethernetpriority - based on ethernet priority. vlanid - based on VLAN ID. ethernettype - based on ethernet type. dstip - based on destination IP address. srcip - based on source IP address. ipprototype - based on IP type(ipv4 or ipv6). ipv4tosdscp - based on IP TOS/DSCP. ipv6 - based IP precedence. srcport - based on layer 4 source port. dstport - based on layer 4 destination port.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.12.1.2 |
h3cEponUniQosRuleValueThe rule value based on the h3cEponUniQosRuleSelector.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.12.1.3 |
h3cEponUniQosRuleMacAddressMAC Address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.12.1.4 |
h3cEponUniQosRuleOperatornervermatch - value never match. equal - field equal to the value. notequal - field not equal to the value. lessthanequal - field less than or equal to the value. greaterthanequal - field greater than or equal to the value. fieldexist - value is ignored if field exists. fieldnotexist - value is ignored if field does not exist. alwaysmatch - value always match.rw Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.12.1.5 |
h3cEponUniQosRuleRowStatusThe status of this table entry. Only active, createAndGo and the destory are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.12.1.6 |
h3cEponUniMirrorGroupTableQos sub rule of the UNI. SEQUENCE OF H3cEponUniMirrorGroupEntry .1.3.6.1.4.1.2011.10.2.42.5.1.13 |
h3cEponUniMirrorGroupEntryThe entry of the h3cEponUniMirrorGroupTable. H3cEponUniMirrorGroupEntry .1.3.6.1.4.1.2011.10.2.42.5.1.13.1 |
h3cEponUniMirrorGroupIDEpon UNI mirror group ID. Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.13.1.1 |
h3cEponUniMirrorInboundPortListUNI inbound port list. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered UNI, and the least significant bit represents the lowest numbered UNI. Thus, each UNI port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is allowed in the set of ports. the port is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.13.1.2 |
h3cEponUniMirrorOutboundPortListUNI outnbound port list, more infomation reference h3cEponUniMirrorInboundPortListrw OCTET STRING .1.3.6.1.4.1.2011.10.2.42.5.1.13.1.3 |
h3cEponUniMonitorPortUNI monitor port.rw Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.13.1.4 |
h3cEponUniMirrorRowStatusRowStatus, Now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.42.5.1.13.1.5 |
h3cEponUniMirrorGroupIdNextTableThe next index table, which is used by h3cEponUniMirrorGroupTable. SEQUENCE OF H3cEponUniMirrorGroupIdNextEntry .1.3.6.1.4.1.2011.10.2.42.5.1.14 |
h3cEponUniMirrorGroupIdNextEntryThe entry of the table h3cEponUniMirrorGroupIdNextEntry. H3cEponUniMirrorGroupIdNextEntry .1.3.6.1.4.1.2011.10.2.42.5.1.14.1 |
h3cEponUniMirrorGroupIDNextThis object contains an appropriate value to be used for h3cEponUniMirrorGroupID when creating rows in the h3cEponUniMirrorGroupTable.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.14.1.1 |
h3cEponUniMulticastCtrlInfoTableUNI multicast information which is active . SEQUENCE OF H3cEponUniMulticastCtrlInfoEntry .1.3.6.1.4.1.2011.10.2.42.5.1.15 |
h3cEponUniMulticastCtrlInfoEntryThe entry of the table h3cEponUniMulticastCtrlInfoTable. H3cEponUniMulticastCtrlInfoEntry .1.3.6.1.4.1.2011.10.2.42.5.1.15.1 |
h3cEponUniMultActVlanThe multicast vlan ID which is active. Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.15.1.1 |
h3cEponUniMultActAddressThe multicast address which is active. IpAddress .1.3.6.1.4.1.2011.10.2.42.5.1.15.1.2 |
h3cEponUniMultActAccessRuledeny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions.ro Enumeration .1.3.6.1.4.1.2011.10.2.42.5.1.15.1.3 |
h3cEponUniMultActPreTimesThe number of multicast preview times which is active.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.15.1.4 |
h3cEponUniMultActPreRemainThe remanent time slice of multicast preview which is active.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.15.1.5 |
h3cEponUniMulticastIndexNextTableThe next index table, which is used by h3cEponUniMulticastControlTable. SEQUENCE OF H3cEponUniMulticastIndexNextEntry .1.3.6.1.4.1.2011.10.2.42.5.1.16 |
h3cEponUniMulticastIndexNextEntryThe entry of the table h3cEponUniMulticastIndexNextEntry. H3cEponUniMulticastIndexNextEntry .1.3.6.1.4.1.2011.10.2.42.5.1.16.1 |
h3cEponUniMulticastConfIndexNextThis object contains an appropriate value to be used for h3cEponUniMulticastIndex when creating rows in the h3cEponUniMulticastControlTable.ro Integer32 .1.3.6.1.4.1.2011.10.2.42.5.1.16.1.1 |
h3cEponUniTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.5.2 |
h3cEponUniTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.42.5.2.0 |
h3cEponUniLinkUpTrapA h3cEponUniLinkUpTrap notification is sent when the UNI up event is detected and the transmitting switch is turned on. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.5.2.0.1 |
h3cEponUniLinkDownTrapA h3cEponUniLinkDownTrap notification is sent when the UNI down event is detected and the transmitting switch is turned on. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.42.5.2.0.2 |