H3C-RCR-MIB
This MIB is applicable to router-devices. It's made for RCR (Resilient Controllable Routing). RCR provides an effective resolution which can dynamically auto-adjust outbound traffic to the optimal external interface by monitoring the performance and traffic load of each external interface. It provides the functions of intelligentized traffic load distribution and the optimal external interface selection. This can optimally utilize the external interfaces. Furthermore, RCR realized the function which can select the optimal external interface based on different classes of operation flow.
Main OID:
h3cRcr.1.3.6.1.4.1.2011.10.2.48
58
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
h3cRcrThis MIB is applicable to router-devices. It's made for RCR (Resilient Controllable Routing). RCR provides an effective resolution which can dynamically auto-adjust outbound traffic to the optimal external interface by monitoring the performance and traffic load of each external interface. It provides the functions of intelligentized traffic load distribution and the optimal external interface selection. This can optimally utilize the external interfaces. Furthermore, RCR realized the function which can select the optimal external interface based on different classes of operation flow. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.48 |
h3cRcrMR OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.48.1 |
h3cRcrMRGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.48.1.1 |
h3cRcrMRAllMaxUsedBandRateThe max used band rate of all external interfaces on member router-devices(MRs) which are controlled by RCR.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.1.1.1 |
h3cRcrMRAllMinUsedBandRateThe min used band rate of all external interfaces on MRs which are controlled by RCR.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.1.1.2 |
h3cRcrMRListenTimeThe persistent time of a probe on member router-device(MR) which is controlled by RCR.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.1.1.3 |
h3cRcrMRStateTableThis table contains state information of each MR which is controlled by RCR. SEQUENCE OF H3cRcrMRStateEntry .1.3.6.1.4.1.2011.10.2.48.1.2 |
h3cRcrMRStateEntryEntry items H3cRcrMRStateEntry .1.3.6.1.4.1.2011.10.2.48.1.2.1 |
h3cRcrMRNameThe name of MR which is controlled by RCR. OCTET STRING .1.3.6.1.4.1.2011.10.2.48.1.2.1.1 |
h3cRcrMRStateThe state of MR where identified on the controller router-device(CR). down: The MR has been enabled but has not connected to the CR with TCP connection. up: The MR has already successfully connected to the CR but has not been ready for adjusting route. controlled: The MR has already passed the consultation with the CR and could be controlled by it.ro Enumeration .1.3.6.1.4.1.2011.10.2.48.1.2.1.2 |
h3cRcrMRAuthTypeThe authentication type of communication packet between CR and MR.rw Enumeration .1.3.6.1.4.1.2011.10.2.48.1.2.1.3 |
h3cRcrMRAuthPwdThe authentication password of communication packet between CR and MR. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.48.1.2.1.4 |
h3cRcrMROutIfStateTableThis table contains the external interface states of each MR which is controlled by RCR. SEQUENCE OF H3cRcrMROutIfStateEntry .1.3.6.1.4.1.2011.10.2.48.1.3 |
h3cRcrMROutIfStateEntryEntry items H3cRcrMROutIfStateEntry .1.3.6.1.4.1.2011.10.2.48.1.3.1 |
h3cRcrMROutIfNameThe name of external interface on each MR. OCTET STRING .1.3.6.1.4.1.2011.10.2.48.1.3.1.1 |
h3cRcrMROutIfStateThe state of external interface on each MR.ro Enumeration .1.3.6.1.4.1.2011.10.2.48.1.3.1.2 |
h3cRcrMROutIfMaxUsedBandRateThe max spendable bandwidth rate on external interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.1.3.1.3 |
h3cRcrMROutIfMinUsedBandRateThe min spendable bandwidth rate on external interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.1.3.1.4 |
h3cRcrMROutIfUsedBandRateThe used bandwidth rate on external interface.ro Integer32 .1.3.6.1.4.1.2011.10.2.48.1.3.1.5 |
h3cRcrCR OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.48.2 |
h3cRcrCRGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.48.2.1 |
h3cRcrCRStateThe state of the CR which is controlled by RCR. down: The CR has been enabled but has not started a TCP connection server. init: The CR has started a TCP connection server and has been waiting for MR connection, but has not been ready for adjusting route. active: The CR is ready for adjusting route.ro Enumeration .1.3.6.1.4.1.2011.10.2.48.2.1.1 |
h3cRcrCRPortNumThe communication port number between CR and MR.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.2.1.2 |
h3cRcrCRCtrlModeThe observe mode or control mode is configured to operate in the CR. observe: The CR monitors prefixes and external interfaces based on default and user-defined policies and then reports the status of the network and the decisions that should be made but does not implement any changes. controlled: The CR monitors prefixes and external interfaces based on default and user-defined policies and then reports the status of the network and the decisions that should be made and implement any changes.rw Enumeration .1.3.6.1.4.1.2011.10.2.48.2.1.3 |
h3cRcrCRChooseModeThe algorithm used to choose an alternative external interface for a prefix. good: The first external interface that conforms to the policy is selected as the new external interface. best: Information is collected from all external interfaces and the best one is selected even though the best external interface may not be in-policy.rw Enumeration .1.3.6.1.4.1.2011.10.2.48.2.1.4 |
h3cRcrCRKeepaliveTimeThe interval time of the transmission of the keepalive communication packet between CR and MR.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.2.1.5 |
h3cRcrCRPolicyModeThe chosen policy mode which decides to change what prefix. prefix: An RCR policy is designed to select IP prefixes or to select RCR learn policies using a match clause and then to apply RCR policy configurations using a set clause. operation: To deside to adjusted prefixes based on operation which user configured. study: To learn and optimize prefixes based on the highest throughput or the highest delay.rw Enumeration .1.3.6.1.4.1.2011.10.2.48.2.1.6 |
h3cRcrCRStudyModeThe mode of collecting prefix in studying configuration mode. It's to collect either the prefix of max thoughtout or the prefix of max delay time. It doesn't have a value when CR isn't in studying configuration mode.rw Enumeration .1.3.6.1.4.1.2011.10.2.48.2.1.7 |
h3cRcrCRStudyIpPrefixNumThe max number of collecting prefix in studying configuration mode.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.2.1.8 |
h3cRcrCRIpPrefixLenThe mask length of collecting prefix in configuration mode.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.2.1.9 |
h3cRcrCRRcrPolicyTableThis table contains objects to get statistic information of interfaces on a device. SEQUENCE OF H3cRcrCRRcrPolicyEntry .1.3.6.1.4.1.2011.10.2.48.2.2 |
h3cRcrCRRcrPolicyEntryEntry items H3cRcrCRRcrPolicyEntry .1.3.6.1.4.1.2011.10.2.48.2.2.1 |
h3cRcrCRRcrPlyIDThe ID of RCR policy which the user has configured. Integer32 .1.3.6.1.4.1.2011.10.2.48.2.2.1.1 |
h3cRcrCRRcrPlyMatchIPListNameThe matched IP prefix list name of RCR policy which the user has configured.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.48.2.2.1.2 |
h3cRcrCRRcrPlyMatchStudyEnableWhether the RCR policy which the user has configured is matched for studying prefix mode.rw Enumeration .1.3.6.1.4.1.2011.10.2.48.2.2.1.3 |
h3cRcrCRRcrPlyMatchOperPlyNameThe matched operation policy name of RCR policy which the user has configured.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.48.2.2.1.4 |
h3cRcrCRRcrAclNumberThe matched acl number of RCR operation policy which the user has configured.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.2.2.1.5 |
h3cRcrCRRcrPlyDelayTimeThe absolute maximum delay time. The range of values that can be configured is from 1 to 10000.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.2.2.1.6 |
h3cRcrCRRcrPlyLossRateThe packet loss percent of prefix which the CR concerns.rw Integer32 .1.3.6.1.4.1.2011.10.2.48.2.2.1.7 |
h3cRcrCRMatPrefixPerfTableThis table contains the matched prefix performance information. SEQUENCE OF H3cRcrCRMatPrefixPerfEntry .1.3.6.1.4.1.2011.10.2.48.2.3 |
h3cRcrCRMatPrefixPerfEntryEntry items H3cRcrCRMatPrefixPerfEntry .1.3.6.1.4.1.2011.10.2.48.2.3.1 |
h3cRcrCRMatPrefPerfAddrTypeThe destination IP addresses type of matched prefix which the CR wants (IPv4 or IPv6). InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.48.2.3.1.1 |
h3cRcrCRMatPrefPerfDestIPAddrThe destination IP address of matched prefix which the CR wants. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.48.2.3.1.2 |
h3cRcrCRMatPrefPerfDestMaskLenThe destination IP address mask length of matched prefix which the CR wants. Integer32 .1.3.6.1.4.1.2011.10.2.48.2.3.1.3 |
h3cRcrCRMatPrefPerfDelayTimeThe absolute maximum delay time of prefix which the CR has configured.ro Integer32 .1.3.6.1.4.1.2011.10.2.48.2.3.1.4 |
h3cRcrCRMatPrefPerfLossRateThe packet loss percent of prefix which the CR has configured.ro Integer32 .1.3.6.1.4.1.2011.10.2.48.2.3.1.5 |
h3cRcrCRMatPrefPerfThroughputThe bandwidth of prefix which the CR has monitored.ro Integer32 UNITS "kb" .1.3.6.1.4.1.2011.10.2.48.2.3.1.6 |
h3cRcrCRAdjustPrefixTableThis table contains objects to get adjusted prefix information which the CR controlled. SEQUENCE OF H3cRcrCRAdjustPrefixEntry .1.3.6.1.4.1.2011.10.2.48.2.4 |
h3cRcrCRAdjustPrefixEntryEntry items H3cRcrCRAdjustPrefixEntry .1.3.6.1.4.1.2011.10.2.48.2.4.1 |
h3cRcrCRAdjuPrefDestAddrTypeThe IP address type of the adjusted prefix which CR controlled (IPv4 or IPv6). InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.48.2.4.1.1 |
h3cRcrCRAdjuPrefDestAddrThe IP address of the adjusted prefix which CR controlled. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.48.2.4.1.2 |
h3cRcrCRAdjuPrefMaskLenThe IP address mask length of the adjusted prefix which CR controlled. Integer32 .1.3.6.1.4.1.2011.10.2.48.2.4.1.3 |
h3cRcrCRAdjuPrefPreMRNameThe name of the MR which the previous outbound traffic flows through. OCTET STRING .1.3.6.1.4.1.2011.10.2.48.2.4.1.4 |
h3cRcrCRAdjuPrefPreOutIfNameThe name of the external interface on the MR which the previous outbound traffic flows through. OCTET STRING .1.3.6.1.4.1.2011.10.2.48.2.4.1.5 |
h3cRcrCRAdjuPrefCurMRNameThe name of the MR which the current outbound traffic flows through.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.48.2.4.1.6 |
h3cRcrCRAdjuPrefCurOutIfNameThe name of the external interface on the MR which the current outbound traffic flows through.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.48.2.4.1.7 |
h3cRcrCRAdjuPrefPersistTimeThe persisting time from the time which the adjusted outbound traffic has been adjusted by CR to now.ro Integer32 UNITS "second" .1.3.6.1.4.1.2011.10.2.48.2.4.1.8 |
h3cRcrCRAdjuPrefAgeTimeThe time which the adjusted prefix remains.ro Integer32 UNITS "second" .1.3.6.1.4.1.2011.10.2.48.2.4.1.9 |