H3C-IF-EXT-MIB
This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information.
Main OID:
h3cIfExt.1.3.6.1.4.1.2011.10.2.40
70
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
h3cIfExtThis MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.40 |
h3cIfExtScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.1 |
h3cIfStatGlobalFlowIntervalSampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.2011.10.2.40.1.1 |
h3cIfExtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.2 |
h3cIfStat OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.2.1 |
h3cIfStatScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.2.1.1 |
h3cIfStatTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.2.1.2 |
h3cIfFlowStatTableThis table contains objects to get statistic information of interfaces on a device. SEQUENCE OF H3cIfStatEntry .1.3.6.1.4.1.2011.10.2.40.2.1.2.1 |
h3cIfStatEntryEntry items H3cIfStatEntry .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1 |
h3cIfStatFlowIntervalSampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.1 |
h3cIfStatFlowInBitsIn bits in the specific interval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.2 |
h3cIfStatFlowOutBitsOut bits in specific interval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.3 |
h3cIfStatFlowInPktsIn Packets in the specific interval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.4 |
h3cIfStatFlowOutPktsOut packets in the specific interval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.5 |
h3cIfStatFlowInBytesIn bytes in the specific interval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.6 |
h3cIfStatFlowOutBytesOut bytes in the specific interval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.7 |
h3cIfSpeedStatTableThis table contains objects to get average speed information in the specific interval of interfaces on a device. SEQUENCE OF H3cIfSpeedStatEntry .1.3.6.1.4.1.2011.10.2.40.2.1.2.2 |
h3cIfSpeedStatEntryEntry items H3cIfSpeedStatEntry .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1 |
h3cIfSpeedStatIntervalSampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.1 |
h3cIfSpeedStatInPktsAverage of input packets per second in the specific interval by h3cIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.2 |
h3cIfSpeedStatOutPktsAverage of output packets per second in the specific interval by h3cIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.3 |
h3cIfSpeedStatInBytesAverage of input bytes per second in the specific interval by h3cIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.4 |
h3cIfSpeedStatOutBytesAverage of output bytes per second in the specific interval by h3cIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.5 |
h3cIfHCFlowStatTableThis table contains objects to get statistic information of interfaces on a device. SEQUENCE OF H3cIfHCFlowStatEntry .1.3.6.1.4.1.2011.10.2.40.2.1.2.3 |
h3cIfHCFlowStatEntryEntry items H3cIfHCFlowStatEntry .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1 |
h3cIfStatFlowHCInBitsIn bits in the specific interval. This object is a 64-bit version of h3cIfStatFlowInBits.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.1 |
h3cIfStatFlowHCOutBitsOut bits in specific interval. This object is a 64-bit version of h3cIfStatFlowOutBits.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.2 |
h3cIfStatFlowHCInPktsIn Packets in the specific interval. This object is a 64-bit version of h3cIfStatFlowInPkts.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.3 |
h3cIfStatFlowHCOutPktsOut packets in the specific interval. This object is a 64-bit version of h3cIfStatFlowOutPkts.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.4 |
h3cIfStatFlowHCInBytesIn bytes in the specific interval. This object is a 64-bit version of h3cIfStatFlowInBytes.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.5 |
h3cIfStatFlowHCOutBytesOut bytes in the specific interval. This object is a 64-bit version of h3cIfStatFlowOutBytes.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.6 |
h3cIfControl OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.2.2 |
h3cRTParentIfTableThis table contains all interfaces that can create sub interface. SEQUENCE OF H3cRTParentIfEntry .1.3.6.1.4.1.2011.10.2.40.2.2.1 |
h3cRTParentIfEntryThis entry describes a interface that can create sub interface. H3cRTParentIfEntry .1.3.6.1.4.1.2011.10.2.40.2.2.1.1 |
h3cRTParentIfIndexThe index of interface that can creat sub interface. The value is the same as ifIndex value for this interface. Integer32 .1.3.6.1.4.1.2011.10.2.40.2.2.1.1.1 |
h3cRTMinSubIfOrdinalThe minimum ordinal of the sub interface can be created.ro Integer32 .1.3.6.1.4.1.2011.10.2.40.2.2.1.1.2 |
h3cRTMaxSubIfOrdinalThe max ordinal of the sub interface can be created.ro Integer32 .1.3.6.1.4.1.2011.10.2.40.2.2.1.1.3 |
h3cRTSubIfTableThis table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by h3cRTSubIfParentIfIndex and the h3cRTSubIfOrdinal must be in the range between h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent interface from h3cRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP. SEQUENCE OF H3cRTSubIfEntry .1.3.6.1.4.1.2011.10.2.40.2.2.2 |
h3cRTSubIfEntryThe h3cRTSubIfTable entry items H3cRTSubIfEntry .1.3.6.1.4.1.2011.10.2.40.2.2.2.1 |
h3cRTSubIfParentIfIndexThe parent interface index. The value should be the same as the h3cRTParentIfIndex. Integer32 .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.1 |
h3cRTSubIfOrdinalThe ordinal of sub interface. It should between h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent interface. Integer32 .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.2 |
h3cRTSubIfSubIfIndexThe ifIndex value of the sub interfacero Integer32 .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.3 |
h3cRTSubIfSubIfDescThe name of the interfacero DisplayString .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.4 |
h3cRTSubIfRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.5 |
h3cIfLinkModeTableThis table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode. SEQUENCE OF H3cIfLinkModeEntry .1.3.6.1.4.1.2011.10.2.40.2.2.3 |
h3cIfLinkModeEntryThe interface link mode table entry H3cIfLinkModeEntry .1.3.6.1.4.1.2011.10.2.40.2.2.3.1 |
h3cIfLinkModeIndexThe value is same as ifIndex. Integer32 .1.3.6.1.4.1.2011.10.2.40.2.2.3.1.1 |
h3cIfLinkModeThe current link mode of the interface If h3cIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface.rw Enumeration .1.3.6.1.4.1.2011.10.2.40.2.2.3.1.2 |
h3cIfLinkModeSwitchSupportWhether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.40.2.2.3.1.3 |
h3cIfInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.2.3 |
h3cIfPhysicalNumberRepresents the number of physical interfaces in the device.ro Integer32 .1.3.6.1.4.1.2011.10.2.40.2.3.1 |
h3cIfTableA list of interface entries. The number of entries is given by the value of IfNumber. SEQUENCE OF H3cIfEntry .1.3.6.1.4.1.2011.10.2.40.2.3.2 |
h3cIfEntryAn entry containing management information applicable to a particular interface. H3cIfEntry .1.3.6.1.4.1.2011.10.2.40.2.3.2.1 |
h3cIfUpDownTimesThe interface's up/down times, since the device was initialized.ro Integer32 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.1 |
h3cIfMtuThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.2 |
h3cIfBandwidthRateThe rate of the bandwidth for an interface.ro Integer32 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.3 |
h3cIfDiscardPktRateThe rate of the discarded packets for an interface.ro Integer32 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.4 |
h3cIfStatusKeepTimeThe time since the interface entered its current operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.5 |
h3cIfInNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.6 |
h3cIfOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address.ro Counter64 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.7 |
h3cIfIsPoeWhether the interface supports poe.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.8 |
h3cIfExtTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.3 |
h3cIfExtTrapPrex OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.3.0 |
h3cIfBandwidthUsageHighThe notification is generated when the rate of the bandwidth for the interface exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.40.3.0.1 |
h3cIfDiscardPktRateHighThe notification is generated when the rate of the discarded packets for the interface exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.40.3.0.2 |
h3cIfExtTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.40.3.1 |
h3cIfExtTrapCfgTableThe trap configuration table. SEQUENCE OF H3cIfExtTrapCfgEntry .1.3.6.1.4.1.2011.10.2.40.3.1.1 |
h3cIfExtTrapCfgEntryAn entry for this table. H3cIfExtTrapCfgEntry .1.3.6.1.4.1.2011.10.2.40.3.1.1.1 |
h3cIfBandwidthUpperLimitThe rate of the bandwidth upper limit for an interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.40.3.1.1.1.1 |
h3cIfDiscardPktRateUpperLimitThe rate of the discarded packets upper limit for an interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.40.3.1.1.1.2 |