H3C-MPM-MIB
Imported Objects
Objects
30 total| Object Name |
|---|
h3cMpmThe MPM (Multicast Port Management) MIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.51 |
h3cMPMObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.51.1 |
h3cMPortGroupLimitMinNumberThe lower limit of group-limit number.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.51.1.1 |
h3cMPortGroupLimitMaxNumberThe upper limit of group-limit number.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.51.1.2 |
h3cMPMTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.51.2 |
h3cMPortGroupJoinTableA table which is used for configuring a port in a specified VLAN to join a multicast group. SEQUENCE OF H3cMPortGroupJoinEntry .1.3.6.1.4.1.2011.10.2.51.2.1 |
h3cMPortGroupJoinEntryAn entry which is used for configuring a port in a specified VLAN to join a multicast group. H3cMPortGroupJoinEntry .1.3.6.1.4.1.2011.10.2.51.2.1.1 |
h3cMPortGroupJoinVlanIDAn index uniquely identifying a port in a specified VLAN which joined the multicast group. Integer32 .1.3.6.1.4.1.2011.10.2.51.2.1.1.1 |
h3cMPortGroupJoinAddressTypeType of the multicast IP address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.51.2.1.1.2 |
h3cMPortGroupJoinAddressIP address of the group which the port belongs to, and it must be a valid multicast IP address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.51.2.1.1.3 |
h3cMPortGroupJoinStatusThis object is responsible for managing the creation and deletion of rows, which supports 'active', 'notReady', 'createAndGo', 'destroy'. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the h3cMPortGroupJoinStatus column is 'notReady'. In particular, a newly created row cannot be actived until the port belongs to the corresponding VLAN and IGMP or IGMP snooping is enabled on that VLAN.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.51.2.1.1.4 |
h3cMPortGroupTableA table containing information about the status of a port which joined a multicast group in the VLAN. SEQUENCE OF H3cMPortGroupEntry .1.3.6.1.4.1.2011.10.2.51.2.2 |
h3cMPortGroupEntryAn entry containing information about the status of a port which joined a multicast group in the VLAN. H3cMPortGroupEntry .1.3.6.1.4.1.2011.10.2.51.2.2.1 |
h3cMPortGroupVlanIDAn index uniquely identifies that a port belongs to a specified VLAN. Integer32 .1.3.6.1.4.1.2011.10.2.51.2.2.1.1 |
h3cMPortGroupAddressTypeType of multicast IP address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.51.2.2.1.2 |
h3cMPortGroupAddressIP address of the group which the port joined, and it must be a valid multicast IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.51.2.2.1.3 |
h3cMPortConfigTableA table configuring the fast leave status, group limit number and group policy parameter on a port in the specified VLAN. SEQUENCE OF H3cMPortConfigEntry .1.3.6.1.4.1.2011.10.2.51.2.3 |
h3cMPortConfigEntryAn entry containing information about the fast leave status, group limit number and group policy parameter of a port in the specified VLAN. H3cMPortConfigEntry .1.3.6.1.4.1.2011.10.2.51.2.3.1 |
h3cMPortConfigVlanIDThe VLAN index. Integer32 .1.3.6.1.4.1.2011.10.2.51.2.3.1.1 |
h3cMPortGroupLimitNumberThe group limit number of the port.rw Unsigned32 .1.3.6.1.4.1.2011.10.2.51.2.3.1.2 |
h3cMPortFastLeaveStatusThe fast leave status of the port.rw EnabledStatus .1.3.6.1.4.1.2011.10.2.51.2.3.1.3 |
h3cMPortGroupPolicyParameterThe ACL number which is used as the group policy parameter of the port.rw Integer32(0|2000..2999) .1.3.6.1.4.1.2011.10.2.51.2.3.1.4 |
h3cMPortConfigRowStatusThe object is responsible for managing the creation and deletion of rows, which supports 'active', 'notReady', 'createAndGo' and 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.51.2.3.1.5 |
h3cMPortGroupLimitReplaceThis object is related to the object h3cMPortGroupLimitNumber. If the current IGMP group number is less than the value of h3cMPortGroupLimitNumber, any new IGMP group is permitted. If the current IGMP group number equals to the value of h3cMPortGroupLimitNumber and the value of this object is enabled, the group with the minimum multicast address will be replaced by the new group. If the current IGMP group number equals to the value of h3cMPortGroupLimitNumber and the value of this object is disabled, none of new group will be permitted.rw EnabledStatus .1.3.6.1.4.1.2011.10.2.51.2.3.1.6 |
h3cHostStaticJoinTableA table used to configure a host on a port in a specified VLAN statically to join a multicast group. SEQUENCE OF H3cHostStaticJoinEntry .1.3.6.1.4.1.2011.10.2.51.2.4 |
h3cHostStaticJoinEntryAn entry used to configure a host on a port in a specified VLAN statically to join a multicast group. H3cHostStaticJoinEntry .1.3.6.1.4.1.2011.10.2.51.2.4.1 |
h3cHostStaticJoinVlanIDAn index uniquely identify the specified VLAN in which a host on a port statically joined the multicast group. Integer32 .1.3.6.1.4.1.2011.10.2.51.2.4.1.1 |
h3cHostStaticJoinAddressTypeType of the multicast IP address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.51.2.4.1.2 |
h3cHostStaticJoinAddressIP address of the group which the host belongs to, and it must be a valid multicast IP address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.51.2.4.1.3 |
h3cHostStaticJoinStatusThis object is responsible for managing rows, which supports 'active', 'createAndGo' and 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.51.2.4.1.4 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.