H3C-IPSEC-MONITOR-V2-MIB
The MIB is designed to get statistic information of IPsec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.
Main OID:
h3cIPsecMonitorV2.1.3.6.1.4.1.2011.10.2.126
141
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
141 total| Object Name |
|---|
h3cIPsecMonitorV2The MIB is designed to get statistic information of IPsec tunnels.
With this MIB, we can get information of a certain tunnel or all
tunnels. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.126 |
h3cIPsecObjectsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.1 |
h3cIPsecScalarObjectsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.1.1 |
h3cIPsecMIBVersionVersion string of this MIB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.1.1 |
h3cIPsecTunnelV2TableThe IPsec Phase-2 Tunnel Table. There is one entry in this
table for each active IPsec Phase-2 Tunnel. SEQUENCE OF H3cIPsecTunnelV2Entry .1.3.6.1.4.1.2011.10.2.126.1.2 |
h3cIPsecTunnelV2EntryInformation about h3cIPsecTunnelV2Table. H3cIPsecTunnelV2Entry .1.3.6.1.4.1.2011.10.2.126.1.2.1 |
h3cIPsecTunIndexV2The index of IPsec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2147483647.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.1 |
h3cIPsecTunIfIndexV2The interface index( the ifIndex of ifTable ).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.10.2.126.1.2.1.2 |
h3cIPsecTunIKETunnelIndexV2The index of the associated IPsec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.3 |
h3cIPsecTunIKETunLocalIDTypeV2The type of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalType in the IKETunnelTable).ro H3cIPsecIDTypeV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.4 |
h3cIPsecTunIKETunLocalIDVal1V2The value of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable).
If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
used to identify the local peer.
If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is
the subnet address.
If the local peer type is ipv4AddrRange/ipv6AddrRange, this is
the beginning IP address of the range.
If the local peer type is fqdn/userFqdn, this is the host name
used to identify the local peer.
If the local peer type is derAsn1Dn, this is the binary DER
encoding of an ASN.1 X.500 Distinguished Name [X.501] of the
principal whose certificates are being exchanged to establish
the SA.
If the local peer type is derAsn1Gn, this is the binary DER
encoding of an ASN.1 X.500 GeneralName [X.509] of the principal
whose certificates are being exchanged to establish the SA.
If the local peer type is keyId, this is an opaque byte
stream which may be used to pass vendor-specific information
necessary to identify which pre-shared key should be used to
authenticate Aggressive mode negotiations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.2.1.5 |
h3cIPsecTunIKETunLocalIDVal2V2The second specification of the local peer's IP address for the
associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue2 in the
IKETunnelTable).
If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
is the subnet mask.
If the local peer type is ipv4AddrRange/ipv6AddrRange, this is
the ending IP address of the range.
If the local peer type is others, this is a zero-length string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.2.1.6 |
h3cIPsecTunIKETunRemoteIDTypeV2The type of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteType in the IKETunnelTable).ro H3cIPsecIDTypeV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.7 |
h3cIPsecTunIKETunRemoteIDVal1V2The value of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).
If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
used to identify the remote peer.
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is
the subnet address.
If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is
the beginning IP address of the range.
If the remote peer type is fqdn/userFqdn, this is the host name
used to identify the remote peer.
If the remote peer type is derAsn1Dn, this is the binary DER
encoding of an ASN.1 X.500 Distinguished Name [X.501] of the
principal whose certificates are being exchanged to establish
the SA.
If the remote peer type is derAsn1Gn, this is the binary DER
encoding of an ASN.1 X.500 GeneralName [X.509] of the principal
whose certificates are being exchanged to establish the SA.
If the remote peer type is keyId, this is an opaque byte
stream which may be used to pass vendor-specific information
necessary to identify which pre-shared key should be used to
authenticate Aggressive mode negotiations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.2.1.8 |
h3cIPsecTunIKETunRemoteIDVal2V2The second specification of the remote peer's IP address for the
associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the
IKETunnelTable).
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
is the subnet mask.
If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is
the ending IP address of the range.
If the remote peer type is others, this is a zero-length string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.2.1.9 |
h3cIPsecTunLocalAddrTypeV2The type of the IP address for the local peer of the IPsec Phase-2
Tunnel.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.2.1.10 |
h3cIPsecTunLocalAddrV2The IP address of the local peer for the IPsec Phase-2 Tunnel.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.2.1.11 |
h3cIPsecTunRemoteAddrTypeV2The type of the IP address for the remote peer of the IPsec Phase-2
Tunnel.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.2.1.12 |
h3cIPsecTunRemoteAddrV2The IP address of the remote peer for the IPsec Phase-2 Tunnel.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.2.1.13 |
h3cIPsecTunKeyTypeV2The key negotiate mode used by the IPsec Phase-2 Tunnel.ro H3cIPsecNegoTypeV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.14 |
h3cIPsecTunEncapModeV2The encapsulation mode used by the IPsec Phase-2 Tunnel.ro H3cIPsecEncapModeV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.15 |
h3cIPsecTunInitiatorV2The initiator of this IPsec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.ro Enumeration .1.3.6.1.4.1.2011.10.2.126.1.2.1.16 |
h3cIPsecTunLifeSizeV2The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
0 is defined as invalid value.ro Gauge32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.17 |
h3cIPsecTunLifeTimeV2The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.18 |
h3cIPsecTunRemainTimeV2The remain time of SA in seconds. 2147483647 is defined as invalid
value.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.19 |
h3cIPsecTunActiveTimeV2The duration the IPsec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.20 |
h3cIPsecTunRemainSizeV2The remain LifeSize of SA in kilobytes. 0 is defined as
invalid value.ro Gauge32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.21 |
h3cIPsecTunTotalRefreshesV2The total number of security association refreshing performed.ro Counter32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.22 |
h3cIPsecTunCurrentSaInstancesV2The number of security associations which are currently active
or expiring.ro Gauge32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.23 |
h3cIPsecTunInSaEncryptAlgoV2The encryption algorithm used by the inbound security association
of the IPsec Phase-2 Tunnel.ro H3cIPsecEncryptAlgoV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.24 |
h3cIPsecTunInSaAhAuthAlgoV2The authentication algorithm used by the inbound authentication
header (AH) security association of the IPsec Phase-2 Tunnel.ro H3cIPsecAuthAlgoV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.25 |
h3cIPsecTunInSaEspAuthAlgoV2The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPsec
Phase-2 Tunnel.ro H3cIPsecAuthAlgoV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.26 |
h3cIPsecTunDiffHellmanGrpV2The Diffie Hellman Group used by the security association of the
IPsec Phase-2 Tunnel.ro H3cIPsecDiffHellmanGrpV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.27 |
h3cIPsecTunOutSaEncryptAlgoV2The encryption algorithm used by the outbound security
association of the IPsec Phase-2 Tunnel.ro H3cIPsecEncryptAlgoV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.28 |
h3cIPsecTunOutSaAhAuthAlgoV2The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPsec Phase-2 Tunnel.ro H3cIPsecAuthAlgoV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.29 |
h3cIPsecTunOutSaEspAuthAlgoV2The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPsec
Phase-2 Tunnel.ro H3cIPsecAuthAlgoV2 .1.3.6.1.4.1.2011.10.2.126.1.2.1.30 |
h3cIPsecTunPolicyNameV2The policy name used by this IPsec tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.2.1.31 |
h3cIPsecTunPolicyNumV2The sequence number of policy used by this IPsec tunnel.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.2.1.32 |
h3cIPsecTunStatusV2The status of the IPsec Tunnel.ro Enumeration .1.3.6.1.4.1.2011.10.2.126.1.2.1.33 |
h3cIPsecTunnelStatV2TableThe IPsec Phase-2 Tunnel Statistics Table. SEQUENCE OF H3cIPsecTunnelStatV2Entry .1.3.6.1.4.1.2011.10.2.126.1.3 |
h3cIPsecTunnelStatV2EntryInformation about h3cIPsecTunnelStatV2Table. H3cIPsecTunnelStatV2Entry .1.3.6.1.4.1.2011.10.2.126.1.3.1 |
h3cIPsecTunInOctetsV2The total number of octets received by this IPsec Phase-2 Tunnel.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.1 |
h3cIPsecTunInDecompOctetsV2The total number of decompressed octets received by this IPsec
Phase-2 Tunnel. This value is accumulated AFTER the packet
is decompressed.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.2 |
h3cIPsecTunInPktsV2The total number of packets received by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.3 |
h3cIPsecTunInDropPktsV2The total number of packets dropped during receiving process
by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.4 |
h3cIPsecTunInReplayDropPktsV2The total number of packets dropped during
receiving process due to Anti-Replay process
by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.5 |
h3cIPsecTunInAuthFailsV2The total number of inbound authentication's
which ended in failure by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.6 |
h3cIPsecTunInDecryptFailsV2The total number of inbound decryption's
which ended in failure by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.7 |
h3cIPsecTunOutOctetsV2The total number of octets sent by this IPsec Phase-2 Tunnel.
This value is accumulated AFTER determining whether or not
the packet should be compressed.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.8 |
h3cIPsecTunOutUncompOctetsV2The total number of uncompressed octets sent by this IPsec Phase-2
Tunnel. This value is accumulated BEFORE the packet is compressed.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.9 |
h3cIPsecTunOutPktsV2The total number of packets sent by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.10 |
h3cIPsecTunOutDropPktsV2The total number of packets dropped during sending process
by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.11 |
h3cIPsecTunOutEncryptFailsV2The total number of outbound encryption's which ended in failure
by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.12 |
h3cIPsecTunNoMemoryDropPktsV2The total number of packets dropped due to no enough memory by this
IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.13 |
h3cIPsecTunQueueFullDropPktsV2The total number of packets dropped due to queue full by this
IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.14 |
h3cIPsecTunInvalidLenDropPktsV2The total number of packets dropped due to invalid length packet
by this IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.15 |
h3cIPsecTunTooLongDropPktsV2The total number of packets dropped due to too long packet by this
IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.16 |
h3cIPsecTunInvalidSaDropPktsV2The total number of packets dropped due to invalid SA by this
IPsec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.3.1.17 |
h3cIPsecSaV2TableThe IPsec Phase-2 Security Protection Index Table. This table
contains an entry for each active and expiring security association. SEQUENCE OF H3cIPsecSaV2Entry .1.3.6.1.4.1.2011.10.2.126.1.4 |
h3cIPsecSaV2EntryInformation about h3cIPsecSaV2Table. H3cIPsecSaV2Entry .1.3.6.1.4.1.2011.10.2.126.1.4.1 |
h3cIPsecSaIndexV2The number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPsec Phase-2 Tunnel. The value of this object will
wrap at 2,147,483,647.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.4.1.1 |
h3cIPsecSaDirectionV2The direction of the SA.ro Enumeration .1.3.6.1.4.1.2011.10.2.126.1.4.1.2 |
h3cIPsecSaSpiValueV2The value of the SPI.ro Unsigned32 .1.3.6.1.4.1.2011.10.2.126.1.4.1.3 |
h3cIPsecSaSecProtocolV2The security protocol of the SA.ro H3cIPsecSaProtocolV2 .1.3.6.1.4.1.2011.10.2.126.1.4.1.4 |
h3cIPsecSaEncryptAlgoV2The encryption algorithm used by the security association
of the IPsec Phase-2 Tunnel.ro H3cIPsecEncryptAlgoV2 .1.3.6.1.4.1.2011.10.2.126.1.4.1.5 |
h3cIPsecSaAuthAlgoV2The authentication algorithm used by the SA.ro H3cIPsecAuthAlgoV2 .1.3.6.1.4.1.2011.10.2.126.1.4.1.6 |
h3cIPsecSaStatusV2The status of the SA.ro Enumeration .1.3.6.1.4.1.2011.10.2.126.1.4.1.7 |
h3cIPsecTrafficV2TableThe IPsec Phase-2 Tunnel Traffic Table. SEQUENCE OF H3cIPsecTrafficV2Entry .1.3.6.1.4.1.2011.10.2.126.1.5 |
h3cIPsecTrafficV2EntryInformation about h3cIPsecTrafficV2Table. H3cIPsecTrafficV2Entry .1.3.6.1.4.1.2011.10.2.126.1.5.1 |
h3cIPsecTrafficLocalTypeV2The type of the local peer's traffic. Possible values are:
1) A single IP address
2) An IP address range
3) An IP subnetro H3cIPsecTrafficTypeV2 .1.3.6.1.4.1.2011.10.2.126.1.5.1.1 |
h3cIPsecTrafficLocalAddr1TypeV2The type of the first IP address specification for the local peer's
traffic.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.5.1.2 |
h3cIPsecTrafficLocalAddr1V2The first IP address specification of the local peer's traffic.
If the local peer's traffic type is single IP address, this is the
IP address.
If the local peer's traffic type is IP subnet, this is the subnet address.
If the local peer's traffic type is IP address range, this is the
beginning IP address of the range.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.5.1.3 |
h3cIPsecTrafficLocalAddr2TypeV2The type of the second IP address specification for the local peer's
traffic.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.5.1.4 |
h3cIPsecTrafficLocalAddr2V2The second IP address specification of the local peer's traffic.
If the local peer's traffic type is single IP address, this is the
IP address.
If the local peer's traffic type is IP subnet, this is the subnet mask.
If the local peer's traffic type is IP address range, this is the
ending IP address of the range.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.5.1.5 |
h3cIPsecTrafficLocalProtocol1V2The first protocol number specification of the local peer's traffic.
If the protocol type of the local peer's traffic is single protocol,
this is the protocol number.
If the protocol type of the local peer's traffic is protocol range,
this is the beginning protocol number of the range.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.6 |
h3cIPsecTrafficLocalProtocol2V2The second protocol number specification of the local peer's traffic.
If the protocol type of the local peer's traffic is single protocol,
this is the protocol number.
If the protocol type of the local peer's traffic is protocol range,
this is the ending protocol number of the range.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.7 |
h3cIPsecTrafficLocalPort1V2The first port number specification of the local peer's traffic.
If the port type of the local peer's traffic is single port, this is
the port number.
If the port type of the local peer's traffic is port range, this is
the beginning port number of the range.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.8 |
h3cIPsecTrafficLocalPort2V2The second port number specification of the local peer's traffic.
If the port type of the local peer's traffic is single port, this is
the port number.
If the port type of the local peer's traffic is port range, this is
the ending port number of the range.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.9 |
h3cIPsecTrafficRemoteTypeV2The type of the remote peer's traffic. Possible values are:
1) A single IP address
2) An IP address range
3) An IP subnetro H3cIPsecTrafficTypeV2 .1.3.6.1.4.1.2011.10.2.126.1.5.1.10 |
h3cIPsecTrafficRemAddr1TypeV2The type of the first IP address specification for the remote peer's
traffic.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.5.1.11 |
h3cIPsecTrafficRemAddr1V2The first IP address specification of the remote peer's traffic.
If the remote traffic type is single IP address, this is the IP address.
If the remote traffic type is IP subnet, this is the subnet address.
If the remote traffic type is IP address range, this is the beginning
IP address of the range.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.5.1.12 |
h3cIPsecTrafficRemAddr2TypeV2The type of the second IP address specification for the remote peer's
traffic.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.5.1.13 |
h3cIPsecTrafficRemAddr2V2The second IP address specification of the remote peer's traffic.
If the remote traffic type is single IP address, this is the IP address.
If the remote traffic type is IP subnet, this is the subnet mask.
If the remote traffic type is IP address range, this is the ending IP
address of the range.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.126.1.5.1.14 |
h3cIPsecTrafficRemoPro1V2The first protocol number specification of the remote peer's traffic.
If the protocol type of the remote peer's traffic is single protocol,
this is the protocol number.
If the protocol type of the remote peer's traffic is protocol range,
this is the beginning protocol number of the range.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.15 |
h3cIPsecTrafficRemoPro2V2The second protocol number specification of the remote peer's traffic.
If the protocol type of the remote peer's traffic is single protocol,
this is the protocol number.
If the protocol type of the remote peer's traffic is protocol range,
this is the ending protocol number of the range.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.16 |
h3cIPsecTrafficRemPort1V2The first port number specification of the remote peer's traffic.
If the port type of the remote peer's traffic is single port,
this is the port number.
If the port type of the remote peer's traffic is port range,
this is the beginning port number of the range.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.17 |
h3cIPsecTrafficRemPort2V2The second port number specification of the remote peer's traffic.
If the port type of the remote peer's traffic is single port,
this is the port number.
If the port type of the remote peer's traffic is port range,
this is the ending port number of the range.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.5.1.18 |
h3cIPsecGlobalStatsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.1.6 |
h3cIPsecGlobalActiveTunnelsV2The total number of currently active IPsec Phase-2 Tunnels.ro Gauge32 .1.3.6.1.4.1.2011.10.2.126.1.6.1 |
h3cIPsecGlobalActiveSasV2The total number of currently active or expiring IPsec Phase-2 SA.ro Gauge32 .1.3.6.1.4.1.2011.10.2.126.1.6.2 |
h3cIPsecGlobalInOctetsV2The total number of octets received by all current and previous
IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining
whether or not the packet should be decompressed.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.3 |
h3cIPsecGlobalInDecompOctetsV2The total number of decompressed octets received by all current
and previous IPsec Phase-2 Tunnels. This value is accumulated
AFTER the packet is decompressed.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.4 |
h3cIPsecGlobalInPktsV2The total number of packets received by all current and
previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.5 |
h3cIPsecGlobalInDropsV2The total number of packets dropped during receiving
process by all current and previous IPsec Phase-2
Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.6 |
h3cIPsecGlobalInReplayDropsV2The total number of packets dropped during receiving
process due to Anti-Replay process by all
current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.7 |
h3cIPsecGlobalInAuthFailsV2The total number of inbound authentication's which ended
in failure by all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.8 |
h3cIPsecGlobalInDecryptFailsV2The total number of inbound decryption's which ended in
failure by all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.9 |
h3cIPsecGlobalOutOctetsV2The total number of octets sent by all current and previous
IPsec Phase-2 Tunnels. This value is accumulated AFTER
determining whether or not the packet should be compressed.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.10 |
h3cIPsecGlobalOutUncompOctetsV2The total number of uncompressed octets sent by all current
and previous IPsec Phase-2 Tunnels. This value is accumulated
BEFORE the packet is compressed.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.11 |
h3cIPsecGlobalOutPktsV2The total number of packets sent by all current and previous
IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.12 |
h3cIPsecGlobalOutDropsV2The total number of packets dropped during sending process
by all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.13 |
h3cIPsecGlobalOutEncryptFailsV2The total number of outbound encryption's which ended in failure
by all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.14 |
h3cIPsecGlobalNoMemoryDropsV2The total number of packets dropped due to no enough memory
by all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.15 |
h3cIPsecGlobalNoFindSaDropsV2The total number of packets dropped due to not find SA by
all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.16 |
h3cIPsecGlobalQueueFullDropsV2The total number of packets dropped due to queue full by
all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.17 |
h3cIPsecGlobalInvalidLenDropsV2The total number of packets dropped due to invalid packet
length by all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.18 |
h3cIPsecGlobalTooLongDropsV2The total number of packets dropped due to too long packet by
all current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.19 |
h3cIPsecGlobalInvalidSaDropsV2The total number of packets dropped due to invalid SA by all
current and previous IPsec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.2011.10.2.126.1.6.20 |
h3cIPsecTrapObjectV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.1.7 |
h3cIPsecPolicyNameV2The IPsec policy name with a trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.7.1 |
h3cIPsecPolicySeqNumV2The IPsec policy sequence number with a trap.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.7.2 |
h3cIPsecPolicySizeV2The number of IPsec policies with a trap.ro Integer32 .1.3.6.1.4.1.2011.10.2.126.1.7.3 |
h3cIPsecTrapCntlV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.1.8 |
h3cIPsecTrapGlobalCntlV2Indicates whether all IPsec traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.1 |
h3cIPsecTunnelStartTrapCntlV2Indicates whether h3cIPsecTunnelStartV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.2 |
h3cIPsecTunnelStopTrapCntlV2Indicates whether h3cIPsecTunnelStopV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.3 |
h3cIPsecNoSaTrapCntlV2Indicates whether h3cIPsecNoSaFailureV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.4 |
h3cIPsecAuthFailureTrapCntlV2Indicates whether h3cIPsecAuthFailFailureV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.5 |
h3cIPsecEncryFailureTrapCntlV2Indicates whether h3cIPsecEncryFailFailureV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.6 |
h3cIPsecDecryFailureTrapCntlV2Indicates whether h3cIPsecDecryFailFailureV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.7 |
h3cIPsecInvalidSaTrapCntlV2Indicates whether h3cIPsecInvalidSaFailureV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.8 |
h3cIPsecPolicyAddTrapCntlV2Indicates whether h3cIPsecPolicyAddV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.9 |
h3cIPsecPolicyDelTrapCntlV2Indicates whether h3cIPsecPolicyDelV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.10 |
h3cIPsecPolicyAttachTrapCntlV2Indicates whether h3cIPsecPolicyAttachV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.11 |
h3cIPsecPolicyDetachTrapCntlV2Indicates whether h3cIPsecPolicyDetachV2 traps should be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.126.1.8.12 |
h3cIPsecTrapV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.1.9 |
h3cIPsecNotificationsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.1.9.0 |
h3cIPsecTunnelStartV2This notification is generated when an IPsec Phase-2
Tunnel is created. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.1 |
h3cIPsecTunnelStopV2This notification is generated when an IPsec Phase-2
Tunnel is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.2 |
h3cIPsecNoSaFailureV2This notification is generated when an IPsec Phase-2
non-existent SA error occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.3 |
h3cIPsecAuthFailFailureV2This notification is generated when the IPsec phase-2
authentication failure occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.4 |
h3cIPsecEncryFailFailureV2This notification is generated when the IPsec phase-2
tunnel has an encrypting failure. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.5 |
h3cIPsecDecryFailFailureV2This notification is generated when the IPsec phase-2
tunnel has a decrypting failure. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.6 |
h3cIPsecInvalidSaFailureV2This notification is generated when the IPsec phase-2
invalid SA failure occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.7 |
h3cIPsecPolicyAddV2This notification is generated when an IPsec policy is added. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.8 |
h3cIPsecPolicyDelV2This notification is generated when an IPsec policy is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.9 |
h3cIPsecPolicyAttachV2This notification is generated when an IPsec policy is attached
with one interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.10 |
h3cIPsecPolicyDetachV2This notification is generated when an IPsec policy is detached
with one interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.10.2.126.1.9.0.11 |
h3cIPsecConformanceV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.2 |
h3cIPsecCompliancesV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.2.1 |
h3cIPsecGroupsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.126.2.2 |