MIB Catalog
39 modules loaded — click any MIB to explore
Pdyn
39MIB module
This MIB module is a supplement to the ADSL-LINE-MIB and to the ADSL-LINE-EXT-MIB, the `standard` MIBs, where additional objects are needed to support ADSL modes or flavors not covered in the `standar
This MIB module defines a portion of the management information base (MIB) for managing configuration and monitoring results of SELT (Single Ended Line Test) tests over ADSL interfaces. At the time th
This MIB contains objects that are used to configure ARP entries and display ARP information. ================================================================= == == == Copyright (C) 2005 Paradyne Net
This MIB contains objects that are used for monitoring and controlling the ATM/Bridge Interworking Function.
This MIB Module extends the ATM-MIB defined in rfc2515
This MIB Module extends the ATM-FORUM-SNMP-M4-MI defined in the Atm Forums M4 Mib
This MIB Module supports ATM Statistics
This MIB module provides objects that extend the BRIDGE-MIB. ==================================================== == == == Copyright (C) 2005 Zhone Technologies, Inc == == == =========================
This MIB Module allow a user to reset a device in the DSLAM, as well as perform various operations related to the storage and retrieval of firmware and configuration files on devices.
This module defines a portion of the management information base (MIB) for managing multiple Loop Emulation Service (LES) Customer Premises Interworking Functions (CP-IWF). The mib recommended by the
This module contains objects that are used for monitoring and controlling CPIWF interfaces when terminating an IP Network. This enterprise mib is meant to be used in connection with RFC 2863 which def
MIB module
The Paradyne enterprise DS1/G.703 extension MIB. This MIB provides additional DS1 and G.703 (E1) configuration objects not provided by rfc2495.
This MIB Module extends the DS3-MIB defined in rfc2496
This MIB module defines a collection of objects for managing the bonding of multiple digital subscriber lines (DSL) to transport ATM streams. At the time this modules was defined, neither the IETF nor
This management information module supports the objects to be used for redundancy of entities.
This MIB module is a supplement to the ENTITY-SENSOR-MIB, RFC 3433.
The MIB module provides objects to manage an interface's High-level Data Link Control (HDLC) protocol.
The primary purpose of this MIB is to allow support of G.shdsl.bis based on the ITU Temporary Document, DC-R15, April 2003, until such a time as the `standard' MIB, HDSL2-SHDSL-LINE-MIB, RFC 3276, May
MIB module
This Mib is created to facilitate configuration of interface related objects.
This module provides objects pertaining to the management of an `Interface Device Interworking Function' (IfDev IWF). The following documents should be referenced with respect to this MIB module: [RFC
MIB module
This MIB module is a supplement to the IGMP-STD-MIB.
This MIB contains the objects pertaining to the configuration and maintenance of the Internet Group Management Protocol (IGMP) and IP Multicast related operation in Paradyne devices.
This management information module supports the objects to be used for fault management configuration on primary and secondary links.
The MIB module for configuration and management of IP interfaces/ports used for managing a DSLAM.
This management information module supports the objects that extend the Message Processing Dispatcher mib as described in rfc3412_std62_a.mib.
This MIB Module allows a user to reset a device in the DSLAM, as well as perform various operations related to the storage and retrieval of firmware and configuration files on devices.
The MIB module for configuring and managing multilink PPP. The following documents should be referenced with respect to this MIB: [PPP] Carlson, J, `PPP Design and Debugging', Addison-Wesley, December
The Paradyne enterprise ReachDSL MIB. This MIB is written specifically to facilitate in the management of ReachDSL devices as well as help in configuration of Spectrum Management specific objects for
MIB module
SFP is short for Small Form-Factor Pluggable (SFP) Transceiver. They plug into an SFP Compaitble Port and allow for compact Hardware design SFP modules contain an EEPROM containing information about t
MIB module
R.A.Bowhall The Paradyne enterprise SPECTRUM MIB. This MIB is written to facilitate spectrum management of any xDSL interfaces. This mib replaces older versions of the spectrum management including th
This MIB contains objects that are used for configuration and statistics reporting things that are unique to a stackable product.
1)Added pdnEntitySyslogTable to be used for entities 2)Added conformance statements.
MIB module