PDN-ATMM4EXT-MIB
AI MIB Summary
The PDN-ATMM4EXT-MIB module extends the ATM Forum M4 MIB to monitor and manage Asynchronous Transfer Mode (ATM) network parameters, specifically providing access to extended performance counters and configuration attributes for ATM Permanent Virtual Circuits (PVCs) and Switched Virtual Circuits (SVCs) on PDN-ATMM4 hardware. This extension facilitates granular visibility into ATM layer statistics, including cell loss, delay, and error rates, enabling precise fault isolation and capacity planning for ATM-based transport networks.
This MIB Module extends the ATM-FORUM-SNMP-M4-MI defined in the Atm Forums M4 Mib
Main OID:
pdnAtmfM4ExtMIB.1.3.6.1.4.1.1795.2.24.2.6.11.6
54
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
pdnAtmfM4ExtMIBThis MIB Module extends the ATM-FORUM-SNMP-M4-MI defined
in the Atm Forums M4 Mib MODULE-IDENTITY .1.3.6.1.4.1.1795.2.24.2.6.11.6 |
pdnAtmfM4ExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.1 |
pdnAtmfM4TcProtoCurrExtTableThe Paradyne Extension to the atmfM4TcProtoCurrTable of the
ATM-FORUM-SNMP-M4-MIB. SEQUENCE OF PdnAtmfM4TcProtoCurrExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1 |
pdnAtmfM4TcProtoCurrExtEntryThe Paradyne Extension to the atmfM4TcProtoCurrTable of the
ATM-FORUM-SNMP-M4-MIB. PdnAtmfM4TcProtoCurrExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1 |
pdnAtmfM4TcProtoCurrCellInsThe number of ATM cells received on this interface since the
start of this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.1 |
pdnAtmfM4TcProtoCurrCellOutsThe number of ATM cells sent on this interface since the
start of this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.2 |
pdnAtmfM4TcProtoCurrInDiscardsThe number of RX ATM cells dropped on this interface since the
start of this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.3 |
pdnAtmfM4TcProtoCurrOutDiscardsThe number of TX ATM cells dropped on this interface since the
start of this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.4 |
pdnAtmfM4TcProtoCurrLCDEventsThe number of Loss of Cell Delineation (LCD) event occurred
on this interface since the start of this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.5 |
pdnAtmfM4TcProtoCurrUnknownCellsThe number of unknown Cells received on this interface since
the start of this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.6 |
pdnAtmfM4TcProtoCurrCorrectedHECThe number of Cell with corrected HEC received on this interface
since the start of this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.7 |
pdnAtmfM4TcProtoHistExtTableThe Paradyne Extension to the atmfM4TcProtoHistTable of the
ATM-FORUM-SNMP-M4-MIB. SEQUENCE OF PdnAtmfM4TcProtoHistExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2 |
pdnAtmfM4TcProtoHistExtEntryThe Paradyne Extension to the atmfM4TcProtoHistTable of the
ATM-FORUM-SNMP-M4-MIB. PdnAtmfM4TcProtoHistExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1 |
pdnAtmfM4TcProtoHistCellInsThe number of ATM cells received on this interface
during this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.1 |
pdnAtmfM4TcProtoHistCellOutsThe number of ATM cells sent on this interface during
this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.2 |
pdnAtmfM4TcProtoHistInDiscardsThe number of RX ATM cells dropped on this interface
during this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.3 |
pdnAtmfM4TcProtoHistOutDiscardsThe number of TX ATM cells dropped on this interface
during this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.4 |
pdnAtmfM4TcProtoHistLCDEventsThe number of Loss of Cell Delineation (LCD) event occurred
on this interface during this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.5 |
pdnAtmfM4TcProtoHistUnknownCellsThe number of unknown Cells received on this interface since
the start of this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.6 |
pdnAtmfM4TcProtoHistCorrectedHECThe number of Cell with corrected HEC received on this interface
during this intervalro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.7 |
pdnAtmfM4TestTypes OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3 |
pdnAtmfM4TestOAMLoopbackSegMultiCellThis identifies an OAM Loopback Test on a VPL, VPC,
VCL, or VCC termination point, using a segment OAM
cell.
The test type must have appended to it a code that uniquely
identifies an intermediate point responsible for looping
back the cell. If this is absent, the loopback is performed
at the end of the segment or connection.
E.g., the OID { pdnAtmfM4TestOAMLoopbackSegMultiCell 5 } identifies
that the loopback should be performed at the intermediate
point labeled 5. OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3.1 |
pdnAtmfM4TestOAMLoopbackE2EMultiCellThis identifies an OAM Loopback Test on a VPL, VPC,
VCL, or VCC termination point, using an end-to-end OAM
cell. OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3.2 |
pdnAtmfM4VcLoopbackTestTableThis table contains input and results for OAM loopback
tests. There can be only one test running per ATM VCC
This table should be used in conjunction with atmfM4VcTestTable
with all the semantics of atmfM4VcTestTable. SEQUENCE OF PdnAtmfM4VcLoopbackTestEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4 |
pdnAtmfM4VcLoopbackTestEntryAn entry containing objects for test results
for ATM OAM loopback test PdnAtmfM4VcLoopbackTestEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1 |
pdnAtmfM4VcLoopbackTestElpsTimeThis object contains the time that has elapsed since the test started.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.1 |
pdnAtmfM4VcLoopbackTestCellsSentThis object specifies a count of the number of test cells that
have been sent. The value of this object stops increasing
when it reaches its maximum value.ro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.2 |
pdnAtmfM4VcLoopbackTestCellsRcvdThis object specifies a count of the number of test cells that
have been received. The value of this object stops increasing
when it reaches its maximum value.ro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.3 |
pdnAtmfM4VcLoopbackTestMinRTDelayThis object contains the value of the shortest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.4 |
pdnAtmfM4VcLoopbackTestMaxRTDelayThis object contains the value of the longest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.5 |
pdnAtmfM4VcLoopbackTestAvgRTDelayThis object contains the value of the average round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.6 |
pdnAtmfM4VcLoopbackTestErrorCodeThis object contains the specific error code on the test result.ro PdnAtmfM4TestErrorCode .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.7 |
pdnAtmfM4Vc1CellLoopTableThis table contains input and results for single cell OAM
loopback tests. There can be only one test running per ATM VCC
This table should be used in conjunction with atmfM4VcTestTable
with all the semantics of atmfM4VcTestTable. SEQUENCE OF PdnAtmfM4Vc1CellLoopEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5 |
pdnAtmfM4Vc1CellLoopEntryAn entry containing objects for test results
for a single cell ATM OAM loopback test PdnAtmfM4Vc1CellLoopEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1 |
pdnAtmfM4Vc1CellLoopRTDelayThis object contains the value of the round trip delay of the
the test cell. A value of zero indicates that no cell has been
received.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.1 |
pdnAtmfM4Vc1CellLoopReportedLocationThis object contains the value of the location identifier
reported by the received cell.ro OCTET STRING .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.2 |
pdnAtmfM4Vc1CellLoopErrorCodeThis object contains the specific error code on the test result.ro PdnAtmfM4TestErrorCode .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.3 |
pdnAtmfM4LoopbackLocationTableThis table contains the ATM OAM loopback location codes
for ATM cell layer interfaces. SEQUENCE OF PdnAtmfM4LoopbackLocationEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6 |
pdnAtmfM4LoopbackLocationEntryAn entry containing objects for ATM OAM loopback locations. PdnAtmfM4LoopbackLocationEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1 |
pdnAtmfM4LoopbackLocationCodeThis object contains the value of ATM OAM Loopback Location Coderw OCTET STRING .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1.1 |
pdnAtmfM4VpLoopbackTestTableThis table contains input and results for OAM loopback
tests. There can be only one test running per ATM VPC
This table should be used in conjunction with atmfM4VpTestTable
with all the semantics of atmfM4VpTestTable. SEQUENCE OF PdnAtmfM4VpLoopbackTestEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7 |
pdnAtmfM4VpLoopbackTestEntryAn entry containing objects for test results
for ATM OAM loopback test PdnAtmfM4VpLoopbackTestEntry .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1 |
pdnAtmfM4VpLoopbackTestElpsTimeThis object contains the time that has elapsed since the test started.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.1 |
pdnAtmfM4VpLoopbackTestCellsSentThis object specifies a count of the number of test cells that
have been sent. The value of this object stops increasing
when it reaches its maximum value.ro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.2 |
pdnAtmfM4VpLoopbackTestCellsRcvdThis object specifies a count of the number of test cells that
have been received. The value of this object stops increasing
when it reaches its maximum value.ro Gauge32 .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.3 |
pdnAtmfM4VpLoopbackTestMinRTDelayThis object contains the value of the shortest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.4 |
pdnAtmfM4VpLoopbackTestMaxRTDelayThis object contains the value of the longest round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.5 |
pdnAtmfM4VpLoopbackTestAvgRTDelayThis object contains the value of the average round trip delay
since the test has been started. It is calculated only on the cells
that have been received. Cells that were dropped are not counted.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.6 |
pdnAtmfM4VpLoopbackTestErrorCodeThis object contains the specific error code on the test result.ro PdnAtmfM4TestErrorCode .1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.7 |
pdnAtmfM4ExtTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.2 |
pdnAtmfM4ExtTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.2.0 |
pdnAtmfM4ExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.3 |
pdnAtmfM4Groups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1 |
pdnAtmfM4Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.6.3.2 |