HOTWIRE-MSDSL-INTERFACE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HOTWIRE-MSDSL-INTERFACE-MIB.
134
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
134 total| Object Name |
|---|
msdslDevice OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1795.2.24.2.6.15.1 |
msdslMarginLowThis trap signifies that the margin estimate
is below a customer set threshold value. This is a trap
of 'minor' class. TRAP-TYPE .1.3.6.1.4.1.1795.2.24.2.6.15.1.0.3 |
msdslErrorRateHighThis trap signifies that the error rate estimates
is above a customer set threshold value. This is a trap
of 'minor' class. TRAP-TYPE .1.3.6.1.4.1.1795.2.24.2.6.15.1.0.4 |
msdslNTUTypeMismatchThe LTU configured does NOT match with the NTU connected
to the DSL port indicated by the ifIndex. TRAP-TYPE .1.3.6.1.4.1.1795.2.24.2.6.15.1.0.7 |
msdslMarginNormalThis trap signifies that the margin estimate has gone
above a customer set threshold value. this is a trap
of 'minor' class. this trap compliments the xdslMarginLow
trap TRAP-TYPE .1.3.6.1.4.1.1795.2.24.2.6.15.1.0.103 |
msdslErrorRateNormalThis trap signifies that the error rate estimates
gone below a customer set threshold value. This is a trap
of 'minor' class. This trap compliments the xdslErrorRateHigh
trap. TRAP-TYPE .1.3.6.1.4.1.1795.2.24.2.6.15.1.0.104 |
msdslTestOverThis trap signifies that the test has completed on one of the
ports. This trap compliments the xdslTestStart trap. TRAP-TYPE .1.3.6.1.4.1.1795.2.24.2.6.15.1.0.106 |
msdslCurrent OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.1 |
msdslCurrentTableThe MSDSL Current 15 minute interval table. SEQUENCE OF MsdslCurrentEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1 |
msdslCurrentEntryAn entry in the MSDSL Current table. MsdslCurrentEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1 |
msdslCurrentIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.1 |
msdslCurrentESsThe number of Errored Seconds, encountered by
a MSDSL interface in the current 15 minute inter-
val.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.2 |
msdslCurrentSESsThe number of Severely Errored Seconds encoun-
tered by a msdsl interface in the current 15
minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.3 |
msdslCurrentFEBEsThe number of Far End Block Errors (FEBE) en-
countered by a MSDSL interface in the current 15
minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.4 |
msdslErrEventsCounterAn error event is a CRC error, maximum count
is 65,535. If the count reaches 65,535 it will
remain at that value until reset. Reset is when
the near end data is cleared.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.5 |
msdslErrTimeElapsedThe number of seconds that have elapsed since
the beginning of the current error-measurment
period.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.6 |
msdslErrValidIntervalsThe number of previous intervals for which
valid data was collected. The value will be 96
unless the interface was brought on-line within
the last 24 hours, in which case the value will
be the number of complete 15 minute intervals
since the interface has been online.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.7 |
msdslInterval OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.2 |
msdslIntervalTableAn MSDSL Interval table. SEQUENCE OF MsdslIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2 |
msdslIntervalEntryAn entry in the MSDSL Interval table. MsdslIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1 |
msdslIntervalIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.1 |
msdslIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.2 |
msdslIntervalESsThe number of Errored Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.3 |
msdslIntervalSESsThe number of Severely Errored Seconds encoun-
tered by a DSL interface in one of the previous
96, individual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.4 |
msdslIntervalFEBEsThe number of Far End Block Errors
encountered by a MSDSL interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.5 |
msdslWorstInterval OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.3 |
msdslWorstIntervalTableThe MSDSL Worst Interval table. SEQUENCE OF MsdslWorstIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3 |
msdslWorstIntervalEntryAn entry in the msdsl Worst Interval table. MsdslWorstIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1 |
msdslWorstIntervalIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.1 |
msdslWorstIntervalESsThe value (1 to 96) indicating the interval
containing the worst Errored Seconds encountered
by a DSL interface.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.2 |
msdslWorstIntervalSESsThe value (1 to 96) indicating the interval
containing the worst Errored Seconds encountered
by a DSL interface.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.3 |
msdslWorstIntervalFEBEsThe value (1 to 96) indicating the interval
containing the worst Errored Seconds encountered
by a DSL interface.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.4 |
msdslTotal OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.4 |
msdslTotalTableThe DSL Total table. 24 hour interval. SEQUENCE OF MsdslTotalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4 |
msdslTotalEntryAn entry in the DSL Total table. MsdslTotalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1 |
msdslTotalIfIndexThe index value which uniquely identifies the
DSL interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a msdslLineIfIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.1 |
msdslTotalESsThe number of Errored Seconds encountered by a
DSL interface in the previous 24 hour intervalro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.2 |
msdslTotalSESsThe number of Severely Errored Seconds encoun-
tered by a DSL interface in the previous 24
hour interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.3 |
msdslTotalFEBEsThe number of Far End Block Errors ( FEBE)
encountered by a DSL interface in the previous
24 hour interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.4 |
msdslFarEndCurrent OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.5 |
msdslFarEndCurrentTableThe MSDSL Current table. SEQUENCE OF MsdslFarEndCurrentEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5 |
msdslFarEndCurrentEntryAn entry in the MSDSL Current table. MsdslFarEndCurrentEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1 |
msdslFarEndCurrentIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.1 |
msdslFarEndCurrentESsThe number of Errored Seconds, encountered by
a MSDSL interface in the current 15 minute inter-
val.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.2 |
msdslFarEndCurrentSESsThe number of Severely Errored Seconds encoun-
tered by a msdsl interface in the current 15
minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.3 |
msdslFarEndCurrentFEBEsThe number of Far End Block Errors (FEBE) en-
countered by a MSDSL interface in the current 15
minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.4 |
msdslFarEndInterval OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.6 |
msdslFarEndIntervalTableThe MSDSL Far End Interval table. SEQUENCE OF MsdslFarEndIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6 |
msdslFarEndIntervalEntryAn entry in the msdsl Interval table. MsdslFarEndIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1 |
msdslFarEndIntervalIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.1 |
msdslFarEndIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.2 |
msdslFarEndIntervalESsThe number of Errored Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.3 |
msdslFarEndIntervalSESsThe number of Severely Errored Seconds encoun-
tered by a DSL interface in one of the previous
96, individual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.4 |
msdslFarEndIntervalFEBEsThe number of Far End Block Errors
encountered by a MSDSL interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.5 |
msdslFarEndWorstInterval OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.7 |
msdslFarEndWorstIntervalTableThe MSDSL Far End Interval table. SEQUENCE OF MsdslFarEndWorstIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7 |
msdslFarEndWorstIntervalEntryAn entry in the msdsl Worst Interval table. MsdslFarEndWorstIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1 |
msdslFarEndWorstIntervalIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.1 |
msdslFarEndWorstIntervalESsThe number of Far End Block Errors
encountered by a MSDSL interface in one of the
previous 96, individual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.2 |
msdslFarEndWorstIntervalSESsThe value (1 to 96) indicating the interval
containing the worst Errored Seconds encountered
by a DSL interface.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.3 |
msdslFarEndWorstIntervalFEBEsThe value (1 to 96) indicating the interval
containing the worst Errored Seconds encountered
by a DSL interface.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.4 |
msdslFarEndTotal OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.8 |
msdslFarEndTotalTableThe DSL Total table. 24 hour interval. SEQUENCE OF MsdslFarEndTotalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8 |
msdslFarEndTotalEntryAn entry in the DSL Total table. MsdslFarEndTotalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1 |
msdslFarEndTotalIfIndexThe index value which uniquely identifies the
DSL interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a msdslLineIfIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.1 |
msdslFarEndTotalESsThe number of Errored Seconds encountered by a
DSL interface in the previous 24 hour intervalro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.2 |
msdslFarEndTotalSESsThe number of Severely Errored Seconds encoun-
tered by a DSL interface in the previous 24
hour interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.3 |
msdslFarEndTotalFEBEsThe number of Far End Block Errors ( FEBE)
encountered by a DSL interface in the previous
24 hour interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.4 |
msdslCurrentPerf OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.9 |
msdslCurrentPerfTableThe MSDSL Current Peformance Statistics table. SEQUENCE OF MsdslCurrentPerfEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9 |
msdslCurrentPerfEntryAn entry in the MSDSL Current performance table. MsdslCurrentPerfEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1 |
msdslCurrentPerfIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.1 |
msdslCurrentPerfMarginThe average Margin value for the current
15 minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.2 |
msdslCurrentPerfTxPwrThe average value of the Transmit power
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.3 |
msdslCurrentPerfRxGainThe average value of the Receiver gain the current
15 minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.4 |
msdslPerfPayloadRateAn estimate of the interface's current bandwidth in
bits per second. Current range is: 64k to 2048k.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.5 |
msdslTimeElapsedThe number of seconds that have elapsed since
the beginning of the current error-measurment
period.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.6 |
msdslValidIntervalsThe number of previous intervals for which
valid data was collected. The value will be 96
unless the interface was brought on-line within
the last 24 hours, in which case the value will
be the number of complete 15 minute intervals
since the interface has been online.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.7 |
msdslIntervalPerf OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.10 |
msdslIntervalPerfTableThe MSDSL Interval table. SEQUENCE OF MsdslIntervalPerfEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10 |
msdslIntervalPerfEntryAn entry in the msdsl Interval performance table. MsdslIntervalPerfEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1 |
msdslIntervalPerfIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.1 |
msdslIntervalPerfNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.2 |
msdslIntervalPerfMarginThe average Margin for a DSL interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.3 |
msdslIntervalPerfTxPwrThe average Transmit Power on a DSL interface in one
of the previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.4 |
msdslIntervalPerfRxGainThe average RxGain on a DSL interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.5 |
msdslFarEndCurrentPerf OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.11 |
msdslFarEndCurrentPerfTableThe MSDSL Current Peformance Statistics table. SEQUENCE OF MsdslFarEndCurrentPerfEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11 |
msdslFarEndCurrentPerfEntryAn entry in the MSDSL Current performance table. MsdslFarEndCurrentPerfEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1 |
msdslFarEndCurrentPerfIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.1 |
msdslFarEndCurrentPerfMarginThe average Margin value for the current
15 minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.2 |
msdslFarEndCurrentPerfTxPwrThe average value of the Transmit power
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.3 |
msdslFarEndCurrentPerfRxGainThe average value of the Receiver gain the current
15 minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.4 |
msdslFarEndIntervalPerf OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.12 |
msdslFarEndIntervalPerfTableThe MSDSL Interval table. SEQUENCE OF MsdslFarEndIntervalPerfEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12 |
msdslFarEndIntervalPerfEntryAn entry in the msdsl Interval performance table. MsdslFarEndIntervalPerfEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1 |
msdslFarEndIntervalPerfIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.1 |
msdslFarEndIntervalPerfNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.2 |
msdslFarEndIntervalPerfMarginThe average Margin value for the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.3 |
msdslFarEndIntervalPerfTxPwrThe average value of the Transmit power in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.4 |
msdslFarEndIntervalPerfRxGainThe average value of the Receiver gain the current 15
minute interval.ro Gauge .1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.5 |
msdsldsx1WorstInterval OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.13 |
msdsldsx1WorstIntervalTableThe MSDSL DSX1 Worst Interval table. SEQUENCE OF Msdsldsx1WorstIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13 |
msdsldsx1WorstIntervalEntryAn entry in the msdsl DSX1 Worst Interval table. Msdsldsx1WorstIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1 |
msdsldsx1WorstIntervalIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.1 |
msdsldsx1WorstIntervalESsThe number of Errored Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.2 |
msdsldsx1WorstIntervalUASsThe number of Unavailable Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.3 |
msdsldsx1WorstIntervalSESsThe number of Severely Errored Seconds encoun-
tered by a DSL interface in one of the previous
96, individual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.4 |
msdsldsx1WorstIntervalBESsThe number of Bursty Errored Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.5 |
msdsldsx1WorstIntervalCSSsThe number of Controlled Slip Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.6 |
msdsldsx1WorstIntervalLOFCThe number of Loss of Frame Counts encountered
by a MSDSL interface in one of the previous 96,
individual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.7 |
msdslG703WorstInterval OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.14 |
msdslG703WorstIntervalTableThe MSDSL G.703 Worst Interval table. SEQUENCE OF MsdslG703WorstIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14 |
msdslG703WorstIntervalEntryAn entry in the msdsl G.703 Worst Interval table. MsdslG703WorstIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1 |
msdslG703WorstIntervalIfIndexThe index value which uniquely identifies the
MSDSL interface to which this entry is applica-
ble.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.1 |
msdslG703WorstIntervalESsThe number of Errored Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.2 |
msdslG703WorstIntervalUASsThe number of Unavailable Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.3 |
msdslG703WorstIntervalSESsThe number of Severely Errored Seconds encoun-
tered by a DSL interface in one of the previous
96, individual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.4 |
msdslG703WorstIntervalBESsThe number of Bursty Errored Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.5 |
msdslG703WorstIntervalCSSsThe number of Controlled Slip Seconds encountered by a
DSL interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.6 |
msdslG703WorstIntervalLOFCThe number of Loss of Frame Counts encountered
by a MSDSL interface in one of the previous 96,
individual 15 minute, intervals.ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.7 |
msdslConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.15.1.15 |
msdslFracTableThe Paradyne MSDSL Cross Connect Table. SEQUENCE OF MsdslFracEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28 |
msdslFracEntryAn entry in the Paradyne MSDSL Cross Connect Table. MsdslFracEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1 |
msdslFracPortIndexThe index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as identified
by the same value of ifIndex from the Interfaces
table of MIB II (RFC 1213).ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.1 |
msdslFracPortTSThe Time Slot number associated with the interface
identified by msdslFracPortIndex for this entry.
If the allocation method is ds1ByPass then this
object is not required since the whole port specified by
msdslFracPortIndex will be assigned to the corresponding
msdslFracPortIfIndex.
If the allocation method is ds1CrossConn then this object
is also not required since the whole port specified by
msdslFracPortIndex will be assigned to the port specified
by msdslFracPortIfIndex.
If the allocation method is ds0CrossConn, then this object
specifies the Time Slot associated with the interface
identified by msdslFracPortIndex for this entry.rw INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2 |
msdslFracPortIfIndexAn index value that uniquely identifies the interface to
which this entry is mapped. The interface identified by
a particular value of this index is the same interface as
identified by the same value of an ifIndex object instance
If no interface is currently using the Time Slot identified
by msdslFracPortTS, then this value should be zero. This is
used to unassign the Time Slot.
If a single interface occupies more than one time slot,
then its ifIndex value is found in multiple time slots
(i.e., there are multiple entries in table with the same
msdslFracPortIfIndex value).rw INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3 |
msdslFracPortIfTSThe Time Slot associated with the interface
identified by msdslFracPortIfIndex for this entry.
If the allocation method is ds1ByPass then this object
is not required since the whole port specified by
msdslFracPortIndex will be assigned to the corresponding
msdslFracPortIfIndex.
If the allocation method is ds1CrossConn then this object
is also not required since the whole port specified by
msdslFracPortIndex will be assigned to the port specified by
msdslFracPortIfIndex.
If the allocation method is ds0CrossConn, then this object
specifies the Time Slot associated with the interface
identified by msdslFracPortIfIndex for this entry.rw INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.4 |
msdslFracPortVoiceDataThe Current mode for this DS0.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.5 |
msdslPortConfigAllocMethodTableThe Paradyne MSDSL Cross Connect Allocation Method Table. SEQUENCE OF MsdslPortConfigAllocMethodEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29 |
msdslPortConfigAllocMethodEntryAn entry in the Paradyne MSDSL Cross Connect Table
Allocation Method MsdslPortConfigAllocMethodEntry .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1 |
msdslPortConfigAllocMethodIfIndexThe index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as
identified by the same value of ifIndex from
the Interfaces table of MIB II (RFC 1213).ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.1 |
msdslPortConfigAllocMethodThe Current allocation method for this device.
Where:
ds1ByPass:
In this mode the entire WAN interface
is connected directly to the DSL interface.
This connection provides minimal delay.
Changing to this allocation method will
automatically do the following assignments:
WAN port 1 >>> DSL Port 1
WAN port 2 >>> DSL Port 2
WAN port 3 >>> DSL Port 3
WAN port 4 >>> DSL Port 4
WAN port 5 >>> DSL Port 5
WAN port 6 >>> DSL Port 6
WAN port 7 >>> DSL Port 7
WAN port 8 >>> DSL Port 8
ds1CrossConn:
In this mode the individual WAN ports may
be connected to individual DSL ports through
the cross connect circuitry. This connection
must use the System Clock for the timing
source. Changing to this allocation method will
unassign all the time slots for this interface
and any time slots to the connected interface.
For example:
WAN port 1 >>> DSL Port 8
WAN port 2 >>> DSL Port 7
WAN port 3 >>> DSL Port 6
WAN port 4 >>> DSL Port 5
WAN port 5 >>> DSL Port 1
WAN port 6 >>> DSL Port 2
WAN port 7 >>> Not Assigned
WAN port 8 >>> WAN Port 7
ds0CrossConn:
This mode assigns individual time slots. Any
timeslot from any WAN interface may be
connected to any timeslot of any DSL interface.
Changing to this allocation method will unassign
all the time slots for this interface and any
time slots to the connected interface.
notAssigned:
This indicates that this interface is not assigned.
Changing to this allocation method will unassign
all the time slots for this interface and any
time slots to the connected interface.
disabled:
This is a Read Only value indicating that the
interface is disabled.
NOTE: Going from one mode to another mode will unassign
all the time slots for that interface and the
interface it was connected to.
The only exception being ds1ByPass mode. When
going from any mode to ds1ByPass, all the Time
Slots will be assigned Network port to WAN port.
These assignments, however, do not use the cross
connect circuitry.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.2 |