PDN-HDSL2-SHDSL-LINE-MIB
AI MIB Summary
The PDN-HDSL2-SHDSL-LINE-MIB monitors and manages Paradyne G.shdsl.bis and SHDSL transceiver line parameters, including physical layer statistics and session states, to bridge the gap between the ITU-T G.991.2 standard and the RFC 3276 specification. This module specifically tracks enterprise-specific SHDSL objects and temporary document-based attributes for single-pair high-speed digital subscriber line transceivers.
The primary purpose of this MIB is to allow support of G.shdsl.bis based on the ITU Temporary Document, DC-R15, April 2003, until such a time as the `standard' MIB, HDSL2-SHDSL-LINE-MIB, RFC 3276, May 2002 is updated to support G.shdsl.bis. In addition to providing support for G.shdsl.bis, this MIB may support SHDSL objects that are unique to the enterprise. Decisions as far as how this MIB is supported with respect to the `standard' MIB will be made in an individual basis by those involved with specific projects; those decisions are not dictated here. The following documents should be referenced with respect to this MIB: [G.991.2] ITU-T G991.2 `Single-pair high-speed digital subscriber line (SHDSL) transceivers,' December 2003. [DC-R15] ITU Study Group 15 Temporary Document `G.shdsl.bis: Draft Text`, April 2003. [RFC 3276] Ray, B., Abbi, R. `HDSL2-SHDSL-LINE-MIB', May 2002. ===================================================================== == == == Copyright (C) 2004 Paradyne Corporation. == == == =====================================================================
Main OID:
pdnHdsl2ShdslLineMIB.1.3.6.1.4.1.1795.2.24.2.6.23
89
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
pdnHdsl2ShdslLineMIBThe primary purpose of this MIB is to allow support of G.shdsl.bis based on the ITU Temporary Document, DC-R15, April 2003, until such a time as the `standard' MIB, HDSL2-SHDSL-LINE-MIB, RFC 3276, May 2002 is updated to support G.shdsl.bis. In addition to providing support for G.shdsl.bis, this MIB may support SHDSL objects that are unique to the enterprise. Decisions as far as how this MIB is supported with respect to the `standard' MIB will be made in an individual basis by those involved with specific projects; those decisions are not dictated here. The following documents should be referenced with respect to this MIB: [G.991.2] ITU-T G991.2 `Single-pair high-speed digital subscriber line (SHDSL) transceivers,' December 2003. [DC-R15] ITU Study Group 15 Temporary Document `G.shdsl.bis: Draft Text`, April 2003. [RFC 3276] Ray, B., Abbi, R. `HDSL2-SHDSL-LINE-MIB', May 2002. ===================================================================== == == == Copyright (C) 2004 Paradyne Corporation. == == == ===================================================================== MODULE-IDENTITY .1.3.6.1.4.1.1795.2.24.2.6.23 |
pdnHdsl2ShdslLineNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.0 |
pdnHdsl2ShdslLoopAttenCrossingThis notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the DSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.1 |
pdnHdsl2ShdslSNRMarginCrossingThis notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the DSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.2 |
pdnHdsl2ShdslPerfESThreshThis notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/ exceeded for the DSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.3 |
pdnHdsl2ShdslPerfSESThreshThis notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the DSL Segment Endpoint. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.4 |
pdnHdsl2ShdslPerfCRCanomaliesThreshThis notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the DSL Segment Endpoint. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.5 |
pdnHdsl2ShdslPerfLOSWSThreshThis notification indicates that the LOSW seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the DSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.6 |
pdnHdsl2ShdslPerfUASThreshThis notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.7 |
pdnHdsl2ShdslpowerBackoffThis notification indicates that the bit setting for powerBackoff in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.8 |
pdnHdsl2ShdsldeviceFaultThis notification indicates that the bit setting for deviceFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.9 |
pdnHdsl2ShdsldcContinuityFaultThis notification indicates that the bit setting for dcContinuityFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.10 |
pdnHdsl2ShdslconfigInitFailureThis notification indicates that the bit setting for configInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.11 |
pdnHdsl2ShdslprotocolInitFailureThis notification indicates that the bit setting for protocolInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.12 |
pdnHdsl2ShdslnoNeighborPresentThis notification indicates that the bit setting for noNeighborPresent in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.23.0.13 |
pdnHdsl2ShdslLineObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.1 |
pdnHdsl2ShdslSpanStatusExtTableThis table extends the hdsl2ShdslSpanStatusTable defined in the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which provides overall information of DSL spans. SEQUENCE OF PdnHdsl2ShdslSpanStatusExtEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.1 |
pdnHdsl2ShdslSpanStatusExtEntryAn entry extends the hdsl2ShdslSpanStatusEntry defined in [RFC 3276]. Each entry corresponds to a DSL line. PdnHdsl2ShdslSpanStatusExtEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1 |
pdnHdsl2ShdslStatusMaxAttainableLineRateContains the maximum attainable line rate, in bps, in this DSL span.ro Unsigned32 UNITS "bps" .1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.1 |
pdnHdsl2ShdslStatusActualLineRateContains the actual line rate, in bps, in this DSL span. This is based upon measurements made during line probing.ro Unsigned32 UNITS "bps" .1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.2 |
pdnHdsl2ShdslEndpointConfTableThis table supports configuration parameters for segment endpoints in a HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persistent manner. SEQUENCE OF PdnHdsl2ShdslEndpointConfEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.2 |
pdnHdsl2ShdslEndpointConfEntryEach entry represents a single segment endpoint in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire-pair of the associated modem. PdnHdsl2ShdslEndpointConfEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1 |
pdnHdsl2ShdslEndpointWirePairThe wire-pair of the modem associated with this segment endpoint as per the PdnHdsl2ShdslWirePair textual convention. PdnHdsl2ShdslWirePair .1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.1 |
pdnHdsl2ShdslEndpointAlarmConfProfileThis object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced by this object. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a zero- length SnmpAdminString). If the value is a zero-length SnmpAdminString, the endpoint uses the default Alarm Configuration Profile for the associated span as per the hdsl2ShdslSpanConfAlarmProfile object in the hdsl2ShdslSpanConfTable. The default value of this object is a zero-length SnmpAdminString. Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected.rw SnmpAdminString .1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.2 |
pdnHdsl2ShdslEndpointCurrTableThis table contains current status and performance information for segment endpoints in HDSL2/SHDSL Lines. As with other tables in this MIB indexed by ifIndex, entries in this table MUST be maintained in a persistent manner. SEQUENCE OF PdnHdsl2ShdslEndpointCurrEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.3 |
pdnHdsl2ShdslEndpointCurrEntryEach entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire-pair of the associated modem. PdnHdsl2ShdslEndpointCurrEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1 |
pdnHdsl2ShdslEndpointCurrAtnThe current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message.ro Integer32(-127..128) UNITS "dB" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.1 |
pdnHdsl2ShdslEndpointCurrSnrMgnThe current SNR margin for this endpoint as reported in a Status Response/SNR message.ro Integer32(-127..128) UNITS "dB" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.2 |
pdnHdsl2ShdslEndpointCurrStatusContains the current state of the endpoint. This is a bitmap of possible conditions. The various bit positions are: noDefect There no defects on the line. powerBackoff Indicates enhanced Power Backoff. deviceFault Indicates a vendor-dependent diagnostic or self-test fault has been detected. dcContinuityFault Indicates vendor-dependent conditions that interfere with span powering such as short and open circuits. snrMarginAlarm Indicates that the SNR margin has dropped below the alarm threshold. loopAttenuationAlarm Indicates that the loop attenuation exceeds the alarm threshold. loswFailureAlarm Indicates a forward LOSW alarm. configInitFailure Endpoint failure during initialization due to paired endpoint not able to support requested configuration. protocolInitFailure Endpoint failure during initialization due to incompatible protocol used by the paired endpoint. noNeighborPresent Endpoint failure during initialization due to no activation sequence detected from paired endpoint. loopbackActive A loopback is currently active at this Segment Endpoint. This is intended to supplement ifOperStatus. Note that there is a 1-1 relationship between the status bits defined in this object and the notification thresholds defined elsewhere in this MIB.ro Bits .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.3 |
pdnHdsl2ShdslEndpointESCount of Errored Seconds (ES) on this endpoint since the xU was last restarted.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.4 |
pdnHdsl2ShdslEndpointSESCount of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.5 |
pdnHdsl2ShdslEndpointCRCanomaliesCount of CRC anomalies on this endpoint since the xU was last restarted.ro Counter32 UNITS "detected CRC Anomalies" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.6 |
pdnHdsl2ShdslEndpointLOSWSCount of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.7 |
pdnHdsl2ShdslEndpointUASCount of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.8 |
pdnHdsl2ShdslEndpointCurr15MinTimeElapsedTotal elapsed seconds in the current 15-minute interval.ro Hdsl2ShdslPerfTimeElapsed UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.9 |
pdnHdsl2ShdslEndpointCurr15MinESCount of Errored Seconds (ES) in the current 15-minute interval.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.10 |
pdnHdsl2ShdslEndpointCurr15MinSESCount of Severely Errored Seconds (SES) in the current 15-minute interval.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.11 |
pdnHdsl2ShdslEndpointCurr15MinCRCanomaliesCount of CRC anomalies in the current 15-minute interval.ro PerfCurrentCount UNITS "detected CRC Anomalies" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.12 |
pdnHdsl2ShdslEndpointCurr15MinLOSWSCount of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.13 |
pdnHdsl2ShdslEndpointCurr15MinUASCount of Unavailable Seconds (UAS) in the current 15-minute interval.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.14 |
pdnHdsl2ShdslEndpointCurr1DayTimeElapsedNumber of seconds that have elapsed since the beginning of the current 1-day interval.ro Hdsl2ShdslPerfTimeElapsed UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.15 |
pdnHdsl2ShdslEndpointCurr1DayESCount of Errored Seconds (ES) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.16 |
pdnHdsl2ShdslEndpointCurr1DaySESCount of Severely Errored Seconds (SES) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.17 |
pdnHdsl2ShdslEndpointCurr1DayCRCanomaliesCount of CRC anomalies during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "detected CRC Anomalies" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.18 |
pdnHdsl2ShdslEndpointCurr1DayLOSWSCount of Loss of Sync Word (LOSW) Seconds during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.19 |
pdnHdsl2ShdslEndpointCurr1DayUASCount of Unavailable Seconds (UAS) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.20 |
pdnHdsl2Shdsl15MinIntervalTableThis table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. SEQUENCE OF PdnHdsl2Shdsl15MinIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.4 |
pdnHdsl2Shdsl15MinIntervalEntryAn entry in the pdnHdsl2Shdsl15MinIntervalTable. PdnHdsl2Shdsl15MinIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1 |
pdnHdsl2Shdsl15MinIntervalNumberPerformance Data Interval number. 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. Unsigned32 .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.1 |
pdnHdsl2Shdsl15MinIntervalESCount of Errored Seconds (ES) during the interval.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.2 |
pdnHdsl2Shdsl15MinIntervalSESCount of Severely Errored Seconds (SES) during the interval.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.3 |
pdnHdsl2Shdsl15MinIntervalCRCanomaliesCount of CRC anomalies during the interval.ro PerfIntervalCount UNITS "detected CRC Anomalies" .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.4 |
pdnHdsl2Shdsl15MinIntervalLOSWSCount of Loss of Sync Word (LOSW) Seconds during the interval.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.5 |
pdnHdsl2Shdsl15MinIntervalUASCount of Unavailable Seconds (UAS) during the interval.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.6 |
pdnHdsl2Shdsl1DayIntervalTableThis table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. SEQUENCE OF PdnHdsl2Shdsl1DayIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.5 |
pdnHdsl2Shdsl1DayIntervalEntryAn entry in the pdnHdsl2Shdsl1DayIntervalTable. PdnHdsl2Shdsl1DayIntervalEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1 |
pdnHdsl2Shdsl1DayIntervalNumberHistory Data Interval number. Interval 1 is the the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional. Unsigned32 .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.1 |
pdnHdsl2Shdsl1DayIntervalMoniSecsThe amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.ro Hdsl2ShdslPerfTimeElapsed UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.2 |
pdnHdsl2Shdsl1DayIntervalESCount of Errored Seconds (ES) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.3 |
pdnHdsl2Shdsl1DayIntervalSESCount of Severely Errored Seconds (SES) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.4 |
pdnHdsl2Shdsl1DayIntervalCRCanomaliesCount of CRC anomalies during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "detected CRC Anomalies" .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.5 |
pdnHdsl2Shdsl1DayIntervalLOSWSCount of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.6 |
pdnHdsl2Shdsl1DayIntervalUASCount of Unavailable Seconds (UAS) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "seconds" .1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.7 |
pdnHdsl2ShdslSpanConfProfileExtTableThis table extends the hdsl2ShdslSpanConfProfileTable defined in the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which supports definitions of span configuration profiles for DSL lines. IMPORTANT NOTE: This table is a 'pseudo-augments' of the hdsl2ShdslSpanConfProfileTable. Refer to the April 21, 2004 revision description for a discussion on why the table is indexed as opposed to augments. This table shares the same table table index as the hdsl2ShdslSpanConfProfileTable. However, this table does not have a row status object. Therefore, rows are created or deleted in this table by creating or deleting rows in the hdsl2ShdslSpanConfProfileTable. SEQUENCE OF PdnHdsl2ShdslSpanConfProfileExtEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.6 |
pdnHdsl2ShdslSpanConfProfileExtEntryAn entry extends the hdsl2ShdslSpanConfProfileEntry defined in [RFC 3276]. Each entry corresponds to a profile for a span. PdnHdsl2ShdslSpanConfProfileExtEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1 |
pdnHdsl2ShdslSpanConfWireInterfaceThis object configures number of wires that are operational for this span. The following values are defined for this object: twoWire(1) - 2-wire mode fourWire(2) - 4-wire mode sixWire(3) - 6-wire mode eightWire(4) - 8-wire moderw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.1 |
pdnHdsl2ShdslSpanConfMinLineRateThis object configures the minimum transmission rate, in multiples of 64 kbits per second, for the associated DSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (pdnHdsl2ShdslSpanConfMaxLineRate), the line rate is considered `fixed'. If the minimum line rate is less than the maximum line rate, the line is considered `rate-adaptive'.rw Unsigned32 UNITS "bps" .1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.2 |
pdnHdsl2ShdslSpanConfMaxLineRateThis object configures the maximum transmission rate, in multiples of 64 kbits per second, for the associated DSL Line in bits-per-second (bps). If the minimum line rate (pdnHdsl2Shdsl- SpanConfMinLineRate) equals the maximum line rate, the line rate is considered `fixed'. if the minimum line rate is less than the maximum line rate, the line rate is considered `rate-adaptive'.rw Unsigned32 UNITS "bps" .1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.3 |
pdnHdsl2ShdslIfTableThis table provides objects related to a particular interface and each entry corresponds to an ifIndex. SEQUENCE OF PdnHdsl2ShdslIfEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.7 |
pdnHdsl2ShdslIfEntryAn entry in the pdnHdsl2ShdslIfTableTable. PdnHdsl2ShdslIfEntry .1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1 |
pdnHdsl2ShdslIfTableEquipModeThis object allows the mode of the equipment to be set.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1.1 |
pdnHdsl2ShdslExtendedRateModeThis object is used to select a mode of operation that supports extended rates. Some hardware implementations require different configurations base on whether or not higher speed rates are desired. For example, an implementation may require different code be loaded in a digital signal processor or an implementation may dictate that fewer subscriber ports are supported for a higher data rate. The payload5696(2) corresponds to the 5696 kbits per second rate specified in G.991.2, Annex F.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.23.1.8 |
pdnHdsl2ShdslLineAFNs OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.2 |
pdnHdsl2ShdslLineConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.3 |
pdnHdsl2ShdslLineCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.3.1 |
pdnHdsl2ShdslLineMIBComplianceThe compliance statement for pdnHdsl2ShdslLineMIB entities which implement the pdnHdsl2ShdslLineMIB. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.1.1 |
pdnHdsl2ShdslLineGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.3.2 |
pdnHdsl2ShdslLineObjGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1 |
pdnHdsl2ShdslSpanShdslStatusGroupThis group supports objects for retrieving SHDSL-specific span related status. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.1 |
pdnHdsl2ShdslEndpointConfGroupThis group supports objects for configuring parameters for segment endpoints in SHDSL lines. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.2 |
pdnHdsl2ShdslEndpointCurrGroupThis group supports objects which provide current status and performance measurements relating to segment endpoints in DSL lines. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.3 |
pdnHdsl2Shdsl15MinIntervalGroupThis group supports objects which maintain historic performance measurements relating to segment endpoints in DSL lines. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.4 |
pdnHdsl2Shdsl1DayIntervalGroupThis group supports objects which maintain historic performance measurements relating to segment endpoints in DSL line in 1-day intervals. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.5 |
pdnHdsl2ShdslSpanConfProfileGroupThis group supports objects that constitute configuration profiles for configuring span related parameters in DSL lines. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.6 |
pdnHdsl2ShdslIfTableGroupThis group supports objects on a per-interface basis. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.7 |
pdnHdsl2ShdslExtendedRateModeGroupThis group supports objects to select the extended base data rate mode. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.8 |
pdnHdsl2ShdslLineAfnGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.2 |
pdnHdsl2ShdslLineNtfyGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3 |
pdnHdsl2ShdslNotificationGroupThis group supports notifications of significant conditions associated with DSL lines. Unknown .1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3.1 |