HDSL2-SHDSL-LINE-MIB
This MIB module defines a collection of objects for managing HDSL2/SHDSL lines. An agent may reside at either end of the line; however, the MIB module is designed to require no management communication between the modems beyond that inherent in the low-level EOC line protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2 (for SHDSL lines). Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4319; see the RFC itself for full legal notices.
Main OID:
hdsl2ShdslMIB.1.3.6.1.2.1.10.48
151
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
151 total| Object Name |
|---|
hdsl2ShdslMIBThis MIB module defines a collection of objects for managing HDSL2/SHDSL lines. An agent may reside at either end of the line; however, the MIB module is designed to require no management communication between the modems beyond that inherent in the low-level EOC line protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2 (for SHDSL lines). Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4319; see the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.10.48 |
hdsl2ShdslNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.10.48.0 |
hdsl2ShdslLoopAttenCrossingThis notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.1 |
hdsl2ShdslSNRMarginCrossingThis notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.2 |
hdsl2ShdslPerfESThreshThis notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.3 |
hdsl2ShdslPerfSESThreshThis notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.4 |
hdsl2ShdslPerfCRCanomaliesThreshThis notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.5 |
hdsl2ShdslPerfLOSWSThreshThis notification indicates that the LOSW Seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.6 |
hdsl2ShdslPerfUASThreshThis notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.7 |
hdsl2ShdslSpanInvalidNumRepeatersThis notification indicates that a mismatch has been detected between the number of repeater/regenerator units configured for an HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters object and the actual number of repeater/regenerator units discovered via the EOC. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.8 |
hdsl2ShdslLoopbackFailureThis notification indicates that an endpoint maintenance loopback command failed for an HDSL2/SHDSL segment. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.9 |
hdsl2ShdslpowerBackoffThis notification indicates that the bit setting for powerBackoff in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.10 |
hdsl2ShdsldeviceFaultThis notification indicates that the bit setting for deviceFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.11 |
hdsl2ShdsldcContinuityFaultThis notification indicates that the bit setting for dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.12 |
hdsl2ShdslconfigInitFailureThis notification indicates that the bit setting for configInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.13 |
hdsl2ShdslprotocolInitFailureThis notification indicates that the bit setting for protocolInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.14 |
hdsl2ShdslnoNeighborPresentThis notification indicates that the bit setting for noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.15 |
hdsl2ShdslLocalPowerLossThis notification indicates impending unit failure due to loss of local power (last gasp). NOTIFICATION-TYPE .1.3.6.1.2.1.10.48.0.16 |
hdsl2ShdslMibObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.48.1 |
hdsl2ShdslSpanConfTableThis table supports overall configuration of HDSL2/SHDSL spans. Entries in this table MUST be maintained in a persistent manner. SEQUENCE OF Hdsl2ShdslSpanConfEntry .1.3.6.1.2.1.10.48.1.1 |
hdsl2ShdslSpanConfEntryAn entry in the hdsl2ShdslSpanConfTable. Each entry represents the complete span in a single HDSL2/SHDSL line. It is indexed by the ifIndex of the associated HDSL2/SHDSL line. Hdsl2ShdslSpanConfEntry .1.3.6.1.2.1.10.48.1.1.1 |
hdsl2ShdslSpanConfNumRepeatersThis object provisions the number of repeaters/regenerators in this HDSL2/SHDSL span.rw Unsigned32 .1.3.6.1.2.1.10.48.1.1.1.1 |
hdsl2ShdslSpanConfProfileThis object is a pointer to a span configuration profile in the hdsl2ShdslSpanConfProfileTable, which applies to this span. The value of this object is the index of the referenced profile in the hdsl2ShdslSpanConfProfileTable. Note that span configuration profiles are only applicable to SHDSL lines. HDSL2 lines MUST reference the default profile, 'DEFVAL'. By default, this object will have the value 'DEFVAL' (the index of the default profile). Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslSpanConfProfileTable, MUST be rejected.rw SnmpAdminString .1.3.6.1.2.1.10.48.1.1.1.2 |
hdsl2ShdslSpanConfAlarmProfileThis object is a pointer to an alarm configuration profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The alarm threshold configuration in the referenced profile will be used by default for all segment endpoints in this span. Individual endpoints may override this profile by explicitly specifying some other profile in the hdsl2ShdslEndpointConfTable. By default, this object will have the value 'DEFVAL' (the index of the default profile). Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected.rw SnmpAdminString .1.3.6.1.2.1.10.48.1.1.1.3 |
hdsl2ShdslSpanStatusTableThis table provides overall status information of HDSL2/SHDSL spans. This table contains live data from equipment. As such, it is NOT persistent. SEQUENCE OF Hdsl2ShdslSpanStatusEntry .1.3.6.1.2.1.10.48.1.2 |
hdsl2ShdslSpanStatusEntryAn entry in the hdsl2ShdslSpanStatusTable. Each entry represents the complete span in a single HDSL2/SHDSL line. It is indexed by the ifIndex of the associated HDSL2/SHDSL line. Hdsl2ShdslSpanStatusEntry .1.3.6.1.2.1.10.48.1.2.1 |
hdsl2ShdslStatusNumAvailRepeatersContains the actual number of repeaters/regenerators discovered in this HDSL2/SHDSL span.ro Unsigned32 .1.3.6.1.2.1.10.48.1.2.1.1 |
hdsl2ShdslStatusMaxAttainableLineRateContains the maximum attainable line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon measurements made during line probing. This rate includes payload (user data) and any applicable framing overhead.ro Unsigned32 .1.3.6.1.2.1.10.48.1.2.1.2 |
hdsl2ShdslStatusActualLineRateContains the actual line rate in this HDSL2/SHDSL span. This SHOULD equal ifSpeed. This rate includes payload (user data) and any applicable framing overheadro Unsigned32 .1.3.6.1.2.1.10.48.1.2.1.3 |
hdsl2ShdslStatusTransmissionModeCurrentContains the current Power Spectral Density (PSD) regional setting of the HDSL2/SHDSL span.ro Hdsl2ShdslTransmissionModeType .1.3.6.1.2.1.10.48.1.2.1.4 |
hdsl2ShdslStatusMaxAttainablePayloadRateContains the maximum attainable payload (user data) line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon measurements made during line probing. Any framing overhead is not included.ro Unsigned32 .1.3.6.1.2.1.10.48.1.2.1.5 |
hdsl2ShdslStatusActualPayloadRateContains the actual line rate in this HDSL2/SHDSL span. Any framing overhead is not included.ro Unsigned32 .1.3.6.1.2.1.10.48.1.2.1.6 |
hdsl2ShdslInventoryTableThis table supports retrieval of unit inventory information available via the EOC from units in an HDSL2/SHDSL line. Entries in this table are dynamically created during the line discovery process. The life cycle for these entries is as follows: - xtu discovers a device, either a far-end xtu or an xru - an inventory table entry is created for the device - the line goes down for whatever reason - inventory table entries for unreachable devices are destroyed As these entries are created/destroyed dynamically, they are NOT persistent. SEQUENCE OF Hdsl2ShdslInventoryEntry .1.3.6.1.2.1.10.48.1.3 |
hdsl2ShdslInventoryEntryAn entry in the hdsl2ShdslInventoryTable. Each entry represents inventory information for a single unit in an HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the associated unit. Hdsl2ShdslInventoryEntry .1.3.6.1.2.1.10.48.1.3.1 |
hdsl2ShdslInvIndexEach entry in this table corresponds to a physical element in an HDSL2/SHDSL span. It is based on the EOC unit addressing scheme with reference to the xtuC. Hdsl2ShdslUnitId .1.3.6.1.2.1.10.48.1.3.1.1 |
hdsl2ShdslInvVendorIDVendor ID as reported in an Inventory Response message.ro OCTET STRING .1.3.6.1.2.1.10.48.1.3.1.2 |
hdsl2ShdslInvVendorModelNumberVendor model number as reported in an Inventory Response message.ro OCTET STRING .1.3.6.1.2.1.10.48.1.3.1.3 |
hdsl2ShdslInvVendorSerialNumberVendor serial number as reported in an Inventory Response message.ro OCTET STRING .1.3.6.1.2.1.10.48.1.3.1.4 |
hdsl2ShdslInvVendorEOCSoftwareVersionVendor EOC version as reported in a Discovery Response message.ro Integer32 .1.3.6.1.2.1.10.48.1.3.1.5 |
hdsl2ShdslInvStandardVersionVersion of the HDSL2/SHDSL standard implemented, as reported in an Inventory Response message.ro Integer32 .1.3.6.1.2.1.10.48.1.3.1.6 |
hdsl2ShdslInvVendorListNumberVendor list number as reported in an Inventory Response message.ro OCTET STRING .1.3.6.1.2.1.10.48.1.3.1.7 |
hdsl2ShdslInvVendorIssueNumberVendor issue number as reported in an Inventory Response message.ro OCTET STRING .1.3.6.1.2.1.10.48.1.3.1.8 |
hdsl2ShdslInvVendorSoftwareVersionVendor software version as reported in an Inventory Response message.ro OCTET STRING .1.3.6.1.2.1.10.48.1.3.1.9 |
hdsl2ShdslInvEquipmentCodeEquipment code conforming to ANSI T1.213, Coded Identification of Equipment Entities.ro OCTET STRING .1.3.6.1.2.1.10.48.1.3.1.10 |
hdsl2ShdslInvVendorOtherOther vendor information as reported in an Inventory Response message.ro OCTET STRING .1.3.6.1.2.1.10.48.1.3.1.11 |
hdsl2ShdslInvTransmissionModeCapabilityContains the transmission mode capability of the SHDSL unit.ro Hdsl2ShdslTransmissionModeType .1.3.6.1.2.1.10.48.1.3.1.12 |
hdsl2ShdslEndpointConfTableThis table supports configuration parameters for segment endpoints in an HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persistent manner. SEQUENCE OF Hdsl2ShdslEndpointConfEntry .1.3.6.1.2.1.10.48.1.4 |
hdsl2ShdslEndpointConfEntryAn entry in the hdsl2ShdslEndpointConfTable. Each entry represents a single segment endpoint in an HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire pair of the associated modem. Hdsl2ShdslEndpointConfEntry .1.3.6.1.2.1.10.48.1.4.1 |
hdsl2ShdslEndpointSideThe side of the unit associated with this segment endpoint -- Network/Customer side -- as per the Hdsl2ShdslUnitSide textual convention. Hdsl2ShdslUnitSide .1.3.6.1.2.1.10.48.1.4.1.1 |
hdsl2ShdslEndpointWirePairThe wire pair of the modem associated with this segment endpoint as per the Hdsl2ShdslWirePair textual convention. Hdsl2ShdslWirePair .1.3.6.1.2.1.10.48.1.4.1.2 |
hdsl2ShdslEndpointAlarmConfProfileThis object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced by this object. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a zero-length SnmpAdminString). If the value is a zero-length SnmpAdminString, the endpoint uses the default Alarm Configuration Profile for the associated span as per the hdsl2ShdslSpanConfAlarmProfile object in the hdsl2ShdslSpanConfTable. The default value of this object is a zero-length SnmpAdminString. Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected.rw SnmpAdminString .1.3.6.1.2.1.10.48.1.4.1.3 |
hdsl2ShdslEndpointCurrTableThis table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by ifIndex, entries in this table MUST be maintained in a persistent manner. SEQUENCE OF Hdsl2ShdslEndpointCurrEntry .1.3.6.1.2.1.10.48.1.5 |
hdsl2ShdslEndpointCurrEntryAn entry in the hdsl2ShdslEndpointCurrTable. Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire pair of the associated modem. Hdsl2ShdslEndpointCurrEntry .1.3.6.1.2.1.10.48.1.5.1 |
hdsl2ShdslEndpointCurrAtnThe current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message.ro Integer32(-127..128) UNITS "dB" .1.3.6.1.2.1.10.48.1.5.1.1 |
hdsl2ShdslEndpointCurrSnrMgnThe current SNR margin for this endpoint as reported in a Status Response/SNR message.ro Integer32(-127..128) UNITS "dB" .1.3.6.1.2.1.10.48.1.5.1.2 |
hdsl2ShdslEndpointCurrStatusContains the current state of the endpoint. This is a bit-map of possible conditions. The various bit positions are as follows: noDefect There are no defects on the line. powerBackoff Indicates enhanced Power Backoff. deviceFault Indicates that a vendor-dependent diagnostic or self-test fault has been detected. dcContinuityFault Indicates vendor-dependent conditions that interfere with span powering such as short and open circuits. snrMarginAlarm Indicates that the SNR margin has dropped below the alarm threshold. loopAttenuationAlarm Indicates that the loop attenuation exceeds the alarm threshold. loswFailureAlarm Indicates a forward LOSW alarm. configInitFailure Endpoint failure during initialization due to paired endpoint not able to support requested configuration. protocolInitFailure Endpoint failure during initialization due to incompatible protocol used by the paired endpoint. noNeighborPresent Endpoint failure during initialization due to no activation sequence detected from paired endpoint. loopbackActive A loopback is currently active at this segment endpoint. This is intended to supplement ifOperStatus. Note that there is a 1:1 relationship between the status bits defined in this object and the notification thresholds defined elsewhere in this MIB module.ro Bits .1.3.6.1.2.1.10.48.1.5.1.3 |
hdsl2ShdslEndpointESCount of Errored Seconds (ES) on this endpoint since the xU was last restarted.ro Counter32 UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.4 |
hdsl2ShdslEndpointSESCount of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted.ro Counter32 UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.5 |
hdsl2ShdslEndpointCRCanomaliesCount of CRC anomalies on this endpoint since the xU was last restarted.ro Counter32 UNITS "detected CRC Anomalies" .1.3.6.1.2.1.10.48.1.5.1.6 |
hdsl2ShdslEndpointLOSWSCount of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted.ro Counter32 UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.7 |
hdsl2ShdslEndpointUASCount of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted.ro Counter32 UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.8 |
hdsl2ShdslEndpointCurr15MinTimeElapsedTotal elapsed seconds in the current 15-minute interval.ro Hdsl2ShdslPerfTimeElapsed UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.9 |
hdsl2ShdslEndpointCurr15MinESCount of Errored Seconds (ES) in the current 15-minute interval.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.10 |
hdsl2ShdslEndpointCurr15MinSESCount of Severely Errored Seconds (SES) in the current 15-minute interval.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.11 |
hdsl2ShdslEndpointCurr15MinCRCanomaliesCount of CRC anomalies in the current 15-minute interval.ro PerfCurrentCount UNITS "detected CRC Anomalies" .1.3.6.1.2.1.10.48.1.5.1.12 |
hdsl2ShdslEndpointCurr15MinLOSWSCount of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.13 |
hdsl2ShdslEndpointCurr15MinUASCount of Unavailable Seconds (UAS) in the current 15-minute interval.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.14 |
hdsl2ShdslEndpointCurr1DayTimeElapsedNumber of seconds that have elapsed since the beginning of the current 1-day interval.ro Hdsl2ShdslPerfTimeElapsed UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.15 |
hdsl2ShdslEndpointCurr1DayESCount of Errored Seconds (ES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.16 |
hdsl2ShdslEndpointCurr1DaySESCount of Severely Errored Seconds (SES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.17 |
hdsl2ShdslEndpointCurr1DayCRCanomaliesCount of CRC anomalies during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "detected CRC Anomalies" .1.3.6.1.2.1.10.48.1.5.1.18 |
hdsl2ShdslEndpointCurr1DayLOSWSCount of Loss of Sync Word (LOSW) Seconds during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.19 |
hdsl2ShdslEndpointCurr1DayUASCount of Unavailable Seconds (UAS) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.ro Hdsl2ShdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.5.1.20 |
hdsl2ShdslEndpointCurrTipRingReversalThis object indicates the state of the tip/ring for the wire pair.ro Enumeration .1.3.6.1.2.1.10.48.1.5.1.21 |
hdsl2ShdslEndpointCurrActivationStateThis object indicates the activation or training state of the wire pair.ro Enumeration .1.3.6.1.2.1.10.48.1.5.1.22 |
hdsl2Shdsl15MinIntervalTableThis table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. SEQUENCE OF Hdsl2Shdsl15MinIntervalEntry .1.3.6.1.2.1.10.48.1.6 |
hdsl2Shdsl15MinIntervalEntryAn entry in the hdsl2Shdsl15MinIntervalTable. Hdsl2Shdsl15MinIntervalEntry .1.3.6.1.2.1.10.48.1.6.1 |
hdsl2Shdsl15MinIntervalNumberPerformance Data Interval number. Interval 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. Unsigned32 .1.3.6.1.2.1.10.48.1.6.1.1 |
hdsl2Shdsl15MinIntervalESCount of Errored Seconds (ES) during the interval.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.6.1.2 |
hdsl2Shdsl15MinIntervalSESCount of Severely Errored Seconds (SES) during the interval.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.6.1.3 |
hdsl2Shdsl15MinIntervalCRCanomaliesCount of CRC anomalies during the interval.ro PerfIntervalCount UNITS "detected CRC Anomalies" .1.3.6.1.2.1.10.48.1.6.1.4 |
hdsl2Shdsl15MinIntervalLOSWSCount of Loss of Sync Word (LOSW) Seconds during the interval.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.6.1.5 |
hdsl2Shdsl15MinIntervalUASCount of Unavailable Seconds (UAS) during the interval.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.6.1.6 |
hdsl2Shdsl1DayIntervalTableThis table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. SEQUENCE OF Hdsl2Shdsl1DayIntervalEntry .1.3.6.1.2.1.10.48.1.7 |
hdsl2Shdsl1DayIntervalEntryAn entry in the hdsl2Shdsl1DayIntervalTable. Hdsl2Shdsl1DayIntervalEntry .1.3.6.1.2.1.10.48.1.7.1 |
hdsl2Shdsl1DayIntervalNumberHistory Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional. Unsigned32 .1.3.6.1.2.1.10.48.1.7.1.1 |
hdsl2Shdsl1DayIntervalMoniSecsThe amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.ro Hdsl2ShdslPerfTimeElapsed UNITS "seconds" .1.3.6.1.2.1.10.48.1.7.1.2 |
hdsl2Shdsl1DayIntervalESCount of Errored Seconds (ES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.7.1.3 |
hdsl2Shdsl1DayIntervalSESCount of Severely Errored Seconds (SES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.7.1.4 |
hdsl2Shdsl1DayIntervalCRCanomaliesCount of CRC anomalies during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "detected CRC Anomalies" .1.3.6.1.2.1.10.48.1.7.1.5 |
hdsl2Shdsl1DayIntervalLOSWSCount of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.7.1.6 |
hdsl2Shdsl1DayIntervalUASCount of Unavailable Seconds (UAS) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.ro Hdsl2Shdsl1DayIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.48.1.7.1.7 |
hdsl2ShdslEndpointMaintTableThis table supports maintenance operations (e.g., loopbacks) to be performed on HDSL2/SHDSL segment endpoints. This table contains live data from equipment. As such, it is NOT persistent. SEQUENCE OF Hdsl2ShdslEndpointMaintEntry .1.3.6.1.2.1.10.48.1.8 |
hdsl2ShdslEndpointMaintEntryAn entry in the hdsl2ShdslEndpointMaintTable. Each entry corresponds to a single segment endpoint and is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, and the side of the unit. Hdsl2ShdslEndpointMaintEntry .1.3.6.1.2.1.10.48.1.8.1 |
hdsl2ShdslMaintLoopbackConfigThis object controls configuration of loopbacks for the associated segment endpoint. The status of the loopback is obtained via the hdsl2ShdslEndpointCurrStatus object.rw Enumeration .1.3.6.1.2.1.10.48.1.8.1.1 |
hdsl2ShdslMaintTipRingReversalThis object indicates the state of the tip/ring pair at the associated segment endpoint.ro Enumeration .1.3.6.1.2.1.10.48.1.8.1.2 |
hdsl2ShdslMaintPowerBackOffThis object configures the receiver at the associated segment endpoint to operate in default or enhanced power backoff mode.rw Enumeration .1.3.6.1.2.1.10.48.1.8.1.3 |
hdsl2ShdslMaintSoftRestartThis object enables the manager to trigger a soft restart of the modem at the associated segment endpoint. The manager may only set this object to the 'restart(2)' value, which initiates a restart. The agent will perform a restart after approximately 5 seconds. Following the 5 second period, the agent will restore the object to the 'ready(1)' state.rw Enumeration .1.3.6.1.2.1.10.48.1.8.1.4 |
hdsl2ShdslUnitMaintTableThis table supports maintenance operations for units in a HDSL2/SHDSL line. Entries in this table MUST be maintained in a persistent manner. SEQUENCE OF Hdsl2ShdslUnitMaintEntry .1.3.6.1.2.1.10.48.1.9 |
hdsl2ShdslUnitMaintEntryAn entry in the hdsl2ShdslUnitMaintTable. Each entry corresponds to a single unit and is indexed by the ifIndex of the HDSL2/SHDSL line and the UnitId of the associated unit. Hdsl2ShdslUnitMaintEntry .1.3.6.1.2.1.10.48.1.9.1 |
hdsl2ShdslMaintLoopbackTimeoutThis object configures the timeout value for loopbacks initiated at segments endpoints contained in the associated unit. A value of 0 disables the timeout.rw Integer32 .1.3.6.1.2.1.10.48.1.9.1.1 |
hdsl2ShdslMaintUnitPowerSourceThis object indicates the DC power source being used by the associated unit.ro Enumeration .1.3.6.1.2.1.10.48.1.9.1.2 |
hdsl2ShdslSpanConfProfileTableThis table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintained in a persistent manner. SEQUENCE OF Hdsl2ShdslSpanConfProfileEntry .1.3.6.1.2.1.10.48.1.10 |
hdsl2ShdslSpanConfProfileEntryEach entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a profile are applied to those lines referencing that profile (see the hdsl2ShdslSpanConfProfile object). Profiles may be created/deleted using the row creation/deletion mechanism via hdsl2ShdslSpanConfProfileRowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed. Hdsl2ShdslSpanConfProfileEntry .1.3.6.1.2.1.10.48.1.10.1 |
hdsl2ShdslSpanConfProfileNameThis object is the unique index associated with this profile. Entries in this table are referenced via the object hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry. SnmpAdminString .1.3.6.1.2.1.10.48.1.10.1.1 |
hdsl2ShdslSpanConfWireInterfaceThis object configures the two-wire or optional four-wire, six-wire, or eight-wire operation for SHDSL lines.rw Enumeration .1.3.6.1.2.1.10.48.1.10.1.2 |
hdsl2ShdslSpanConfMinLineRateThis object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any applicable framing overhead. If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.rw Unsigned32 .1.3.6.1.2.1.10.48.1.10.1.3 |
hdsl2ShdslSpanConfMaxLineRateThis object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any applicable framing overhead. If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.rw Unsigned32 .1.3.6.1.2.1.10.48.1.10.1.4 |
hdsl2ShdslSpanConfPSDThis object configures use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. Support for symmetric PSD is mandatory for all supported data rates. Support for asymmetric PSD is optional.rw Enumeration .1.3.6.1.2.1.10.48.1.10.1.5 |
hdsl2ShdslSpanConfTransmissionModeThis object specifies the regional setting for the SHDSL line.rw Hdsl2ShdslTransmissionModeType .1.3.6.1.2.1.10.48.1.10.1.6 |
hdsl2ShdslSpanConfRemoteEnabledThis object enables/disables support for remote management of the units in an SHDSL line from the STU-R via the EOC.rw Enumeration .1.3.6.1.2.1.10.48.1.10.1.7 |
hdsl2ShdslSpanConfPowerFeedingThis object enables/disables support for optional power feeding in an SHDSL line.rw Enumeration .1.3.6.1.2.1.10.48.1.10.1.8 |
hdsl2ShdslSpanConfCurrCondTargetMarginDownThis object specifies the downstream current condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.rw Integer32(-10..21) UNITS "dB" .1.3.6.1.2.1.10.48.1.10.1.9 |
hdsl2ShdslSpanConfWorstCaseTargetMarginDownThis object specifies the downstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.rw Integer32(-10..21) UNITS "dB" .1.3.6.1.2.1.10.48.1.10.1.10 |
hdsl2ShdslSpanConfCurrCondTargetMarginUpThis object specifies the upstream current-condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.rw Integer32(-10..21) UNITS "dB" .1.3.6.1.2.1.10.48.1.10.1.11 |
hdsl2ShdslSpanConfWorstCaseTargetMarginUpThis object specifies the upstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.rw Integer32(-10..21) UNITS "dB" .1.3.6.1.2.1.10.48.1.10.1.12 |
hdsl2ShdslSpanConfUsedTargetMarginsIndicates whether a target SNR margin is enabled or disabled. This is a bit-map of possible settings. The various bit positions are as follows: currCondDown - current-condition downstream target SNR margin enabled worstCaseDown - worst-case downstream target SNR margin enabled currCondUp - current-condition upstream target SNR margin enabled worstCaseUp - worst-case upstream target SNR margin enabled.rw Bits .1.3.6.1.2.1.10.48.1.10.1.13 |
hdsl2ShdslSpanConfReferenceClockThis object configures the clock reference for the STU-C in an SHDSL Line.rw Hdsl2ShdslClockReferenceType .1.3.6.1.2.1.10.48.1.10.1.14 |
hdsl2ShdslSpanConfLineProbeEnableThis object enables/disables support for Line Probe of the units in an SHDSL line. When Line Probe is enabled, the system performs Line Probing to find the best possible rate. If Line Probe is disabled, the rate adaptation phase is skipped to shorten set up time.rw Enumeration .1.3.6.1.2.1.10.48.1.10.1.15 |
hdsl2ShdslSpanConfProfileRowStatusThis object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.10.48.1.10.1.16 |
hdsl2ShdslEndpointAlarmConfProfileTableThis table supports definitions of alarm configuration profiles for HDSL2/SHDSL segment endpoints. This table MUST be maintained in a persistent manner. SEQUENCE OF Hdsl2ShdslEndpointAlarmConfProfileEntry .1.3.6.1.2.1.10.48.1.11 |
hdsl2ShdslEndpointAlarmConfProfileEntryEach entry corresponds to a single alarm configuration profile. Each profile contains a set of parameters for setting alarm thresholds for various performance attributes monitored at HDSL2/SHDSL segment endpoints. Profiles may be created/deleted using the row creation/deletion mechanism via hdsl2ShdslEndpointAlarmConfProfileRowStatus. If an active entry is referenced in either hdsl2ShdslSpanConfAlarmProfile or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain active until all references are removed. Hdsl2ShdslEndpointAlarmConfProfileEntry .1.3.6.1.2.1.10.48.1.11.1 |
hdsl2ShdslEndpointAlarmConfProfileNameThis object is the unique index associated with this profile. SnmpAdminString .1.3.6.1.2.1.10.48.1.11.1.1 |
hdsl2ShdslEndpointThreshLoopAttenuationThis object configures the loop attenuation alarm threshold. When the current value of hdsl2ShdslEndpointCurrAtn reaches or exceeds this threshold, an hdsl2ShdslLoopAttenCrossing MAY be generated.rw Integer32(-127..128) UNITS "dB" .1.3.6.1.2.1.10.48.1.11.1.2 |
hdsl2ShdslEndpointThreshSNRMarginThis object configures the SNR margin alarm threshold. When the current value of hdsl2ShdslEndpointCurrSnrMgn reaches or drops below this threshold, a hdsl2ShdslSNRMarginCrossing MAY be generated.rw Integer32(-127..128) UNITS "dB" .1.3.6.1.2.1.10.48.1.11.1.3 |
hdsl2ShdslEndpointThreshESThis object configures the threshold for the number of Errored Seconds (ES) within any given 15-minute performance data collection interval. If the value of Errored Seconds in a particular 15-minute collection interval reaches/ exceeds this value, an hdsl2ShdslPerfESThresh MAY be generated. At most, one notification will be sent per interval per endpoint.rw Hdsl2ShdslPerfIntervalThreshold UNITS "seconds" .1.3.6.1.2.1.10.48.1.11.1.4 |
hdsl2ShdslEndpointThreshSESThis object configures the threshold for the number of Severely Errored Seconds (SES) within any given 15-minute performance data collection interval. If the value of Severely Errored Seconds in a particular 15-minute collection interval reaches/exceeds this value, an hdsl2ShdslPerfSESThresh MAY be generated. At most, one notification will be sent per interval per endpoint.rw Hdsl2ShdslPerfIntervalThreshold UNITS "seconds" .1.3.6.1.2.1.10.48.1.11.1.5 |
hdsl2ShdslEndpointThreshCRCanomaliesThis object configures the threshold for the number of CRC anomalies within any given 15-minute performance data collection interval. If the value of CRC anomalies in a particular 15-minute collection interval reaches/exceeds this value, an hdsl2ShdslPerfCRCanomaliesThresh MAY be generated. At most, one notification will be sent per interval per endpoint.rw Integer32 UNITS "detected CRC Anomalies" .1.3.6.1.2.1.10.48.1.11.1.6 |
hdsl2ShdslEndpointThreshLOSWSThis object configures the threshold for the number of Loss of Sync Word (LOSW) Seconds within any given 15-minute performance data collection interval. If the value of LOSW in a particular 15-minute collection interval reaches/exceeds this value, an hdsl2ShdslPerfLOSWSThresh MAY be generated. At most, one notification will be sent per interval per endpoint.rw Hdsl2ShdslPerfIntervalThreshold UNITS "seconds" .1.3.6.1.2.1.10.48.1.11.1.7 |
hdsl2ShdslEndpointThreshUASThis object configures the threshold for the number of Unavailable Seconds (UAS) within any given 15-minute performance data collection interval. If the value of UAS in a particular 15-minute collection interval reaches/exceeds this value, an hdsl2ShdslPerfUASThresh MAY be generated. At most, one notification will be sent per interval per endpoint.rw Hdsl2ShdslPerfIntervalThreshold UNITS "seconds" .1.3.6.1.2.1.10.48.1.11.1.8 |
hdsl2ShdslEndpointAlarmConfProfileRowStatusThis object controls creation/deletion of the associated entry in this table as per the semantics of RowStatus. If an active entry is referenced in either hdsl2ShdslSpanConfAlarmProfile or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain active until all references are removed.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.10.48.1.11.1.9 |
hdsl2ShdslConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.48.3 |
hdsl2ShdslGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.48.3.1 |
hdsl2ShdslSpanConfGroupThis group supports objects for configuring span-related parameters for HDSL2/SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.1 |
hdsl2ShdslSpanStatusGroupThis group supports objects for retrieving span-related status for HDSL2/SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.2 |
hdsl2ShdslInventoryShdslGroupThis group supports objects for retrieving SHDSL-specific inventory information. Unknown .1.3.6.1.2.1.10.48.3.1.3 |
hdsl2ShdslSpanShdslStatusGroupThis group supports objects for retrieving SHDSL-specific span-related status. Unknown .1.3.6.1.2.1.10.48.3.1.4 |
hdsl2ShdslInventoryGroupThis group supports objects that provide unit inventory information about the units in HDSL2/SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.5 |
hdsl2ShdslEndpointConfGroupThis group supports objects for configuring parameters for segment endpoints in HDSL2/SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.6 |
hdsl2ShdslEndpointCurrGroupThis group supports objects that provide current status and performance measurements relating to segment endpoints in HDSL2/SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.7 |
hdsl2Shdsl15MinIntervalGroupThis group supports objects that maintain historic performance measurements relating to segment endpoints in HDSL2/SHDSL lines in 15-minute intervals. Unknown .1.3.6.1.2.1.10.48.3.1.8 |
hdsl2Shdsl1DayIntervalGroupThis group supports objects that maintain historic performance measurements relating to segment endpoints in HDSL2/SHDSL lines in 1-day intervals. Unknown .1.3.6.1.2.1.10.48.3.1.9 |
hdsl2ShdslMaintenanceGroupThis group supports objects that provide support for maintenance actions for HDSL2/SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.10 |
hdsl2ShdslEndpointAlarmConfGroupThis group supports objects that allow configuration of alarm thresholds for various performance parameters for HDSL2/SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.11 |
hdsl2ShdslNotificationGroupThis group supports notifications of significant conditions associated with HDSL2/SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.12 |
hdsl2ShdslSpanConfProfileGroupThis group supports objects that constitute configuration profiles for configuring span-related parameters in SHDSL lines. Unknown .1.3.6.1.2.1.10.48.3.1.13 |
hdsl2ShdslWirePairGroupThis group supports objects that provide the status of SHDSL-specific wire pairs. Unknown .1.3.6.1.2.1.10.48.3.1.14 |
hdsl2ShdslPayloadRateGroupThis group supports objects for retrieving payload rates that exclude any framing overhead. Unknown .1.3.6.1.2.1.10.48.3.1.15 |
hdsl2ShdslCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.48.3.2 |
hdsl2ShdslLineMibComplianceThe compliance statement for SNMP entities that implement HDSL2 and SHDSL. The version of SHDSL supported in this compliance statement is g.shdsl. **** This compliance statement is deprecated. ****deprecated Unknown .1.3.6.1.2.1.10.48.3.2.1 |
hdsl2GshdslbisLineMibComplianceThe compliance statement for SNMP entities that implement HDSL2 and SHDSL. The version of SHDSL supported in this compliance statement is g.shdsl.bis. Unknown .1.3.6.1.2.1.10.48.3.2.2 |