PDN-SONETEXT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
Imported Objects
Objects
10 total| Object Name |
|---|
devSonetConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.13.1 |
IMPORTS Unknown .1.3.6.1.4.1.1795.2.24.2.6.13.1 |
devSonetConfigTableThe Paradyne Sonet-MIB Table Augment. SEQUENCE OF DevSonetConfigEntry .1.3.6.1.4.1.1795.2.24.2.6.13.1.1 |
devSonetConfigEntryAn entry in the Paradyne Sonet-MIB Interface Config Table. DevSonetConfigEntry .1.3.6.1.4.1.1795.2.24.2.6.13.1.1.1 |
devSonetIfIndexThe index value which uniquely identifies the
interface for which this entry contains information
on interface tests. The interface identified by a
particular value of this index is the same interface
as identified by the same value of ifIndex from the
Interfaces table of MIB II (RFC 1213).ro INTEGER .1.3.6.1.4.1.1795.2.24.2.6.13.1.1.1.1 |
devSonetXmitClkSrcThis object is used to configure the clock to be used by the transmit
side of the interface.
loopTiming
OC-N signal and re-used on the Transmitting
OC-N signal. Thats is the timing is
supplied by the far-end OC-N interface.
localTiming
throughTiming
and used by the transmitted signal on another
OC-N interface.
systemTiming
system timing (devCfgClkSource)rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.13.1.1.1.2 |
devSonetStatusLastChangeThe value of MIB II's sysUpTime object at the
time this Sonet entered its current line status
state. If the current state was entered prior to
the last re-initialization of the proxy-agent,
then this object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1795.2.24.2.6.13.1.1.1.3 |
devSonetStatusChangeTrapEnableIndicates whether devSonetStatusChange traps
should be generated for this interface.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.13.1.1.1.4 |
devSonetTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.13.2 |
devSonetStatusChangeA devSonetStatusChange trap is sent when the
value of an instance of sonetSectionCurrentStatus
or sonetLineCurrentStatus or sonetPathCurrentStatus changes.
It can be utilized by an NMS to trigger polls. When
the line status change results in a lower level
line status change (i.e. sonet), then no traps for
the lower level are sent. TRAP-TYPE .1.3.6.1.4.1.1795.2.24.2.6.13.2.0.1 |
More MIBs from Pdyn
Browse all PdynMIBs →Standard SNMP MIB module defining data structures for PDN-HEADER-MIB.
Standard SNMP MIB module defining data structures for HOTWIRE-MSDSL-INTERFACE-MIB.
The PDN-DSL-ATM-BOND-MIB manages Paradyne Networks hardware to aggregate multiple DSL physical links into a single logical interface for transporting ATM streams, monitoring bonding session states and aggregate throughput metrics. This module provides vendor-specific visibility into multi-pair bonding configurations where standardized IETF or ATM Forum MIBs were unavailable, tracking the operational status and performance of the bonded ATM transport layer.
The PDN-CONTROL-MIB facilitates remote device reset operations and firmware or configuration file management on DSLAM hardware via SNMP. It provides the necessary control objects to execute system reboots and manage the storage and retrieval of critical operational binaries and settings.
SNMP MIB module
The PDN-ADSL-LINE-EXT-MIB extends standard ADSL-LINE-MIB definitions to monitor non-standard ADSL2 and ADSL2plus physical layer parameters and operational states on Paradyne DSLAM hardware. This module provides temporary vendor-specific visibility into line modulation modes, error counters, and signal quality metrics required for managing next-generation ADSL technologies before IETF standardization was completed.