PDN-ATM-BRIDGE-IWF-MIB
The PDN-ATM-BRIDGE-IWF-MIB provides management objects for monitoring and controlling the operational state, traffic statistics, and configuration parameters of ATM-to-Bridge Interworking Functions within Packet Data Network (PDN) environments. It enables administrators to track interworking session status, cell loss, and interface performance metrics specific to the conversion between ATM and bridged Ethernet traffic.
Imported Objects
Objects
14 total| Object Name |
|---|
pdnAtmBridgeIwfMIBThis MIB contains objects that are used for monitoring and controlling the ATM/Bridge Interworking Function. MODULE-IDENTITY .1.3.6.1.4.1.1795.2.24.2.43 |
pdnAtmBridgeIwfNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.43.0 |
pdnAtmBridgeIwfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.43.1 |
pdnAtmBridgeIwfTableThis table allows mapping of ATM VCs to Bridge Ports. SEQUENCE OF PdnAtmBridgeIwfEntry .1.3.6.1.4.1.1795.2.24.2.43.1.1 |
pdnAtmBridgeIwfEntryAn entry in the pdnAtmBridgeIwfTable. PdnAtmBridgeIwfEntry .1.3.6.1.4.1.1795.2.24.2.43.1.1.1 |
pdnAtmBridgeIwfVclVpiThe VPI value of the VPL. Unsigned32 .1.3.6.1.4.1.1795.2.24.2.43.1.1.1.1 |
pdnAtmBridgeIwfVclVciThe VCI value of the VCL. Unsigned32 .1.3.6.1.4.1.1795.2.24.2.43.1.1.1.2 |
pdnAtmBridgeIwfRowStatusThe SNMP RowStatus of the current row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1795.2.24.2.43.1.1.1.3 |
pdnAtmBridgeIwfDot1dBasePortThis object specifies the bridge port the VPI/VCI maps to.rw Unsigned32 .1.3.6.1.4.1.1795.2.24.2.43.1.1.1.4 |
pdnAtmBridgeIwfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.43.2 |
pdnAtmBridgeIwfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.43.2.1 |
pdnAtmBridgeIwfMIBComplianceThe compliance statement for pdnAtmBridgeIwf entities which implement the pdnAtmBridgeIwfMIB. Unknown .1.3.6.1.4.1.1795.2.24.2.43.2.1.1 |
pdnAtmBridgeIwfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.43.2.2 |
pdnAtmBridgeIwfGroupObjects grouped for ATM to Bridge Port Mapping. Unknown .1.3.6.1.4.1.1795.2.24.2.43.2.2.1 |
More MIBs from Pdyn
Browse all PdynMIBs →Standard SNMP MIB module defining data structures for PDN-HEADER-MIB.
Standard SNMP MIB module defining data structures for HOTWIRE-MSDSL-INTERFACE-MIB.
The PDN-DSL-ATM-BOND-MIB manages Paradyne Networks hardware to aggregate multiple DSL physical links into a single logical interface for transporting ATM streams, monitoring bonding session states and aggregate throughput metrics. This module provides vendor-specific visibility into multi-pair bonding configurations where standardized IETF or ATM Forum MIBs were unavailable, tracking the operational status and performance of the bonded ATM transport layer.
The PDN-CONTROL-MIB facilitates remote device reset operations and firmware or configuration file management on DSLAM hardware via SNMP. It provides the necessary control objects to execute system reboots and manage the storage and retrieval of critical operational binaries and settings.
SNMP MIB module
The PDN-ADSL-LINE-EXT-MIB extends standard ADSL-LINE-MIB definitions to monitor non-standard ADSL2 and ADSL2plus physical layer parameters and operational states on Paradyne DSLAM hardware. This module provides temporary vendor-specific visibility into line modulation modes, error counters, and signal quality metrics required for managing next-generation ADSL technologies before IETF standardization was completed.