Home/Catalog/PDN-IGMP-STD-EXT-MIB

PDN-IGMP-STD-EXT-MIB

This MIB module is a supplement to the IGMP-STD-MIB.
Main OID:
pdnIgmpStdExtMIB.1.3.6.1.4.1.1795.2.24.2.47
33
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

33 total
Object Name
pdnIgmpStdExtMIBThis MIB module is a supplement to the IGMP-STD-MIB.
MODULE-IDENTITY
.1.3.6.1.4.1.1795.2.24.2.47
pdnIgmpStdExtNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.0
pdnIgmpStdExtObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.1
pdnIgmpInterfaceExtTableThis table extends the igmpInterfaceTable.
SEQUENCE OF PdnIgmpInterfaceExtEntry
.1.3.6.1.4.1.1795.2.24.2.47.1.1
pdnIgmpInterfaceExtEntryAn extended entry in the igmpInterfaceTable. Each entry corresonds to a particular interface.
PdnIgmpInterfaceExtEntry
.1.3.6.1.4.1.1795.2.24.2.47.1.1.1
pdnIgmpInterfaceSnoopEnableDisableThis object specifies whether or not IGMP Snooping is enabled or disabled. enabled(1) - IGMP Snooping is Enabled disabled(2) - IGMP Snooping is Disabledrw
SwitchState (PDN-TC)
.1.3.6.1.4.1.1795.2.24.2.47.1.1.1.1
pdnIgmpInterfaceLeaveDelayThis object specifies the leave-delay period. This value is defened as the period of time during which a multicast stream will continue to be forwarded on an interface after receipt of an IGMP leave message for that stream.rw
Unsigned32
.1.3.6.1.4.1.1795.2.24.2.47.1.1.1.2
pdnIgmpInterfaceLeaveJoinForwardingDelayThis object specifies the leave-join-delay period. This value is defined as the period of time during which new multicast streams will not be forwarded on a port following the receipt of an IGMP Leave message.rw
Unsigned32
.1.3.6.1.4.1.1795.2.24.2.47.1.1.1.3
pdnIgmpCacheExtTableThis table extends the igmpCacheTable.
SEQUENCE OF PdnIgmpCacheExtEntry
.1.3.6.1.4.1.1795.2.24.2.47.1.2
pdnIgmpCacheExtEntryAn extended entry in the igmpCacheTable. Each entry corresonds to a particular IP Multicast Group Destination Address on a particular interface.
PdnIgmpCacheExtEntry
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1
pdnIgmpCacheStatsMulticastPktsInThe total number of IP Multicast packets received excluding IGMP messages.ro
Counter32
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1.1
pdnIgmpCacheStatsMulticastPktsOutThe total number of IP Multicast packets transmitted excluding IGMP messages.ro
Counter32
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1.2
pdnIgmpCacheStatsIgmpQueriesInThe total number of IGMP Query messages received.ro
Counter32
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1.3
pdnIgmpCacheStatsIgmpQueriesOutThe total number of IGMP Query messages transmitted.ro
Counter32
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1.4
pdnIgmpCacheStatsIgmpReportsInThe total number of IGMP Report messages received.ro
Counter32
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1.5
pdnIgmpCacheStatsIgmpReportsOutThe total number of IGMP Report messages transmitted.ro
Counter32
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1.6
pdnIgmpCacheStatsIgmpLeavesInThe total number of IGMP Leave messages received.ro
Counter32
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1.7
pdnIgmpCacheStatsIgmpLeavesOutThe total number of IGMP Leave messages transmitted.ro
Counter32
.1.3.6.1.4.1.1795.2.24.2.47.1.2.1.8
pdnIgmpSnoopingSelectionThis object specifies whether or not IGMP Snooping is enabled or disabled on a system-wide basis. enabled(1) - IGMP Snooping is Enabled on the device disabled(2) - IGMP Snooping is Disabled on the devicerw
SwitchState (PDN-TC)
.1.3.6.1.4.1.1795.2.24.2.47.1.3
pdnIgmpGeneralQueryIntervalThis object is similar to the igmpInterfaceQueryInterval object defined in RFC2933. However, it can be used to set a global value that applies to all the interfaces in the system with IGMP enabled. A value of zero disables this option and thus the agent shall employ the value configured in the igmpInterfaceQueryInterval for each interface running IGMP. In the other hands, if this object is set to a value greater than zero, the value takes precedence over the value configured in the igmpInterfaceQueryInterval for that interface.rw
Unsigned32 UNITS "seconds"
.1.3.6.1.4.1.1795.2.24.2.47.1.4
pdnIgmpStdExtAFNs
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.2
pdnIgmpStdExtConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.3
pdnIgmpStdExtCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.3.1
pdnIgmpStdExtMIBComplianceThe compliance statement for IP Multicast products which implement the pdnIpMcaseMIB.deprecated
Unknown
.1.3.6.1.4.1.1795.2.24.2.47.3.1.1
pdnIgmpStdExtMIBComplianceV2The compliance statement for Ip products which implement the IGMP protocol.
Unknown
.1.3.6.1.4.1.1795.2.24.2.47.3.1.2
pdnIgmpStdExtGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.3.2
pdnIgmpStdExtObjGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.3.2.1
pdnIgmpStdExtConfigGroupObjects grouped for configuring IP Multicast and IGMP parameters.
Unknown
.1.3.6.1.4.1.1795.2.24.2.47.3.2.1.1
pdnIgmpStdExtStatsGroupObjects grouped for IP Multicast and IGMP Statistics.
Unknown
.1.3.6.1.4.1.1795.2.24.2.47.3.2.1.2
pdnIgmpStdExtGeneralConfigGroupObjects grouped for general configuring of IP Multicast and IGMP parameters. This group has been deprecated in favor of pdnIgmpStdExtGeneralConfigGroupV2.deprecated
Unknown
.1.3.6.1.4.1.1795.2.24.2.47.3.2.1.3
pdnIgmpStdExtGeneralConfigGroupV2Objects grouped for general configuring of IP Multicast and IGMP parameters.
Unknown
.1.3.6.1.4.1.1795.2.24.2.47.3.2.1.4
pdnIgmpStdExtAfnGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.3.2.2
pdnIgmpStdExtNtfyGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.1795.2.24.2.47.3.2.3

More MIBs from Pdyn

Browse all PdynMIBs →
PDN-HEADER-MIB

Standard SNMP MIB module defining data structures for PDN-HEADER-MIB.

540 objects→
HOTWIRE-MSDSL-INTERFACE-MIB

Standard SNMP MIB module defining data structures for HOTWIRE-MSDSL-INTERFACE-MIB.

134 objects→
PDN-DSL-ATM-BOND-MIB

The PDN-DSL-ATM-BOND-MIB manages Paradyne Networks hardware to aggregate multiple DSL physical links into a single logical interface for transporting ATM streams, monitoring bonding session states and aggregate throughput metrics. This module provides vendor-specific visibility into multi-pair bonding configurations where standardized IETF or ATM Forum MIBs were unavailable, tracking the operational status and performance of the bonded ATM transport layer.

122 objects→
PDN-CONTROL-MIB

The PDN-CONTROL-MIB facilitates remote device reset operations and firmware or configuration file management on DSLAM hardware via SNMP. It provides the necessary control objects to execute system reboots and manage the storage and retrieval of critical operational binaries and settings.

115 objects→
PDN-CP-IWF-MIB

SNMP MIB module

102 objects→
PDN-ADSL-LINE-EXT-MIB

The PDN-ADSL-LINE-EXT-MIB extends standard ADSL-LINE-MIB definitions to monitor non-standard ADSL2 and ADSL2plus physical layer parameters and operational states on Paradyne DSLAM hardware. This module provides temporary vendor-specific visibility into line modulation modes, error counters, and signal quality metrics required for managing next-generation ADSL technologies before IETF standardization was completed.

97 objects→