PDN-DS1EXT-MIB
Imported Objects
Objects
15 total| Object Name |
|---|
pdnDs1ExtThe Paradyne enterprise DS1/G.703 extension MIB. This MIB provides additional DS1 and G.703 (E1) configuration objects not provided by rfc2495. MODULE-IDENTITY .1.3.6.1.4.1.1795.2.24.2.6.5.5 |
pdnDs1ExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.5.5.1 |
pdnDs1ExtConfTableThe Paradyne DS1/G.703 extension configuration table. This table is used for configuring extensions to DS1 and G.703 interfaces. SEQUENCE OF PdnDs1ExtConfEntry .1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1 |
pdnDs1ExtConfEntryAn entry in the Paradyne DS1/G.703 extension configuration table. Note: The objects used depend on the type of interface. For DS1: use pdnDs1ExtConfLineLengthType and one of (pdnDs1ExtConfLineLength or pdnDs1ExtConfLineBuildOut) For G.703: use pdnDs1ExtConfLineLengthType and pdnDs1ExtConfConnector PdnDs1ExtConfEntry .1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1 |
pdnDs1ExtConfLineLengthTypeThis entry specifies the type of loop length for the interface. short-haul is intended for intra-building use. long-haul is intended for inter-building use.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.1 |
pdnDs1ExtConfLineLengthThis entry specifies the loop length, in feet, for a short-haul DS1 line. This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineBuildOut object i.e. only one of the two can be used for configuration at one time, based on the pdnDs1ExtConfLineLengthType object.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2 |
pdnDs1ExtConfLineBuildOutThis entry specifies the line build out, in decibels, for a long-haul DS1 line. dB0Pnt0 = 0.0 dB dB7Pnt5 = -7.5 dB dB15Pnt0 = -15.0 dB dB22Pnt5 = -22.5 dB This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineLength object i.e. only one of the two can be used for configuration at one time, based on the pdnDs1ExtConfLineLengthType object.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3 |
pdnDs1ExtConfConnectorThis entry specifies the type of connector to be used. This object only applies to G.703 interfaces. bnc: 75-Ohm connector supporting only short-haul. rj48: 120-Ohm connector supporting both short-haul and long-haul.rw Enumeration .1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4 |
pdnDs1ExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.5.5.2 |
pdnDs1ExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1 |
pdnDs1ExtT1ConfigGroupA collection of configuration objects required for configuring a T1 interface. Unknown .1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1.1 |
pdnDs1ExtE1ConfigGroupA collection of configuration objects required for configuring a G.703 (E1) interface. Unknown .1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1.2 |
pdnDs1ExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2 |
pdnDs1ExtComplianceCompliance statement for using this MIB for configuring DS1 interfaces. Unknown .1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2.1 |
pdnDs1ExtG703ComplianceCompliance statement for using this MIB for configuring G.703 interfaces. Unknown .1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2.2 |
More MIBs from Pdyn
Browse all PdynMIBs →Standard SNMP MIB module defining data structures for PDN-HEADER-MIB.
Standard SNMP MIB module defining data structures for HOTWIRE-MSDSL-INTERFACE-MIB.
The PDN-DSL-ATM-BOND-MIB manages Paradyne Networks hardware to aggregate multiple DSL physical links into a single logical interface for transporting ATM streams, monitoring bonding session states and aggregate throughput metrics. This module provides vendor-specific visibility into multi-pair bonding configurations where standardized IETF or ATM Forum MIBs were unavailable, tracking the operational status and performance of the bonded ATM transport layer.
The PDN-CONTROL-MIB facilitates remote device reset operations and firmware or configuration file management on DSLAM hardware via SNMP. It provides the necessary control objects to execute system reboots and manage the storage and retrieval of critical operational binaries and settings.
SNMP MIB module
The PDN-ADSL-LINE-EXT-MIB extends standard ADSL-LINE-MIB definitions to monitor non-standard ADSL2 and ADSL2plus physical layer parameters and operational states on Paradyne DSLAM hardware. This module provides temporary vendor-specific visibility into line modulation modes, error counters, and signal quality metrics required for managing next-generation ADSL technologies before IETF standardization was completed.