PDN-MPD-EXT-MIB
Imported Objects
Objects
8 total| Object Name |
|---|
pdnMpdExtMIBThis management information module supports the objects that extend the Message Processing Dispatcher mib as described in rfc3412_std62_a.mib. MODULE-IDENTITY .1.3.6.1.4.1.1795.2.24.2.44.1 |
pdnMpdExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.44.1.1 |
pdnMpdExtSecurityModeConfigThis object is used to configure the level of SNMP access that the agent supports. That is, which combinations of Model Processing can be dispatched and what security levels are supported for those models. An agent can choose to support more than a single combination of modes, (e.g., SNMPv1 and SNMPv2 with noAuthNoPriv) or choose to support a single option (e.g., a very secured agent with only SNMPv3 with authentication and privacy enabled.). Even some of these combinations may not be supported at all. Setting this object to a valid value will cause the entries associated with those Models and SecurityLevels being changed to become active/inactive in tables processed by the SNMPv3 Framework.rw PdnMpdExtSecurityMode .1.3.6.1.4.1.1795.2.24.2.44.1.1.1 |
pdnMpdExtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.44.1.2 |
pdnMpdExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.44.1.2.1 |
pdnMpdExtComplianceThe compliance statement for MPD extension mib. Unknown .1.3.6.1.4.1.1795.2.24.2.44.1.2.1.1 |
pdnMpdExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.44.1.2.2 |
pdnMpdExtGroupA collection of configuration objects applicable to MPD extention. Unknown .1.3.6.1.4.1.1795.2.24.2.44.1.2.2.1 |
More MIBs from Pdyn
Browse all PdynMIBs →Standard SNMP MIB module defining data structures for PDN-HEADER-MIB.
Standard SNMP MIB module defining data structures for HOTWIRE-MSDSL-INTERFACE-MIB.
The PDN-DSL-ATM-BOND-MIB manages Paradyne Networks hardware to aggregate multiple DSL physical links into a single logical interface for transporting ATM streams, monitoring bonding session states and aggregate throughput metrics. This module provides vendor-specific visibility into multi-pair bonding configurations where standardized IETF or ATM Forum MIBs were unavailable, tracking the operational status and performance of the bonded ATM transport layer.
The PDN-CONTROL-MIB facilitates remote device reset operations and firmware or configuration file management on DSLAM hardware via SNMP. It provides the necessary control objects to execute system reboots and manage the storage and retrieval of critical operational binaries and settings.
SNMP MIB module
The PDN-ADSL-LINE-EXT-MIB extends standard ADSL-LINE-MIB definitions to monitor non-standard ADSL2 and ADSL2plus physical layer parameters and operational states on Paradyne DSLAM hardware. This module provides temporary vendor-specific visibility into line modulation modes, error counters, and signal quality metrics required for managing next-generation ADSL technologies before IETF standardization was completed.