PDN-ATMEXT-MIB
AI MIB Summary
The PDN-ATMEXT-MIB extends the standard ATM-MIB to monitor and manage Packet Data Network (PDN) specific Asynchronous Transfer Mode (ATM) interfaces, providing visibility into PDN session states, virtual circuit statistics, and ATM layer performance metrics for carrier-grade network equipment.
This MIB Module extends the ATM-MIB defined in rfc2515
Main OID:
pdnAtmExtMIB.1.3.6.1.4.1.1795.2.24.2.6.11.5
42
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
42 total| Object Name |
|---|
pdnAtmExtMIBThis MIB Module extends the ATM-MIB defined in rfc2515 MODULE-IDENTITY .1.3.6.1.4.1.1795.2.24.2.6.11.5 |
pdnAtmExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.1 |
pdnAtmIfConfExtTableThe Paradyne Extension to the atmInterfaceConfTable of the ATM-MIB. SEQUENCE OF PdnAtmIfConfExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1 |
pdnAtmIfConfExtEntryAn entry in the Paradyne Extension to the atmInterfaceConfTable of
the ATM-MIB. PdnAtmIfConfExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1 |
pdnAtmIfConfExtVbrRtBandwidthUtilThe bandwidth utilization for realtime vbr type traffic
expressed as a percentage.rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.1 |
pdnAtmIfConfExtVbrNrtBandwidthUtilThe bandwidth utilization for non-realtime VBR type traffic
expressed as a percentage.rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.2 |
pdnAtmIfConfExtHecErrorThresholdThe value of this object represents the threshold value for
the number of uncrorrectable HEC errors in a 15 minutes interval.
An SNMP link Up/Down trap would be generated if the number of
uncorrectable HEC errors in a 15 minutes interval exceeds this threshold.
The valid range of this object is 0 to 1000. A value of 0 will cause
a trap to be sent on each occurrence of a HEC error. A value of
-9999 disables the threshold check.
The default value for this object is 100.rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.3 |
pdnAtmIfConfExtUnknownCellThresholdThe value of this object represents the threshold value for
the number of unknown cells in a 15 minutes interval.
An SNMP trap would be generated if the number of unknown
cell in a 15 minutes interval exceeds this threshold.
The valid range of this object is 0 to 1000. A value of 0 will
cause a trap to be sent on each occurrence of an unknown cell.
A value of -9999 disables the threshold check.
The default value for this object is 10rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.4 |
pdnAtmIfConfExtOcdEventThresholdThe value of this object represents the threshold value for
the number of Out of Cell Delineation(OCD) events in a 15
minutes interval. An SNMP trap would be generated if the number
of OCD events in a 15 minutes interval exceeds this threshold.
The valid range of this object is 0 to 1000. A value of 0 will
cause a trap to be sent on each occurrence of a HEC error.
A value of -9999 disables the threshold check.
The default value for this object is 0rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.5 |
pdnAtmIfConfExtBandwidthUtilCbrReservedThis object specifies the percent of the interface bandwidth to
be allocated to the CBR traffic class.rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.6 |
pdnAtmIfConfExtBandwidthUtilCbrAssignedThis object specifies the percent of bandwidth utilization
(sometimes reffered to as over subscription) the connection
Addmission Control algorithm has already allowed for the CBR class
of service.ro Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.7 |
pdnAtmIfConfExtBandwidthUtilVbrRtReservedThis object specifies the percent of the interface bandwidth to
be allocated to the VBR-rt traffic class.rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.8 |
pdnAtmIfConfExtBandwidthUtilVbrRtAssignedThis object specifies the percent of bandwidth utilization
(sometimes reffered to as over subscription) the connection
Addmission Control algorithm has already allowed for the VBR-rt class
of service.ro Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.9 |
pdnAtmIfConfExtBandwidthUtilVbrNrtReservedThis object specifies the percent of the interface bandwidth to
be allocated to the VBR-nrt traffic class.rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.10 |
pdnAtmIfConfExtBandwidthUtilVbrNrtAssignedThis object specifies the percent of bandwidth utilization
(sometimes reffered to as over subscription) the connection
Addmission Control algorithm has already allowed for the VBR-nrt class
of service.ro Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.11 |
pdnAtmIfConfExtBandwidthUtilUbrReservedThis object specifies the percent of the interface bandwidth to
be allocated to the UBR traffic class.rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.12 |
pdnAtmIfConfExtBandwidthUtilUbrAssignedThis object specifies the percent of bandwidth utilization
(sometimes reffered to as over subscription) the connection
Addmission Control algorithm has already allowed for the UBR class
of service.ro Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.13 |
pdnAtmIfConfExtRateShapeThis object is used to specify rate shaping on this interface.
The valid range of this object is 512 to 46080 [512K..46Mbps]
with increments of 64K. The default value will be set depending
on the interface.rw Integer32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.14 |
pdnAtmTrafficDescrParamExtTableThe Paradyne Extension to the atmTrafficDescrParamTable of the ATM-MIB. SEQUENCE OF PdnAtmTrafficDescrParamExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2 |
pdnAtmTrafficDescrParamExtEntryAn entry in the Paradyne Extension to the atmTrafficDescrParamTable
of the ATM-MIB. PdnAtmTrafficDescrParamExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2.1 |
pdnAtmTrafficDescrParamNameThe value of this Object identifies the traffic descriptor by a
by a name.rw DisplayString .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2.1.1 |
pdnAtmTrafficPolicingThe value of this Object determines whether or not
the vcl/vpl to which this traffic descriptor
is bound will be policedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2.1.2 |
pdnAtmTrafficShapingThe value of this Object determines whether or not
the vcl/vpl to which this traffic descriptor
is bound will be rate shaped to the specified
traffic contractrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2.1.3 |
pdnAal5VccExtTableThe Paradyne Extension to the aal5VccTable in the ATM-MIB. SEQUENCE OF PdnAal5VccExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.3 |
pdnAal5VccExtEntryAn entry in the Paradyne Extension to the aal5VccTable.
in the ATM-MIB. PdnAal5VccExtEntry .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.3.1 |
pdnAal5VccExtOutPDUsThe total number of AAL5 CPCS PDUs transmitted on the
interface associated with an AAL5 entry.ro Unsigned32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.3.1.1 |
pdnAal5VccExtInPDUsThis total number of AAL5 CPCS PDUs transmitted on the
interface associated with an AAL5 entry.ro Unsigned32 .1.3.6.1.4.1.1795.2.24.2.6.11.5.1.3.1.2 |
pdnAtmExtMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.2 |
pdnAtmExtMIBTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0 |
pdnAtmIfConfExtExcessInvalidCellsAlarmThis alarm indicates that the number of cells with
uncorrectable HEC erros has exceeded the used defined
the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.1 |
pdnAtmIfConfExtEgressLineRateAlarmSetThis alarm indicates that the line rate of the specified
interface has dropped below a value which violates the
traffic contracts of the admitted connections in the egress
(transmit) direction NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.2 |
pdnAtmIfConfExtVplNoBandwidthAvailThis alarm indicates that the traffic contract(s)
associated with the Virtual Path (VP) Cross Connect
cannot be satisfied by the ATM switch.
It is left upto the implementation to decide whether or
not the VP cross connect will be admitted NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.3 |
pdnAtmIfConfExtVclNoBandwidthAvailThis alarm indicates that the traffic contract(s)
associated with the Virtual Channel (VC) Cross Connect
cannot be satisfied by the ATM switch.
It is left upto the implementation to decide whether or
not the VC cross connect will be admitted NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.4 |
pdnAtmIfConfExtIngressLineRateAlarmSetThis alarm indicates that the line rate of the specified
interface has dropped below a value which violates the
traffic contracts of the admitted connections in the ingress
(receive) direction NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.5 |
pdnAtmIfConfExtEgressLineRateAlarmClearThis alarm indicates that the line rate of the specified
interface has risen above a value which would no longer violate the
traffic contracts of the admitted connections in the egress
(transmit) direction NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.102 |
pdnAtmIfConfExtIngressLineRateAlarmClearThis alarm indicates that the line rate of the specified
interface has risen above a value which would no longer violate the
traffic contracts of the admitted connections in the ingress
(receive) direction NOTIFICATION-TYPE .1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.105 |
pdnAtmExtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.3 |
pdnAtmExtMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.3.1 |
pdnAtmExtMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.3.2 |
pdnAtmExtMIBTrafficDescriptorTypes OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.4 |
pdnAtmNoClpTaggingNoScrCdvtMdcrThis Traffic Descriptor type is for no CLP with tagging
and no Sustained Cell Rate. The Use of the Parameter
Vector for this type:
Parameter 1: Peak Cell Rate in cells/second
CLP=0+1 traffic
Parameter 2: CDVT in tenths of a microsecond
Parameter 3: Minimum Desired Cell Rate in cells/second (<= PCR)
Parameter 4: Tolerance To the MDCR Commitment
(>= 1/MDCR) in milliseconds
Parameter 5: not used
This Traffic Descriptor type is applicable to connections
following the UBR.2 conformance definition OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.4.1 |
pdnAtmNoClpNoScrCdvtMdcrThis Traffic Descriptor type is for no CLP
and no Sustained Cell Rate. The Use of the Parameter
Vector for this type:
Parameter 1: Peak Cell Rate in cells/second
CLP=0+1 traffic
Parameter 2: CDVT in tenths of a microsecond
Parameter 3: Minimum Desired Cell Rate in cells/second (<= PCR)
Parameter 4: Tolerance To the MDCR Commitment
(>= 1/MDCR) in milliseconds
Parameter 5: not used
This Traffic Descriptor type is applicable to connections
following the UBR.1 conformance definition OBJECT IDENTIFIER .1.3.6.1.4.1.1795.2.24.2.6.11.5.4.2 |