MIB Catalog
406 modules loaded — click any MIB to explore
ADVA AG Optical Networking
3Fibronics
1Marconi
40This mib is used to configure channelized operating modes for interfaces that can operate in either channelized or concatenated mode. For now, this is used to support the configuration of the Channeli
Definitions common to all FORE private MIBS.
Fore DS1 mib module for supporting the DS1 port module.
This MIB module supports the FORE DS3 port module.
MIB module for supporting the DSX1 port module.
This mib module implements extensions to the standard DS3 mib to support extra configuration, statistics, and diagnostic capabilities of Fore Systems equipment.
This mib implements management tables for the E1 port module.
write something interesting here
The following two variables are provided as a way of reporting SNMP errors to the management station. The SNMP agent keeps track two variables for each set request (last oid and last error message tha
MIB module
This MIB module defines the FORE Systems generic file transfer information. It provides for a file transfer table. Each table entry contains the information necessary for a device to complete a file t
This is the FRAM netmod proprietory MIB. Currently, this mib defines one table: nmFramNetmodConfTable This table contains configuration information for FRAM netmod.
write something interesting here
MIB module
This MIB module defines the FORE Systems interface table. This table contains information necessary to configure the MTU size of an interface.
This MIB module defines an ifCreateTable to facilitates the creation of FR/ATM and FUNI services. It also defines an ifConversionTable to allow the conversion between service id and service ifindex.
Fore ILMI Registry Module.
This MIB module defines the FORE Systems specific SNMP Proxy information for the ILMI VCI. It provides for an ISP table. Each table entry contains the information necessary for a device to complete an
This MIB defines extensions to the standard ATM-FORUM IMA MIB to facilitate extended IMA configurations supported by Marconi.
write something interesting here
Fore Systems LAN-Emulation MIB
This mib implements management information for the PLCP convergence layer in an atm interface. Typically PLCP framing is used to encapsulate ATM cells for transmission over a DS3/E3 link.
This module implements the FORE Systems extentions to the PNNI MIB.
This MIB module defines several profile tables that facilitate the creation of FR/ATM and FUNI services and connections.
This module specifics Series D Portcard Redundancy table mib objects.
The Fore ASX-4000 redundancy mib.
The implementation of the foreSonet tables is mandatory for all switches that have SONET/SDH port modules.
Synchronization Status Message Module
Shared memory network module.
This mib implements extensions to the standard SONET mib to support extra configuration and statistics that are supported by Fore Systems.
Fore Switch MIB
This mib implements management information for the ATM traffic convergence layer in an atm interface.
The Timing Control Module (TCM).
write something interesting here
This MIB module defines the FORE Systems specific Log information for Traps. It provides for a Log table, Var table and Threshold table. Each Log table entry contains general information on the traps
This MIB module defines the FORE Systems AAL5 and EPD/PPD management interface of the Mercury netmod (FUNI FR/ATM interworking )
This MIB module defines FR/ATM interworking tables. It gives the means to create/remove a FR/ATM interworking connection and provides statistics at the connection level.
This MIB module defines FR/ATM interworking tables. It gives means to create/remove a FR/ATM interworking connection and provides several statistics at connection level.
This MIB is considered as being required in addition to the standard mibs RFC1604 and RFC1315. It provides configuration and statistics information at frame relay service and connection level.
The foreTP25 Module supports all switchs that have the 25.6Mbps UTP/STP port module.