Fore-SSM-MIB
Synchronization Status Message Module
Main OID:
sysStatusMsgModule.1.3.6.1.4.1.326.2.2.2.1.21.4
12
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
12 total| Object Name |
|---|
syncStatusMsgChangedThis trap is generated whenever a configured timing reference's receive SSM changes. It indicates the previous SSM received and the new SSM being received. NOTIFICATION-TYPE .1.3.6.1.4.1.326.2.2.2.1.21.0.1 |
syncStatusMsgTableA table containing Synchronization Status Message configuration and status. SEQUENCE OF SyncStatusMsgEntry .1.3.6.1.4.1.326.2.2.2.1.21.1 |
syncStatusMsgEntryA table entry containing Synchronization Status Message configuration and status. SyncStatusMsgEntry .1.3.6.1.4.1.326.2.2.2.1.21.1.1 |
syncStatusMsgInterfaceName of this SSM Interface. DisplayString .1.3.6.1.4.1.326.2.2.2.1.21.1.1.1 |
syncStatusMsgRxMessageSynchronization Status Message currently being received on this interface. If syncStatusMsgForceRxSsm is set to any value other than SyncStatusMsgType::none, then syncStatusMsgRxMessage will reflect that forced value.ro SyncStatusMsgType .1.3.6.1.4.1.326.2.2.2.1.21.1.1.2 |
syncStatusMsgTxMessageSynchronization Status Message being transmitted on this interface. If syncStatusMsgForceDus is set to enabled, then syncStatusMsgTxMessage will be Don't Use for Synchronization(DUS).ro SyncStatusMsgType .1.3.6.1.4.1.326.2.2.2.1.21.1.1.3 |
syncStatusMsgForceRxSsmThis variable is used to force a particual Synchronization Status Message as the receive SSM on this interface. Forcing a receive SSM will cause the interface to ignore the actual SSM being received (i.e., changes to S1 byte.) Setting this variable to SyncStatusMsgType::none will clear any forced SSM.rw SyncStatusMsgType .1.3.6.1.4.1.326.2.2.2.1.21.1.1.4 |
syncStatusMsgForceDusIndicates if Don't Use for Synchronization (DUS) is being forced on the transmit side of this interface. If this variable is set to enabled, then the switch will generate DUS message on the transmit side of the interface. Otherwise, the switch will transmit an appropriate value according to the SSM protocol.rw Enumeration .1.3.6.1.4.1.326.2.2.2.1.21.1.1.5 |
syncStatusMsgPrevRxMessageSynchronization Status Message previously received on this interface. This variable is used by syncStatusMsgChanged trap.ro SyncStatusMsgType .1.3.6.1.4.1.326.2.2.2.1.21.1.1.6 |
syncStatusMsgAutomaticRefSwitchingIndicates whether or not changes in SSM will cause automatic reference switching. If the variable is set to enabled, the switch will process and react to changes in SSM. If the variable is set to disabled, changes in SSM will not cause timing reference switching. Default value is disabled.rw Enumeration .1.3.6.1.4.1.326.2.2.2.1.21.2 |
syncStatusMsgSdhOptionIndicates the SSM Option being used on SDH/E1 interfaces. Default value is optionII.rw Enumeration .1.3.6.1.4.1.326.2.2.2.1.21.3 |
sysStatusMsgModuleSynchronization Status Message Module MODULE-IDENTITY .1.3.6.1.4.1.326.2.2.2.1.21.4 |