ES1200-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
364
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
364 total| Object Name |
|---|
fore OBJECT IDENTIFIER .1.3.6.1.4.1.326 |
IMPORTS Unknown .1.3.6.1.4.1.326 |
systems OBJECT IDENTIFIER .1.3.6.1.4.1.326.2 |
ethernet OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20 |
edge OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1 |
edgecommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.1 |
golf OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2 |
golfproducts OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1 |
es1200 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1.2 |
swEventPortPartitionThe trap is sent whenever the port state enter the
Partion mode when more than 61 collisions occur while
trasmitting. TRAP-TYPE .1.3.6.1.4.1.326.2.20.1.2.1.2.0.1 |
swEventlinkChangeEventThe trap is sent whenever the link state of a port changes
from link up to link down or from link down to link up TRAP-TYPE .1.3.6.1.4.1.326.2.20.1.2.1.2.0.2 |
swEventBcastRisingStormThe trap indicates that broadcast higher rising threshold
. This trap including the port ID TRAP-TYPE .1.3.6.1.4.1.326.2.20.1.2.1.2.0.3 |
swEventBcastFallingStormThe trap indicates that broadcast higher falling threshold
. This trap including the port ID TRAP-TYPE .1.3.6.1.4.1.326.2.20.1.2.1.2.0.4 |
golfcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2 |
fore-products OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1 |
fore-es1200Prod OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25 |
swProperty OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.1 |
swModule OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.1.1 |
es1200DevRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.2 |
es1200Device OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.2.1 |
es1200UnitRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.3 |
es1200Master OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.3.1 |
es1210Slave1 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.3.2 |
es1210Slave2 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.3.3 |
es1210Slave3 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.3.4 |
es1200ModuleRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4 |
es1200ModuleMainboardTx OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.1 |
es1200ModuleTxTwoPort OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.2 |
es1200ModuleFxSC OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.3 |
es1200ModuleFxMTRJ OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.4 |
es1200ModuleSIO OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.5 |
es1200ModuleSXGIGAOnePort OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.6 |
es1200ModuleSXGIGATwoPort OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.7 |
es1200ModuleLXGIGAOnePort OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.8 |
es1200ModuleLXGIGATwoPort OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.9 |
es1200ModuleTXGIGAOnePort OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.10 |
es1200ModuleTXGIGATwoPort OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.11 |
es1200ModuleNone OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.4.12 |
es1210ModuleRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.5 |
es1210ModuleMainboardTx OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.5.1 |
es1210ModuleTxTwoPort OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.5.2 |
es1210ModuleFxSC OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.5.3 |
es1210ModuleFxMTRJ OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.5.4 |
es1210ModuleSIO OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.5.5 |
es1210ModuleNone OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.5.6 |
es1200PortRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.6 |
es1200Port-10-100TX OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.6.1 |
es1200Port-100-SC OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.6.2 |
es1200Port-100-MTRJ OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.6.3 |
es1200Port-1000-SX OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.6.4 |
es1200Port-1000-LX OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.6.5 |
es1200Port-1000-TX OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.6.6 |
es1210PortRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.7 |
es1210Port-10-100TX OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.7.1 |
es1210Port-100-SC OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.7.2 |
es1210Port-100-MTRJ OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.7.3 |
es1200PowerSupplyRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.8 |
es1200PowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.8.1 |
es1210PowerSupplyRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.9 |
es1210PowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.9.1 |
es1200FanRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.10 |
es1200Fan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.10.1 |
es1210FanRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.11 |
es1210Fan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.11.1 |
es1200SlotRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.12 |
es1200Slot1 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.12.1 |
es1200Slot2 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.12.2 |
es1200Slot3 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.12.3 |
es1210SlotRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.13 |
es1210Slot1 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.13.1 |
es1210Slot2 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.13.2 |
es1200SensorRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.14 |
es1200BackplaneRegistration OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.25.15 |
fore-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2 |
es1200Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25 |
swStructure OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1 |
swStructInfo OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.1 |
swStructDevTypeSpecifies the device typero OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.1.1 |
swStructDevDescrDescribes the type of the devicero DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.1.2 |
swStructPortEncodingFactorThe factor to encode the global port ID from unit ID and the local port ID.
This global port ID is required to access the bridge MIB and spanning tree MIB
defined by the standard body. This global port ID will provide a unigue port ID for
each port across the entire device.
Example: supoposed that the encoding factor is 24, then port 2 located on unit 2 will
be encoded as port 26ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.1.3 |
swStructUnitTableA table that contains information about a unit in the device. SEQUENCE OF SwStructUnitEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2 |
swStructUnitEntryA list of information for each unit in the device. SwStructUnitEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1 |
swStructUnitIndexID of the unit in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.1 |
swStructUnitTypeType of the unitro OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.2 |
swStructUnitDescrType of the unit in displayed string formatro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.3 |
swStructUnitLedInfoProvides the LED information for the unit.
Master:
byte 0:
bit 0:Condole in Use (0:not used,1:used)
bit 1:Giga module status (0:not exist,1:exist)
bit 2:Giga module port1 status (0:link fail,1:link pass)
bit 3:Giga module port2 status (0:link fail,1:link pass)
bit 4:Slot2 module status (0:not exist,1:exist)
bit 5:Unit slave1 status (0:not exist,1:exist)
bit 6:Unit slave2 status (0:not exist,1:exist)
bit 7:Unit slave3 status (0:not exist,1:exist)
byte 1:
bit 0:Slot1 module port1 nway status (0:10M,1:100M)
bit 1:Slot1 module port1 link status (0:link fail,1:link pass)
bit 2:Slot1 module port2 nway status (0:10M,1:100M)
bit 3:Slot1 module port2 link status (0:link fail,1:link pass)
bit 4:Base module port1 nway status (0:10M,1:100M)
bit 5:Base module port1 link status (0:link fail,1:link pass)
bit 6:Base module port2 nway status (0:10M,1:100M)
bit 7:Base module port2 link status (0:link fail,1:link pass)
byte 2:
bit 0:Base module port3 nway status (0:10M,1:100M)
bit 1:Base module port3 link status (0:link fail,1:link pass)
bit 2:Base module port4 nway status (0:10M,1:100M)
bit 3:Base module port4 link status (0:link fail,1:link pass)
bit 4:Base module port5 nway status (0:10M,1:100M)
bit 5:Base module port5 link status (0:link fail,1:link pass)
bit 6:Base module port6 nway status (0:10M,1:100M)
bit 7:Base module port6 link status (0:link fail,1:link pass)
byte 3: ...
.
.
byte 7: ...
Slave:
byte 0:
bit 0:Not used
bit 1:Not used
bit 2:Not used
bit 3:Not used
bit 4:Slot2 module status (0:not exist,1:exist)
bit 5:Unit slave1 status (0:not exist,1:exist)
bit 6:Unit slave2 status (0:not exist,1:exist)
bit 7:Unit slave3 status (0:not exist,1:exist)
byte 1:
bit 0:Slot1 module port1 nway status (0:10M,1:100M)
bit 1:Slot1 module port1 link status (0:link fail,1:link pass)
bit 2:Slot1 module port2 nway status (0:10M,1:100M)
bit 3:Slot1 module port2 link status (0:link fail,1:link pass)
bit 4:Base module port1 nway status (0:10M,1:100M)
bit 5:Base module port1 link status (0:link fail,1:link pass)
bit 6:Base module port2 nway status (0:10M,1:100M)
bit 7:Base module port2 link status (0:link fail,1:link pass)
byte 2: ...
.
.
byte 7: ...ro OCTET STRING .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.4 |
swStructUnitMaxModuleNumMaximum number of modules allowed on the unitro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.5 |
swStructUnitMaxPortNumMaximum number of ports allowed on the unitro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.6 |
swStructUnitNumOfPortInUseNumber of ports which has link being connected to the portro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.7 |
swStructUnitOperStatusDescribes the operation status for the unitro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.8 |
swStructUnitLastChangeProvides the time that the unit is up last timero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.2.1.9 |
swStructModuleTableA table that contains information about a module. SEQUENCE OF SwStructModuleEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3 |
swStructModuleEntryA list of information for a module. SwStructModuleEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1 |
swStructModuleUnitIndexID of the unit in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.1 |
swStructModuleIndexID of the Module in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.2 |
swStructModuleSubMduIndexIf the module doesnot contain sub module, sub module ID is 0. Otherwise,
it indicates the ID of the sub module relative to the modulero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.3 |
swStructModuleTypeType of the modulero OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.4 |
swStructModuleDescrType of the module in displayed string formatro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.5 |
swStructModuleVersionProvides PCB version of the modulero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.6 |
swStructModuleMaxPortNumMaximum number of ports allowed on the modulero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.7 |
swStructModuleEncodingOffsetEach module has a offset for encoding the port ID relative to a unit. This encoding
will provide a unigue port ID for ports located on the device.
Example: supoposed that the offset for module 2 is 21, then port 2 located on
module 2 will be encoded as port 22ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.8 |
swStructModuleOperStatusProvides operation status of the modulero Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.9 |
swStructModuleLastChangeProvides the time that the module is up last timero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.3.1.10 |
swStructPowerTableA table that contains information about every board. SEQUENCE OF SwStructPowerEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.4 |
swStructPowerEntryA list of information for each board of the chassis. SwStructPowerEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.4.1 |
swStructPowerUnitIndexID of the unit in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.4.1.1 |
swStructPowerIndexID of the power supply in the unitro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.4.1.2 |
swStructPowerOperStatusDescribes the operation status of the power supplyro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.4.1.3 |
swStructFanTableA table that contains information about every board. SEQUENCE OF SwStructFanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.5 |
swStructFanEntryA list of information for each board of the chassis. SwStructFanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.5.1 |
swStructFanUnitIndexID of the unit in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.5.1.1 |
swStructFanIndexID of the fan in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.5.1.2 |
swStructFanOperStatusDescribes the operation status of the fanro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.1.5.1.3 |
swL2Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2 |
swL2DevMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1 |
swL2DevCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1 |
swL2DevCtrlStpStateThis object can be enabled or disabled spanning tree algorithm
during runtime of the system.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.1 |
swL2DevCtrlPartitionModeStateThis object used to enable or disable port auto partition. When the
object apply for all ports of the devicerw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.2 |
swL2DevCtrlTableLockStateThis object indicates whether the address table is locked.
In other words, the address table doesn't learn any more new address.
The aging timer is suspended when the address table is locked. As long
as the table is locked, all of the frames are dropped if the destination
can not be found in the address.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.3 |
swL2DevCtrlHOLStateThe object provides a way to prevent HOL (Head Of Line) blocking
between ports. HOL protection may prevent forwarding a packet to
a blocking port.The idea relies on the assumption that it is better
to discard packets destined to blocking ports, then to let them consume
more and more buffers in the input-port's Rx-counters because eventually
these input ports may become totally blocked. The meanings of the values
are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disabled(2) - HOL function disable for device.
enabled(3) - HOL function enable for device.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.4 |
swL2DevCtrlAddrLookupModesAndHitRateAccording to the differnet address looke mode setting, to enlarge the
address table size is possible in device. But there is side effect as
the higher level you have, the lower thorughput device has. That means
Level 0 get the smallest table size, but get better performace. We
recommand the user use the Level 1 as defualt setting.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.5 |
swL2DevCtrlUploadImageFileNameThe name of the image file to be uploaded from the device to TFTP server
when enabling image upload function (by writing swDevCtrlUploadImage).rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.6 |
swL2DevCtrlUploadImageImage file upload control. Writing it by any value will
immediately invoke image upload function.rw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.7 |
swL2DevCtrlClearAddressTableThis object indicates the agent clear address table.
Setting this object to clear(2) will clear address
table. The agent alwats return other(1) when this
object is read.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.1.8 |
swL2DevAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.2 |
swL2DevAlarmPartitionDepending on this object, the device send a trap or not when
any one of the device's ports was partitioned.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.2.1 |
swL2DevAlarmNewRootWhen the device has become the new root of the Spanning Tree, this
object decide whether to send a new root trap.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.2.2 |
swL2DevAlarmTopChangeThis object determines to send a trap or not when the switch topology
was changed. If the object is enabled(3), the topologyChange trap is
sent by the device when any of its configured ports transitions from
the Learning state to the Forwarding state, or from the Forwarding state
to the Blocking state. For the same port tranition, the device doesn't
send the trap if this object value is disabled or other.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.2.3 |
swL2DevAlarmLinkChangeThis object determines to send a trap or not when the link
was changed. If the object is enabled(3), the Link Change trap is
sent by the device when any of its ports link change. The device doesn't
send the trap if this object value is disabled or other.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.1.2.4 |
swL2PortMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4 |
swL2PortInfoTableA table that contains information about every port. SEQUENCE OF SwL2PortInfoEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1 |
swL2PortInfoEntryA list of information for each port of the device. SwL2PortInfoEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1.1 |
swL2PortInfoUnitIndexIndicates ID of the unit in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1.1.1 |
swL2PortInfoModuleIndexIndicates ID of the module on the unitro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1.1.2 |
swL2PortInfoIndexIndicates ID of the port on the modulero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1.1.3 |
swL2PortInfoTypeIndicates the connector type of this port.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1.1.4 |
swL2PortInfoDescrProvides port type information in displayed string formatro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1.1.5 |
swL2PortInfoLinkStatusIndicates port link statusro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1.1.6 |
swL2PortInfoNwayStatusThis object indicates the port speed and duplex mode.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.1.1.7 |
swL2PortCtrlTableA table that contains control information about every port. SEQUENCE OF SwL2PortCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2 |
swL2PortCtrlEntryA list of control information for each port of the device. SwL2PortCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1 |
swL2PortCtrlUnitIndexIndicates ID of the unit in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.1 |
swL2PortCtrlModuleIndexIndicates ID of the module on the unitro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.2 |
swL2PortCtrlIndexThis object indicates the device port number.(1..Max port number)ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.3 |
swL2PortCtrlAdminStateThis object decides the port to be enabled or disabled.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.4 |
swL2PortCtrlLinkStatusAlarmStateDepends on this object to determine to send a trap or
not when link status changes .rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.5 |
swL2PortCtrlNwayStateChooses the port speed, duplex mode, and N-Way function mode.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.6 |
swL2PortCtrlFlowCtrlStateSets IEEE 802.3x compliant flow control function as enabled or disabled.
And IEEE 802.3x compliant flow control function work only when the port
is in full duplex mode.The setting is effective the next time you reset
or power on the hub.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.7 |
swL2PortCtrlBackPressStateDepends on this object to determine to enable or disable the
backpressure function when the port is working in half duplex mode.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.8 |
swL2PortCtrlLockStateThe state of this entry. The meanings of the values are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
disable(2) - Port lock funtion disable.
enable(3) - Locking a port provides the CPU with the ability to
decide which address are permitted to reside on such
port, who knows about these address, and unknown packet
forwarding to/from such ports. This is a way to prevent
undesired traffic from being received or transmmited on
the port.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.9 |
swL2PortCtrlPriorityThe priority queueing for packets received on this port, except for
BPDU/IGMP packets and packets with unknown unicast destination address.
IGMP and BPDU packets are always routed with high priority; packets with
unknown unicast destination addresses are always routed with low priority.
Other packets follow the rules below:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
default(2) - A packet is normally classified as low priority
,unless at least one of the following is true:
(a)The packet contained a TAG (per 802.1Q definition) with the
priority greater or equal to 4.
(b)The address-table entry for the destination address had Pd=HIGH.
force-low_priority(3) - A packet is normally classified as low priority.
force-high_priority(4) - A packet is normally classified as high priority.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.10 |
swL2PortCtrlStpStateThe state of STP(spanning tree algorithm) operation on this port. That's
meaning the port whether add in the STP. The value enabled(3) indicates
that STP is enabled on this port, as long as swDevCtrlStpState is also
enabled for this device. When disabled(2) but swDevCtrlStpState is still
enabled for the device, STP is disabled on this port : any BPDU packets
received will be discarded and no BPDU packets will be propagated from
the port.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.11 |
swL2PortCtrlHOLStateThe object provides a way to prevent HOL (Head Of Line) blocking
between ports. HOL protection may prevent forwarding a packet to
a blocking port.The idea relies on the assumption that it is better
to discard packets destined to blocking ports, then to let them consume
more and more buffers in the input-port's Rx-counters because eventually
these input ports may become totally blocked. The meanings of the values
are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disabled(2) - HOL function disable.
enabled(3) - HOL function enable.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.12 |
swL2PortCtrlBcastRisingActThis object indicates the system action when broadcast storm
rising threshold is met.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
do-nothing(2) - no action.
blocking(3) - the port can discard any coming broadcast frame.
blocking-trap(4) - the port can discard any coming broadcast frame.
And the device can send a broadcast rising trap.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.13 |
swL2PortCtrlBcastFallingActThis object indicates the device action when broadcast storm
falling threshold is met.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
do-nothing(2) - no action.
forwarding(3) - the port has returned to normal operation mode.
forwarding-trap(4) - the port has returned to normal operation mode. And
the device can send a broadcast falling trap.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.2.1.14 |
swL2PortStTableA list of port statistic Counter entries. SEQUENCE OF SwL2PortStEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3 |
swL2PortStEntryThis entry include all the port statistic Counter which support
by the device, like Bytes received, Bytes Sent ... SwL2PortStEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1 |
swL2PortStUnitIndexindicates ID of the unit in the devicero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.1 |
swL2PortStModuleIndexindicates ID of the module on the unitro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.2 |
swL2PortStIndexThis object indicates the device port number.(1..Max port number)ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.3 |
swL2PortStByteRxswDevCtrlCounterMode = 2(switched-frames):This counter is incre-
mented once for every data octet of good packets(unicast + multi-
cast + broadcast) received.
swDevCtrlCounterMode = 3(all-frames):This counter is incremented
once for every data octet of good packets(unicast + multicast +
broadcast packets) and for local and dropped packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.4 |
swL2PortStByteTxThis counter is incremented once for every data octet of a trans-
mitted good packet.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.5 |
swL2PortStFrameRxswDevCtrlCounterMode = 2(switched-frames):This counter is incre-
mented once for every good packet(unicast + multicast + broadcast
) received.
swDevCtrlCounterMode = 3(all-frames):This counter is incremented
once for every good packet(unicast + multicast + broadcast packets)
and for local and dropped packets received.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.6 |
swL2PortStFrameTxThis counter is incremented once for every transmitted good packet.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.7 |
swL2PortStTotalBytesRxThis counter is incremented once for every data octet of all
received packets. This include data octets of rejected and local
packets which are not forwarded to the switching core for trans-
mission. This counter should reflect all the data octets received
on the line. Note: A nibble is not counted as a whole byte.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.8 |
swL2PortStTotalFramesRxThis counter is incremented once for every received packets. This
include rejected and local packets which are not forwarded to the
switching core for transmission. This counter should reflect all
packets received on the line.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.9 |
swL2PortStBroadcastFramesRxswDevCtrlCounterMode = 2(switched-frames):This counter is incre-
mented once for every good broadcast packet received.
swDevCtrlCounterMode = 3(all-frames):This counter is incremented
once for every good broadcast packet received and for local and
dropped broadcast packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.10 |
swL2PortStMulticastFramesRxswDevCtrlCounterMode = 2(switched-frames):This counter is incre-
mented once for every good multicast packet received.
swDevCtrlCounterMode = 3(all-frames):This counter is incremented
once for every good multicast packet received and for local and
dropped multicast packets. This counter does not include broad-
cast packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.11 |
swL2PortStCRCErrorThis counter is incremented once for every received packet which
meets all the following conditions:
1.Packet data length is between 64 and 1518 bytes inclusive.
2.Packet has invalid CRC.
3.Collision event , late collision event and receive error event
have not been detected.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.12 |
swL2PortStOversizeFramesThe number of good frames with length more than 1518 bytes.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.13 |
swL2PortStFragmentsThis counter is incremented once for every received packet which
meets all the following conditions:
1.Packet data length is less than 64 bytes or packet withourt SFD
and is less than 64 bytes in length.
2.Packet has invalid CRC.
3.Collision event , late collision event and receive error event
have not been detected.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.14 |
swL2PortStJabberThe number of frames with length more than 1518 bytes and with
CRC error or misaligned.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.15 |
swL2PortStCollisionThe number of Collisionsro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.16 |
swL2PortStLateCollisionThe number of Late Collision(collision occurring later than
576th transmitted bit).ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.17 |
swL2PortStFrames-64-bytesThis counter is incremented once for every received and trans-
mitted packet with size of 64 bytes. This counter includes reject-
ed received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.18 |
swL2PortStFrames-65-127-bytesThis counter is incremented once for every received and trans-
mitted packet with size of 65 to 127 bytes. This counter includes
rejected received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.19 |
swL2PortStFrames-128-255-bytesThis counter is incremented once for every received and trans-
mitted packet with size of 128 to 255 bytes. This counter includes
rejected received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.20 |
swL2PortStFrames-256-511-bytesThis counter is incremented once for every received and trans-
mitted packet with size of 256 to 511 bytes. This counter includes
rejected received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.21 |
swL2PortStFrames-512-1023-bytesThis counter is incremented once for every received and trans-
mitted packet with size of 512 to 1023 bytes. This counter includ-
es rejected received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.22 |
swL2PortStFrames-1024-1536-bytesThis counter is incremented once for every received and trans-
mitted packet with size of 1024 to 1536 bytes. This counter includ-
es rejected received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.23 |
swL2PortStFramesDroppedFramesThis counter is incremented once for every received dropped pack-
et.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.24 |
swL2PortStMulticastFramesTxThe number of multicast frames sent. This counter does not include
broadcast packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.25 |
swL2PortStBroadcastFramesTxThe number of broadcast frames sent.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.26 |
swL2PortStUndersizeFramesThis counter is incremented once for every received packet which
meets all the following conditions:
1.Packet data length is less than 64 bytes.
2.Packet has valid CRC.
3.Collision event , late collision event and receive error event
have not been detected.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.4.3.1.27 |
swPortSniff OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.5 |
swSniffCtrlTableA list of port sniffing entries.Port Sniffing function provides an easy
way to monitor traffic on any port. In this way any good packets appears
on the source mirror port also shows up on the target mirror port
without need to reconstruct the LAN. SEQUENCE OF SwSniffCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.5.1 |
swSniffCtrlEntryEach entry contains a pair of sniff source port and target port. SwSniffCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.5.1.1 |
swSniffIndexA unique number to identify the sniff entry.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.5.1.1.1 |
swSniffSourcePortIndicates the source port whose traffic will be sniffed.rw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.5.1.1.2 |
swSniffTargetPortIndicates the target port which the traffic appears on the source sniffed port
will be copied to. A trunk port member cannot be configured as a target
Sniffing portrw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.5.1.1.3 |
swSniffStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
disable(2) - Sniff funtion disable.
enable(3) - Sniff funtion enable and Sniff received or transmit
packet by Sniff source port.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.5.1.1.4 |
swPortTrunk OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6 |
swPortTrunkCtrlTableThis table specifies which port trunking configuration.
Trunking ID is as following :
trunk 1 - unit1, base, port5~12;
trunk 2 - unit1, base, port13~20;
trunk 3 - unit1, slot1, port21,22;
trunk 4 - reserved;
trunk 5, 9, 13 - unit2(3, 4), base, port7~14;
trunk 6, 10, 14 - unit2(3, 4), base, port15~22;
trunk 7, 11, 15 - unit2(3, 4), slot1, port23,24;
trunk 8, 12, 16 - reserved SEQUENCE OF SwPortTrunkCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.1 |
swPortTrunkCtrlEntryEach entry specifies which ports are grouped as a single logical link. SwPortTrunkCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.1.1 |
swPortTrunkCtrlIndexThe index of logical trunk of ports.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.1.1.1 |
swPortTrunkCtrlAnchorPortget anchor port number between trunk portsrw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.1.1.2 |
swPortTrunkCtrlMasterPortget master port number between trunk portsro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.1.1.3 |
swPortTrunkCtrlNameThe name of logical trunk of ports.rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.1.1.4 |
swPortTrunkCtrlMemberspecifies the member ports which are grouped as a trunk.rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.1.1.5 |
swPortTrunkCtrlStateThis object determines whether the trunk setting is in enable/disable state.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.1.1.6 |
swPortTrunkMemberTableA list of information provide a different view for member ports grouped as a trunk SEQUENCE OF SwPortTrunkMemberEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.2 |
swPortTrunkMemberEntryEach entry corresponds to a member port. SwPortTrunkMemberEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.2.1 |
swPortTrunkMemberIndexIndicates the trunk ID where the port is located.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.2.1.1 |
swPortTrunkMemberUnitIndexIndicates the unit ID where the port is located.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.2.1.2 |
swPortTrunkMemberModuleIndexIndicates the module ID where the port is located.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.2.1.3 |
swPortTrunkMemberPortIndexIndicates the port index relative to the module.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.6.2.1.4 |
swIGMP OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7 |
swIGMPCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.1 |
swIGMPAdminStateThis object allows the user to enable/disable the IGMP snooping function.
The IGMP function provided by the device includes both v1 and v2.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.1.1 |
swIGMPTimeoutThe timeout value for sending IGMP query packet when no one
was sent by the multicast router in the lan. The device will
actively send the query message.rw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.1.2 |
swIGMPInfoTableThe table contains the number current IGMP query packets which
is captured by this device, as well as the IGMP query packets
sent by the device. SEQUENCE OF SwIGMPInfoEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.2 |
swIGMPInfoEntryInformation about current IGMP query information, provided that
swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN
entry are all enabled. SwIGMPInfoEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.2.1 |
swIGMPInfoIndexThis object indicates the IGMP query information entry number. It could
be up to 12 entries, depending on current number of VLAN entries.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.2.1.1 |
swIGMPInfoVidThis object indicates the Vid of associated IGMP info table entry. It
follows swIGMPCtrlVid in the associated entry of IGMP control table
(swIGMPCtrlTable).ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.2.1.2 |
swIGMPInfoQueryCountThis object indicates the number of query packets received since the
IGMP function enabled, in per-VLAN basis.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.2.1.3 |
swIGMPInfoTxQueryCountThis object indicates the send count of IGMP query messages, in
per-VLAN basis. In case of IGMP timer expiration, the switch
sends IGMP query packets to related VLAN member ports and increment
this object by 1.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.2.1.4 |
swIGMPTableThis table contains information regarding to the IGMP group membership report
received by each port. The system will use the information recorded in this
table to forward the multicast packet to those ports which have group membership.
Since packets will not be forwarded to necessary ports, the network bandwith can
thus be saved. SEQUENCE OF SwIGMPEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.3 |
swIGMPEntryEach entry describes the ports which are member of a specific group address.
Note that when a specific multicast address existing in the table also exist in
the filter table, the filter table has higher priority over this table. SwIGMPEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.3.1 |
swIGMPVidThis object indicates the Vid of individual IGMP table entry. It
shows the Vid of IGMP report information captured on network.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.3.1.1 |
swIGMPGroupIpAddrA IP multicast group address which has port membership in the underlying network.ro IpAddress .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.3.1.2 |
swIGMPGroupMacAddrThe multicast MAC address corresponds to swIGMPGroupIpAddr.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.3.1.3 |
swIGMPPortMapIndicates the set of ports which are members of this multicast group.
These ports are represented by a octet string.The most significant bit
represents the lowest numbered port, and the least significant bit
represents the highest numbered port.ro PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.3.1.4 |
swIGMPIpGroupReportCountIndicates the number of group membership report packets received by the device
corresponding to this multicast group.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.3.1.5 |
swIGMPCtrlTableThe table controls the Vlan's IGMP function. Its scale depends on
current VLAN state (swVlanInfoStatus). If VLAN is disabled or
in Mac-Base mode, there is only one entry in the table, with
index 1. If VLAN is in Port-Base or 802.1q mode, the number of
entries can be up to 12, with index range from 1 to 12. SEQUENCE OF SwIGMPCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.4 |
swIGMPCtrlEntryThe entry in IGMP control table (swIGMPCtrlTable).
The entry is effective only when IGMP capture switch is enabled. SwIGMPCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.4.1 |
swIGMPCtrlIndexThis object indicates the IGMP control entry number.Its scale depends on
current VLAN state (es400VlanInfoStatus). If VLAN is disabled or in
Mac-Base mode, there is only one entry in the table, with index 1.
If VLAN is in Port-Base or 802.1q mode, the number of entries is 12,
with index range from 1 to 12.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.4.1.1 |
swIGMPCtrlVidThis object indicates the IGMP control entry's VLAN id. If VLAN is
disabled or in Mac-Base mode, the Vid is always 0 and cannot be changed
by management users. If VLAN is in Port-Base mode, the Vid is arranged
from 1 to 12 , fixed form. If VLAN is in 802.1q mode, the Vid setting
can vary from 1 to 4094 by management user, and the Vid in each entry
must be unique in the IGMP Control Table.rw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.4.1.2 |
swIGMPCtrlTimerThe timer value for sending IGMP query packet when none
was sent by the multicast router in the LAN. The timer works
in per-VLAN basis. Our device will be activated to send the query
message if the timer is expired. Please reference RFC2236-1997.
And it recommends a default of 125 seconds. The timeout value must
be at least 30 seconds.rw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.4.1.3 |
swIGMPCtrlStateThis object indicates the status of this entry.
other(1) - This entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
disable(2) - IGMP funtion is disabled for this entry.
enable(3) - IGMP funtion is enabled for this entry.
deleted(4) - IGMP entry is deleted.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.7.4.1.4 |
swVlan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8 |
swVlanCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.1 |
swVlanCtrlModeThis object controls which Vlan function will be enable (or disable)
when the switch hub restart at the startup (power on) or warm
start.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.1.1 |
swVlanInfoStatusThis object indicates which Vlan function be enable (or disable)
in mandatoryly stage. There are no effect when change swVlanCtrlMode
vlaue in the system running.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.1.2 |
swVlanSnmpPortVlanIndicates the Vlan which the SNMP port belongs to.
The value range is 1 to 4094.rw VlanIndex .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.1.3 |
swMacBaseVlan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2 |
swMacBaseVlanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.1 |
swMacBaseVlanMaxNumThe maximum number of Mac base Vlan allowed by the system.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.1.1 |
swMacBaseVlanAddrMaxNumThe maximum number of entries in Mac-based Vlan address table.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.1.2 |
swMacBaseVlanCtrlTableA table that contains information about MAC base Vlan
entries for which the switch has forwarding and/or filtering
information. This information is used by the transparent switching
function in determining how to propagate a received frame. SEQUENCE OF SwMacBaseVlanCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.2 |
swMacBaseVlanCtrlEntryA list of information about a specific MAC base Vlan configuration
portlist for which the switch has some forwarding and/or filtering
information. SwMacBaseVlanCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.2.1 |
swMacBaseVlanDescA textual description of the Mac Base Vlan for memorization.
The string cannot set to empty string. There is a default value for this stringro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.2.1.1 |
swMacBaseVlanMacMemberThis object indicates the total number of MAC addresses contained
in the VLAN entry.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.2.1.2 |
swMacBaseVlanCtrlStateThis object indicates the MacBase Vlan state.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.2.1.3 |
swMacBaseVlanAddrTableA table that contains information about unicast or multicast
entries for which the switch has forwarding and/or filtering
information. This information is used by the transparent switching
function in determining how to propagate a received frame. Note that
the priority of MacBaseVlanAddr table entries is lowest than Filtering
Table and FDB Table, i.e. if there is a table hash collision between
the entries of MacBaseVlanAddr Table and Filtering Table inside the
switch H/W address table, then Filtering Table entry overwrite the
colliding entry of MacBaseVlanAddr Table. This state is same of FDB
table. See swFdbFilterTable and swFdbStaticTable description also. SEQUENCE OF SwMacBaseVlanAddrEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.3 |
swMacBaseVlanAddrEntryA list of information about a specific unicast or multicast MAC
address for which the switch has some forwarding and/or filtering
information. SwMacBaseVlanAddrEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.3.1 |
swMacBaseVlanAddrThis object indictaes a unicast or multicast MAC address for which
the bridge has forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.3.1.1 |
swMacBaseVlanAddrVlanDescA textual description of the Mac Base Vlan for memorization .rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.3.1.2 |
swMacBaseVlanAddrStateThis object indicates the MacBase Vlan Address entry state.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
invalid(2) - writing this value to the object, and then the corresponding
entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.3.1.3 |
swMacBaseVlanAddrStatusThis object indicates the MacBase Vlan Address entry state.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
apply(2) - this entry is currently in use and reside in the table.
not-apply(3) - this entry is reside in the table but currently not
in use due to conflict with filter table.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.2.3.1.4 |
swPortBaseVlan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3 |
swPortBaseVlanTotalNumThe total number of Port-Base Vlan which is in enabled state
within this switch hub.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.1 |
swPortBaseVlanDefaultVlanTableA table that contains default Port-Based VLAN list entries for the
switch. The entry (Vid = 1,i.e. swPortBaseVlanDefaultPvid = 1) is
defalut Port-Based VLAN , maintained by system. SEQUENCE OF SwPortBaseVlanDefaultVlanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.2 |
swPortBaseVlanDefaultVlanEntryA list of default Port-Based VLAN information in
swPortBaseVlanDefaultVlanTable. SwPortBaseVlanDefaultVlanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.2.1 |
swPortBaseVlanDefaultPvidThis object indicates the default Port-Base Vlan ID. It occupies only
1 entry in VLAN table, with VID=1.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.2.1.1 |
swPortBaseVlanDefaultDescA textual description of the Port-Base Vlan.ro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.2.1.2 |
swPortBaseVlanDefaultPortListThis object indicates the port member set of the specified Vlan.
Each Vlan has a octect string to indicate the port map. The most
significant bit represents the lowest numbered port, and the
least significant bit represents the highest numbered port.ro PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.2.1.3 |
swPortBaseVlanDefaultPortNumberThis object indicates the number of ports of the entry.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.2.1.4 |
swPortBaseVlanConfigTableA table that contains Port-Based VLAN list entries for the switch.
The device can't support port overlapping in Port-Based VLAN. SEQUENCE OF SwPortBaseVlanConfigEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.3 |
swPortBaseVlanConfigEntryA list of information about a specific Port-Based VLAN configuration
in swPortBaseVlanConfigTable. SwPortBaseVlanConfigEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.3.1 |
swPortBaseVlanConfigPvidThis object indicates the Port-Base Vlan ID. There are up to 11 entries
for current product now. The object range varies from 2 to 12.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.3.1.1 |
swPortBaseVlanConfigDescA textual description of the Port-Base Vlan. It cannot be a null string.
And each description must be unique in the table.rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.3.1.2 |
swPortBaseVlanConfigPortListThis object indicates which ports are belong to the Vlan. Each Vlan
has a octect string to indicate with port map. The most significant
bit represents the lowest numbered port, and the least significant
bit represents the highest numbered port.rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.3.1.3 |
swPortBaseVlanConfigPortNumberThis object indicates the number of ports of the entry.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.3.3.1.4 |
pBridgeMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4 |
dot1dExtBase OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.1 |
dot1dDeviceCapabilitiesIndicates the optional parts of IEEE 802.1D and 802.1Q that are
implemented by this device and are managable through this MIB.
Capabilities that are allowed on a per-port basis are indicated
in dot1dPortCapabilities.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.1.1 |
dot1dTrafficClassesEnabledThe value true(1) indicates that Traffic Classes are enabled on
this bridge. When false(2), the bridge operates with a single
priority level for all traffic.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.1.2 |
dot1dGmrpStatusThe administrative status requested by management for GMRP.
The value enabled(1) indicates that GMRP should be enabled on
this device, in all VLANs, on all ports for which it has not been
specifically disabled. When disabled(2), GMRP is disabled, in all
VLANs, on all ports and all GMRP packets will be forwarded
transparently. This object affects both Applicant and Registrar
state machines. A transition from disabled(2) to enabled(1) will
cause a reset of all GMRP state machines on all ports.rw EnabledStatus .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.1.3 |
dot1dPortCapabilitiesTableA table that contains capabilities information about every port
that is associated with this bridge. SEQUENCE OF Dot1dPortCapabilitiesEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.1.4 |
dot1dPortCapabilitiesEntryA set of capabilities information about this port indexed
by dot1dBasePort. Dot1dPortCapabilitiesEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.1.4.1 |
dot1dPortCapabilitiesIndicates the parts of IEEE 802.1D and 802.1Q that are optional
on a per-port basis that are implemented by this device and are
managable through this MIB.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.1.4.1.1 |
dot1dPriority OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.2 |
dot1dPortPriorityTableA table that contains information about every port that is
associated with this transparent bridge. SEQUENCE OF Dot1dPortPriorityEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.2.1 |
dot1dPortPriorityEntryA list of the number of egress traffic classes supported for each
port in a transparent bridge. This is indexed by dot1dBasePort. Dot1dPortPriorityEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.2.1.1 |
dot1dPortNumTrafficClassesThe number of egress traffic classes supported on this port.
This object may optionally be read-only.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.2.1.1.1 |
dot1dGarp OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.3 |
dot1dPortGarpTableA table of GARP control information about every bridge port.
This is indexed by dot1dBasePort. SEQUENCE OF Dot1dPortGarpEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.3.1 |
dot1dPortGarpEntryGARP control information for a bridge port. Dot1dPortGarpEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.3.1.1 |
dot1dPortGarpJoinTimeThe GARP Join time, in centiseconds.rw TimeInterval .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.3.1.1.1 |
dot1dPortGarpLeaveTimeThe GARP Leave time, in centiseconds.rw TimeInterval .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.3.1.1.2 |
dot1dPortGarpLeaveAllTimeThe GARP LeaveAll time, in centiseconds.rw TimeInterval .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.3.1.1.3 |
dot1dGmrp OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.4 |
dot1dPortGmrpTableA table of GMRP control and status information about every bridge port.
Augments the dot1dBasePortTable. SEQUENCE OF Dot1dPortGmrpEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.4.1 |
dot1dPortGmrpEntryGMRP control and status information for a bridge port. Dot1dPortGmrpEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.4.1.1 |
dot1dPortGmrpStatusThe state of GMRP operation on this port.
The value enabled(1) indicates that GMRP is enabled on this port,
in all VLANs, as long as dot1dGmrpStatus is also enabled for this
device.
When disabled(2) but dot1dGmrpStatus is still enabled for the
device, GMRP is disabled on this port in all VLANs: any GMRP
packets received will be silently discarded and no GMRP
registrations will be propagated from other ports.
This object affects all GMRP Applicant and Registrar state machines
on this port.
A transition from disabled(2) to enabled(1) will cause a reset of
all GMRP state machines on this port.rw EnabledStatus .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.4.1.1.1 |
dot1dPortGmrpFailedRegistrationsThe total number of failed GMRP registrations, for any reason,
in all VLANs, on this port.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.4.1.1.2 |
dot1dPortGmrpLastPduOriginThe Source MAC Address of the last GMRP message received on this port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.4.4.1.1.3 |
qBridgeMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5 |
dot1qBase OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.1 |
dot1qVlanVersionNumberThe version number of IEEE 802.1Q that this device supports.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.1.1 |
dot1qMaxVlanIdThe maximum IEEE 802.1Q VLAN ID that this device supports.ro VlanId .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.1.2 |
dot1qMaxSupportedVlansThe maximum number of IEEE 802.1Q VLANs that this device supports.ro Unsigned32 .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.1.3 |
dot1qNumVlansThe current number of IEEE 802.1Q VLANs that are configured in
this device.ro Unsigned32 .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.1.4 |
dot1qGvrpStatusThe administrative status requested by management for GVRP.
The value enabled(1) indicates that GVRP should be enabled on this
device, on all ports for which it has not been specifically disabled.
When disabled(2), GVRP is disabled on all ports and all GVRP packets
will be forwarded transparently.
This object affects all GVRP Applicant and Registrar state machines.
A transition from disabled(2) to enabled(1) will cause a reset of
all GVRP state machines on all ports.rw EnabledStatus .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.1.5 |
dot1qTp OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2 |
dot1qFdbTableA table that contains configuration and control information for
each Filtering Database currently operating on this device.
Entries in this table appear automatically when VLANs are assigned
FDB IDs in the dot1qVlanCurrentTable. SEQUENCE OF Dot1qFdbEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.1 |
dot1qFdbEntryInformation about a specific Filtering Database. Dot1qFdbEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.1.1 |
dot1qFdbIdThe identity of this Filtering Database. Unsigned32 .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.1.1.1 |
dot1qFdbDynamicCountThe current number of dynamic entries in this Filtering Database.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.1.1.2 |
dot1qTpFdbTableA table that contains information about unicast entries for which
the device has forwarding and/or filtering information.
This information is used by the transparent bridging function in
determining how to propagate a received frame. SEQUENCE OF Dot1qTpFdbEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.2 |
dot1qTpFdbEntryInformation about a specific unicast MAC address for which the
device has some forwarding and/or filtering information. Dot1qTpFdbEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.2.1 |
dot1qTpFdbAddressA unicast MAC address for which the device has forwarding and/or
filtering information. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.2.1.1 |
dot1qTpFdbPortEither the value '0', or the port number of the port on which
a frame having a source address equal to the value of the
corresponding instance of dot1qTpFdbAddress has been seen.
A value of '0' indicates that the port number has not been learned
but that the device does have some forwarding/filtering information
about this address (e.g. in the dot1qStaticUnicastTable).
Implementers are encouraged to assign the port value to this object
whenever it is learned even for addresses for which the corresponding
value of dot1qTpFdbStatus is not learned(3).ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.2.1.2 |
dot1qTpFdbStatusThe status of this entry. The meanings of the values are:
other(1) - none of the following. This may include the case where
some other MIB object (not the corresponding instance
of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable)
is being used to determine if and how frames addressed to
the value of the corresponding instance of dot1qTpFdbAddress
are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it was learned
but has since aged out), but has not yet been flushed
from the table.
learned(3) - the value of the corresponding instance of dot1qTpFdbPort
was learned and is being used.
self(4) - the value of the corresponding instance of dot1qTpFdbAddress
represents one of the device's addresses.
The corresponding instance of dot1qTpFdbPort indicates
which of the device's ports has this address.
mgmt(5) - the value of the corresponding instance of dot1qTpFdbAddress
is also the value of an existing instance of dot1qStaticAddress.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.2.1.3 |
dot1qTpGroupTableA table containing filtering information for VLANs configured into
the bridge by (local or network) management, or learnt dynamically,
specifying the set of ports to which frames received on a VLAN for
this FDB and containing a specific Group destination address are
allowed to be forwarded. SEQUENCE OF Dot1qTpGroupEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.3 |
dot1qTpGroupEntryFiltering information configured into the bridge by management,
or learnt dynamically, specifying the set of ports to which frames
received on a VLAN and containing a specific Group destination
address, are allowed to be forwarded.
The subset of these ports learnt dynamically is also provided. Dot1qTpGroupEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.3.1 |
dot1qTpGroupAddressThe destination Group MAC address in a frame to which this entry's
filtering information applies. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.3.1.1 |
dot1qTpGroupEgressPortsThe complete set of ports, in this Filtering Database, to which
frames destined for this Group MAC address are currently being
explicitly forwarded.
This does not include ports for which this address is only
implicitly forwarded, in the dot1qForwardAllPorts list.ro PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.3.1.2 |
dot1qTpGroupLearntThe subset of ports in dot1qTpGroupEgressPorts which were learnt by
GMRP or some other dynamic mechanism, in this Filtering database.ro PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.2.3.1.3 |
dot1qStatic OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.3 |
dot1qStaticMulticastTableA table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded. A value of zero in this table as the port
number from which frames with a specific destination
address are received, is used to specify all ports for
which there is no specific entry in this table for that
particular destination address. Entries are valid for
Multicast and Broadcast addresses only. SEQUENCE OF Dot1qStaticMulticastEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.3.2 |
dot1qStaticMulticastEntryFiltering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
destination address are allowed to be forwarded. Dot1qStaticMulticastEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.3.2.1 |
dot1qStaticMulticastAddressThe destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a Multicast or Broadcast address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.3.2.1.1 |
dot1qStaticMulticastReceivePortEither the value '0', or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry. INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.3.2.1.2 |
dot1qStaticMulticastStaticEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not
be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length.rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.3.2.1.3 |
dot1qStaticMulticastForbiddenEgressPortsThe set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must not be forwarded, regardless
of any dynamic information e.g. from GMRP. A port may
not be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length.rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.3.2.1.4 |
dot1qStaticMulticastStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
invalid(2) - writing this value to the object
removes the corresponding entry.
permanent(3) - this entry is currently in use
and will remain so after the next reset of
the bridge.
deleteOnReset(4) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.3.2.1.5 |
dot1qVlan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4 |
dot1qVlanNumDeletesThe number of times a VLAN entry has been deleted from the
dot1qVlanCurrentTable (for any reason).
If an entry is deleted, then inserted, and then deleted, this
counter will be incremented by 2.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.1 |
dot1qVlanCurrentTableA table containing current configuration information for each VLAN
currently configured into the device by (local or network) management,
or dynamically created as a result of GVRP requests received. SEQUENCE OF Dot1qVlanCurrentEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2 |
dot1qVlanCurrentEntryInformation for a VLAN configured into the device by (local or
network) management, or dynamically created as a result of GVRP
requests received. Dot1qVlanCurrentEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2.1 |
dot1qVlanTimeMarkA TimeFilter for this entry. See the TimeFilter textual convention
to see how this works. TimeFilter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2.1.1 |
dot1qVlanIndexThe VLAN-ID or other identifier refering to this VLAN. VlanIndex .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2.1.2 |
dot1qVlanFdbIdThe Filtering Database used by this VLAN. This is one of the
dot1qFdbId values in the dot1qFdbTable.
This value is allocated automatically by the device whenever the
VLAN is created: either dynamically by GVRP, or by management,
in dot1qVlanStaticTable.
Allocation of this value follows the learning constraints defined
for this VLAN in dot1qLearningConstraintsTable.ro Unsigned32 .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2.1.3 |
dot1qVlanCurrentEgressPortsThe set of ports which are transmitting traffic for this VLAN as
either tagged or untagged frames.ro PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2.1.4 |
dot1qVlanCurrentUntaggedPortsThe set of ports which are transmitting traffic for this VLAN as
untagged frames.ro PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2.1.5 |
dot1qVlanStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so differ from the following values.
permanent(2) - this entry, corresponding to an entry in
dot1qVlanStaticTable, is currently in use and will
remain so after the next reset of the device.
The port lists for this entry include ports from
the equivalent dot1qVlanStaticTable entry and ports
learnt dynamically.
dynamicGvrp(3) - this entry is currently in use and will remain so
until removed by GVRP.
There is no static entry for this VLAN and it will
be removed when the last port leaves the VLAN.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2.1.6 |
dot1qVlanCreationTimeThe value of sysUpTime when this VLAN was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.2.1.7 |
dot1qVlanStaticTableA table containing static configuration information for each VLAN
configured into the device by (local or network) management.
All entries are permanent and will be restored after the device
is reset. SEQUENCE OF Dot1qVlanStaticEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.3 |
dot1qVlanStaticEntryStatic information for a VLAN configured into the device by (local
or network) management. Dot1qVlanStaticEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.3.1 |
dot1qVlanStaticNameAn administratively assigned string, which may be used to identify
the VLAN.rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.3.1.1 |
dot1qVlanStaticEgressPortsThe set of ports which are permanently assigned to the egress list
for this VLAN by management. Changes to a bit in this object affect
the per-port per-VLAN Registrar control for Registration Fixed for
the relevant GVRP state machine on each port.
A port may not be added in this set if it is already a member of
the set of ports in dot1qVlanForbiddenEgressPorts. The default
value of this object is a string of zeros of appropriate length,
indicating not fixed.rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.3.1.2 |
dot1qVlanForbiddenEgressPortsThe set of ports which are prohibited by management from being
included in the egress list for this VLAN.
Changes to this object that cause a port to be included or excluded
affect the per-port per-VLAN Registrar control for Registration
Forbidden for the relevant GVRP state machine on each port.
A port may not be added in this set if it is already a member of
the set of ports in dot1qVlanStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length, excluding all ports from the forbidden set.rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.3.1.3 |
dot1qVlanStaticUntaggedPortsThe set of ports which should transmit egress packets for this VLAN
as untagged. The default value of this object for the default VLAN
(VlanId 001) is a string of appropriate length including all ports.
There is no specified default for other VLANs.
If a device cannot support a value being set then its agent will
reject the set operation.
Attempts to set more than one VLAN to be untagged on egress may be
rejected by devices which do not support this option.rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.3.1.4 |
dot1qVlanStaticRowStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.3.1.5 |
dot1qPortVlanTableA table containing per port control and status information for VLAN
configuration in the device. SEQUENCE OF Dot1qPortVlanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.4 |
dot1qPortVlanEntryInformation controlling VLAN configuration for a port on the device.
This is indexed by dot1dBasePort. Dot1qPortVlanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.4.1 |
dot1qPvidThe PVID, the VLAN ID assigned to untagged frames or Prority-Tagged
frames received on this port.rw VlanIndex .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.4.1.1 |
dot1qPortIngressFilteringWhen this is true(1) the device will discard incoming frames for
VLANs which do not include this Port in its Member set.
When false(2), the port will accept all incoming frames.
This control does not affect VLAN independent BPDU frames, such
as GVRP and STP.
It does affect VLAN dependent BPDU frames, such as GMRP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.4.1.2 |
dot1qPortGvrpStatusThe state of GVRP operation on this port.
The value enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this device.
When disabled(2) but dot1qGvrpStatus is still enabled for the
device, GVRP is disabled on this port: any GVRP packets received
will be silently discarded and no GVRP registrations will be
propagated from other ports.
This object affects all GVRP Applicant and Registrar state machines
on this port.
A transition from disabled(2) to enabled(1) will cause a reset of
all GVRP state machines on this port.rw EnabledStatus .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.4.1.3 |
dot1qPortGvrpFailedRegistrationsThe total number of failed GVRP registrations, for any reason,
on this port.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.4.1.4 |
dot1qPortGvrpLastPduOriginThe Source MAC Address of the last GVRP message received on this port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.8.5.4.4.1.5 |
swFDB OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9 |
swFdbStaticTableThis table defines for frames with specific destincation MAC address,
the set of ports that the frame will be forwarded to. Note that if a MAC
address appears in this table also appears in the filter table, the filter
table has higher priority over than this table. See swFdbFilterTable description. SEQUENCE OF SwFdbStaticEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.1 |
swFdbStaticEntryA list of information specifies which ports the frames with specific
destination MAC address to go. SwFdbStaticEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.1.1 |
swFdbStaticVidThis object indicates the VLAN-ID. If the swVlanInfoStatus is
port-base mode , the object ranges from 1 to 12. If VLAN is in
mac-based mode or disabled, the object indicates the default
VLAN-ID(0).ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.1.1.1 |
swFdbStaticAddressThe MAC address which this forwarding entry applied. It can be an unicast address
or a multicast address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.1.1.2 |
swFdbStaticPortMapThe set of ports to which frames received containing the value of swFdbStaticAddress
as the DA, are allowed to be forwarded. Each octet within the value of
this object specifies a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents the lowest
numbered port, and the least significant bit represents the highest
numbered port. Thus, each port of the bridge is represented by
a single bit within the value of this object. If that bit has a
value of '1' then that port is included in the set of ports; the
port is not included if its bit has a value of '0'.(Note that the
setting of the bit corresponding to the port from which a frame
is received is irrelevant.)rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.1.1.3 |
swFdbStaticJoinIGMPSnoopingThis object indicates whether to allow ports to join/leave IGMP group
via IGMP Snooping.
For a multicast address entry, port group could be classified into
two catelogies : one is static and another is dynamic. In static port
group, port members is defined statically by user, and dynamic port
group allows a port member to join/leave the membership dynamically,
according to IGMP report/leave messages. When this object is set to
'enabled', it allows dynamic port group updated for the multicast
address entry as well as static port group. When it is set to 'disabled'
, dynamic port member join/leave is disabled, but static port group is
not affected.
This object is only vaild for multicast address indicated by
swFdbStaticAddressIndex. It always is 'disabled' for unicast addresses.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disabled(2) - this entry doesn't allow dynamic updates via IGMP Snooping.This
is a default setting.
enabled(3) - this entry allow dynamic updates via IGMP Snooping.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.1.1.4 |
swFdbStaticStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
invalid(2) - writing this value to the object, and then the corresponding
entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.1.1.5 |
swFdbStaticStatusThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
apply(2) - this entry is currently in use and reside in the table.
not-apply(3) - this entry is reside in the table but currently not
in use due to conflict with filter table.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.1.1.6 |
swFdbStaticMemberTableA list of information provide a different view for those ports where packets from
the given Vlan need to be forwarded to. SEQUENCE OF SwFdbStaticMemberEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.2 |
swFdbStaticMemberEntryA list of MIB capability entries supported by this forwarding static table. SwFdbStaticMemberEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.2.1 |
swFdbStaticMemberVidThis object indicates the VLAN-ID. If the swVlanInfoStatus is
port-base mode , the object ranges from 1 to 12. If VLAN is in
mac-based mode or disabled, the object indicates the default
VLAN-ID(0).ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.2.1.1 |
swFdbStaticMemberAddressThe MAC address which this forwarding entry applied. It can be an unicast address
or a multicast address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.2.1.2 |
swFdbStaticMemberUnitIndexSpecifies the unit ID where the port is locatedro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.2.1.3 |
swFdbStaticMemberModuleIndexSpecifies the module ID where the port is locatedro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.2.1.4 |
swFdbStaticMemberPortIndexSpecifies the port index relative to the modulero INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.2.1.5 |
swFdbFilterTableThis table defines information for the device to filter packets with
specific MAC address (either as the DA or as the SA). The MAC address
can be a unicast address or a multicast address.This table has higher
priority than both static FDB table and IGMP table. It means that if a
MAC address appears on this table also appears on the static FDB table,
the device will use the information provide by this table to process
the packet. SEQUENCE OF SwFdbFilterEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.3 |
swFdbFilterEntryA list of information about a specific unicast/multicast MAC address
for which the switch has filtering information. SwFdbFilterEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.3.1 |
swFdbFilterVidThis object indicates the VLAN-ID. If the swVlanInfoStatus is
port-base mode , the object ranges from 1 to 12. If VLAN is in
mac-based mode or disabled, the object indicates the default
VLAN-ID(0).ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.3.1.1 |
swFdbFilterAddressThis object indicates a unicast/multicast MAC address for which the bridge
has filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.3.1.2 |
swFdbFilterStateThis object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
invalid(2) - writing this value to the object, and then the corresponding
entry will be removed from the table.
valid(3) - writing this value to the object, and then the corresponding
entry will be added into the table.
dst-src-addr(4) - recieved frames's destination address or source
address are currently used to be filtered as it meets with
the MAC address entry of the table.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.25.2.9.3.1.3 |
endOfMIBro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.25.9999 |