POWERHUB-TCPIP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
182
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
182 total| Object Name |
|---|
fore OBJECT IDENTIFIER .1.3.6.1.4.1.326 |
systems OBJECT IDENTIFIER .1.3.6.1.4.1.326.2 |
lsd OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.6 |
lsdproducts OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.6.1 |
lsdcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.6.2 |
alrip OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.6.2.4 |
alripControlTypecontrol type to change the RIP update mechanismrw Enumeration .1.3.6.1.4.1.326.2.6.2.4.1 |
alRipNormalConfigTablePer port RIP configuration per segment method. SEQUENCE OF AlripNormalConfigEntry .1.3.6.1.4.1.326.2.6.2.4.2 |
alripNormalConfigEntryinformation about a specific RIP configuration entry AlripNormalConfigEntry .1.3.6.1.4.1.326.2.6.2.4.2.1 |
alripNormalConfigPortPort number for which the RIP parameters
are to be set or viewed.rw INTEGER .1.3.6.1.4.1.326.2.6.2.4.2.1.1 |
alripNormalConfigTalkControls whether the hub generates RIP
packets on the port identified by the instance of
ripConfigPort.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.2.1.2 |
alripNormalConfigListenControls whether the hub processes RIP
packets received on the port identified by the
instance of ripConfigPort.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.2.1.3 |
alripNormalConfigPoisonControls what happens when a route goes down.
If set to no(2), the hub simply stops reporting the
route. If set to yes(1), the hub reports it one more
time, but with a metric value of 16, which infinity
as far as RIP is concerned. Thus other routers learn
immediately that the route is down.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.2.1.4 |
alripNormalConfigRptStaticRtWhen RIP packets are generated on the port,
controls whether the hub reports the static routes
in its route table.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.2.1.5 |
alripNormalConfigRptDefaultRtWhen RIP packets are generated on the port,
controls whether the hub reports the default routes,
if any, in ints route table.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.2.1.6 |
alripNormalConfigAccptDefaultRtWhen RIP packets are received on the port,
controls whether the hub accepts(learns) a default
route that is reported in a RIP packet.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.2.1.7 |
alRipVLANConfigTablePer port RIP configuration per VLAN method. SEQUENCE OF AlripVLANConfigEntry .1.3.6.1.4.1.326.2.6.2.4.3 |
alripVLANConfigEntryinformation about a specific RIP configuration entry AlripVLANConfigEntry .1.3.6.1.4.1.326.2.6.2.4.3.1 |
alripVLANConfigNetNumberIP network number for which the RIP
parameters are to be set or viewed.rw IpAddress .1.3.6.1.4.1.326.2.6.2.4.3.1.1 |
alripVLANConfigTalkControls whether the hub generates RIP
packets on the port identified by the instance of
ripConfigPort.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.3.1.2 |
alripVLANConfigListenControls whether the hub processes RIP
packets received on the port identified by the
instance of ripConfigPort. This field cannot be
activated if this interface is controlled by OSPFrw Enumeration .1.3.6.1.4.1.326.2.6.2.4.3.1.3 |
alripVLANConfigPoisonControls what happens when a route goes down.
If set to no(2), the hub simply stops reporting the
route. If set to yes(1), the hub reports it one more
time, but with a metric value of 16, which infinity
as far as RIP is concerned. Thus other routers learn
immediately that the route is down.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.3.1.4 |
alripVLANConfigRptStaticRtWhen RIP packets are generated on the port,
controls whether the hub reports the static routes
in its route table.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.3.1.5 |
alripVLANConfigRptDefaultRtWhen RIP packets are generated on the port,
controls whether the hub reports the default routes,
if any, in ints route table.rw Enumeration .1.3.6.1.4.1.326.2.6.2.4.3.1.6 |
alripVLANConfigAccptDefaultRtWhen RIP packets are received on the port,
controls whether the hub accepts(learns) a defaultrw Enumeration .1.3.6.1.4.1.326.2.6.2.4.3.1.7 |
alripVLANConfigDeleteWhen set to 1, this entry is deleted.rw INTEGER .1.3.6.1.4.1.326.2.6.2.4.3.1.8 |
alripStatsClearWhen set to 1, clears the RIP statsrw INTEGER .1.3.6.1.4.1.326.2.6.2.4.4 |
alRipStatPktsRcvdPackets Received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.5 |
alRipStatPktsXmittedPackets Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.4.6 |
alRipStatReqsRcvdRequests Received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.7 |
alRipStatRespRcvdResponses Received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.8 |
alRipStatReqsXmittedRequests Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.4.9 |
alRipStatRespXmittedResponses Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.4.10 |
alRipStatRouteTimeOutsRoute Timeouts.ro Counter .1.3.6.1.4.1.326.2.6.2.4.11 |
alRipStatShortPktsShort packets received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.12 |
alRipStatBadVerBad version pkts received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.13 |
alRipStatBadZeroesBad zeroes received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.14 |
alRipStatBadSrcPortPackets with bad Source port received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.15 |
alRipStatBadSrcIpPackets with bad source IP address received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.16 |
alRipStatPktsSelfPackets from self received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.17 |
alRipigUpdatesnumber of RIP update trigged.ro Counter .1.3.6.1.4.1.326.2.6.2.4.18 |
alRipStatPqueuePktsQueuedPackets queued in RIP process queue.ro Counter .1.3.6.1.4.1.326.2.6.2.4.19 |
alRipStatPqueueFreeQueueFree entries in the RIP processing queue.ro Counter .1.3.6.1.4.1.326.2.6.2.4.20 |
alRipStatTqueuePktsQueuedPackets queued in the RIP route timeout process queue.ro Counter .1.3.6.1.4.1.326.2.6.2.4.21 |
alRipStatTqueueFreeQueueFree entries in the RIP route timeout queue.ro Counter .1.3.6.1.4.1.326.2.6.2.4.22 |
alRipDynPktsRcvdPackets Received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.23 |
alRipDynPktsXmittedPackets Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.4.24 |
alRipDynReqsRcvdRequests Received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.25 |
alRipDynRespRcvdResponses Received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.26 |
alRipDynReqsXmittedRequests Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.4.27 |
alRipDynRespXmittedResponses Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.4.28 |
alRipDynRouteTimeOutsRoute Timeouts.ro Counter .1.3.6.1.4.1.326.2.6.2.4.29 |
alRipDynShortPktsShort packets received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.30 |
alRipDynBadVerBad version pkts received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.31 |
alRipDynBadZeroesBad zeroes received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.32 |
alRipDynBadSrcPortPackets with bad Source port received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.33 |
alRipDynBadSrcIpPackets with bad source IP address received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.34 |
alRipDynPktsSelfPackets from self received.ro Counter .1.3.6.1.4.1.326.2.6.2.4.35 |
alRipDynNumTrigUpdatesnumber of RIP update trigged.ro Counter .1.3.6.1.4.1.326.2.6.2.4.36 |
alRipDyntPqueuePktsQueuedPackets queued in RIP process queue.ro Counter .1.3.6.1.4.1.326.2.6.2.4.37 |
alRipDynPqueueFreeQueueFree entries in the RIP processing queue.ro Counter .1.3.6.1.4.1.326.2.6.2.4.38 |
alRipDynTqueuePktsQueuedPackets queued in the RIP route timeout process queue.ro Counter .1.3.6.1.4.1.326.2.6.2.4.39 |
alRipDynTqueueFreeQueueFree entries in the RIP route timeout queue.ro Counter .1.3.6.1.4.1.326.2.6.2.4.40 |
alRipAccptFilTableRIP Accept filter table SEQUENCE OF RipAccptFilEntry .1.3.6.1.4.1.326.2.6.2.4.41 |
ripAccptFilEntryRIP Accept filter entry RipAccptFilEntry .1.3.6.1.4.1.326.2.6.2.4.41.1 |
ripAccptFilNumberFilter Number; Range 1-64rw INTEGER .1.3.6.1.4.1.326.2.6.2.4.41.1.1 |
ripAccptFilAddrValid network or subnet addressrw IpAddress .1.3.6.1.4.1.326.2.6.2.4.41.1.2 |
ripAccptFilMaskAccept filter Maskrw IpAddress .1.3.6.1.4.1.326.2.6.2.4.41.1.3 |
ripAccptFilPortPort number on which network should be
accepted or not. Range 1-14.rw INTEGER .1.3.6.1.4.1.326.2.6.2.4.41.1.4 |
alRipReportFilTableRIP Report filter table SEQUENCE OF RipReportFilEntry .1.3.6.1.4.1.326.2.6.2.4.42 |
ripReportFilEntryRIP Report filter entry RipReportFilEntry .1.3.6.1.4.1.326.2.6.2.4.42.1 |
ripReportFilNumberFilter Number; Range 1-64rw INTEGER .1.3.6.1.4.1.326.2.6.2.4.42.1.1 |
ripReportFilAddrValid network or subnet addressrw IpAddress .1.3.6.1.4.1.326.2.6.2.4.42.1.2 |
ripReportFilMaskReport filter Maskrw IpAddress .1.3.6.1.4.1.326.2.6.2.4.42.1.3 |
ripReportFilPortPort number on which network should be
reported or not. Port number range 1-14rw INTEGER .1.3.6.1.4.1.326.2.6.2.4.42.1.4 |
altcp OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.6.2.5 |
alTcpConnIdleTimeTime in minutes before sending keep-alives.
The range is 5 to 30 minutes.rw INTEGER .1.3.6.1.4.1.326.2.6.2.5.1 |
alTcpKeepAliveIntTime interval in seconds between two
successive keep-alive sends. The range is 30 to 240
seconds.rw INTEGER .1.3.6.1.4.1.326.2.6.2.5.2 |
alTcpDisconnectIntTime interval in seconds, before an idle
connection is dropped. This equals to the sum of
alTcpConnIdleTime plus eight times the
alTcpKeepAliveInt interval.ro INTEGER .1.3.6.1.4.1.326.2.6.2.5.3 |
alTcpShortSegRcvdNumber of short segments received.ro INTEGER .1.3.6.1.4.1.326.2.6.2.5.4 |
alTcpStatsClearWhen set to 1, clears the TCP stats.rw INTEGER .1.3.6.1.4.1.326.2.6.2.5.5 |
alTcpConnTableA table containing TCP connection-specific
information. SEQUENCE OF AlTcpConnEntry .1.3.6.1.4.1.326.2.6.2.5.6 |
alTcpConnEntryInformation about a particular current TCP
connection. An object of this type is transient,
in that it ceases to exist when (or soon after)
the connection makes the transition to the CLOSED
state. AlTcpConnEntry .1.3.6.1.4.1.326.2.6.2.5.6.1 |
alTcpConnIdThe connection Identifier by which a
connection is addressed.ro INTEGER .1.3.6.1.4.1.326.2.6.2.5.6.1.1 |
alTcpConnStateThe state of this TCP connection.
The only value which may be set by a management
station is deleteTCB(12). Accordingly, it is
appropriate for an agent to return a `badValue'
response if a management station attempts to set
this object to any other value.
If a management station sets this object to the
value deleteTCB(12), then this has the effect of
deleting the TCB (as defined in RFC 793) of the
corresponding connection on the managed node,
resulting in immediate termination of the
connection.rw Enumeration .1.3.6.1.4.1.326.2.6.2.5.6.1.2 |
alTcpConnLocalAddressThe local IP address for this TCP connection.
In the case of a connection in the listen state which
is willing to accept connections for any IP
interface associated with the node, the value
0.0.0.0 is used.ro IpAddress .1.3.6.1.4.1.326.2.6.2.5.6.1.3 |
alTcpConnLocalPortThe local port number for this TCP connection.ro INTEGER .1.3.6.1.4.1.326.2.6.2.5.6.1.4 |
alTcpConnRemAddressThe remote IP address for this TCP connection.ro IpAddress .1.3.6.1.4.1.326.2.6.2.5.6.1.5 |
alTcpConnRemPortThe remote port number for this TCP connection.ro INTEGER .1.3.6.1.4.1.326.2.6.2.5.6.1.6 |
alTcpFilTableTCP filter table SEQUENCE OF TcpFilEntry .1.3.6.1.4.1.326.2.6.2.5.7 |
tcpFilEntryTCP filter entry TcpFilEntry .1.3.6.1.4.1.326.2.6.2.5.7.1 |
tcpFilNumberFilter Number; Range 1-32rw INTEGER .1.3.6.1.4.1.326.2.6.2.5.7.1.1 |
tcpFilSrcAddrSource addressrw IpAddress .1.3.6.1.4.1.326.2.6.2.5.7.1.2 |
tcpFilSrcMaskMaskrw IpAddress .1.3.6.1.4.1.326.2.6.2.5.7.1.3 |
tcpFilProtocoltcp(1) or udp(2)rw INTEGER .1.3.6.1.4.1.326.2.6.2.5.7.1.4 |
tcpFilDstPortsmtp(1000), telnet(2000),
ftp(3000) or valid port Numberrw INTEGER .1.3.6.1.4.1.326.2.6.2.5.7.1.5 |
alip OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.6.2.6 |
alArpTableClearWhen set, clears the ARP table.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.1 |
alArpAgeTimeout in minutes for aging ARP entries;
when set to zero, set-arpage is turned off.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.2 |
alArpStatReqsRcvdRequests Received.ro Counter .1.3.6.1.4.1.326.2.6.2.6.3 |
alArpStatRepliesRcvdReplies Received.ro Counter .1.3.6.1.4.1.326.2.6.2.6.4 |
alArpStatInvalidOpcodesInvalid Opcodes Received.ro Counter .1.3.6.1.4.1.326.2.6.2.6.5 |
alArpStatRequestsSentRequests Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.6.6 |
alArpStatRepliesSentReplies Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.6.7 |
alArpStatProxyRepliesnumber of proxy repliedro Counter .1.3.6.1.4.1.326.2.6.2.6.8 |
alArpDynReqsRcvdRequests Received.ro Counter .1.3.6.1.4.1.326.2.6.2.6.9 |
alArpDynRepliesRcvdReplies Received.ro Counter .1.3.6.1.4.1.326.2.6.2.6.10 |
alArpDynInvalidOpcodesInvalid Opcodes Received.ro Counter .1.3.6.1.4.1.326.2.6.2.6.11 |
alArpDynRequestsSentRequests Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.6.12 |
alArpDynRepliesSentReplies Sent.ro Counter .1.3.6.1.4.1.326.2.6.2.6.13 |
alArpDynProxyRepliesnumber of proxy repliedro Counter .1.3.6.1.4.1.326.2.6.2.6.14 |
alArpStatsClearWhen set to 1, clears the ARP statistics.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.15 |
alArpProxyTablePer port proxy arp enable/disable SEQUENCE OF ArpProxyEntry .1.3.6.1.4.1.326.2.6.2.6.16 |
arpProxyEntryinformation of a specific arp proxy entry ArpProxyEntry .1.3.6.1.4.1.326.2.6.2.6.16.1 |
arpProxyPortPort Numberro INTEGER .1.3.6.1.4.1.326.2.6.2.6.16.1.1 |
arpProxyEnableIf set to Enable(1), enables proxy arp
arp requests received on the port identified by
the instance of arpProxyPort. If set to Disable(2), it
disables the proxy arp for arp requests received on
the ports identified by the instance of arpProxyPort.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.16.1.2 |
alIpTemplateTablePer template information SEQUENCE OF AlipTemplateEntry .1.3.6.1.4.1.326.2.6.2.6.17 |
alipTemplateEntryInformation about a filtering template AlipTemplateEntry .1.3.6.1.4.1.326.2.6.2.6.17.1 |
alipTemplateNumberThe number of the template with which it
is identified.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.17.1.1 |
alipTemplateDeleteWhen set to 1, this entry is deleted.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.17.1.2 |
alipTemplateActionWhether the packet being filtered should
be forwarded or blockedrw Enumeration .1.3.6.1.4.1.326.2.6.2.6.17.1.3 |
alipTemplateSrcAddrThe portion of the packet's source address
specified by ipTemplateSrcMask is matched with
this address.rw IpAddress .1.3.6.1.4.1.326.2.6.2.6.17.1.4 |
alipTemplateSrcMaskSource Mask. The portion specified by
this mask is matched with source address.rw IpAddress .1.3.6.1.4.1.326.2.6.2.6.17.1.5 |
alipTemplateDstAddrThe portion of the packet's destination
address specified by ipTemplateDstMask is matched
with this address.rw IpAddress .1.3.6.1.4.1.326.2.6.2.6.17.1.6 |
alipTemplateDstMaskDestination mask. The portion specified by
this mask is matched with destination address.rw IpAddress .1.3.6.1.4.1.326.2.6.2.6.17.1.7 |
alipTemplateProtocolDetermines the type of packets that need
to be filtered. PowerHub currently recognizes ip(1)
, icmp(1), ipinip(4), tcp(6), udp(17), ospf(89). If
all(0) is specified, the filter looks for all
protocols other than the ones PowerHub currently accepts.
The IP protocol numbers are listed in RFC 1340rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.17.1.8 |
alipTemplateOperatorAllowed only if the protocol field is tcp
or udp. The following operators allowed:
(1) Unknown
=(2) Equal to
~=(3) Not equal to
<(4) Less than
>(5) Greater than
conreq(6) Connect request. Connect request is valid
only if protocol is tcprw Enumeration .1.3.6.1.4.1.326.2.6.2.6.17.1.9 |
alipTemplateDstPortThis is expressed as either a well-known
protocol name or a well-known tcp or udp port
number. 0 means unknownrw INTEGER .1.3.6.1.4.1.326.2.6.2.6.17.1.10 |
alIpRuleTablePer template information SEQUENCE OF AlipRuleEntry .1.3.6.1.4.1.326.2.6.2.6.18 |
alipRuleEntryInformation about a specific filtering rule AlipRuleEntry .1.3.6.1.4.1.326.2.6.2.6.18.1 |
alipRuleNumberThe number of the rule with which it is
Identified.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.18.1.1 |
alipRuleDeleteIf set to 1 the entry is deleted.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.18.1.2 |
alipRuleTemplatesThe templates associated with the rule
identified by the instance of ipRuleNumber.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.6.2.6.18.1.3 |
alipAcsCtrlTablePer port IP access control filters SEQUENCE OF AlipAcsCtrlEntry .1.3.6.1.4.1.326.2.6.2.6.19 |
alipAcsCtrlEntryinformation of a specific rule applied to segment AlipAcsCtrlEntry .1.3.6.1.4.1.326.2.6.2.6.19.1 |
alipAcsCtrlPortPort number of the port for which the
source and destination access filter apply.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.19.1.1 |
alipAcsCtrlDeleteIf set to 1, the entry is deleted.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.19.1.2 |
alipAcsCtrlSourceRulethe source rule is assigned to the segmentrw INTEGER .1.3.6.1.4.1.326.2.6.2.6.19.1.3 |
alipAcsCtrlDestRulethe destination rule is assigned to the segmentrw INTEGER .1.3.6.1.4.1.326.2.6.2.6.19.1.4 |
alipFilStatStatsTablePer template static statistics
from the beginning of the last system reboot. SEQUENCE OF AlipFilStatStatsEntry .1.3.6.1.4.1.326.2.6.2.6.20 |
alipFilStatStatsEntryfilter statistics entry AlipFilStatStatsEntry .1.3.6.1.4.1.326.2.6.2.6.20.1 |
alipFilStatStatsTemplateThe template number for which
the stats are displayedro Counter .1.3.6.1.4.1.326.2.6.2.6.20.1.1 |
alipFilStatStatsInPktsThe number of packets that matched
the template identified by the instance of
alipFilStatStatsTemplate. The template has to
be a Source template.ro Counter .1.3.6.1.4.1.326.2.6.2.6.20.1.2 |
alipFilStatStatsOutPktsThe number of packets that matched
the template identified by the instance of
alipFilStatStatsTemplate. The template has to
be a Destination template.ro Counter .1.3.6.1.4.1.326.2.6.2.6.20.1.3 |
alipFilDynStatsTablePer template dynamic statistics
from the beginning of the last clear. SEQUENCE OF AlipFilDynStatsEntry .1.3.6.1.4.1.326.2.6.2.6.21 |
alipFilDynStatsEntryinformation of a specific statistic entry AlipFilDynStatsEntry .1.3.6.1.4.1.326.2.6.2.6.21.1 |
alipFilDynStatsTemplateThe template number for which
the stats are displayedro Counter .1.3.6.1.4.1.326.2.6.2.6.21.1.1 |
alipFilDynStatsInPktsThe number of packets that matched
the template identified by the instance of
alipFilDynStatsTemplate. The template has to
be a Source template.ro Counter .1.3.6.1.4.1.326.2.6.2.6.21.1.2 |
alipFilDynStatsOutPktsThe number of packets that matched
the template identified by the instance of
alipFilDynStatsTemplate. The template has to
be a Destination template.ro Counter .1.3.6.1.4.1.326.2.6.2.6.21.1.3 |
alipFilDynStatsClearSetting the value of 1, it will
clear all the stats for the template
identified by the instance of
alipFilDynStatsTemplate.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.21.1.4 |
alipTotalFilPacketForwardThe total number of packets forwarded since last
system reset.ro Counter .1.3.6.1.4.1.326.2.6.2.6.22 |
alipTotalFilPacketBlockThe total number of packets blocked since last
system reset.ro Counter .1.3.6.1.4.1.326.2.6.2.6.23 |
alipCurrentFilPacketForwardThe total number of packets forwarded since
the last statistical clear.ro Counter .1.3.6.1.4.1.326.2.6.2.6.24 |
alipCurrentFilPacketBlockThe total number of packets blocked since
the last statistical clear.ro Counter .1.3.6.1.4.1.326.2.6.2.6.25 |
alIpInterfaceTableIP interface table corresponding to the command
- interface-table. SEQUENCE OF AlIpInterfaceEntry .1.3.6.1.4.1.326.2.6.2.6.26 |
alIpInterfaceEntryEntry of IP interface AlIpInterfaceEntry .1.3.6.1.4.1.326.2.6.2.6.26.1 |
ipInterfaceNumberSegment number of the selecetd IP address interface
entry.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.26.1.1 |
ipInterfaceAddressIP address of the selected IP segment number.rw IpAddress .1.3.6.1.4.1.326.2.6.2.6.26.1.2 |
ipInterfaceSubnetMaskIP subnet mask for the selected IP address.rw IpAddress .1.3.6.1.4.1.326.2.6.2.6.26.1.3 |
ipInterfaceBroadCastSpecifies style of broadcast address on a segment
basis: when you specify 'br0', the hub sends an
'all-0s' broadcast; when you sepcify 'br1', the hub
sends 'all-1s' broadcast. The default is 'br1'.rw Enumeration .1.3.6.1.4.1.326.2.6.2.6.26.1.4 |
ipInterfaceCostSpecifies an additiopnal cost of using the subnet
interface. This cost is the number of extra hops to
the destination. The range is 1 thru 14. The default
is 0. When you set the cost to a value greater than
zero, routing is forced thru the other hub if it is
alive.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.26.1.5 |
ipInterfaceDeleteWhen this object is set with value 1, the IP
interface corresponds to the segment number will
be deleted; otherwise this object returns value 0.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.26.1.6 |
ipInterfaceMtuDisplays the maximum transimission unit size allowed
on this IP interface.ro INTEGER .1.3.6.1.4.1.326.2.6.2.6.26.1.7 |
ipInterfaceStateDisplays the up/down status of the IP interface.ro Enumeration .1.3.6.1.4.1.326.2.6.2.6.26.1.8 |
ipInterfacePktsInTotal number of packets received on this interface.ro Counter .1.3.6.1.4.1.326.2.6.2.6.26.1.9 |
ipInterfaceOctetsInTotal number of bytes received on this interface.ro Counter .1.3.6.1.4.1.326.2.6.2.6.26.1.10 |
ipInterfacePktsOutTotal number of packets transmitted to the network
by this interface.ro Counter .1.3.6.1.4.1.326.2.6.2.6.26.1.11 |
ipInterfaceOctetsOutTotal number of bytes transimitted to the network
by this interface.ro Counter .1.3.6.1.4.1.326.2.6.2.6.26.1.12 |
alIpRtCacheTableIP Route Cache for all ports SEQUENCE OF AlIpRtCacheEntry .1.3.6.1.4.1.326.2.6.2.6.27 |
alIpRtCacheEntryIP Route cache for each port AlIpRtCacheEntry .1.3.6.1.4.1.326.2.6.2.6.27.1 |
ipRtCachePortPort number for the ip route cache.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.27.1.1 |
ipRtCacheDstAddressIp route cache destination address.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.27.1.2 |
ipRtCacheClearSetting this to Clear(1), will clear the
routecache for the port and Destination address
identified by the instance of ipRtCachePort and
ipRtCacheDstAddress.rw INTEGER .1.3.6.1.4.1.326.2.6.2.6.27.1.3 |
alVlanIpInterfaceTableVlan IP interface table corresponding to the command
- vlan add/del IP interface. SEQUENCE OF AlVlanIpInterfaceEntry .1.3.6.1.4.1.326.2.6.2.6.28 |
alVlanIpInterfaceEntryEntry of Vlan IP interface AlVlanIpInterfaceEntry .1.3.6.1.4.1.326.2.6.2.6.28.1 |
vlanIpInterfaceNameLenThe string length of Vlan name of the
selecetd vlan IP interface entry.ro INTEGER .1.3.6.1.4.1.326.2.6.2.6.28.1.1 |
vlanIpInterfaceNameVlan name of the selecetd vlan IP interface entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.6.2.6.28.1.2 |
vlanIpInterfaceAddressIP address of the selected vlan IP interface entry.ro IpAddress .1.3.6.1.4.1.326.2.6.2.6.28.1.3 |
vlanIpInterfaceSubnetMaskIP subnet mask for the selected vlan IP
interface entry.rw IpAddress .1.3.6.1.4.1.326.2.6.2.6.28.1.4 |
vlanIpInterfaceTypeSpecifies type of interface of vlan The types
are are broadcast, nbma (nonBroadcastMultiAccess
i.e.,CLIP), ptop (i.e.,PVC). Default is broadcast.
The discontinuos enumeration values actually mean
bitmask value which maps to bit positions in the
agent.rw Enumeration .1.3.6.1.4.1.326.2.6.2.6.28.1.5 |
vlanIpInterfaceNeighborAddressSpecifies the ip address of neightbors of the
interfaces of the vlan. This object apply only
when interface type is pointToPoint.rw IpAddress .1.3.6.1.4.1.326.2.6.2.6.28.1.6 |
vlanIpInterfaceRowStatusThe status of the table. The table can not be changed
when it is active.rw Enumeration .1.3.6.1.4.1.326.2.6.2.6.28.1.7 |