Fore-Funi-MIB
AI MIB Summary
The Fore-Funi-MIB facilitates monitoring and management of Fore Systems Funi (Fusion) ATM switches, exposing specific metrics for ATM virtual circuit statistics, interface status, and cell loss counters. This module enables administrators to track PVC/SVC states, interface errors, and traffic utilization within legacy ATM network infrastructure.
write something interesting here
Main OID:
funi.1.3.6.1.4.1.326.1.16.6
22
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
funiwrite something interesting here MODULE-IDENTITY .1.3.6.1.4.1.326.1.16.6 |
funiConnTableTable of cross connections between FUNI and ATM connections SEQUENCE OF FuniConnEntry .1.3.6.1.4.1.326.1.16.6.1 |
funiConnEntryEntry in the FUNI/atm netmod crossconnect table FuniConnEntry .1.3.6.1.4.1.326.1.16.6.1.1 |
funiConnFuniServiceIfIndexInterface index of the FUNI service this connection exists onro Integer32 .1.3.6.1.4.1.326.1.16.6.1.1.1 |
funiConnFuniVpiVPI of this connection on the FUNI servicero Integer32 .1.3.6.1.4.1.326.1.16.6.1.1.2 |
funiConnFuniVciVCI of this connection on the FUNI servicero Integer32 .1.3.6.1.4.1.326.1.16.6.1.1.3 |
funiConnFabricServiceIfIndexThis is the IfIndex associated with the pseudo atm service this connection is mapped to by the agent when this FUNI connection is created. This IfIndex can be converted to a BNP notation value through the IfIndexMapTable of the fore-switch MIB. This ifIndex will be stacked on top of the portIfIndex for a port. That BNP value can be used to establish a connection across the switching fabric by means of the FORE-switch MIB.ro Integer32 .1.3.6.1.4.1.326.1.16.6.1.1.4 |
funiConnFabricVpiThis is the Fabric VPI of the ATM connection this FUNI connection is mapped to by the agent when this row is created. This VPI will be used to establish a connection across the switching fabric by means of the FORE-switch MIBro Integer32 .1.3.6.1.4.1.326.1.16.6.1.1.5 |
funiConnFabricVciThis is the Fabric VCI of the ATM connection this FUNI connection is mapped to by the agent when this row is created. This VCI will be used to establish a connection across the switching fabric by means of the FORE-switch MIBro Integer32 .1.3.6.1.4.1.326.1.16.6.1.1.6 |
funiConnRowStatusThis object is used for dynamic creation of entries in this table. When the record is created, it is set to createAndWait, when the second hop of the connection is established across the fabric, this object's value is changed to go, which activates the IWF on the netmodrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.326.1.16.6.1.1.7 |
funiConnNameSymbolic name assigned to this connection by the operatorrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.1.16.6.1.1.8 |
funiConnAdminStatusIndicates whether the particular virtual circuit is operational.rw Enumeration .1.3.6.1.4.1.326.1.16.6.1.1.9 |
funiConnOperStatusIndicates the current operational status of a virtual circuit.ro Enumeration .1.3.6.1.4.1.326.1.16.6.1.1.10 |
funiConnProfileEpdPpdIndexThe index of the EpdPpd Controller profile which contains: 1 ) Enable/disable the EPD for CLP=0 cells for a specific connection; 2 ) Enable/disable the EPD for CLP=1 cells for a specific connection; 3 ) Enable/disable the PPD for CLP=1 cells for a specific connection.rw Integer32 .1.3.6.1.4.1.326.1.16.6.1.1.11 |
funiIfExtTableThis table incorporates the information pertinent to FUNI services, which is not part of the standard FUNI mib. SEQUENCE OF FuniIfExtEntry .1.3.6.1.4.1.326.1.16.6.2 |
funiIfExtEntryEntry in the extended FUNI Interface table FuniIfExtEntry .1.3.6.1.4.1.326.1.16.6.2.1 |
funiIfExtProfileFuniIndexThis is index of the FUNI profile this service is supposed to be using. This index should be used as a key in profileFuniTablerw Integer32 .1.3.6.1.4.1.326.1.16.6.2.1.1 |
funiIfExtProfileServiceIndexThis is index of the Generic Service profile this service is supposed to be using. This index should be used as a key in profileGenServiceTablerw Integer32 .1.3.6.1.4.1.326.1.16.6.2.1.2 |
funiIfExtStatsMonitorThis object specifies whether statistics are to be counted at a service level, this includes service and connection statistics. When the state changes from enabled to disabled all the related statistics will be frozen at their current value. When the state changes from disabled to enabled then all related statistics will be reset (zeroised). Note that this Monitor is overriden by the netmod level nmFramStatsMonitor. Refer to fore-fram.mib for more details.rw Enumeration .1.3.6.1.4.1.326.1.16.6.2.1.3 |
funiIfExtNeighborIpAddressThe IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system.This object is a mirror of atmInterfaceMyNeighborIpAddress from the ATM MIBrw IpAddress .1.3.6.1.4.1.326.1.16.6.2.1.4 |
funiIfExtStatsEnabledTimeStampThis object reflects the point in time, with reference to sysUpTime, either when funIfExtStatsMonitor is set to enabled or when nmFramStatsMonitor is set to enabled. The time will reflect the last StatsMonitor to be enabled. The timestamp provides a starting timestamp for the current statistics that are being counted.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.326.1.16.6.2.1.5 |
funiIfExtSigStatusThis object indicates whether there exists a FUNI signalling instance associated with the FUNI service. The possible value for this object is summarized as follows: FUNI Signalling Support Possible Value of this object =============================================================== disabled nonexist(2) _______________________________________________________________ enabled exist(1) nonexist(2) _______________________________________________________________ro Enumeration .1.3.6.1.4.1.326.1.16.6.2.1.6 |