Fore-tp25-MIB
AI MIB Summary
The Fore-tp25-MIB provides SNMP management capabilities for Fore Systems 25.6 Mbps UTP/STP port modules, enabling the monitoring of interface status, traffic counters, and error statistics for these specific legacy ATM switch components.
The foreTP25 Module supports all switchs that have the 25.6Mbps UTP/STP port module.
Main OID:
foreTP25Module.1.3.6.1.4.1.326.2.2.1.1.9
25
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
foreTP25ModuleThe foreTP25 Module supports all switchs that have the 25.6Mbps UTP/STP port module. MODULE-IDENTITY .1.3.6.1.4.1.326.2.2.1.1.9 |
tp25ConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.2.1.1.9.1 |
tp25ConfTableA table of TP25(25.6Mbps UTP/STP switch port configuration information. SEQUENCE OF Tp25ConfEntry .1.3.6.1.4.1.326.2.2.1.1.9.1.1 |
tp25ConfEntryA table entry containing TP25 configuration information for each port. Tp25ConfEntry .1.3.6.1.4.1.326.2.2.1.1.9.1.1.1 |
tp25ConfBoardThe index of this port's switch board.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.1 |
tp25ConfModuleThe network module of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.2 |
tp25ConfPortThe number of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.3 |
tp25MediaTypeThis variable represents the type of the physical medium connected to the TP25 interface: tp25UTP (1) means physical media is UTP tp25STP (2) means physical media is STP tp25FTP (3) means physical media is FTP.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.4 |
tp25LoopbackConfigThis variable represents the loopback configuration of the TP25 interface. tp25NoLoop (1) means that the interface is not in a loopback state. tp25DiagLoop (2) means that the transmit data stream is looped back to the receiver. tp25LineLoop (3) also known as remote loopback, in this state received data is transfered to upstream system as well as looped back to the transmitter.rw Enumeration .1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.5 |
tp25RxTimingThis variable represents the type of the physical medium connected to the TP25 interface: tp25NoTimingPresent (1) means port is not receiving sync pulses. tp25TimingPresent (2) means port is receiving sync pulses.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.6 |
tp25StatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.2.1.1.9.2 |
tp25ErrorTableA table of TP25 error counters. SEQUENCE OF Tp25ErrorEntry .1.3.6.1.4.1.326.2.2.1.1.9.2.1 |
tp25ErrorEntryA table entry containing TP25 error counters. Tp25ErrorEntry .1.3.6.1.4.1.326.2.2.1.1.9.2.1.1 |
tp25ErrorBoardThe index of this port's switch board.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.2.1.1.1 |
tp25ErrorModuleThe network module of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.2.1.1.2 |
tp25ErrorPortThe number of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.2.1.1.3 |
tp25ErrorSymbolThe number of all undefined 5 bit symbols received.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.9.2.1.1.4 |
tp25AtmTableA table of TP25 ATM statistics information. SEQUENCE OF Tp25AtmEntry .1.3.6.1.4.1.326.2.2.1.1.9.2.2 |
tp25AtmEntryA table entry containing TP25 ATM statistics information. Tp25AtmEntry .1.3.6.1.4.1.326.2.2.1.1.9.2.2.1 |
tp25AtmBoardThe index of this port's switch board.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.1 |
tp25AtmModuleThe network module of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.2 |
tp25AtmPortThe number of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.3 |
tp25AtmHCSsNumber of header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.4 |
tp25AtmRxCellsNumber of ATM cells that were received.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.5 |
tp25AtmTxCellsNumber of non-null ATM cells that were transmitted.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.6 |