FspR7-SPEQ-MIB
The Auto SPAN Equalization MIB.
Main OID:
speqMIB.1.3.6.1.4.1.2544.1.11.4
81
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
81 total| Object Name |
|---|
speqMIBThe Auto SPAN Equalization MIB. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.11.4 |
speqEntityMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.11.4.10 |
speqEntityTableTable for SPEQ existing addresses. Entities in this table are either provisioned or not. Containers are always present in the table as long as their supporting entity is provisioned. SEQUENCE OF SpeqEntityEntry .1.3.6.1.4.1.2544.1.11.4.10.1 |
speqEntityEntryEntry for SPEQ existing addresses. SpeqEntityEntry .1.3.6.1.4.1.2544.1.11.4.10.1.1 |
speqEntityIndexExisting adress indexro EntityIndex (ADVA-MIB) .1.3.6.1.4.1.2544.1.11.4.10.1.1.1 |
speqEntityContainedInContained inro EntityIndex (ADVA-MIB) .1.3.6.1.4.1.2544.1.11.4.10.1.1.2 |
speqEntityClassInstanceNumberThe class instance number of this entity within the module(card)ro Integer32 (1..2000 | -2147483648) .1.3.6.1.4.1.2544.1.11.4.10.1.1.3 |
speqEntityIndexAidNamero SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2544.1.11.4.10.1.1.4 |
speqContainsTableTable for all existing addresses. Gives the index of the subtending entity in the containment. SEQUENCE OF SpeqContainsEntry .1.3.6.1.4.1.2544.1.11.4.10.2 |
speqContainsEntry SpeqContainsEntry .1.3.6.1.4.1.2544.1.11.4.10.2.1 |
speqContainsIndexro EntityIndex (ADVA-MIB) .1.3.6.1.4.1.2544.1.11.4.10.2.1.1 |
speqConfigurationMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.11.4.12 |
speqConfigurationrw FspR7SpeqConfig .1.3.6.1.4.1.2544.1.11.4.12.1 |
speqDynamicComprw FspR7SpeqDisableEnable .1.3.6.1.4.1.2544.1.11.4.12.2 |
speqConfigTable SEQUENCE OF SpeqConfigEntry .1.3.6.1.4.1.2544.1.11.4.12.10 |
speqConfigEntry SpeqConfigEntry .1.3.6.1.4.1.2544.1.11.4.12.10.1 |
speqConfigAdminrw FspR7AdminState (FspR7-MIB) .1.3.6.1.4.1.2544.1.11.4.12.10.1.1 |
speqConfigOpticalSetpointrw Integer32 (-250..50 | -2147483648) UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.12.10.1.2 |
speqConfigPerChannelPowerrw Integer32 (-20..80 | -2147483648) UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.12.10.1.3 |
speqConfigGainCalrw Integer32 (-50..50 | -2147483648) UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.12.10.1.4 |
speqConfigOperaterw FspR7SpeqOperate .1.3.6.1.4.1.2544.1.11.4.12.10.1.5 |
speqConfigCapTable SEQUENCE OF SpeqConfigCapEntry .1.3.6.1.4.1.2544.1.11.4.12.11 |
speqConfigCapEntry SpeqConfigCapEntry .1.3.6.1.4.1.2544.1.11.4.12.11.1 |
speqConfigCapAdminro FspR7AdminStateCaps (FspR7-MIB) .1.3.6.1.4.1.2544.1.11.4.12.11.1.1 |
speqConfigCapOpticalSetpointro FspR7Integer32Caps UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.12.11.1.2 |
speqConfigCapPerChannelPowerro FspR7Integer32Caps UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.12.11.1.3 |
speqConfigCapGainCalro FspR7Integer32Caps UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.12.11.1.4 |
speqStatusMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.11.4.13 |
speqStatusTable SEQUENCE OF SpeqStatusEntry .1.3.6.1.4.1.2544.1.11.4.13.10 |
speqStatusEntry SpeqStatusEntry .1.3.6.1.4.1.2544.1.11.4.13.10.1 |
speqStatusOperro FspR7OperState (FspR7-MIB) .1.3.6.1.4.1.2544.1.11.4.13.10.1.1 |
speqStatusSecondaryStatesro FspR7EntitySecondaryStates (FspR7-MIB) .1.3.6.1.4.1.2544.1.11.4.13.10.1.2 |
speqStatusQualifyro FspR7SpeqQualify .1.3.6.1.4.1.2544.1.11.4.13.10.1.3 |
speqStatusOpticalLineAidro EntityIndex (ADVA-MIB) .1.3.6.1.4.1.2544.1.11.4.13.10.1.4 |
speqStatusOscAidro EntityIndex (ADVA-MIB) .1.3.6.1.4.1.2544.1.11.4.13.10.1.5 |
speqStatusOpticalLineServiceTypero FspR7SpeqOptLineService .1.3.6.1.4.1.2544.1.11.4.13.10.1.6 |
speqStatusPerChannelPowerLimitro FspR7SpeqPpcLimit .1.3.6.1.4.1.2544.1.11.4.13.10.1.7 |
speqStatusCalculatedGainro Unsigned32 UNITS "0.1 dB" .1.3.6.1.4.1.2544.1.11.4.13.10.1.8 |
speqStatusStatusro FspR7SpeqStatus .1.3.6.1.4.1.2544.1.11.4.13.10.1.9 |
speqStatusFarEndConfigro FspR7SpeqFarEndConfig .1.3.6.1.4.1.2544.1.11.4.13.10.1.10 |
speqStatusFarEndStatusro FspR7SpeqStatus .1.3.6.1.4.1.2544.1.11.4.13.10.1.11 |
speqStatusFarEndPpcro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.13.10.1.12 |
speqStatusFarEndOptro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.13.10.1.13 |
speqStatusFarEndOprro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.13.10.1.14 |
speqStatusNearEndOptro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.13.10.1.15 |
speqStatusNearEndOprro Integer32 UNITS "0.1 dBm" .1.3.6.1.4.1.2544.1.11.4.13.10.1.16 |
speqAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.11.4.14 |
speqTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.11.4.14.1 |
speqTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.11.4.14.1.0 |
alarmOosDisabledSpeqNon-Specific Disablement of Management Access NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120000 |
alarmOosMaintenanceSpeqAlarms are logged but not notified, service affecting changes and operations are permitted NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120002 |
alarmMessageLossSpeqSPEQ Message Loss NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120004 |
alarmOscFiberMissingSpeqSPEQ not functioning, OSC Fiber(s) missing NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120005 |
alarmOptLowSpeqAlarm is raised at SPEQ Booster-amp, when the OPT is less than the provisioned PPC by 2dBm. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120006 |
alarmPpcOutOfRangeSpeqAdopted PPC exceeded the PPC range NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120007 |
alarmGainTooHighSpeqAuto Span Equalization Gain Out-of-Range, High - SPEQ calculated gain value is greater than the gain setting range of an EDFA type. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120008 |
alarmGainTooLowSpeqAuto Span Equalization Gain Out-of-Range, Low - SPEQ calculated gain value is lower than the gain setting range of an EDFA type. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120009 |
alarmGainAdoptFailedSpeqAlarm is raised when SPEQ Gain Adoption process fails. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.120010 |
speqCreationThis trap is sent every time an entity is created. No containers or other sub-entities in the chassis are reported created by this trap, the NMS must read these data. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.124001 |
speqDeletionThis trap is sent every time an entity is deleted. The sub-entities (containers, modules, etc.) are not reported deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.124002 |
speqStateChangeThis trap is sent when an entity state is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.124003 |
speqObjectChangeThis trap is sent when some object is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.124004 |
transientGainAutoAdjustSpeqSpan Equalization Gain auto adjustment is triggered by monitoring LOS clear condition. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.126000 |
transientGainNoAdjustSpeqSpan Equalization Gain Not Adjusted. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.126001 |
transientGainAdjustFailedSpeqSpan Equalization Gain Adjustment Failed. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.126002 |
transientWaitSpeqAuto Span Equalization is in progress; SPEQ-Server is busy, user must wait then request Span Equalization. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.126003 |
transientDenySpeqSpan Equalization request denied; operation could not be performed by the SPEQ-Server NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.126004 |
transientPpcAdoptSpeqPPC is auto calculated based on the adopted Gain for Brown-Field installations. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.126005 |
transientPpcLimitExceededSpeqProvisioned per-channel power level exceeded the allowable limit NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.126006 |
transientGainDynamicAdjustSpeqSpan Equalization Gain auto adjustment is triggered by dynamic optical power drift at Rx of the associated EDFA. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.11.4.14.1.0.126007 |
speqConditions OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.11.4.14.2 |
speqConditionSeverityTableThis table contains a severity value for each defined standing condition reported by an entity in the NE. SEQUENCE OF SpeqConditionSeverityEntry .1.3.6.1.4.1.2544.1.11.4.14.2.1 |
speqConditionSeverityEntryEach entry in the table represents the severity assigned to a condition.' SpeqConditionSeverityEntry .1.3.6.1.4.1.2544.1.11.4.14.2.1.1 |
speqConditionSeverityTypeThis object identifies the type of alarm. FspR7SpeqStandingConditionTypes .1.3.6.1.4.1.2544.1.11.4.14.2.1.1.1 |
speqConditionSeverityValueThis object identifies the severity assigned to this alarm.rw TrapAlarmSeverity (ADVA-MIB) .1.3.6.1.4.1.2544.1.11.4.14.2.1.1.2 |
speqCurrentConditionTable SEQUENCE OF SpeqCurrentConditionEntry .1.3.6.1.4.1.2544.1.11.4.14.2.2 |
speqCurrentConditionEntry SpeqCurrentConditionEntry .1.3.6.1.4.1.2544.1.11.4.14.2.2.1 |
speqCurrentConditionTypeList of all interface conditions FspR7SpeqStandingConditionTypes .1.3.6.1.4.1.2544.1.11.4.14.2.2.1.1 |
speqCurrentConditionSeverityThis object identifies the current severity of alarm.ro TrapAlarmSeverity (ADVA-MIB) .1.3.6.1.4.1.2544.1.11.4.14.2.2.1.2 |
speqCurrentConditionAffectThis object indicates the service impairment affect of the alarm.ro ServiceImpairment (ADVA-MIB) .1.3.6.1.4.1.2544.1.11.4.14.2.2.1.3 |
speqCurrentConditionTimeStampTimestampro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.11.4.14.2.2.1.4 |