CM-FACILITY-MIB
AI MIB Summary
The CM-FACILITY-MIB module enables SNMP-based monitoring of facility-level environmental and power infrastructure metrics, such as temperature, humidity, and power supply status, specifically for ADVA Optical Networking's F3 (FSP150CM/CC) product lines.
This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Main OID:
cmFacilityMIB.1.3.6.1.4.1.2544.1.12.4
1527
Objects
Active
Status
11
Dependencies
Imported Objects
Objects
1527 total| Object Name |
|---|
cmFacilityMIBThis module defines the Facility MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.4 |
cmFacilityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.4.1 |
cmEthernetAccPortTableA list of entries corresponding to Ethernet Access Port
Facilities for configuration purposes. SEQUENCE OF CmEthernetAccPortEntry .1.3.6.1.4.1.2544.1.12.4.1.1 |
cmEthernetAccPortEntryA conceptual row in the cmEthernetAccPortTable. CmEthernetAccPortEntry .1.3.6.1.4.1.2544.1.12.4.1.1.1 |
cmEthernetAccPortIndexAn integer index value used to uniquely identify
this Ethernet Access Port within a card.
Note that each Ethernet Access Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, cmEthernetAccPortIndex.
From release 5.6CC zero value becomes valid.
The zero value is used in Network Element level objects which contain
cmEthernetAccPortIndex in the index which is not-applicable for
these objects e.g. Pass-thru Flows, Shapers or Policers.ro Integer32 (0|1..65535) .1.3.6.1.4.1.2544.1.12.4.1.1.1.1 |
cmEthernetAccPortIfIndexThis object has the same value as ifIndex for
Ethernet Access Port. An integer index value used to
uniquely identify this Ethernet Access Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.2 |
cmEthernetAccPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.3 |
cmEthernetAccPortAdminStateThis object represents the Administrative State of the Ethernet
Access Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.4 |
cmEthernetAccPortOperationalStateThis object represents the Operational State of the Ethernet
Access Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.5 |
cmEthernetAccPortSecondaryStateThis object represents the Secondary State of the Ethernet
Access Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.6 |
cmEthernetAccPortMTUThis object provides the MTU on the Ethernet Access Port.
The object is made read-write for FSP150CC devices.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.7 |
cmEthernetAccPortMediaTypeThis object represents the type of Ethernet Media on the
Ethernet Access Port.rw EthernetMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.8 |
cmEthernetAccPortConfigSpeedThis object allows to configure the speed of the
Ethernet Access Port.rw EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.9 |
cmEthernetAccPortNegotiatedSpeedThis object provides the negotiated speed of the
Ethernet Access Port.ro EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.10 |
cmEthernetAccPortMDIXTypeThis object allows management of MDIX property on
Ethernet Access Port.rw CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.1.1.11 |
cmEthernetAccPortJumboFramesEnabledThis object allows enabling/disabling jumbo frames support on
the Ethernet Access Port. This object is only applicable for
Ethernet Access Port on R3.1CM NTU Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.12 |
cmEthernetAccPortSfpVendorNameThis object provides the vendor name of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.13 |
cmEthernetAccPortSfpPartNumberThis object provides the part number of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.14 |
cmEthernetAccPortSfpSerialNumberThis object provides the serial number of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.15 |
cmEthernetAccPortSfpDateOfManufactureThis object provides the date of manufacture of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.16 |
cmEthernetAccPortSfpConnectorValueThis object provides the SFP connector value.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.ro SfpConnectorValue (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.17 |
cmEthernetAccPortInitiateDiagThis object allows to initiate Etherjack diagnosis on the
Ethernet Access Port.rw CmEthernetDiagAction .1.3.6.1.4.1.2544.1.12.4.1.1.1.18 |
cmEthernetAccPortDiagnosePair1CondThis object provides diagnosis results for the cable Pair 1
on Ethernet Access Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.1.1.19 |
cmEthernetAccPortDiagnosePair2CondThis object provides diagnosis results for the cable Pair 2
on Ethernet Access Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.1.1.20 |
cmEthernetAccPortDiagnosePair3CondThis object provides diagnosis results for the cable Pair 3
on Ethernet Access Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.1.1.21 |
cmEthernetAccPortDiagnosePair4CondThis object provides diagnosis results for the cable Pair 4
on Ethernet Access Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.1.1.22 |
cmEthernetAccPortDiagnoseAutoNegCondThis object provides auto negotiation results of the diagnosis
test on Ethernet Access Port.ro CmDiagAutoNegCondType .1.3.6.1.4.1.2544.1.12.4.1.1.1.23 |
cmEthernetAccPortDiagnoseLpbkCondThis object provides port loopback results of the diagnosis
test on Ethernet Access Port.ro CmDiagLpbkCondType .1.3.6.1.4.1.2544.1.12.4.1.1.1.24 |
cmEthernetAccPortDiagnoseEfmLpbkCondThis object provides remote EFM loopback results of the diagnosis
test on Ethernet Access Port.ro CmDiagEfmOamLpbkCondType .1.3.6.1.4.1.2544.1.12.4.1.1.1.25 |
cmEthernetAccPortDiagnoseResultThis object provides results of the diagnosis
test in string form on Ethernet Access Port.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.26 |
cmEthernetAccPortDiagnoseTestStatusThis object provides the current status of the diagnosis
test on Ethernet Access Port.ro CmDiagTestStatus .1.3.6.1.4.1.2544.1.12.4.1.1.1.27 |
cmEthernetAccPortDiagnoseTestTimeThis object provides the time when diagnosis test was last executed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.28 |
cmEthernetAccPortLoopbackConfigThis object allows to initiate loopbacks on
on the Ethernet Access Port.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.1.1.29 |
cmEthernetAccPortLoopbackStatusThis object provides status of the current loopback
on the Ethernet Access Port.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.1.1.30 |
cmEthernetAccPortLoopbackTimeThis object allows to specify time for timed-loopbacks on
on the Ethernet Access Port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.31 |
cmEthernetAccPortLoopbackSwapSADAThis object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped.rw CmSwapSADAType .1.3.6.1.4.1.2544.1.12.4.1.1.1.32 |
cmEthernetAccPortOuterVlanLoopbackMaskThis object allows specification of the outer VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loopback. The various bit positions are:
1 Outer VLAN 1 Loopback Enabled
2 Outer VLAN 2 Loopback Enabled
4 Outer VLAN 3 Loopback Enabled
Value of 0 means that no VLANs are enabled.rw INTEGER .1.3.6.1.4.1.2544.1.12.4.1.1.1.33 |
cmEthernetAccPortOuterVlanLoopback1This object allows specification of the outer VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.34 |
cmEthernetAccPortOuterVlanLoopback2This object allows specification of the outer VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.35 |
cmEthernetAccPortOuterVlanLoopback3This object allows specification of the outer VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.36 |
cmEthernetAccPortInnerVlanLoopbackMaskThis object allows specification of the inner VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loopback. The various bit positions are:
1 Inner VLAN 1 Loopback Enabled
2 Inner VLAN 2 Loopback Enabled
4 Inner VLAN 3 Loopback Enabled
Value of 0 means that no VLANs are enabled.rw INTEGER .1.3.6.1.4.1.2544.1.12.4.1.1.1.37 |
cmEthernetAccPortInnerVlanLoopback1This object allows specification of the inner VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.38 |
cmEthernetAccPortInnerVlanLoopback2This object allows specification of the inner VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.39 |
cmEthernetAccPortInnerVlanLoopback3This object allows specification of the inner VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.1.1.40 |
cmEthernetAccPortLinkLossFwdEnabledThis object allows enabling/disabling link loss forwarding
on the Ethernet Access Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.41 |
cmEthernetAccPortLinkLossFwdSignalTypeThis object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled.
This object is applicable only for FSP150CM Release 3.1.
This object is deprecated henceforth.
Link Loss signalling will be supported using the object
cmEthernetAccPortLinkLossFwdTxActionType.rwdeprecated CmLinkLossFwdSignalType .1.3.6.1.4.1.2544.1.12.4.1.1.1.42 |
cmEthernetAccPortLinkLossFwdTriggerTypesThis object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled.rw CmLinkLossFwdTriggerTypes .1.3.6.1.4.1.2544.1.12.4.1.1.1.43 |
cmEthernetAccPortLinkLossFwdDelayThis object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.44 |
cmEthernetAccPortLinkLossFwdActiveThis object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.45 |
cmEthernetAccPortLinkLossFwdPartnerEnabledThis object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.46 |
cmEthernetAccPortLinkLossFwdLocalLinkIdThis object allows configuration of the Local Link Id on
Ethernet access port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.47 |
cmEthernetAccPortLinkLossFwdRemoteLinkIdsThis object allows enabling/disabling Remote Link Ids
on Ethernet access port. By setting the appropriate bit
positions, the Ethernet access port is able to distinguish
the remote side client ports from the Remote Link Down
PDUs coming from remote end.rw CmRemoteLinkIds .1.3.6.1.4.1.2544.1.12.4.1.1.1.48 |
cmEthernetAccPortOamIdOAM Id. This is unique EFM OAM sublayer port id.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.49 |
cmEthernetAccPortOamAdminDispositionEthernet Access Port's EFM OAM Disposition.
This object is applicable only for FSP150CM Release 3.1.
This object is deprecated henceforth.
With FSP150CC Release 4.1, this property is managed using
the Control Protocol Disposition tables.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.1.1.50 |
cmEthernetAccPortOamDiscoveryStateEthernet Access Port's OAM discovery state.ro CmOamDiscoveryState .1.3.6.1.4.1.2544.1.12.4.1.1.1.51 |
cmEthernetAccPortOamLocalVarRtrvsEnabledThis object allows specification of whether the Ethernet
Access Port supports sending variable response OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.52 |
cmEthernetAccPortOamLocalLinkEventsEnabledThis object allows specification of whether the Ethernet
Access Port supports interpreting Link Events.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.53 |
cmEthernetAccPortOamLocalOamLoopbacksSupportedThis object allows specification of whether the Ethernet
Access Port is capable of OAM remote loopback mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.54 |
cmEthernetAccPortOamLocalUnidirSupportEnabledThis object allows specification of whether the Ethernet
Access Port is capable of sending OAMPDUs when the receive path
is non-operational.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.55 |
cmEthernetAccPortOamLocalMaxPDUSizeThis object represents the largest OAMPDU, in octets,
supported by the Ethernet Access Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two is used.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.56 |
cmEthernetAccPortOamLocalModeThis object allows to configure the OAM sublayer entity in
either Active or Passive mode.rw CmOamMode .1.3.6.1.4.1.2544.1.12.4.1.1.1.57 |
cmEthernetAccPortOamRemoteMacAddressThis object allows retrieval of the Remote Mac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.58 |
cmEthernetAccPortOamRemoteVarRtrvsEnabledThis object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.59 |
cmEthernetAccPortOamRemoteLinkEventsEnabledThis object allows retrieval of whether the remote OAM
entity supports interpreting Link Events.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.60 |
cmEthernetAccPortOamRemoteOamLoopbacksSupportedThis object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.61 |
cmEthernetAccPortOamRemoteUnidirSupportEnabledThis object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.62 |
cmEthernetAccPortOamRemoteMaxPDUSizeThis object allows retrieval of the remote OAM
entity maximum OAMPDU size.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.63 |
cmEthernetAccPortOamRemoteModeThis object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode.ro CmOamMode .1.3.6.1.4.1.2544.1.12.4.1.1.1.64 |
cmEthernetAccPortModeThis object allows specification of whether the
Ethernet Access Port is in a connection-oriented
(offering VLAN based services) mode or connection-less
(offering MAC based services) mode.rw CmEthernetSvcPortMode .1.3.6.1.4.1.2544.1.12.4.1.1.1.65 |
cmEthernetAccPortSvcTypeThis object allows specification of whether the
Ethernet Access Port provides transparent port based services,
or multi-flow VLAN based services.rw CmEthernetSvcType .1.3.6.1.4.1.2544.1.12.4.1.1.1.66 |
cmEthernetAccPortRxPauseDispositionThis object allows management of RX pause frames on
Ethernet Access port. This object is applicable only
for FSP150CM Release 3.1.
This object is deprecated henceforth. With FSP150CC Release 4.1,
this property is managed using the Control Protocol
Disposition tables.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.1.1.67 |
cmEthernetAccPortTxPauseEnabledThis object allows enabling/disabling transmit pause frames on
Ethernet Access port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.68 |
cmEthernetAccPortAfpTypeThis object allows specification of the Acceptable Frame Policy on
Ethernet Access port. Users can specify whether the port supports
only tagged frames, only untagged frames or both tagged and
untagged frames.rw CmAfpType .1.3.6.1.4.1.2544.1.12.4.1.1.1.69 |
cmEthernetAccPortMDIXStatusThis object provides the current MDIX status of the
Ethernet Access port.ro CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.1.1.70 |
cmEthernetAccPortSfpReachThis object provides the SFP Reach in meters.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.71 |
cmEthernetAccPortSfpLaserWaveLengthThis object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetAccPortMediaType is fiber.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.72 |
cmEthernetAccPortSfpMediaTypeThis object provides the SFP Media Type.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp.ro SfpMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.73 |
cmEthernetAccPortOamEnabledThis object allows to manage the EFM OAM on Ethernet Access Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.74 |
cmEthernetAccPortOamAdminStateThis object provides the EFM OAM Admin State.ro CmOamAdminState .1.3.6.1.4.1.2544.1.12.4.1.1.1.75 |
cmEthernetAccPortShapingEnabledThis object allows to manage the Access Port Shaping.
When enabled, values in cmEthernetAccPortShapedSpeedLo and
cmEthernetAccPortShapedSpeedHi are applicable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.76 |
cmEthernetAccPortShapedSpeedLoThis object allows to specify the lower 32 bits of
the Access Port Shaped speed. This value is applicable
when cmEthernetAccPortShapingEnabled is enabled.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.77 |
cmEthernetAccPortShapedSpeedHiThis object allows to specify the higher 32 bits of
the Access Port Shaped speed. This value is applicable
when cmEthernetAccPortShapingEnabled is enabled.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.78 |
cmEthernetAccPortQinQEtherTypeThis object allows to specify the Q-in-Q Ether Type
on the Access Port. Setting this value to 0 will disable
the Q-in-Q override on the Access Port.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.79 |
cmEthernetAccPortRxPauseEnabledThis object allows to enable/disable the RX PAUSE
on the Access Port. This object is not applicable for FSP150CM NTU Card.
On NTU Card cmEthernetAccPortRxPauseDisposition object should be used to
provision RxPause disposition.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.80 |
cmEthernetAccPortAutoDiagEnabledThis object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.81 |
cmEthernetAccPortLinkLossFwdTxActionTypeThis object allows to specify the Access Port's behavior when
link loss forwarding trigger events occur on the Network Port.
This provides ability to configure per access port LLF behavior.rw CmLinkLossFwdTxActionType .1.3.6.1.4.1.2544.1.12.4.1.1.1.82 |
cmEthernetAccPortLinkLossFwdRxRLDLinkIdsThis object provides the received Remote Link IDs in
EFM RLD messages on the Access Port.ro CmRemoteLinkIds .1.3.6.1.4.1.2544.1.12.4.1.1.1.83 |
cmEthernetAccPortN2AVlanTrunkingEnabledThis object allows to enable or disable the VLAN trunking on
Ethernet Access port. Disabling VLAN trunking removes all
VLAN tags before transmitting traffic out of the access port.
This object is only applicable for connection-oriented,
evpl service type.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.84 |
cmEthernetAccPortA2NPushPVIDEnabledThis object allows to specify whether cmEthernetAccPortPortVlanId
value will be PUSHed on untagged frames or not in the
Access to Network direction. This object is only applicable
for connection-oriented, evpl service type.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.85 |
cmEthernetAccPortN2APopPVIDEnabledThis object allows to specify whether cmEthernetAccPortPortVlanId
value will be POPed in the
Network to Access direction. This object is only applicable
for connection-oriented, evpl service type.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.86 |
cmEthernetAccPortPortVlanIdThis object allows to specify the Ethernet Access Port VLAN Id
to PUSH on untagged frames in the Access to Network
direction. This object is only applicable for connection-oriented,
evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled
is set to true.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.87 |
cmEthernetAccPortPortVlanPriorityThis object allows to specify the Ethernet Access Port VLAN Priority
for the PUSHed VLAN tag (specified by cmEthernetAccPortPortVlanId)
on untagged frames in the Access to Network direction.
This object is only applicable for connection-oriented,
evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled
is set to true.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.88 |
cmEthernetAccPortPrioMapModeThis object allows to specify the Ethernet Access Port
Priority Mapping Mode used for classification of frames.
This object is only applicable for connection-oriented,
evpl service type.rw PriorityMapMode (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.89 |
cmEthernetAccPortSyncEEnabledThis object allows to specify whether the Ethernet Access Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable ports.
When enabled, on receive side
-port can extract the frequency of its input signal
and pass the recovered clock to the system clock
-port processes the ESMC(Ethernet Synchronization Messaging
Channel) and extracts the QL (when also QL enabled)
-port is eligible to be selected as a system clock reference
When enabled, on transmit side
-port's transmit clock is locked to the system clock
-port generates an ESMC to generate a QL (when also QL enabled)
When disabled, on receive side,
-port does not pass the recovered clock to the system clock
-port does not process the ESMC (if present)
-port is not eligible to be selected as a
system clock reference
When disabled, on transmit side
-port's output frequency may be synchronized to the system clock
-port does not generate an ESMC.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.90 |
cmEthernetAccPortQLModeEnabledThis object allows to specify whether the Ethernet Access Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetAccPortQLModeEnabled is set to true.
When enabled, on receive side
-port shall PEER the SSM (Sync Status Messages) slow protocol PDUs
and take appropriate action
When enabled, on transmit side
-port shall periodically (once a second) transmit QL TLV
information PDUs
When disabled, on receive side,
-port shall terminate and discard any SSM slow protocol PDUs
When disabled, on transmit side
-port shall not transmit any SSM slow protocol PDUs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.91 |
cmEthernetAccPortExpectedQLThis object allows to specify the expected QL when the
Ethernet Access Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetAccPortQLModeEnabled is set to true.
This object allows the user to set a minimum
expected received Quality Level on the port. The valid values
depend upon the SYNC entity's Network Clock Type. A value of
None represents that a minimum Quality Level is not expected.
The default value shall be None.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.92 |
cmEthernetAccPortAssumedQLThis object allows to specify the assumed QL on the
Ethernet Access Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaningful if the Network Clock Type
(see fsp150cm-sync.mib) is option1 and the
port's QL Mode is disabled and the port is being used as
an input reference source. Under these conditions,
the specified QL value is assumed to be the Quality Level of the
non-failed reference.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.93 |
cmEthernetAccPortReceivedQLThis object provides the Received QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable.This object is only applicable for
Synchronous Ethernet capable ports.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.94 |
cmEthernetAccPortTransmitQLThis object provides the Transmitted QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable. This object is only applicable for
Synchronous Ethernet capable ports.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.95 |
cmEthernetAccPortDeiEnableThis is a port level control to reset the DEI
(Drop Eligibility Indicator) bit in the S-Tag,
if the downstream equipment supports S-Tag TPID (EtherType) but
cannot handle DEI bit set. In the receive direction,
it uses the S-TAG DEI when enabled, else ignores it.
The following comment is NOT relevant to OSA8.1.1,
since this object is still supported by OSA8.1.1.
The object has been deprecated.
The respective configuration should be managed
by following objects:
cmEthernetAccPortRxDeiAction, cmEthernetAccPortTxDeiAction,
cmEthernetAccPortRxDeiOuterTagType, cmEthernetAccPortTxDeiOuterTagType.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.96 |
cmEthernetAccPortPcpDEEncTypeThis is a port level control that specifies the mode of drop
eligibility encoding in PCP bits of the VLAN tag.rw PcpDEEncType .1.3.6.1.4.1.2544.1.12.4.1.1.1.97 |
cmEthernetAccPortPcpDEPairsActionThis object allows the SNMP user to manage the Priority
Code Point (PCP) Drop Eligibility Pairs. When the
cmEthernetAccPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d,
the cmAccPortPcpDEPairTable can be used to specify
alternate pairs of priorities to specify drop eligibility/
ineligibility.rw PcpDEPairsAction .1.3.6.1.4.1.2544.1.12.4.1.1.1.98 |
cmEthernetAccPortSSMRemoteMacAddressThis object allows retrieval of the Remote Mac Address, when
the port is peering using SSM.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.99 |
cmEthernetAccPortXgePhyTypeThis object allows to specify the PHY type of 10G Ethernet Port.
10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY
and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps.
This attribute is only applicable for ports configured to work at speed-10G-full.
For other speeds the value of this object must be 'not-applicable' and cannot
be changed.rw XgePhyType .1.3.6.1.4.1.2544.1.12.4.1.1.1.100 |
cmEthernetAccPortLoopbackSourceMacControlEnabledThis object allows to Enable/Disable the Acc Port Source MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.101 |
cmEthernetAccPortLoopbackDestMacControlEnabledThis object allows to Enable/Disable the Acc Port Destination MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.102 |
cmEthernetAccPortLoopbackSourceMacAddressThis object allows to set Acc Port Source MAC Address for frame
matching when Acc Port Source MAC Control is enabled.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.103 |
cmEthernetAccPortLoopbackDestMacAddressThis object allows to set Acc Port Destination MAC Address for frame
matching when Acc Port Destination MAC Control is enabled.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.104 |
cmEthernetAccPortLoopbackBlockingEnabledThis object allows frame blocking when loopback is active.
- True: Blocks frames in the non-loopback direction
that match the PORT or VLAN received in the
non-loopback direction. Discards frames
in the loopback direction that match
the PORT or VLAN, but do not match
the MAC address criteria,
- False: No blocking of frames.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.105 |
cmEthernetAccPortRxDeiActionThis object allows to specify
the Receive DEI Action.rw RxDeiAction .1.3.6.1.4.1.2544.1.12.4.1.1.1.106 |
cmEthernetAccPortTxDeiActionThis object allows to specify
the Transmit DEI Action.rw TxDeiAction .1.3.6.1.4.1.2544.1.12.4.1.1.1.107 |
cmEthernetAccPortRxDeiOuterTagTypeThis object allows to specify
the Receive DEI Outer Tag Type.rw DeiOuterTagType .1.3.6.1.4.1.2544.1.12.4.1.1.1.108 |
cmEthernetAccPortTxDeiOuterTagTypeThis object allows to specify
the Transmit DEI Outer Tag Type.rw DeiOuterTagType .1.3.6.1.4.1.2544.1.12.4.1.1.1.109 |
cmEthernetAccPortLaserWDMChannelChannel number of WDM tunable XFP setting.rw SfpChannelIdentifier .1.3.6.1.4.1.2544.1.12.4.1.1.1.110 |
cmEthernetAccPortLaserIsTunableChannel number of WDM tunable XFP setting.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.111 |
cmEthernetAccPortLaserFrequencyChannel number of WDM tunable XFP setting.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.112 |
cmEthernetAccPortMediaTypeAutoSelectedThis object provides the auto selected Ethernet Media of the
Ethernet Access Port.ro EthernetMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.113 |
cmEthernetAccPortLowLatencyQueuingEnabledThis object allows to Enable/Disable the Low Latency Queuing on
the Ethernet Access Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.114 |
cmEthernetAccPortA2nSwapPriorityVIDEnabledThis object allows to Enable/Disable
the Swapping of Priority Vlan Id in the A2N direction.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.115 |
cmEthernetAccPortN2aSwapPriorityVIDEnabledThis object allows to Enable/Disable
the Swapping of Priority Vlan Id in the N2A direction.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.116 |
cmEthernetAccPortSwapPriorityVIDThis object allows to specify the value of
Vlan Id for the Swapping of Priority Vlan Id operation
for both the A2N and N2A direction.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.117 |
cmEthernetAccPortDiagnosticMacAddressThis object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.1.1.118 |
cmEthernetAccPortIngressCOSPriorityIndicates which VLAN tag to use for PCP Priority to COS mapping
when the port Priority Map Mode is 802.1p. Supported values are
inner-vlantag and outer-vlantag. This attribute is only applicable
on products when Flowpoint Model is supported.
inner-vlantag: The inner VLAN tag PCP Priority of a frame is
used for ingress COS mapping. A frame with no inner VLAN tag
(untagged or single-tagged) will have a COS equal to the default
COS of the port.
outer-vlantag: The outer VLAN tag PCP Priority of a frame is used
for ingress COS mapping. A frame with no outer VLAN tag (untagged)
will have a COS equal to the default COS of the port.
This attribute has been deprecated and is not supported. Now,
the Priority Map Mode indicates whether it is inner or outer.
Use priomap-8021p(4) for outer and priomap-8021p-inner(5)
for inner.rwdeprecated VlanTagType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.1.1.119 |
cmEthernetAccPortDefaultCOSThe COS assigned to a frame that does not have a valid COS identifier
for the Priority Map Mode of the port. This attribute is only applicable
on products when Flowpoint Model is supported.
This value is assigned to a frame received on a port when:
- the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag;
and the frame is untagged
- the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag;
and the frame has a single VLAN tag
- the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag;
and the frame is untagged
- the cmEthernetAccPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype
- the cmEthernetAccPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype.
This attribute has been deprecated and is not supported. The
Default COS is determined from the flowpoint's associated
Priority Mapping Profle.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.4.1.1.1.120 |
cmEthernetAccPortTrafficModelThe Traffic Management connection model available for the port.
- accessFlow: NID Traffic Connection model.
- flowpoint: Multipoint and Aggregation Traffic Connection model.rw EthernetPortTrafficModel .1.3.6.1.4.1.2544.1.12.4.1.1.1.121 |
cmEthernetAccPortCpdTableA list of entries corresponding to Ethernet Access Port
Control Protocol Disposition.
This table is only
applicable for FSP150CM Hub Shelf Release 3.x. SEQUENCE OF CmEthernetAccPortCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.2 |
cmEthernetAccPortCpdEntryA conceptual row in the cmEthernetAccPortCpdTable.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Access Port. CmEthernetAccPortCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.2.1 |
cmEthernetAccPortCpdIndexAn arbitrary integer index value used to uniquely identify
this CPD Service Entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.2.1.1 |
cmEthernetAccPortCpdFilterTypeThis enables specification of type of CPD Filter.ro CmControlProtocolFilterType .1.3.6.1.4.1.2544.1.12.4.1.2.1.2 |
cmEthernetAccPortCpdFilterDescrThis provides description of CPD Filter.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.2.1.3 |
cmEthernetAccPortCpdDispTypeThis enables specification of disposion type of CPD Filter.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.2.1.4 |
cmEthernetAccPortCpdMacAddressMatchThis enables provides the Filter MAC Address to match.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.2.1.5 |
cmEthernetAccPortCpdMacAddressMaskThis enables provides the Filter MAC Address Mask to match.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.2.1.6 |
cmEthernetAccPortCpdEthertypeThis enables provides the Filter Ethertype to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.2.1.7 |
cmEthernetAccPortCpdEthertypeMaskThis enables provides the Filter Ethertype Mask to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.2.1.8 |
cmEthernetAccPortCpdSubtypeThis enables provides the Filter Subtype to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.2.1.9 |
cmEthernetAccPortCpdSubtypeMaskThis enables provides the Filter Subtype Mask to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.2.1.10 |
cmEthernetAccPortClbTableA list of entries corresponding to Ethernet Access Port
Cable Length Benchmark. SEQUENCE OF CmEthernetAccPortClbEntry .1.3.6.1.4.1.2544.1.12.4.1.3 |
cmEthernetAccPortClbEntryA conceptual row in the cmEthernetAccPortClbTable.
These entries represent Cable Length Benchmarks
on the Ethernet Access Port. CmEthernetAccPortClbEntry .1.3.6.1.4.1.2544.1.12.4.1.3.1 |
cmEthernetAccPortClbIndexAn integer index value used to uniquely identify
this Cable Length Benchmark Entry specification.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.3.1.1 |
cmEthernetAccPortClbEnabledThis enables specification of Cable Length Benchmark entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.3.1.2 |
cmEthernetAccPortClbLengthCable length of Cable Points Entry. The cable length is of
the form XXX[.YY] where XX can be any integer value and YY
allows precision of 2 decimals after the floating point. Note
that .YY is optional.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.3.1.3 |
cmEthernetAccPortClbDescrA textual string containing description of cable span.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.3.1.4 |
cmFlowTableA list of entries corresponding to Ethernet Flows
for configuration purposes. If the corresponding
Ethernet Access Port's cmEthernetAccPortMode is
connection-oriented and cmEthernetAccPortSvcType is epl,
there exists a single Flow in this table.
No Flow creation or deletion is allowed on this table
for FSP150CM NTU based services.
Since Fsp150 R5.6CC release this table is used to manage 2 types of Flows:
- Access Port Flow as in the previous releases
- Tranparent Flow (new in 5.6CC)
A Transparent Flow is Flow between Network-1 and Network-2 ports used
to convey pass-thru traffic in the ring topology e.g. ERP.
Few of the existing attributes will have new semantix for Transperent Flow.
Transparent Flow is a NE level object and hence has different indexing
than the Access Port Flow. The valid indices are neIndex and cmFlowIndex.
The remaining indices will have constant values as follows:
shelfIndex = 1
slotIndex = 255
cmEthernetAccPortIndex = 0 SEQUENCE OF CmFlowEntry .1.3.6.1.4.1.2544.1.12.4.1.4 |
cmFlowEntryA conceptual row in the cmFlowTable. These entries represent
an Ethernet Flow. CmFlowEntry .1.3.6.1.4.1.2544.1.12.4.1.4.1 |
cmFlowIndexThe integer index value corresponding to an Ethernet Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.1 |
cmFlowCircuitNameThis object allows SNMP management entities to provide a
circuit identifier with the Flow.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.4.1.2 |
cmFlowAdminStateThis object represents the Administrative State of the Flow.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.4.1.3 |
cmFlowOperationalStateThis object represents the Operational State of the Flow.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.4.1.4 |
cmFlowSecondaryStateThis object represents the Secondary State of the Flow.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.4.1.5 |
cmFlowTypeThis object represents the type of the Flow.rw CmFlowType .1.3.6.1.4.1.2544.1.12.4.1.4.1.6 |
cmFlowMultiCOSThis object allows specification of multiple COS (Class of Service)
Flow.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.7 |
cmFlowA2NCIRThis object represents the Commited Information
Rate(CIR) of an Flow in the Access to Network (A2N) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settable. This value represents the lower
32-bits of the CIR. For a Multi COS flow, this value
is settable only at creation time.
In case of Tranparent Flow this object represents N1 to N2 CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.8 |
cmFlowA2NEIRThis object represents the Excess Information
Rate(EIR) on an Flow in the Access to Network (A2N) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settable. This value represents the lower
32-bits of the CIR. For a Multi COS flow, this value
is settable only at creation time.
In case of Tranparent Flow this object represents N1 to N2 EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.9 |
cmFlowN2ARateLimitingEnabledThis object allows management of the N2A rate limiting,
independent of A2N rate limiting. When not enabled,
N2A specification is the same as A2N.
This object is not applicable for Tranparent Flow; the value should be FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.10 |
cmFlowN2ACIRThis object represents the Commited Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
For a portbased Flow, this object is not settable. This is
only settable if cmFlowN2ARateLimitingEnabled is enabled.
In case of Tranparent Flow this object represents N2 to N1 CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.11 |
cmFlowN2AEIRThis object represents the Excess Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
For a portbased Flow, this object is not settable. This is
only settable if cmFlowN2ARateLimitingEnabled is enabled.
In case of Tranparent Flow this object represents N2 to N1 EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.12 |
cmFlowStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.13 |
cmFlowRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmFlowRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmFlowRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmFlowRowStatus object may be modified if
the associated instance of this object is equal to active(1).
Note that flow creation and deletion is only supported
with access port in connection-oriented evpl mode.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.14 |
cmFlowTrafficTypeThis object provides information on the type of traffic flow
supported by the system, i.e.'shaped-only' flows (support
only shaping) or 'policed-shaped' (support policing and shaping) flows.
'shaped-only' flow exists for FSP150CM NTU and CPMR access ports.
'policed-shaped' flows are supported in FSP150CC devices.
Please note that this object refers to how traffic profiles
are managed on devices and is independent of the policing enabling/disabling
feature.ro FlowTrafficType .1.3.6.1.4.1.2544.1.12.4.1.4.1.15 |
cmFlowCOSThis object allows specification of the COS (Class of Service)
value for the Traffic Flow. This value is used at flow creation
time to identify the COS level of the A2N and N2A shaper.
In case of a multi-COS flow, this value is not applicable
when multiple policers/shapers exist on the flow.
This object is also applicable to specify the COS of a
connection-oriented epl service.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.16 |
cmFlowVlanMemberListThis object is applicable only when Port is in connection-oriented
evpl mode. This attribute is mandatory if creation of
connection-oriented evpl regular flow is desired.
It allows specification of VLAN members of the Flow.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* or X (vlan X with all priorities),
*-Y (all vlans with priority Y), and X1:X2
(range of vlans from X1 to X2, all priorities). Members
with specific VLAN Id and specific VLAN Priority are not supported.
Once the flow is created, this attribute can only be updated
using cmFlowAction and cmFlowActionVlan objects.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.4.1.17 |
cmFlowActionThis object is applicable only when Port is in connection-oriented
evpl mode and the cmFlowType is regular. This object allows to
add or remove the VLAN members specified by
cmFlowActionVlan object. SNMP manager must first
configure the VLAN member to be added/removed in the object
cmFlowActionVlan and then should specify
cmFlowAction on whether to add/remove the specified
VLAN member.rw FlowVlanActionType .1.3.6.1.4.1.2544.1.12.4.1.4.1.18 |
cmFlowActionVlanThis object is applicable only when Port is in connection-oriented
evpl mode. This object allows adding/removing VLAN members
to a connection-oriented evpl regular flow.
VLAN member is of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* (vlan X with all priorities),
*-Y (all vlans with priority Y), and X1:X2
(range of vlans from X1 to X2, all priorities).
Members with specific VLAN Id and
specific VLAN Priority are not supported.
In order to add/remove VLAN member to a flow, user must
specify this object with appropriate VLAN and then invoke
cmFlowAction.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.4.1.19 |
cmFlowUntaggedMemberEnabledThis object is applicable only when Port is in connection-oriented
evpl mode for a regular flow as well as default flow.
This object allows to specify whether or not the flow
supports untagged traffic.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.20 |
cmFlowA2NCIRHiThis object represents the Commited Information
Rate(CIR) of an Flow in the Access to Network (A2N) direction.
This value represents the upper 32 bits of CIR (lower is
provided in cmFlowA2NCIR). For a Multi COS flow, this value
is settable only at creation time.
In case of Tranparent Flow this object represents N1 to N2 CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.21 |
cmFlowA2NEIRHiThis object represents the Excess Information
Rate(EIR) on an Flow in the Access to Network (A2N) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settable. This value represents the higher
32-bits of the CIR. For a Multi COS flow, this value
is settable only at creation time.
In case of Tranparent Flow this object represents N1 to N2 EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.22 |
cmFlowN2ACIRHiThis object represents the Commited Information
Rate(CIR) of an Flow in the Network to Access (N2A) direction.
This value represents the upper 32 bits of CIR (lower is
provided in cmFlowN2ACIR). For a Multi COS flow, this value
is settable only at creation time. This is
only settable if cmFlowN2ARateLimitingEnabled is enabled.
In case of Tranparent Flow this object represents N2 to N1 CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.23 |
cmFlowN2AEIRHiThis object represents the Excess Information
Rate(EIR) on an Flow in the Network to Access (N2A) direction.
For a portbased Flow(FSP150CM NTU, CPMR),
this object is not settable. This value represents the higher
32-bits of the CIR. For a Multi COS flow, this value
is settable only at creation time. This is
only settable if cmFlowN2ARateLimitingEnabled is enabled.
In case of Tranparent Flow this object represents N2 to N1 EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.24 |
cmFlowHCOSMgmtEnabledThis object allows management of Hierarchical COS on the Flow.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.25 |
cmFlowGuaranteedA2NBandwidthLoThis object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
guaranteed bandwidth (lower 32 bits) of a flow.
This value must be greater than or equal to the sum of all
individual COS CIRs.
In case of Tranparent Flow this object represents N1 to N2 and N2 to N1
guaranteed bandwidth.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.26 |
cmFlowGuaranteedA2NBandwidthHiThis object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
guaranteed bandwidth (upper 32 bits) of a flow.
This value must be greater than or equal to the sum of all
individual COS CIRs.
In case of Tranparent Flow this object represents N1 to N2 and N2 to N1
guaranteed bandwidth.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.27 |
cmFlowMaximumA2NBandwidthLoThis object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
maximum bandwidth (lower 32 bits) of a flow. This is the peak
limit of a flow. This value must be greater than or equal
to the sum of all individual COS CIRs.
In case of Tranparent Flow this object represents N1 to N2 and N2 to N1
maximum bandwidth.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.28 |
cmFlowMaximumA2NBandwidthHiThis object supports the Hierarchical Class of Service (HCOS)
feature. It is only applicable for a flow with multiple
class of services. This allows the provisioning of
maximum bandwidth (upper 32 bits) of a flow. This is the peak
limit of a flow. This value must be greater than or equal
to the sum of all individual COS CIRs.
In case of Tranparent Flow this object represents N1 to N2 and N2 to N1
maximum bandwidth.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.29 |
cmFlowCTagControlThis object allows specification of the tag management
operation on the C-TAG. Supported types are 'push', 'pushvid',
'swapvid' and 'none'. If the type is 'push',
the VLAN Id (cmFlowCTagVlanId) and priority
(cmFlowCTagVlanPriority) are pushed onto the frame;
if the type is 'pushvid', only the VLAN Id (12 bits) is pushed,
the Priority is copied from incoming tag's priority;
if the type is 'swapvid', only the VLAN Id (12 bits) are
swapped with the specified cmFlowCTagVlanId;
if the type is 'none', no C-TAG management is performed.
This object is not applicable for Tranparent Flow; the value should be 'none'.rw FlowTagControl .1.3.6.1.4.1.2544.1.12.4.1.4.1.30 |
cmFlowCTagVlanIdThis object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowCTagControl.
It is applicable for 'push', 'swapvid' and 'pushvid'
control types.
This object is not applicable for Tranparent Flow; the value should be 0.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.4.1.31 |
cmFlowCTagVlanPriorityThis object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowCTagControl.
It is applicable for 'push' control type.
This object is not applicable for Tranparent Flow; the value should be 0.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.4.1.32 |
cmFlowCTagMatchRxPrioThis object is used to specify whether the C-TAG priority
be used or ignored for traffic in the N2A direction.
This is only applicable if cmFlowCTagControl
is 'push'.
This object is not applicable for Tranparent Flow; the value should be FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.33 |
cmFlowSTagControlThis object allows specification of the tag management
operation on the S-TAG. Supported types are 'push', 'swapvid', and 'none'.
If the type is 'push', the VLAN Id (cmFlowSTagVlanId) and priority
(cmFlowSTagVlanPriority) are pushed onto the frame; if the type is
'swapvid', the VLAN Id(12 bits) is swapped with the specified
cmFlowSTagVlanId; type is 'none', no S-TAG manament is performed.
This object is not applicable for Tranparent Flow; the value should be 'none'.rw FlowTagControl .1.3.6.1.4.1.2544.1.12.4.1.4.1.34 |
cmFlowSTagVlanIdThis object allows specification of the VLAN Id to
be pushed, based on the value of cmFlowSTagControl.
It is applicable for 'push' control type.
This object is not applicable for Tranparent Flow; the value should be 0.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.4.1.35 |
cmFlowSTagVlanPriorityThis object allows specification of the VLAN Priority to
be pushed, based on the value of cmFlowSTagControl.
It is applicable for 'push' control type.
This object is not applicable for Tranparent Flow; the value should be 0.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.4.1.36 |
cmFlowOuterTagPrioEnabledThis object is used to specify whether the flow
participates in outer-tag priority swap. The Priority
Mapping Table cmPrioMapTable allows the A2N outer-tag
priority to be specified based on incoming priority at
Access Port (based on priority mapping mode - 802.1P, TOS, DSCP).
This object is not applicable for Tranparent Flow; the value should be FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.37 |
cmFlowN2ACOSPriorityTagTypeThis object is used to specify whether the flow
uses the inner-tag or the outer-tag in determining the COS (Class of Service) in the
N2A direction. This object is applicable in the case of a Multi COS Flow.
This object is not supported for Tranparent Flow;rw VlanTagType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.4.1.38 |
cmFlowESFramesLossThresholdThis object is used to specify the number of frames lost
per flow that starts counting Errored Seconds (ES) on the flow.
This functionality is applicable if the flow is monitored
using the Y.1731 ESA functionality.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.39 |
cmFlowSESFramesLossThresholdRatioThis object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the flow.
This functionality is applicable if the flow is monitored
using the Y.1731 ESA functionality.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.40 |
cmFlowPolicingEnabledThis object is applicable only when Port is in connection-oriented mode.
This object is applicable to both epl and evpl mode flows.
This object allows to enable/disable the policing function on the flow.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.41 |
cmFlowPreserveSTagPropertiesThis object is applicable only when Port is in connection-oriented mode.
This object is applicable to evpl mode Regular flows, when S-TAG control
is specified as SWAPVID.
When enabled, this attribute preserves the EtherType (0x88a8) and
DEI (Drop Eligibility Indicator) bit
in the incoming S-TAG (both from Access and Network Port perspective)
into the outgoing S-TAG.
When not enabled, the incoming tag is considered as a Q-TAG (0x8100)
and both EtherType and CFI (Canonical Form Indicator) bits are over-written
by the S-TAG Ethertype (0x88a8) and DEI bit.
This object is not applicable for Tranparent Flow; the value should be FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.42 |
cmFlowInnerTagPrioEnabledThis object is used to specify whether the flow
participates in inner-tag (second) priority swap. The Priority
Mapping Table cmPrioMapTable allows the A2N inner-tag
priority to be specified based on incoming priority at
Access Port (based on priority mapping mode - 802.1P, TOS, DSCP).
This object is not applicable for Tranparent Flow; the value should FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.43 |
cmFlowN2AOuterTagPrioEnabledThis object is used to specify whether the flow
participates in outer-tag priority swap in the A2N direction.
The Priority Mapping Table cmNetPortPrioMapTable allows the N2A outer-tag
priority to be specified based on incoming priority at
Network Port (based on priority mapping mode - 802.1P, TOS, DSCP).
This object is not applicable for Tranparent Flow; the value should be FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.44 |
cmFlowA2NShapingTypeThis object is used to specify whether the traffic in A2N direction
passing through this flow is shaped by port-level or flow-level Shapers.
In case of portbased flows the value of this attribute is flow-based and
cannot be changed. In case of regular and default flows Fsp150 products
may support both port-based and flow-based shaping.rw ShapingType .1.3.6.1.4.1.2544.1.12.4.1.4.1.45 |
cmFlowN2AShapingTypeThis object is used to specify whether the traffic in N2A direction
passing through this flow is shaped by port-level or flow-level Shapers.
In case of portbased flows the value of this attribute is flow-based and
cannot be changed. In case of regular and default flows Fsp150 products
may support both port-based and flow-based shaping.rw ShapingType .1.3.6.1.4.1.2544.1.12.4.1.4.1.46 |
cmFlowSTagMatchRxPrioThis object indicates whether the S-TAG priority
is used or ignored for traffic in the N2A direction.
This is only applicable if cmFlowSTagControl
is 'push'.
This object is not applicable for Tranparent Flow; the value should be FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.47 |
cmFlowAutoBandwidthConfigEnabledThis object is applicable for Flows on the PWE3 Ethernet Backplane Port.
When set to TRUE bandwidth of this Flow will be automatically adjusted when
PWE3 SATOPs are provisioned. The bandwidth will be adjusted based on the
TDM entities of associated SATOPs.
Flow on ports other than PWE3 Ethernet Backplane Port will always have
this value set to FALSE and it is not configurable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.48 |
cmFlowPort1This object specifies a physical or logical port on the Access side of the
Flow. This can be Access Port, Access LAG or Access Split Horizion Group.
In case of Tranparent Flow this object specifies port1 of the Flow which is
Network-1.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.49 |
cmFlowPort2This object specifies a physical or logical port on the Network side of the
Flow. This can be Network Port, Network LAG, Network Split Horizion Group
ERP or Protection Group.
In case of Tranparent Flow this object specifies port2 of the Flow which is
Network-2.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.50 |
cmFlowPolicingControlThis object specifies the direction(s) in which Poling is enabled on traffic
within this Flow when cmFlowPolicingEnabled is TRUE.rw PolicingControl .1.3.6.1.4.1.2544.1.12.4.1.4.1.51 |
cmFlowAutoCIRPercentageThis object specifies the percentage of available CIR on the Network
ports assigned to this Flow when cmFlowAutoBandwidthConfigEnabled is TRUE.
The flow guaranteedBW is set to available BW multiplied by this value.
This object is only applicable to Tranparent Flow.
The value of this object should be 0 for Access Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.52 |
cmFlowLoopAvoidanceObjectThis object specifies the Loop Avoidance instance to which this Flow belongs.
This object is appicable only for Transparent Flow and should point to the
ERP instance for which this Flows carries pass-thru traffic.
In case of Access Flow the value of this object should be zeroDotZero.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.53 |
cmFlowConfigTypeThis object specifies if this Flow is an Access Flow or Pass-thru Flow.ro FlowConfigType .1.3.6.1.4.1.2544.1.12.4.1.4.1.54 |
cmFlowN2NForwardingEnabledThis object is used to specify whether n2n forwarding
is enabled on particular Flow.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.55 |
cmFlowA2NMulticastRateLimitControlWhether multicast frames are limited per Flow.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.56 |
cmFlowA2NMulticastRateLimitLoThe rate limit for multicast packets per Flow.
When cmFlowA2NMulticastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object represents the low-order 32-bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.57 |
cmFlowA2NMulticastRateLimitHiThe rate limit for multicast packets per Flow.
When cmFlowA2NMulticastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object represents the high-order 32-bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.58 |
cmFlowA2NBroadcastRateLimitControlWhether broadcast frames are limited per Flow.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.59 |
cmFlowA2NBroadcastRateLimitLoThe rate limit for multicast packets per Flow.
When cmFlowA2NBroadcastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object represents the low-order 32-bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.60 |
cmFlowA2NBroadcastRateLimitHiThe rate limit for multicast packets per Flow.
When cmFlowA2NBroadcastRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object represents the high-order 32-bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.61 |
cmFlowA2NCombinedRateLimitControlWhether both multicast and broadcast frames are limited per Flow.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.62 |
cmFlowA2NCombinedRateLimitLoThe rate limit for multicast packets per Flow.
When cmFlowA2NCombinedRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object represents the low-order 32-bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.63 |
cmFlowA2NCombinedRateLimitHiThe rate limit for multicast packets per Flow.
When cmFlowA2NCombinedRateLimiteControl is set and value is 0,
then all multicast frames are dropped.
This object represents the high-order 32-bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.4.1.64 |
cmFlowRefPrioMapProfileThis object used to specify the flow's profile.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.65 |
cmFlowRefEoMplsPwObjectThis object specifies EoMpls Pw object OID.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.66 |
cmFlowRefN2APrioMapProfileThis object used to specify the flow's N2A direction profile.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.67 |
cmFlowSecureBlockingEnabledThis object can be used to enable/disable secure block.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.68 |
cmFlowRefConnectGuardFlowListThis object specifies the secure flow list,
it should be f3ConnectGuardFlowIndex value list split with comma.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.69 |
cmFlowSecureStateListThis object specifies the secure state list,
it should be secure state value list and split with comma.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.4.1.70 |
cmFlowCpdTableA list of entries corresponding to Flow
Control Protocol Disposition.
This table is only
applicable for FSP150CM Hub Shelf Release 3.x. SEQUENCE OF CmFlowCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.5 |
cmFlowCpdEntryA conceptual row in the cmFlowCpdTable.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Network Port. CmFlowCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.5.1 |
cmFlowCpdIndexAn arbitrary integer index value used to uniquely identify
this CPD Service Entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.5.1.1 |
cmFlowCpdFilterTypeThis enables specification of type of CPD Filter.ro CmControlProtocolFilterType .1.3.6.1.4.1.2544.1.12.4.1.5.1.2 |
cmFlowCpdFilterDescrThis provides description of CPD Filter.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.5.1.3 |
cmFlowCpdDispTypeThis enables specification of disposion type of CPD Filter.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.5.1.4 |
cmFlowCpdMacAddressMatchThis enables provides the Filter MAC Address to match.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.5.1.5 |
cmFlowCpdMacAddressMaskThis enables provides the Filter MAC Address Mask to match.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.5.1.6 |
cmFlowCpdEthertypeThis enables provides the Filter Ethertype to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.5.1.7 |
cmFlowCpdEthertypeMaskThis enables provides the Filter Ethertype Mask to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.5.1.8 |
cmFlowCpdSubtypeThis enables provides the Filter Subtype to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.5.1.9 |
cmFlowCpdSubtypeMaskThis enables provides the Filter Subtype Mask to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.5.1.10 |
cmQosShaperTableA list of entries corresponding to Ethernet Quality of Service
Shaper for configuration purposes. SEQUENCE OF CmQosShaperEntry .1.3.6.1.4.1.2544.1.12.4.1.6 |
cmQosShaperEntryA conceptual row in the cmQosShaperTable.
These entries represent a Quality of Service Shaper. CmQosShaperEntry .1.3.6.1.4.1.2544.1.12.4.1.6.1 |
cmQosShaperTypeIndexThe unique index value corresponding to a Quality of Service
Shaper's direction.
Values 1 and 2 are applicable to the Access Flow Shaper:
- value of 1 stands for A2N direction,
- value of 2 stands for N2A direction.
Values 3 and 4 are applicable to Pass-thru Flow Shaper (new in 5.6CC release):
- value of 3 stands for N1toN2 direction
- value of 4 stands for N2toN1 directionrw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.1 |
cmQosShaperIndexThe unique integer index value corresponding to a
Quality of Service Shaper.
In release 5.6CC the range is extended to 1..16 to support duplicate
A2N shapers on a Flow. The duplicate shapers are created under a Flow
if network interface of the Flow is ERP Group or Split Horizon Group.
In case of multi-cos Flow indices 1..8 represent shapers of COS 0..7
going to Network 1 port; indices 9..16 represent shapers for COS 0..7
going to Network 2 port.
In case of single-cos Flow index 1 represents shaper going to Network 1
port; index 9 represents shaper going to Network 2 port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.2 |
cmQosShaperDirectionThe direction of the Quality of Service Shaper.ro TrafficDirection (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.6.1.3 |
cmQosShaperAdminStateThis object represents the Administrative State of
the QOS Shaper.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.6.1.4 |
cmQosShaperOperationalStateThis object represents the Operational State of the QOS Shaper.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.6.1.5 |
cmQosShaperSecondaryStateThis object represents the Secondary State of the QOS Shaper.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.6.1.6 |
cmQosShaperCIRThis object represents the Commited Information
Rate(CIR) (Lower 32 bits)of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.7 |
cmQosShaperCBSThis object represents the Commited Burst Size (CBS) of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.8 |
cmQosShaperEIRThis object represents the Excess Information
Rate(EIR) (Lower 32 bits) of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.9 |
cmQosShaperEBSThis object represents the Excess Burst Size (EBS) of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.10 |
cmQosShaperBufferSizeThis object represents the Buffer Size of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.11 |
cmQosShaperStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.6.1.12 |
cmQosShaperRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmQosShaperRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmQosShaperRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmQosShaperRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.6.1.13 |
cmQosShaperCOSThis object provides the COS (Class of Service)
value for the QOS Shaper.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.14 |
cmQosShaperCIRHiThis object represents the Commited Information
Rate(CIR) (Higher 32 bits) of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.15 |
cmQosShaperEIRHiThis object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.16 |
cmQosShaperSoamCIRLoThis object represents the Soam Commited Information
Rate(SOAM-CIR) (Lower 32 bits) of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.17 |
cmQosShaperSoamCIRHiThis object represents the Soam Commited Information
Rate(SOAM-CIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.18 |
cmQosShaperSoamEIRLoThis object represents the Soam Excess Information
Rate(SOAM-EIR) (Lower 32 bits) of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.19 |
cmQosShaperSoamEIRHiThis object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.20 |
cmQosShaperWredGreenMinQueueThresholdThis object represents the Wred green packet min queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.21 |
cmQosShaperWredGreenMaxQueueThresholdThis object represents the Wred green packet max queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.22 |
cmQosShaperWredGreenDropProbabilityThis object represents the Wred green packet drop probability.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.23 |
cmQosShaperWredYellowMinQueueThresholdThis object represents the Wred yellow packet min queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.24 |
cmQosShaperWredYellowMaxQueueThresholdThis object represents the Wred yellow packet max queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.25 |
cmQosShaperWredYellowDropProbabilityThis object represents the Wred yellow packet drop probability.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.6.1.26 |
cmEthernetNetPortTableA list of entries corresponding to Ethernet Network Port
Facilities for configuration purposes. SEQUENCE OF CmEthernetNetPortEntry .1.3.6.1.4.1.2544.1.12.4.1.7 |
cmEthernetNetPortEntryA conceptual row in the cmEthernetNetPortTable. CmEthernetNetPortEntry .1.3.6.1.4.1.2544.1.12.4.1.7.1 |
cmEthernetNetPortIndexAn integer index value used to uniquely identify
this Ethernet Network Port within a card.
Note that each Ethernet Network Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, cmEthernetNetPortIndex.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.1 |
cmEthernetNetPortIfIndexThis object has the same value as ifIndex for
Ethernet Network Port. An integer index value used to
uniquely identify this Ethernet Network Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.2 |
cmEthernetNetPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.3 |
cmEthernetNetPortAdminStateThis object represents the Administrative State of the Ethernet
Network Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.4 |
cmEthernetNetPortOperationalStateThis object represents the Operational State of the Ethernet
Network Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.5 |
cmEthernetNetPortSecondaryStateThis object represents the Secondary State of the Ethernet
Network Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.6 |
cmEthernetNetPortMTUThis object provides the MTU on the Ethernet Network Port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.7 |
cmEthernetNetPortMediaTypeThis object represents the type of Ethernet Media on the
Ethernet Network Port.rw EthernetMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.8 |
cmEthernetNetPortConfigSpeedThis object allows to configure the speed of the
Ethernet Network Port.rw EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.9 |
cmEthernetNetPortNegotiatedSpeedThis object provides the negotiated speed of the
Ethernet Network Port.ro EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.10 |
cmEthernetNetPortMDIXTypeThis object allows management of MDIX property on
Ethernet Network Port.rw CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.7.1.11 |
cmEthernetNetPortJumboFramesEnabledThis object allows enabling/disabling jumbo frames support on
the Ethernet Network Port. This object is only applicable for
Ethernet Network Port on R3.1CM NTU Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.12 |
cmEthernetNetPortSfpVendorNameThis object provides the vendor name of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.13 |
cmEthernetNetPortSfpPartNumberThis object provides the part number of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.14 |
cmEthernetNetPortSfpSerialNumberThis object provides the serial number of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.15 |
cmEthernetNetPortSfpDateOfManufactureThis object provides the date of manufacture of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.16 |
cmEthernetNetPortSfpConnectorValueThis object provides the SFP connector value.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.ro SfpConnectorValue (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.17 |
cmEthernetNetPortInitiateDiagThis object allows to initiate Etherjack diagnosis on the
Ethernet Network Port.rw CmEthernetDiagAction .1.3.6.1.4.1.2544.1.12.4.1.7.1.18 |
cmEthernetNetPortDiagnosePair1CondThis object provides diagnosis results for the cable Pair 1
on Ethernet Network Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.7.1.19 |
cmEthernetNetPortDiagnosePair2CondThis object provides diagnosis results for the cable Pair 2
on Ethernet Network Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.7.1.20 |
cmEthernetNetPortDiagnosePair3CondThis object provides diagnosis results for the cable Pair 3
on Ethernet Network Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.7.1.21 |
cmEthernetNetPortDiagnosePair4CondThis object provides diagnosis results for the cable Pair 4
on Ethernet Network Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.7.1.22 |
cmEthernetNetPortDiagnoseAutoNegCondThis object provides auto negotiation results of the diagnosis
test on Ethernet Network Port.ro CmDiagAutoNegCondType .1.3.6.1.4.1.2544.1.12.4.1.7.1.23 |
cmEthernetNetPortDiagnoseLpbkCondThis object provides port loopback results of the diagnosis
test on Ethernet Network Port.ro CmDiagLpbkCondType .1.3.6.1.4.1.2544.1.12.4.1.7.1.24 |
cmEthernetNetPortDiagnoseEfmLpbkCondThis object provides remote EFM loopback results of the diagnosis
test on Ethernet Network Port.ro CmDiagEfmOamLpbkCondType .1.3.6.1.4.1.2544.1.12.4.1.7.1.25 |
cmEthernetNetPortDiagnoseResultThis object provides results of the diagnosis
test in string form on Ethernet Network Port.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.26 |
cmEthernetNetPortDiagnoseTestStatusThis object provides the current status of the diagnosis
test on Ethernet Access Port.ro CmDiagTestStatus .1.3.6.1.4.1.2544.1.12.4.1.7.1.27 |
cmEthernetNetPortDiagnoseTestTimeThis object provides the time when diagnosis test was last executed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.28 |
cmEthernetNetPortLoopbackConfigThis object allows to initiate loopbacks on
on the Ethernet Network Port.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.7.1.29 |
cmEthernetNetPortLoopbackStatusThis object provides status of the current loopback
on the Ethernet Network Port.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.7.1.30 |
cmEthernetNetPortLoopbackTimeThis object allows to specify time for timed-loopbacks on
on the Ethernet Network Port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.31 |
cmEthernetNetPortLoopbackSwapSADAThis object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped.rw CmSwapSADAType .1.3.6.1.4.1.2544.1.12.4.1.7.1.32 |
cmEthernetNetPortOuterVlanLoopbackMaskThis object allows specification of the outer VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loopback. The various bit positions are:
1 Outer VLAN 1 Loopback Enabled
2 Outer VLAN 2 Loopback Enabled
4 Outer VLAN 3 Loopback Enabled
Value of 0 means that no VLANs are enabled.rw INTEGER .1.3.6.1.4.1.2544.1.12.4.1.7.1.33 |
cmEthernetNetPortOuterVlanLoopback1This object allows specification of the outer VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.34 |
cmEthernetNetPortOuterVlanLoopback2This object allows specification of the outer VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.35 |
cmEthernetNetPortOuterVlanLoopback3This object allows specification of the outer VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.36 |
cmEthernetNetPortInnerVlanLoopbackMaskThis object allows specification of the inner VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loopback. The various bit positions are:
1 Inner VLAN 1 Loopback Enabled
2 Inner VLAN 2 Loopback Enabled
4 Inner VLAN 3 Loopback Enabled
Value of 0 means that no VLANs are enabled.rw INTEGER .1.3.6.1.4.1.2544.1.12.4.1.7.1.37 |
cmEthernetNetPortInnerVlanLoopback1This object allows specification of the inner VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.38 |
cmEthernetNetPortInnerVlanLoopback2This object allows specification of the inner VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.39 |
cmEthernetNetPortInnerVlanLoopback3This object allows specification of the inner VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.7.1.40 |
cmEthernetNetPortLinkLossFwdEnabledThis object allows enabling/disabling link loss forwarding
on the Ethernet Network Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.41 |
cmEthernetNetPortLinkLossFwdSignalTypeThis object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetNetPortLinkLossFwdEnabled is enabled.
This object is only valid for FSP150CM Release 3.1.
This object is deprecated henceforth.
Link Loss signalling will be supported using the object
cmEthernetAccPortLinkLossFwdTxActionType.rwdeprecated CmLinkLossFwdSignalType .1.3.6.1.4.1.2544.1.12.4.1.7.1.42 |
cmEthernetNetPortLinkLossFwdTriggerTypesThis object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled.rw CmLinkLossFwdTriggerTypes .1.3.6.1.4.1.2544.1.12.4.1.7.1.43 |
cmEthernetNetPortLinkLossFwdDelayThis object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.44 |
cmEthernetNetPortLinkLossFwdActiveThis object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.45 |
cmEthernetNetPortLinkLossFwdPartnerEnabledThis object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.46 |
cmEthernetNetPortLinkLossFwdLocalLinkIdThis object allows configuration of the Local Link Id on
Ethernet Network port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.47 |
cmEthernetNetPortLinkLossFwdRemoteLinkIdsThis object allows enabling/disabling Remote Link Ids
on Ethernet Network port. By setting the appropriate bit
positions, the Ethernet Network port is able to distinguish
the remote side client ports from the Remote Link Down
PDUs coming from remote end.rw CmRemoteLinkIds .1.3.6.1.4.1.2544.1.12.4.1.7.1.48 |
cmEthernetNetPortOamIdOAM Id. This is unique EFM OAM sublayer port id.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.49 |
cmEthernetNetPortOamAdminDispositionEthernet Network Port's EFM OAM Administrative Disposition.
This object is applicable only for FSP150CM Release 3.1.
This object is deprecated henceforth.
With FSP150CC Release 4.1, this property is managed using
the Control Protocol Disposition tables.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.7.1.50 |
cmEthernetNetPortOamDiscoveryStateEthernet Network Port's OAM discovery state.ro CmOamDiscoveryState .1.3.6.1.4.1.2544.1.12.4.1.7.1.51 |
cmEthernetNetPortOamLocalVarRtrvsEnabledThis object allows specification of whether the Ethernet
Network Port supports sending variable response OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.52 |
cmEthernetNetPortOamLocalLinkEventsEnabledThis object allows specification of whether the Ethernet
Network Port supports interpreting Link Events.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.53 |
cmEthernetNetPortOamLocalOamLoopbacksSupportedThis object allows specification of whether the Ethernet
Network Port is capable of OAM remote loopback mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.54 |
cmEthernetNetPortOamLocalUnidirSupportEnabledThis object allows specification of whether the Ethernet
Network Port is capable of sending OAMPDUs when the receive path
is non-operational.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.55 |
cmEthernetNetPortOamLocalMaxPDUSizeThis object represents the largest OAMPDU, in octets,
supported by the Ethernet Network Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two is used.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.56 |
cmEthernetNetPortOamLocalModeThis object allows to configure the OAM sublayer entity in
either Active or Passive mode.rw CmOamMode .1.3.6.1.4.1.2544.1.12.4.1.7.1.57 |
cmEthernetNetPortOamRemoteMacAddressThis object allows retrieval of the Remote Mac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.58 |
cmEthernetNetPortOamRemoteVarRtrvsEnabledThis object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.59 |
cmEthernetNetPortOamRemoteLinkEventsEnabledThis object allows retrieval of whether the remote OAM
entity supports interpreting Link Events.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.60 |
cmEthernetNetPortOamRemoteOamLoopbacksSupportedThis object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.61 |
cmEthernetNetPortOamRemoteUnidirSupportEnabledThis object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.62 |
cmEthernetNetPortOamRemoteMaxPDUSizeThis object allows retrieval of the remote OAM
entity maximum OAMPDU size.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.63 |
cmEthernetNetPortOamRemoteModeThis object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode.ro CmOamMode .1.3.6.1.4.1.2544.1.12.4.1.7.1.64 |
cmEthernetNetPortRxPauseDispositionThis object allows enabling/disabling receive pause frames on
Ethernet Network port. This object is not applicable
for FSP150CC Release 4.1 products.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.7.1.65 |
cmEthernetNetPortTxPauseEnabledThis object allows enabling/disabling transmit pause frames on
Ethernet Network port.
This object is not applicable for FSP150CC Release 4.1 products.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.66 |
cmEthernetNetPortAfpTypeThis object allows specification of the Acceptable Frame Policy on
Ethernet Network port. Users can specify whether the port supports
only tagged frames, only untagged frames or both tagged and
untagged frames.
This object is not applicable for FSP150CC Release 4.1 products.rw CmAfpType .1.3.6.1.4.1.2544.1.12.4.1.7.1.67 |
cmEthernetNetPortMDIXStatusThis object provides the current MDIX status of the
Ethernet Network port.ro CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.7.1.68 |
cmEthernetNetPortSfpReachThis object provides the SFP Reach in meters.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.69 |
cmEthernetNetPortSfpLaserWaveLengthThis object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetNetPortMediaType is fiber.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.70 |
cmEthernetNetPortSfpMediaTypeThis object provides the SFP Media Type.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.ro SfpMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.71 |
cmEthernetNetPortOamEnabledThis object allows to manage the EFM OAM on Ethernet Network Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.72 |
cmEthernetNetPortOamAdminStateThis object provides the EFM OAM Admin State.ro CmOamAdminState .1.3.6.1.4.1.2544.1.12.4.1.7.1.73 |
cmEthernetNetPortShapingEnabledThis object allows to manage the Network Port Shaping.
When enabled, values in cmEthernetNetPortShapedSpeedLo and
cmEthernetNetPortShapedSpeedHi are applicable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.74 |
cmEthernetNetPortShapedSpeedLoThis object allows to specify the lower 32 bits of
the Network Port Shaped speed. This value is applicable
when cmEthernetNetPortShapingEnabled is enabled.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.75 |
cmEthernetNetPortShapedSpeedHiThis object allows to specify the higher 32 bits of
the Network Port Shaped speed. This value is applicable
when cmEthernetNetPortShapingEnabled is enabled.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.76 |
cmEthernetNetPortQinQEtherTypeThis object allows to specify the Q-in-Q Ether Type
on the Network Port. Setting this value to 0 will disable
the Q-in-Q override on the Network Port.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.77 |
cmEthernetNetPortLinkLossFwdTxActionTypeThis object allows to specify the Network Port's behavior when
link loss forwarding trigger events occur on the Access Port.rw CmLinkLossFwdTxActionType .1.3.6.1.4.1.2544.1.12.4.1.7.1.78 |
cmEthernetNetPortLinkLossFwdRxRLDLinkIdsThis object provides the received Remote Link IDs in
EFM RLD messages on the Network Port.ro CmRemoteLinkIds .1.3.6.1.4.1.2544.1.12.4.1.7.1.79 |
cmEthernetNetPortAutoDiagEnabledThis object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.80 |
cmEthernetNetPortSyncEEnabledThis object allows to specify whether the Ethernet Network Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable ports.
When enabled, on receive side
-port can extract the frequency of its input signal
and pass the recovered clock to the system clock
-port processes the ESMC(Ethernet Synchronization Messaging
Channel) and extracts the QL (when also QL enabled)
-port is eligible to be selected as a system clock reference
When enabled, on transmit side
-port's transmit clock is locked to the system clock
-port generates an ESMC to generate a QL (when also QL enabled)
When disabled, on receive side,
-port does not pass the recovered clock to the system clock
-port does not process the ESMC (if present)
-port is not eligible to be selected as a
system clock reference
When disabled, on transmit side
-port's output frequency may be synchronized to the system clock
-port does not generate an ESMC.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.81 |
cmEthernetNetPortQLModeEnabledThis object allows to specify whether the Ethernet Network Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetNetPortQLModeEnabled is set to true.
When enabled, on receive side
-port shall PEER the SSM (Sync Status Messages) slow protocol PDUs
and take appropriate action
When enabled, on transmit side
-port shall periodically (once a second) transmit QL TLV
information PDUs
When disabled, on receive side,
-port shall terminate and discard any SSM slow protocol PDUs
When disabled, on transmit side
-port shall not transmit any SSM slow protocol PDUs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.82 |
cmEthernetNetPortExpectedQLThis object allows to specify the expected QL when the
Ethernet Network Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetNetPortQLModeEnabled is set to true.
This object allows the user to set a minimum
expected received Quality Level on the port. The valid values
depend upon the SYNC entity's Network Clock Type. A value of
None represents that a minimum Quality Level is not expected.
The default value shall be None.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.83 |
cmEthernetNetPortAssumedQLThis object allows to specify the assumed QL on the
Ethernet Network Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaningful if the Network Clock Type
(see fsp150cm-sync.mib) is option1 and the
port's QL Mode is disabled and the port is being used as
an input reference source. Under these conditions,
the specified QL value is assumed to be the Quality Level of the
non-failed reference.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.84 |
cmEthernetNetPortReceivedQLThis object provides the Received QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable.This object is only applicable for
Synchronous Ethernet capable ports.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.85 |
cmEthernetNetPortTransmitQLThis object provides the Transmitted QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable. This object is only applicable for
Synchronous Ethernet capable ports.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.86 |
cmEthernetNetPortPrioMapModeThis object provides the Priority Mapping Mode used for
classification of frames.ro PriorityMapMode (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.87 |
cmEthernetNetPortDeiEnableThis is a port level control to reset the DEI
(Drop Eligibility Indicator) bit in the S-Tag,
if the downstream equipment supports S-Tag TPID (EtherType) but
cannot handle DEI bit set. In the receive direction,
it uses the S-TAG DEI when enabled, else ignores it.
The following comment is NOT relevant to OSA8.1.1,
since this object is still supported by OSA8.1.1.
The object has been deprecated.
The respective configuration should be managed
by following objects:
cmEthernetNetPortRxDeiAction, cmEthernetNetPortTxDeiAction,
cmEthernetNetPortRxDeiOuterTagType, cmEthernetNetPortTxDeiOuterTagType.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.88 |
cmEthernetNetPortPcpDEEncTypeThis is a port level control that specifies the mode of drop
eligibility encoding in PCP bits of the VLAN tag.rw PcpDEEncType .1.3.6.1.4.1.2544.1.12.4.1.7.1.89 |
cmEthernetNetPortPcpDEPairsActionThis object allows the SNMP user to manage the Priority
Code Point (PCP) Drop Eligibility Pairs. When the
cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d,
the cmNetPortPcpDEPairTable can be used to specify
alternate pairs of priorities to specify drop eligibility/
ineligibility.rw PcpDEPairsAction .1.3.6.1.4.1.2544.1.12.4.1.7.1.90 |
cmEthernetNetPortSSMRemoteMacAddressThis object allows retrieval of the Remote Mac Address, when
the port is peering using SSM.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.91 |
cmEthernetNetPortXgePhyTypeThis object allows to specify the PHY type of 10G Ethernet Port.
10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY
and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps.
This attribute is only applicable for ports configured to work at speed-10G-full.
For other speeds the value of this object must be 'not-applicable' and cannot
be changed.rw XgePhyType .1.3.6.1.4.1.2544.1.12.4.1.7.1.92 |
cmEthernetNetPortLoopbackSourceMacControlEnabledThis object allows to Enable/Disable the Net Port Source MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.93 |
cmEthernetNetPortLoopbackDestMacControlEnabledThis object allows to Enable/Disable the Net Port Destination MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.94 |
cmEthernetNetPortLoopbackSourceMacAddressThis object allows to set Net Port Source MAC Address for frame
matching when Net Port Source MAC Control is enabled.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.95 |
cmEthernetNetPortLoopbackDestMacAddressThis object allows to set Net Port Destination MAC Address for frame
matching when Net Port Destination MAC Control is enabled.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.96 |
cmEthernetNetPortLoopbackBlockingEnabledThis object allows frame blocking when loopback is active.
- True: Blocks frames in the non-loopback direction
that match the PORT or VLAN received in the
non-loopback direction. Discards frames
in the loopback direction that match
the PORT or VLAN, but do not match
the MAC address criteria,
- False: No blocking of frames.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.97 |
cmEthernetNetPortRxDeiActionThis object allows to specify
the Receive DEI Action.rw RxDeiAction .1.3.6.1.4.1.2544.1.12.4.1.7.1.98 |
cmEthernetNetPortTxDeiActionThis object allows to specify
the Transmit DEI Action.rw TxDeiAction .1.3.6.1.4.1.2544.1.12.4.1.7.1.99 |
cmEthernetNetPortRxDeiOuterTagTypeThis object allows to specify
the Receive DEI Outer Tag Type.rw DeiOuterTagType .1.3.6.1.4.1.2544.1.12.4.1.7.1.100 |
cmEthernetNetPortTxDeiOuterTagTypeThis object allows to specify
the Transmit DEI Outer Tag Type.rw DeiOuterTagType .1.3.6.1.4.1.2544.1.12.4.1.7.1.101 |
cmEthernetNetPortLaserWDMChannelChannel number of WDM tunable XFP setting.rw SfpChannelIdentifier .1.3.6.1.4.1.2544.1.12.4.1.7.1.102 |
cmEthernetNetPortLaserIsTunableChannel number of WDM tunable XFP setting.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.103 |
cmEthernetNetPortLaserFrequencyChannel number of WDM tunable XFP setting.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.104 |
cmEthernetNetPortMediaTypeAutoSelectedThis object provides the auto selected Ethernet Media of the
Ethernet Network Port.ro EthernetMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.105 |
cmEthernetNetPortLowLatencyQueuingEnabledThis object allows to Enable/Disable the Low Latency Queuing on
the Ethernet Network Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.106 |
cmEthernetNetPortDiagnosticMacAddressThis object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.7.1.107 |
cmEthernetNetPortIngressCOSPriorityIndicates the VLAN tag to use for PCP Priority to COS mapping
when the port Priority Map Mode is 802.1p. Supported values are
inner-vlantag and outer-vlantag. This attribute is only applicable
on products when Flowpoint Model is supported.
inner-vlantag: The inner VLAN tag PCP Priority of a frame is
used for ingress COS mapping. A frame with no inner VLAN tag
(untagged or single-tagged) will have a COS equal to the default
COS of the port.
outer-vlantag: The outer VLAN tag PCP Priority of a frame is used
for ingress COS mapping. A frame with no outer VLAN tag (untagged)
will have a COS equal to the default COS of the port.
This attribute has been deprecated and is not supported. Now,
the Priority Map Mode indicates whether it is inner or outer.
Use priomap-8021p(4) for outer and priomap-8021p-inner(5)
for inner.rwdeprecated VlanTagType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.7.1.108 |
cmEthernetNetPortDefaultCOSThe COS assigned to a frame that does not have a valid COS identifier
for the Priority Map Mode of the port. This attribute is only applicable
on products when Flowpoint Model is supported.
This value is assigned to a frame received on a port when:
- the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag;
and the frame is untagged
- the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag;
and the frame has a single VLAN tag
- the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag;
and the frame is untagged
- the cmEthernetNetPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype
- the cmEthernetNetPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype.
This attribute has been deprecated and is not supported. The
Default COS is determined from the flowpoint's associated
Priority Mapping Profle.rwdeprecated Integer32 .1.3.6.1.4.1.2544.1.12.4.1.7.1.109 |
cmEthernetNetPortTrafficModelThe Traffic Management connection model available for the port.
- accessFlow: NID Traffic Connection model.
- flowpoint: Multipoint and Aggregation Traffic Connection model.rw EthernetPortTrafficModel .1.3.6.1.4.1.2544.1.12.4.1.7.1.110 |
cmEthernetNetPortCpdTableA list of entries corresponding to Ethernet Network Port
Control Protocol Disposition.
This table is only
applicable for FSP150CM Hub Shelf Release 3.x. SEQUENCE OF CmEthernetNetPortCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.8 |
cmEthernetNetPortCpdEntryA conceptual row in the cmEthernetNetPortCpdTable.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Network Port. CmEthernetNetPortCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.8.1 |
cmEthernetNetPortCpdIndexAn arbitrary integer index value used to uniquely identify
this CPD Service Entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.8.1.1 |
cmEthernetNetPortCpdFilterTypeThis enables specification of type of CPD Filter.ro CmControlProtocolFilterType .1.3.6.1.4.1.2544.1.12.4.1.8.1.2 |
cmEthernetNetPortCpdFilterDescrThis provides description of CPD Filter.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.8.1.3 |
cmEthernetNetPortCpdDispTypeThis enables specification of disposion type of CPD Filter.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.8.1.4 |
cmEthernetNetPortCpdMacAddressMatchThis enables provides the Filter MAC Address to match.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.8.1.5 |
cmEthernetNetPortCpdMacAddressMaskThis enables provides the Filter MAC Address Mask to match.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.8.1.6 |
cmEthernetNetPortCpdEthertypeThis enables provides the Filter Ethertype to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.8.1.7 |
cmEthernetNetPortCpdEthertypeMaskThis enables provides the Filter Ethertype Mask to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.8.1.8 |
cmEthernetNetPortCpdSubtypeThis enables provides the Filter Subtype to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.8.1.9 |
cmEthernetNetPortCpdSubtypeMaskThis enables provides the Filter Subtype Mask to match.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.8.1.10 |
cmEthernetMgmtPortTableA list of entries corresponding to Ethernet Management Port
Facilities for configuration purposes. SEQUENCE OF CmEthernetMgmtPortEntry .1.3.6.1.4.1.2544.1.12.4.1.9 |
cmEthernetMgmtPortEntryA conceptual row in the cmEthernetMgmtPortTable. CmEthernetMgmtPortEntry .1.3.6.1.4.1.2544.1.12.4.1.9.1 |
cmEthernetMgmtPortIndexAn integer index value used to uniquely identify
this Ethernet Management Port within a card.
Note that each Ethernet Management Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, cmEthernetMgmtPortIndex.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.9.1.1 |
cmEthernetMgmtPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.9.1.2 |
cmEthernetMgmtPortAdminStateThis object represents the Administrative State of the Ethernet
Management Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.9.1.3 |
cmEthernetMgmtPortOperationalStateThis object represents the Operational State of the Ethernet
Management Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.9.1.4 |
cmEthernetMgmtPortSecondaryStateThis object represents the Secondary State of the Ethernet
Management Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.9.1.5 |
cmEthernetMgmtPortMTUThis object provides the MTU on the Ethernet Management Port.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.9.1.6 |
cmEthernetMgmtPortConfigSpeedThis object allows to configure the speed of the
Ethernet Management Port.rw EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.9.1.7 |
cmEthernetMgmtPortNegotiatedSpeedThis object provides the negotiated speed of the
Ethernet Management Port.ro EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.9.1.8 |
cmEthernetMgmtPortMDIXTypeThis object allows management of MDIX property on
Ethernet Management Port.rw CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.9.1.9 |
cmEthernetMgmtPortMDIXStatusThis object provides the current MDIX status of the
Ethernet Management port.ro CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.9.1.10 |
cmEthernetMgmtPortMediaTypeThis object represents the type of Ethernet Media on the
Ethernet Management Port.ro EthernetMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.9.1.11 |
cmPrioMapTableA list of entries corresponding to Ethernet Priority Mappings
in multi Class of Service (COS) mode. This table is applicable
only when the Access Port is in connection-oriented evpl mode. SEQUENCE OF CmPrioMapEntry .1.3.6.1.4.1.2544.1.12.4.1.10 |
cmPrioMapEntryA conceptual row in the cmPrioMapTable. CmPrioMapEntry .1.3.6.1.4.1.2544.1.12.4.1.10.1 |
cmPrioMapIndexThe integer index value corresponding to a priority value
based on the cmEthernetAccPortPrioMapMode.
In case of TOS and 8021P, valid indices are 1 to 8,
in case of DSCP, valid indices are 1 to 64.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.10.1.1 |
cmPrioMapInPriorityThe integer index value corresponding to a priority value
based on the cmEthernetAccPortPrioMapMode.
In case of TOS and 8021P, valid indices are 0 to 7,
in case of DSCP, valid indices are 0 to 63.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.10.1.2 |
cmPrioMapXTagControlThis allows specification of whether the priority of
incoming X-TAG should be swapped with cmPrioMapXTagPriority.rw PrioMapControlType .1.3.6.1.4.1.2544.1.12.4.1.10.1.3 |
cmPrioMapXTagPriorityThis allows specification of the VLAN priority that
will replace the incoming X-TAG's priority. This is
applicable with cmPrioMapXTagControl as 'swap'.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.10.1.4 |
cmPrioMapCOSThis allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.10.1.5 |
cmPrioMapOuterTagPriorityThis allows specification of the VLAN priority that
will replace the outgoing (A2N direction) outer-tag's priority.
Note that, each flow participates or not in outer-tag
priority mapping, using the object 'cmFlowOuterTagPrioEnabled'.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.10.1.6 |
cmPrioMapInnerTagPriorityThis allows specification of the VLAN priority that
will replace the outgoing (A2N direction) inner-tag's (i.e. second tag)
priority. Note that, each flow participates or not in inner-tag
priority mapping, using the object 'cmFlowInnerTagPrioEnabled'.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.10.1.7 |
cmQosFlowPolicerTableA list of entries corresponding to Ethernet Quality of Service
Policer for configuration purposes. SEQUENCE OF CmQosFlowPolicerEntry .1.3.6.1.4.1.2544.1.12.4.1.11 |
cmQosFlowPolicerEntryA conceptual row in the cmQosFlowPolicerTable.
These entries represent a Quality of Service Policer. CmQosFlowPolicerEntry .1.3.6.1.4.1.2544.1.12.4.1.11.1 |
cmQosFlowPolicerTypeIndexThe unique index value corresponding to a Quality of Service
Policer's direction.
Values 1 and 2 are applicable to the Access Flow Policer
- value of 1 stands for A2N direction,
- value of 2 stands for N2A direction.
Values 3 and 4 are applicable to Pass-thru Flow Policer
(new in 5.6CC release):
- value of 3 stands for N1toN2 direction
- value of 4 stands for N2toN1 directionrw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.11.1.1 |
cmQosFlowPolicerIndexThe Policer Index that represents the COS level. This
is applicable in case of a Multi COS flow. Index 1
represents COS 0; Index 2 represents COS 1 and so on.
In release 5.6CC the range is extended to 1..16 to support duplicate
N2A policers on a Flow. The duplicate policers are created under a Flow
if network interface of the Flow is ERP Group or Split Horizon Group.
In case of multi-cos Flow indices 1..8 represent policers of COS 0..7
going from Network 1 port; indices 9..16 represent policers for COS 0..7
going from Network 2 port.
In case of single-cos Flow index 1 represents policer going from Network 1
port; index 9 represents policer going from Network 2 port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.11.1.2 |
cmQosFlowPolicerDirectionThis object is allows specification of Policer direction as
'a2n' or 'n2a'.rw TrafficDirection (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.11.1.3 |
cmQosFlowPolicerAdminStateThis object represents the Administrative State of
the QOS Flow Policer.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.11.1.4 |
cmQosFlowPolicerOperationalStateThis object represents the Operational State of the QOS Flow Policer.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.11.1.5 |
cmQosFlowPolicerSecondaryStateThis object represents the Secondary State of the QOS Flow Policer.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.11.1.6 |
cmQosFlowPolicerCIRLoThis object allows specification of the Commited Information
Rate(CIR) on Policer. This represents the lower 32 bits of the
CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.11.1.7 |
cmQosFlowPolicerCIRHiThis object allows specification of the Commited Information
Rate(CIR) on Policer. This represents the upper 32 bits of the
CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.11.1.8 |
cmQosFlowPolicerEIRLoThis object allows specification of the Excess Information
Rate(EIR) on the Policer. This represents the lower 32 bits
of the EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.11.1.9 |
cmQosFlowPolicerEIRHiThis object allows specification of the Excess Information
Rate(EIR) on the Policer. This represents the upper 32 bits
of the EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.11.1.10 |
cmQosFlowPolicerCBSThis object allows specification of the Commited Burst Size
(CBS) on Policer.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.11.1.11 |
cmQosFlowPolicerEBSThis object allows specification of the Excess Burst Size
(EBS) on the Policer.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.11.1.12 |
cmQosFlowPolicerAlgorithmThis object allows specification of Policer algorithm as
'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate
Triple Color Marking).ro PolicerAlgorithmType .1.3.6.1.4.1.2544.1.12.4.1.11.1.13 |
cmQosFlowPolicerColorModeThis object allows specification of Policer Color Mode as
'color-aware' or 'color-blind'.rw PolicerColorMode .1.3.6.1.4.1.2544.1.12.4.1.11.1.14 |
cmQosFlowPolicerColorMarkingFlagThis object allows specification of Policer Color Marking Flag.
The policer will set/clear the DEI (Drop Eligibility Indication)
bit of the frame on an S-TAG if this flag is enabled.
This object is not supported - setting any value will not have effect
on the System.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.11.1.15 |
cmQosFlowPolicerCouplingFlagThis object allows specification of Policer Coupling Flag.
When coupling is enabled, tokens that would normally be
added to the C-bucket are passed to the E-bucket only once the CIR
bucket has reached its CBS level. Therefore under this condition
the E-bucket is being filled at the rate of CIR + EIR.
Normally the long term average of frames declared yellow is
bounded by the EIR. Coupling is a function to allow the
long term average of frames declared yellow to be bounded by
CIR + EIR. This allows a higher volume of yellow frames
to be delivered/received if the arrival of green marked frames
is low. Tokens from the E-bucket do NOT get passed to the
C-bucket once the EBS level has been reached.
Enabling coupling in combination with a provisioned EIR of 0
allows for a single rate three color marking (srTCM) algorithm
to be established. In this situation the E-bucket is filled at the
CIR rate in the case the C-bucket is filled to its CBS level.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.11.1.16 |
cmQosFlowPolicerAssociatedShaperThis object allows specification of the QOS Shaper
associated with this Policer. Multiple Policers can map
to single Shaper. The corresponding row with the
specified QOS value must exist in
cmQosShaperTable when this value is specified.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.11.1.17 |
cmQosFlowPolicerStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.11.1.18 |
cmQosFlowPolicerRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmQosFlowPolicerRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmQosFlowPolicerRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmQosFlowPolicerRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.11.1.19 |
cmAccPortQosShaperTableA list of entries corresponding to Ethernet Access Port
Quality of Service Shaper for configuration purposes.
These shapers can be managed when the Access Port is
in evpl mode and are relevant for traffic in the
network to access direction. SEQUENCE OF CmAccPortQosShaperEntry .1.3.6.1.4.1.2544.1.12.4.1.12 |
cmAccPortQosShaperEntryA conceptual row in the cmAccPortQosShaperTable.
These entries represent a Quality of Service Shaper. CmAccPortQosShaperEntry .1.3.6.1.4.1.2544.1.12.4.1.12.1 |
cmAccPortQosShaperIndexThe unique integer index value corresponding to a
Quality of Service Shaper.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.1 |
cmAccPortQosShaperDirectionThe direction of the Quality of Service Shaper.ro TrafficDirection (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.12.1.2 |
cmAccPortQosShaperAdminStateThis object represents the Administrative State of
the QOS Shaper.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.12.1.3 |
cmAccPortQosShaperOperationalStateThis object represents the Operational State of the QOS Shaper.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.12.1.4 |
cmAccPortQosShaperSecondaryStateThis object represents the Secondary State of the QOS Shaper.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.12.1.5 |
cmAccPortQosShaperCIRLoThis object represents the Commited Information
Rate(CIR) (Lower 32 bits)of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.6 |
cmAccPortQosShaperCIRHiThis object represents the Commited Information
Rate(CIR) (Higher 32 bits) of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.7 |
cmAccPortQosShaperEIRLoThis object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.8 |
cmAccPortQosShaperEIRHiThis object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.9 |
cmAccPortQosShaperCBSThis object represents the Commited Burst Size (CBS) of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.10 |
cmAccPortQosShaperEBSThis object represents the Excess Burst Size (EBS) of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.11 |
cmAccPortQosShaperBufferSizeThis object represents the Buffer Size of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.12 |
cmAccPortQosShaperCOSThis object provides the COS (Class of Service)
value for the QOS Shaper.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.13 |
cmAccPortQosShaperSoamCIRLoThis object represents the Soam Commited Information
Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.14 |
cmAccPortQosShaperSoamCIRHiThis object represents the Soam Commited Information
Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.15 |
cmAccPortQosShaperSoamEIRLoThis object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.16 |
cmAccPortQosShaperSoamEIRHiThis object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.17 |
cmAccPortQosShaperWredGreenMinQueueThresholdThis object represents the Wred green packet min queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.18 |
cmAccPortQosShaperWredGreenMaxQueueThresholdThis object represents the Wred green packet max queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.19 |
cmAccPortQosShaperWredGreenDropProbabilityThis object represents the Wred green packet drop probability.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.20 |
cmAccPortQosShaperWredYellowMinQueueThresholdThis object represents the Wred yellow packet min queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.21 |
cmAccPortQosShaperWredYellowMaxQueueThresholdThis object represents the Wred yellow packet max queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.22 |
cmAccPortQosShaperWredYellowDropProbabilityThis object represents the Wred yellow packet drop probability.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.12.1.23 |
cmEthernetAccPortCpdV2TableA list of entries corresponding to Ethernet Access Port
Control Protocol Disposition (CPD) V2. This support of
CPD is provided on the GE206/GE201 device. SEQUENCE OF CmEthernetAccPortCpdV2Entry .1.3.6.1.4.1.2544.1.12.4.1.13 |
cmEthernetAccPortCpdV2EntryA conceptual row in the cmEthernetAccPortCpdV2Table.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Access Port. CmEthernetAccPortCpdV2Entry .1.3.6.1.4.1.2544.1.12.4.1.13.1 |
cmEthernetAccPortCpdV2IndexUnique Index value to access the CPD row.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.13.1.1 |
cmEthernetAccPortCpdV2CiscoGroupDispTypeDeprecated - each Cisco protocol has its own disposition.
Control Protocol Disposition for Cisco Group. This includes
ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge,
L2PT. Note that a specific protocol filter overrides the
group setting.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.2 |
cmEthernetAccPortCpdV2IslDispTypeControl Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.3 |
cmEthernetAccPortCpdV2PagpDispTypeControl Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.4 |
cmEthernetAccPortCpdV2UdldDispTypeControl Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.5 |
cmEthernetAccPortCpdV2CdpDispTypeControl Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.6 |
cmEthernetAccPortCpdV2VtpDispTypeControl Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.7 |
cmEthernetAccPortCpdV2DtpDispTypeControl Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.8 |
cmEthernetAccPortCpdV2PvstpPlusDispTypeControl Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.9 |
cmEthernetAccPortCpdV2UplinkFastDispTypeControl Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.10 |
cmEthernetAccPortCpdV2VlanBridgeDispTypeControl Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.11 |
cmEthernetAccPortCpdV2L2PTDispTypeControl Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.12 |
cmEthernetAccPortCpdV2BridgeGroupDispTypeDeprecated - individual dispositions available for each MAC.
Bridge Group Control Protocol Disposition Type. This
includes BPDU, PAUSE (IEEE 802.3x Flow Control),
LACP (Link Aggregation), LACP Marker (Marker),
EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication,
besides reserved MAC addresses from
01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.13 |
cmEthernetAccPortCpdV2BPDUDispTypeControl Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.14 |
cmEthernetAccPortCpdV2PauseDispTypeControl Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.15 |
cmEthernetAccPortCpdV2LACPDispTypeControl Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.16 |
cmEthernetAccPortCpdV2LACPMarkerDispTypeControl Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.17 |
cmEthernetAccPortCpdV2EfmOamDispTypeControl Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.18 |
cmEthernetAccPortCpdV2SSMDispTypeControl Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.19 |
cmEthernetAccPortCpdV2PortAuthenDispTypeControl Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.20 |
cmEthernetAccPortCpdV2BridgeReservedDispTypeDeprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.21 |
cmEthernetAccPortCpdV2LANBridgesDispTypeControl Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.22 |
cmEthernetAccPortCpdV2GARPGroupDispTypeDeprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.23 |
cmEthernetAccPortCpdV2GMRPDispTypeControl Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.24 |
cmEthernetAccPortCpdV2GVRPDispTypeControl Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:21).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.25 |
cmEthernetAccPortCpdV2GARPDispTypeGroup Disposition type which includes GARP Reserved
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.26 |
cmEthernetAccPortCpdV2LLDPDispTypeDeprecated - each LLDP MAC protocol has its own disposition.
LLDP (Link Layer Discovery Protocol) Disposition type.
MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or
01:80:C2:00:00:00.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.27 |
cmEthernetAccPortCpdV2ELMIDispTypeELMI (Ethernet Local Management Interface) Disposition type.
MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.28 |
cmEthernetAccPortCpdV2L2PTTunnelMacConfigurable Layer 2 Protocol Tunneling MAC Address.
For protocols STP, CDP and VTP, with control protocol disposition as
pass-thru-l2pt, this configured MAC address replaces the DA, upon
encapsulation. For decapsulation, protocol signature and this
configured MAC address are matched and the MAC address is replaced
with the protocol's inferred MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.13.1.29 |
cmEthernetAccPortCpdV2Mac00DispTypeMAC Address 01:80:C2:00:00:00 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.30 |
cmEthernetAccPortCpdV2Mac01DispTypeMAC Address 01:80:C2:00:00:01 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.31 |
cmEthernetAccPortCpdV2Mac02DispTypeMAC Address 01:80:C2:00:00:02 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.32 |
cmEthernetAccPortCpdV2Mac03DispTypeMAC Address 01:80:C2:00:00:03 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.33 |
cmEthernetAccPortCpdV2Mac04DispTypeMAC Address 01:80:C2:00:00:04 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.34 |
cmEthernetAccPortCpdV2Mac05DispTypeMAC Address 01:80:C2:00:00:05 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.35 |
cmEthernetAccPortCpdV2Mac06DispTypeMAC Address 01:80:C2:00:00:06 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.36 |
cmEthernetAccPortCpdV2Mac07DispTypeMAC Address 01:80:C2:00:00:07 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.37 |
cmEthernetAccPortCpdV2Mac08DispTypeMAC Address 01:80:C2:00:00:08 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.38 |
cmEthernetAccPortCpdV2Mac09DispTypeMAC Address 01:80:C2:00:00:09 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.39 |
cmEthernetAccPortCpdV2Mac0ADispTypeMAC Address 01:80:C2:00:00:0A Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.40 |
cmEthernetAccPortCpdV2Mac0BDispTypeMAC Address 01:80:C2:00:00:0B Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.41 |
cmEthernetAccPortCpdV2Mac0CDispTypeMAC Address 01:80:C2:00:00:0C Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.42 |
cmEthernetAccPortCpdV2Mac0DDispTypeMAC Address 01:80:C2:00:00:0D Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.43 |
cmEthernetAccPortCpdV2Mac0EDispTypeMAC Address 01:80:C2:00:00:0E Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.44 |
cmEthernetAccPortCpdV2Mac0FDispTypeMAC Address 01:80:C2:00:00:0F Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.45 |
cmEthernetAccPortCpdV2NearestLLDPDispTypeLLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.46 |
cmEthernetAccPortCpdV2NonTpmrLLDPDispTypeLLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.47 |
cmEthernetAccPortCpdV2CustomerLLDPDispTypeLLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.48 |
cmEthernetAccPortCpdV2PtpUntaggedDispTypePTP untagged frame Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.49 |
cmEthernetAccPortCpdV2PtpTaggedDispTypePTP tagged frame Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.13.1.50 |
cmFlowCpdV2TableA list of entries corresponding to Ethernet Flow
Control Protocol Disposition V2.
This table is supported for the GE206/GE201 devices. SEQUENCE OF CmFlowCpdV2Entry .1.3.6.1.4.1.2544.1.12.4.1.14 |
cmFlowCpdV2EntryA conceptual row in the cmFlowCpdV2Table.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Flow. CmFlowCpdV2Entry .1.3.6.1.4.1.2544.1.12.4.1.14.1 |
cmFlowCpdV2IndexUnique Index value to access the CPD row.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.14.1.1 |
cmFlowCpdV2CiscoGroupDispTypeDeprecated - each Cisco protocol has its own disposition.
Control Protocol Disposition for Cisco Group. This includes
ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge,
L2PT. Note that a specific protocol filter overrides the
group setting.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.2 |
cmFlowCpdV2IslDispTypeControl Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.3 |
cmFlowCpdV2PagpDispTypeControl Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.4 |
cmFlowCpdV2UdldDispTypeControl Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.5 |
cmFlowCpdV2CdpDispTypeControl Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.6 |
cmFlowCpdV2VtpDispTypeControl Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.7 |
cmFlowCpdV2DtpDispTypeControl Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.8 |
cmFlowCpdV2PvstpPlusDispTypeControl Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.9 |
cmFlowCpdV2UplinkFastDispTypeControl Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.10 |
cmFlowCpdV2VlanBridgeDispTypeControl Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.11 |
cmFlowCpdV2L2PTDispTypeControl Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.12 |
cmFlowCpdV2BridgeGroupDispTypeDeprecated - individual dispositions available for each MAC.
Bridge Group Control Protocol Disposition Type. This
includes BPDU, PAUSE (IEEE 802.3x Flow Control),
LACP (Link Aggregation), LACP Marker (Marker),
EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication,
besides reserved MAC addresses from
01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.13 |
cmFlowCpdV2BPDUDispTypeControl Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.14 |
cmFlowCpdV2PauseDispTypeControl Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.15 |
cmFlowCpdV2LACPDispTypeControl Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.16 |
cmFlowCpdV2LACPMarkerDispTypeControl Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.17 |
cmFlowCpdV2EfmOamDispTypeControl Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.18 |
cmFlowCpdV2SSMDispTypeControl Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.19 |
cmFlowCpdV2PortAuthenDispTypeControl Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.20 |
cmFlowCpdV2BridgeReservedDispTypeDeprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.21 |
cmFlowCpdV2LANBridgesDispTypeControl Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.22 |
cmFlowCpdV2GARPGroupDispTypeDeprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.23 |
cmFlowCpdV2GMRPDispTypeControl Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.24 |
cmFlowCpdV2GVRPDispTypeControl Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:21).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.25 |
cmFlowCpdV2GARPDispTypeGroup Disposition type which includes GARP Reserved
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.26 |
cmFlowCpdV2ActiveControlProtocolsList of Active Control Protocol Dispositions. Note that
if the Port Level Disposition control is set to PEER or
DISCARD, the flow level disposition is no longer active.
This object provides information on all the active
dispositions.ro CmActiveControlProtocolsType .1.3.6.1.4.1.2544.1.12.4.1.14.1.27 |
cmFlowCpdV2LLDPDispTypeDeprecated - each LLDP MAC protocol has its own disposition.
LLDP (Link Layer Discovery Protocol) Disposition type.
MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or
01:80:C2:00:00:00.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.28 |
cmFlowCpdV2ELMIDispTypeELMI (Ethernet Local Management Interface) Disposition type.
MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.29 |
cmFlowCpdV2Mac00DispTypeMAC Address 01:80:C2:00:00:00 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.30 |
cmFlowCpdV2Mac01DispTypeMAC Address 01:80:C2:00:00:01 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.31 |
cmFlowCpdV2Mac02DispTypeMAC Address 01:80:C2:00:00:02 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.32 |
cmFlowCpdV2Mac03DispTypeMAC Address 01:80:C2:00:00:03 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.33 |
cmFlowCpdV2Mac04DispTypeMAC Address 01:80:C2:00:00:04 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.34 |
cmFlowCpdV2Mac05DispTypeMAC Address 01:80:C2:00:00:05 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.35 |
cmFlowCpdV2Mac06DispTypeMAC Address 01:80:C2:00:00:06 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.36 |
cmFlowCpdV2Mac07DispTypeMAC Address 01:80:C2:00:00:07 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.37 |
cmFlowCpdV2Mac08DispTypeMAC Address 01:80:C2:00:00:08 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.38 |
cmFlowCpdV2Mac09DispTypeMAC Address 01:80:C2:00:00:09 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.39 |
cmFlowCpdV2Mac0ADispTypeMAC Address 01:80:C2:00:00:0A Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.40 |
cmFlowCpdV2Mac0BDispTypeMAC Address 01:80:C2:00:00:0B Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.41 |
cmFlowCpdV2Mac0CDispTypeMAC Address 01:80:C2:00:00:0C Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.42 |
cmFlowCpdV2Mac0DDispTypeMAC Address 01:80:C2:00:00:0D Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.43 |
cmFlowCpdV2Mac0EDispTypeMAC Address 01:80:C2:00:00:0E Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.44 |
cmFlowCpdV2Mac0FDispTypeMAC Address 01:80:C2:00:00:0F Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.45 |
cmFlowCpdV2NearestLLDPDispTypeLLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.46 |
cmFlowCpdV2NonTpmrLLDPDispTypeLLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.47 |
cmFlowCpdV2CustomerLLDPDispTypeLLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.14.1.48 |
cmEthernetNetPortCpdV2TableA list of entries corresponding to Ethernet Network Port
Control Protocol Disposition V2.
This table is supported for the GE206/GE201 devices. SEQUENCE OF CmEthernetNetPortCpdV2Entry .1.3.6.1.4.1.2544.1.12.4.1.15 |
cmEthernetNetPortCpdV2EntryA conceptual row in the cmEthernetNetPortCpdV2Table.
These entries represent a Control Protocol Disposition
filtering criteria on the Ethernet Network Port. CmEthernetNetPortCpdV2Entry .1.3.6.1.4.1.2544.1.12.4.1.15.1 |
cmEthernetNetPortCpdV2IndexUnique Index value to access the CPD row.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.15.1.1 |
cmEthernetNetPortCpdV2CiscoGroupDispTypeDeprecated - each Cisco protocol has its own disposition.
Control Protocol Disposition for Cisco Group. This includes
ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge,
L2PT. Note that a specific protocol filter overrides the
group setting.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.2 |
cmEthernetNetPortCpdV2IslDispTypeControl Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.3 |
cmEthernetNetPortCpdV2PagpDispTypeControl Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.4 |
cmEthernetNetPortCpdV2UdldDispTypeControl Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.5 |
cmEthernetNetPortCpdV2CdpDispTypeControl Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.6 |
cmEthernetNetPortCpdV2VtpDispTypeControl Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.7 |
cmEthernetNetPortCpdV2DtpDispTypeControl Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.8 |
cmEthernetNetPortCpdV2PvstpPlusDispTypeControl Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.9 |
cmEthernetNetPortCpdV2UplinkFastDispTypeControl Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.10 |
cmEthernetNetPortCpdV2VlanBridgeDispTypeControl Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.11 |
cmEthernetNetPortCpdV2L2PTDispTypeControl Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.12 |
cmEthernetNetPortCpdV2BridgeGroupDispTypeDeprecated - individual dispositions available for each MAC.
Bridge Group Control Protocol Disposition Type. This
includes BPDU, PAUSE (IEEE 802.3x Flow Control),
LACP (Link Aggregation), LACP Marker (Marker),
EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication,
besides reserved MAC addresses from
01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.13 |
cmEthernetNetPortCpdV2BPDUDispTypeControl Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.14 |
cmEthernetNetPortCpdV2PauseDispTypeControl Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.15 |
cmEthernetNetPortCpdV2LACPDispTypeControl Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.16 |
cmEthernetNetPortCpdV2LACPMarkerDispTypeControl Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.17 |
cmEthernetNetPortCpdV2EfmOamDispTypeControl Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.18 |
cmEthernetNetPortCpdV2SSMDispTypeControl Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.19 |
cmEthernetNetPortCpdV2PortAuthenDispTypeControl Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.20 |
cmEthernetNetPortCpdV2BridgeReservedDispTypeDeprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.21 |
cmEthernetNetPortCpdV2LANBridgesDispTypeControl Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.22 |
cmEthernetNetPortCpdV2GARPGroupDispTypeDeprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.23 |
cmEthernetNetPortCpdV2GMRPDispTypeControl Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.24 |
cmEthernetNetPortCpdV2GVRPDispTypeControl Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:21).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.25 |
cmEthernetNetPortCpdV2GARPDispTypeGroup Disposition type which includes GARP Reserved
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.26 |
cmEthernetNetPortCpdV2LLDPDispTypeDeprecated - each LLDP MAC protocol has its own disposition.
LLDP (Link Layer Discovery Protocol) Disposition type.
MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or
01:80:C2:00:00:00.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.27 |
cmEthernetNetPortCpdV2ELMIDispTypeELMI (Ethernet Local Management Interface) Disposition type.
MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.28 |
cmEthernetNetPortCpdV2L2PTTunnelMacConfigurable Layer 2 Protocol Tunneling MAC Address.
For protocols STP, CDP and VTP, with control protocol disposition as
pass-thru-l2pt, this configured MAC address replaces the DA, upon
encapsulation. For decapsulation, protocol signature and this
configured MAC address are matched and the MAC address is replaced
with the protocol's inferred MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.15.1.29 |
cmEthernetNetPortCpdV2Mac00DispTypeMAC Address 01:80:C2:00:00:00 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.30 |
cmEthernetNetPortCpdV2Mac01DispTypeMAC Address 01:80:C2:00:00:01 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.31 |
cmEthernetNetPortCpdV2Mac02DispTypeMAC Address 01:80:C2:00:00:02 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.32 |
cmEthernetNetPortCpdV2Mac03DispTypeMAC Address 01:80:C2:00:00:03 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.33 |
cmEthernetNetPortCpdV2Mac04DispTypeMAC Address 01:80:C2:00:00:04 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.34 |
cmEthernetNetPortCpdV2Mac05DispTypeMAC Address 01:80:C2:00:00:05 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.35 |
cmEthernetNetPortCpdV2Mac06DispTypeMAC Address 01:80:C2:00:00:06 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.36 |
cmEthernetNetPortCpdV2Mac07DispTypeMAC Address 01:80:C2:00:00:07 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.37 |
cmEthernetNetPortCpdV2Mac08DispTypeMAC Address 01:80:C2:00:00:08 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.38 |
cmEthernetNetPortCpdV2Mac09DispTypeMAC Address 01:80:C2:00:00:09 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.39 |
cmEthernetNetPortCpdV2Mac0ADispTypeMAC Address 01:80:C2:00:00:0A Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.40 |
cmEthernetNetPortCpdV2Mac0BDispTypeMAC Address 01:80:C2:00:00:0B Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.41 |
cmEthernetNetPortCpdV2Mac0CDispTypeMAC Address 01:80:C2:00:00:0C Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.42 |
cmEthernetNetPortCpdV2Mac0DDispTypeMAC Address 01:80:C2:00:00:0D Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.43 |
cmEthernetNetPortCpdV2Mac0EDispTypeMAC Address 01:80:C2:00:00:0E Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.44 |
cmEthernetNetPortCpdV2Mac0FDispTypeMAC Address 01:80:C2:00:00:0F Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.45 |
cmEthernetNetPortCpdV2NearestLLDPDispTypeLLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.46 |
cmEthernetNetPortCpdV2NonTpmrLLDPDispTypeLLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.47 |
cmEthernetNetPortCpdV2CustomerLLDPDispTypeLLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.48 |
cmEthernetNetPortCpdV2PtpUntaggedDispTypePTP non forwarding untagged frame Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.49 |
cmEthernetNetPortCpdV2PtpTaggedDispTypePTP tagged frame Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.15.1.50 |
bitsPortTableA list of entries corresponding to BITS Port
Facilities for configuration purposes. SEQUENCE OF BitsPortEntry .1.3.6.1.4.1.2544.1.12.4.1.16 |
bitsPortEntryA conceptual row in the bitsPortTable. BitsPortEntry .1.3.6.1.4.1.2544.1.12.4.1.16.1 |
bitsPortTypeIndexAn integer index value used to uniquely identify
this BITS Port within the card. Value 1 stands for
BITS-IN, 2 for BITS-OUT.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.16.1.1 |
bitsPortIndexAn integer index value used to uniquely identify
this BITS Port within the card.
Note that each BITs Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, bitsPortIndex.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.16.1.2 |
bitsPortIfIndexThis object has the same value as ifIndex for
Bits Port. An integer index value used to
uniquely identify this Bits Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.3 |
bitsPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.4 |
bitsPortAdminStateThis object represents the Administrative State of the BITS
Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.5 |
bitsPortOperationalStateThis object represents the Operational State of the BITS
Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.6 |
bitsPortSecondaryStateThis object represents the Secondary State of the BITS
Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.7 |
bitsPortTypeThis object represents the BITS Port Type.ro BitsPortType .1.3.6.1.4.1.2544.1.12.4.1.16.1.8 |
bitsPortLineTypeThis object represents the BITS Port Line Type.
Determines whether the T1/E1 BITS port operates in T1, E1,
or 2048kHz mode.rw BitsPortLineType .1.3.6.1.4.1.2544.1.12.4.1.16.1.9 |
bitsPortLineCodeThis object represents the BITS Port Line Code.
When the port is configured for a Line Type of T1,
the valid values are t1-b8zs and t1-ami and the default value
is t1-b8zs. When the port is configured for a Line Type of E1,
the valid values are e1-hdb3 and e1-ami and the default value
is e1-hdb3. When the port is configured for a Line Type of
2048kHz, the value is none.rw BitsPortLineCode .1.3.6.1.4.1.2544.1.12.4.1.16.1.10 |
bitsPortFrameFormatThis object represents the BITS Port Frame Format.
When the port is configured for a Line Type of T1, the
valid values are t1-sf and t1-esf and the default value is t1-esf.
When the port is configured for a Line Type of E1, the
valid values are e1-unframed, e1-crc4, and e1-dualFrame
and the default value is e1-crc4. When the port is configured
for a Line Type of 2048kHz, the value is none.
R4.1CC and R4.3CC do not support e1-unframed.rw BitsFrameFormat .1.3.6.1.4.1.2544.1.12.4.1.16.1.11 |
bitsPortSaBitDesignationThis object represents the BITS Port Sa Bit Designation.
Determines which E1 Sa Bit is used to transmit/receive the SSM.
For T1 and 2048khz Line Types, the only allowed value is None.
For E1 Line Type, the default value is bit4 and it can
only have a value of None if QL Mode is disabled, otherwise,
None is an invalid value.rw SaBitDesignation .1.3.6.1.4.1.2544.1.12.4.1.16.1.12 |
bitsPortQLModeEnabledThis object allows to specify whether the BITS Port
can be enabled/disabled for QL Mode.
When enabled, on receive side
-port shall PEER the SSM (Sync Status Messages) slow protocol PDUs
and take appropriate action
When enabled, on transmit side
-port shall periodically (once a second) transmit QL TLV
information PDUs
When disabled, on receive side,
-port shall terminate and discard any SSM slow protocol PDUs
When disabled, on transmit side
-port shall not transmit any SSM slow protocol PDUs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.16.1.13 |
bitsPortExpectedQLThis object allows to specify the expected QL when the
BITS Port is enabled for QL Mode.
This object allows the user to set a minimum
expected received Quality Level on the port.
The default value shall be None.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.14 |
bitsPortAssumedQLThis object allows to specify the assumed QL on the
BITS Port. The Assumed QL is only meaningful if the
Network Clock Type (see fsp150cm-sync.mib) is option1 and the
port's QL Mode is disabled and the port is being used as
an input reference source. Under these conditions,
the specified QL value is assumed to be the Quality Level of the
non-failed reference.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.15 |
bitsPortReceivedQLThis object provides the Received QL value for the BITS port.
If the BITS port's QL Mode is disabled, then the received
QL value is not applicable.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.16 |
bitsPortTransmitQLThis object provides the Transmitted QL value for the BITS port.
If the BITS port's QL Mode is disabled, then the received
QL value is not applicable.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.17 |
bitsPortSquelchQLThis object allows to set the Squelch QL for the BITS-OUT port.
The Squelch QL is only meaningful if the QL Mode is Enabled.
The Squelch QL is used to determine whether or not to squelch
the output of the BITS-OUT port. If the system's QL is lower
than the Squelch QL, the output is squelched.
If the BITS port's QL Mode is disabled, then the received
QL value is not applicable.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.16.1.18 |
bitsPortLineBuildOutThis object allows to manage the line build out on the BITS-OUT port when
the Line Type is T1.rw LineBuildOut .1.3.6.1.4.1.2544.1.12.4.1.16.1.19 |
bitsPortImpedanceThis object provides the impedance mode for the BITS-OUT port.ro BitsPortImpedanceMode .1.3.6.1.4.1.2544.1.12.4.1.16.1.20 |
ieee1588EthernetPortTableA list of entries corresponding to IEEE Ethernet Port
Facilities for configuration purposes. SEQUENCE OF IEEE1588EthernetPortEntry .1.3.6.1.4.1.2544.1.12.4.1.17 |
ieee1588EthernetPortEntryA conceptual row in the IEEE Ethernet Port Table. IEEE1588EthernetPortEntry .1.3.6.1.4.1.2544.1.12.4.1.17.1 |
ieee1588EthernetPortIndexAn integer index value used to uniquely identify
the IEEE Ethernet Port.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.17.1.1 |
ieee1588EthernetPortIfIndexThis object has the same value as ifIndex for
the IEEE Ethernet Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.17.1.2 |
ieee1588EthernetPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.17.1.3 |
ieee1588EthernetPortAdminStateThis object represents the Administrative State of the
Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.17.1.4 |
ieee1588EthernetPortOperationalStateThis object represents the Operational State of the
Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.17.1.5 |
ieee1588EthernetPortSecondaryStateThis object represents the Secondary State of the
Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.17.1.6 |
ieee1588EthernetPortMTUThis object provides the MTU on the Port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.17.1.7 |
ieee1588EthernetPortMediaTypeThis object represents the type of Media.rw EthernetMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.17.1.8 |
ieee1588EthernetPortConfigSpeedThis object allows to configure the speed of the Port.rw EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.17.1.9 |
ieee1588EthernetPortNegotiatedSpeedThis object provides the negotiated speed of the
Port.ro EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.17.1.10 |
ieee1588EthernetPortMDIXTypeThis object allows management of MDIX property on
Port.rw CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.17.1.11 |
gps10MHzPortTableA list of entries corresponding to GPS 10MHz
Facilities for configuration purposes. SEQUENCE OF GPS10MHzPortEntry .1.3.6.1.4.1.2544.1.12.4.1.18 |
gps10MHzPortEntryA conceptual row in the GPS 10MHz Port Table. GPS10MHzPortEntry .1.3.6.1.4.1.2544.1.12.4.1.18.1 |
gps10MHzPortIndexAn integer index value used to uniquely identify
the IEEE Ethernet Port.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.18.1.1 |
gps10MHzPortIfIndexThis object has the same value as ifIndex for
the IEEE Ethernet Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.2 |
gps10MHzPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.3 |
gps10MHzPortAdminStateThis object represents the Administrative State of the
Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.4 |
gps10MHzPortOperationalStateThis object represents the Operational State of the
Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.5 |
gps10MHzPortSecondaryStateThis object represents the Secondary State of the
Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.6 |
gps10MHzPortSignalDirectionThis object allows specification of the signal type
(i.e. input or output).rw SignalDirectionType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.7 |
gps10MHzPortSquelchControlThis object allows to set the Squelch Control for the 10MHz port.
The Squelch Control is used to determine the type of squelch control
used to squelch the output of the TOD port. Only option supported
is squelch-ql.rw SquelchControl (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.8 |
gps10MHzPortSquelchQLThis object allows to set the Squelch QL for the 10MHz port.
This value is used when f310MHzClockPortSquelchControl is squelch-ql.
The Squelch QL is used to determine whether or not to squelch
the output of the TOD port. If the system's QL is lower
than the Squelch QL, the output is squelched.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.9 |
gps10MHzPortFrequencySourceThis object allows to set the Frequency Source for the Port.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.18.1.10 |
gps10MHzPortClockClassThis object specify GPS port clock class.rodeprecated Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.18.1.11 |
gps10MHzPortClockAccuracyThis object specify GPS port clock accuracy.rodeprecated Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.18.1.12 |
gps10MHzPortTimeSourceThis object specify GPS port time source.rodeprecated TimeSource (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.13 |
gps10MHzPortAssumedQLThis object allows to specify the assumed QL on the
GPS Port. The Assumed QL is only meaningful if the
Network Clock Type (see fsp150cm-sync.mib) is option1 and the
port's QL Mode is disabled and the port is being used as
an input reference source. Under these conditions,
the specified QL value is assumed to be the Quality Level of the
non-failed reference.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.18.1.14 |
gps10MHzPortAliasThis object allows SNMP management entities to provide an
alias to the gps 10MHz Port entity.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.18.1.15 |
cmEthernetNetPortClbTableA list of entries corresponding to Ethernet Network Port
Cable Length Benchmark. SEQUENCE OF CmEthernetNetPortClbEntry .1.3.6.1.4.1.2544.1.12.4.1.19 |
cmEthernetNetPortClbEntryA conceptual row in the cmEthernetNetPortClbTable.
These entries represent Cable Length Benchmarks
on the Ethernet Network Port. CmEthernetNetPortClbEntry .1.3.6.1.4.1.2544.1.12.4.1.19.1 |
cmEthernetNetPortClbIndexAn integer index value used to uniquely identify
this Cable Length Benchmark Entry specification.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.19.1.1 |
cmEthernetNetPortClbEnabledThis enables specification of Cable Length Benchmark entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.19.1.2 |
cmEthernetNetPortClbLengthCable length of Cable Points Entry. The cable length is of
the form XXX[.YY] where XX can be any integer value and YY
allows precision of 2 decimals after the floating point. Note
that .YY is optional.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.19.1.3 |
cmEthernetNetPortClbDescrA textual string containing description of cable span.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.19.1.4 |
cmNetPortPrioMapTableA list of entries corresponding to Ethernet Network Port Priority Mappings
in multi Class of Service (COS) mode. SEQUENCE OF CmNetPortPrioMapEntry .1.3.6.1.4.1.2544.1.12.4.1.20 |
cmNetPortPrioMapEntryA conceptual row in the cmNetPortPrioMapTable. CmNetPortPrioMapEntry .1.3.6.1.4.1.2544.1.12.4.1.20.1 |
cmNetPortPrioMapIndexThe integer index value corresponding to a priority value.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.20.1.1 |
cmNetPortPrioMapInPriorityThe integer index value corresponding to a priority value.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.20.1.2 |
cmNetPortPrioMapCOSThis allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.20.1.3 |
cmNetPortPrioMapOuterTagPriorityThis allows specification of the VLAN priority that
will replace the outgoing (N2A direction) outer-tag's priority.
Note that, each flow participates or not in outer-tag
priority mapping, using the object 'cmFlowN2AOuterTagPrioEnabled'.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.20.1.4 |
cmAccPortPcpDEEncTableEthernet Access Port PCP drop eligibility encoding table. This
is applied to a frame that is egressing at the Access port. SEQUENCE OF CmAccPortPcpDEEncEntry .1.3.6.1.4.1.2544.1.12.4.1.21 |
cmAccPortPcpDEEncEntryA conceptual row in the ethernetPBPcpDEEncPortTable. CmAccPortPcpDEEncEntry .1.3.6.1.4.1.2544.1.12.4.1.21.1 |
cmAccPortPcpDEEncIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible encoding table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.21.1.1 |
cmAccPortPcpDEEncInPriorityThis object is the input priority that is translated to a
drop eligibility priority or a drop ineligibility priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.21.1.2 |
cmAccPortPcpDEEncDropIneligiblePrioThis object is the PCP value that has a priority value with
implicit drop ineligibility encoded into it.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.21.1.3 |
cmAccPortPcpDEEncDropEligiblePrioThis object is the PCP value that has a priority value with
implicit drop eligibility encoded into it.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.21.1.4 |
cmAccPortPcpDEDecTableEthernet Access Port PCP drop eligibility decoding table. This
is applied to a frame that is ingressing at a port. SEQUENCE OF CmAccPortPcpDEDecEntry .1.3.6.1.4.1.2544.1.12.4.1.22 |
cmAccPortPcpDEDecEntryA conceptual row in the ethernetPBPcpDEDecPortTable. CmAccPortPcpDEDecEntry .1.3.6.1.4.1.2544.1.12.4.1.22.1 |
cmAccPortPcpDEDecIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible decoding table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.22.1.1 |
cmAccPortPcpDEDecInPriorityThis object is the input priority that is decoded to get
priority and the drop eligibility of a frame.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.22.1.2 |
cmAccPortPcpDEDecOutPriorityThis object is the priority value decoded from a incoming PCP value.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.22.1.3 |
cmAccPortPcpDEDecDropEligibleThis object is the drop eligibility decoded from a incoming
PCP value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.22.1.4 |
cmAccPortPcpDEPairTableEthernet Access Port PCP drop eligibility priority pair table.
The priority pair is encoded to same drop eligibility and
drop ineligibility priority. Depending on the PCP DE Enc/Dec
mode there can be upto 3 pairs in the table. There will one
pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D. SEQUENCE OF CmAccPortPcpDEPairEntry .1.3.6.1.4.1.2544.1.12.4.1.23 |
cmAccPortPcpDEPairEntryA conceptual row in the cmAccPortPcpDEPairEntry. CmAccPortPcpDEPairEntry .1.3.6.1.4.1.2544.1.12.4.1.23.1 |
cmAccPortPcpDEPairIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible priority pair table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.23.1.1 |
cmAccPortPcpDEDropIneligiblePrioThis object is the drop ineligible priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.23.1.2 |
cmAccPortPcpDEDropEligiblePrioThis object is the drop eligible priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.23.1.3 |
cmNetPortPcpDEEncTableEthernet Network Port PCP drop eligibility encoding table. This
is applied to a frame that is egressing at the Network port. SEQUENCE OF CmNetPortPcpDEEncEntry .1.3.6.1.4.1.2544.1.12.4.1.24 |
cmNetPortPcpDEEncEntryA conceptual row in the ethernetPBPcpDEEncPortTable. CmNetPortPcpDEEncEntry .1.3.6.1.4.1.2544.1.12.4.1.24.1 |
cmNetPortPcpDEEncIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible encoding table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.24.1.1 |
cmNetPortPcpDEEncInPriorityThis object is the input priority that is translated to a
drop eligibility priority or a drop ineligibility priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.24.1.2 |
cmNetPortPcpDEEncDropIneligiblePrioThis object is the PCP value that has a priority value with
implicit drop ineligibility encoded into it.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.24.1.3 |
cmNetPortPcpDEEncDropEligiblePrioThis object is the PCP value that has a priority value with
implicit drop eligibility encoded into it.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.24.1.4 |
cmNetPortPcpDEDecTableEthernet Network Port PCP drop eligibility decoding table. This
is applied to a frame that is ingressing at a port. SEQUENCE OF CmNetPortPcpDEDecEntry .1.3.6.1.4.1.2544.1.12.4.1.25 |
cmNetPortPcpDEDecEntryA conceptual row in the ethernetPBPcpDEDecPortTable. CmNetPortPcpDEDecEntry .1.3.6.1.4.1.2544.1.12.4.1.25.1 |
cmNetPortPcpDEDecIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible decoding table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.25.1.1 |
cmNetPortPcpDEDecInPriorityThis object is the input priority that is decoded to get
priority and the drop eligibility of a frame.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.25.1.2 |
cmNetPortPcpDEDecOutPriorityThis object is the priority value decoded from a incoming PCP value.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.25.1.3 |
cmNetPortPcpDEDecDropEligibleThis object is the drop eligibility decoded from a incoming
PCP value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.25.1.4 |
cmNetPortPcpDEPairTableEthernet Network Port PCP drop eligibility priority pair table.
The priority pair is encoded to same drop eligibility and
drop ineligibility priority. Depending on the PCP DE Enc/Dec
mode there can be upto 3 pairs in the table. There will one
pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D. SEQUENCE OF CmNetPortPcpDEPairEntry .1.3.6.1.4.1.2544.1.12.4.1.26 |
cmNetPortPcpDEPairEntryA conceptual row in the cmNetPortPcpDEPairEntry. CmNetPortPcpDEPairEntry .1.3.6.1.4.1.2544.1.12.4.1.26.1 |
cmNetPortPcpDEPairIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible priority pair table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.26.1.1 |
cmNetPortPcpDEDropIneligiblePrioThis object is the drop ineligible priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.26.1.2 |
cmNetPortPcpDEDropEligiblePrioThis object is the drop eligible priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.26.1.3 |
cmEthernetTrafficPortTableA list of entries corresponding to Ethernet
Facilities for configuration purposes. SEQUENCE OF CmEthernetTrafficPortEntry .1.3.6.1.4.1.2544.1.12.4.1.27 |
cmEthernetTrafficPortEntryA conceptual row in the cmEthernetTrafficPortTable. CmEthernetTrafficPortEntry .1.3.6.1.4.1.2544.1.12.4.1.27.1 |
cmEthernetTrafficPortIndexAn integer index value used to uniquely identify
this Ethernet Port within a card.
Note that each Ethernet Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, cmEthernetTrafficPortIndex.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.1 |
cmEthernetTrafficPortIfIndexThis object has the same value as ifIndex for
Ethernet Port. An integer index value used to
uniquely identify this Ethernet Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.2 |
cmEthernetTrafficPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.3 |
cmEthernetTrafficPortAdminStateThis object represents the Administrative State of the Ethernet Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.4 |
cmEthernetTrafficPortOperationalStateThis object represents the Operational State of the Ethernet Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.5 |
cmEthernetTrafficPortSecondaryStateThis object represents the Secondary State of the Ethernet Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.6 |
cmEthernetTrafficPortMTUThis object provides the MTU on the Ethernet Port.
The object is made read-write for FSP150CC devices.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.7 |
cmEthernetTrafficPortMediaTypeThis object represents the type of Ethernet Media on the
Ethernet Port.
The media type includes,
copper (1)
fiber (2)
coppersfp (3)
CM Aggregation Product doesn't support copper.rw EthernetMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.8 |
cmEthernetTrafficPortConfigSpeedThis object allows to configure the speed of the
Ethernet Port.rw EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.9 |
cmEthernetTrafficPortNegotiatedSpeedThis object provides the negotiated speed of the
Ethernet Port.ro EthernetPortSpeed (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.10 |
cmEthernetTrafficPortMDIXTypeThis object allows management of MDIX property on
Ethernet Port.rw CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.27.1.11 |
cmEthernetTrafficPortMDIXStatusThis object provides the current MDIX status of the
Ethernet port.ro CmEthernetMDIXType .1.3.6.1.4.1.2544.1.12.4.1.27.1.12 |
cmEthernetTrafficPortSfpVendorNameThis object provides the vendor name of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.13 |
cmEthernetTrafficPortSfpPartNumberThis object provides the part number of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.14 |
cmEthernetTrafficPortSfpSerialNumberThis object provides the serial number of the SFP.
This is shown only when cmEthernetTrafficPortMediaType is fiber.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.15 |
cmEthernetTrafficPortSfpDateOfManufactureThis object provides the date of manufacture of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.16 |
cmEthernetTrafficPortSfpConnectorValueThis object provides the SFP connector value.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp.ro SfpConnectorValue (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.17 |
cmEthernetTrafficPortSfpLinkLengthThis object provides the SFP Link Length.
This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.18 |
cmEthernetTrafficPortSfpLaserWaveLengthThis object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetTrafficPortMediaType is fiber.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.19 |
cmEthernetTrafficPortSfpMediaTypeThis object provides the SFP Media Type.
This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp.ro SfpMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.20 |
cmEthernetTrafficPortLoopbackConfigThis object allows to initiate loopbacks on
on the Ethernet Port.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.27.1.21 |
cmEthernetTrafficPortLoopbackStatusThis object provides status of the current loopback
on the Ethernet Port.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.27.1.22 |
cmEthernetTrafficPortLoopbackTimeThis object allows to specify time for timed-loopbacks on
on the Ethernet Port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.23 |
cmEthernetTrafficPortLoopbackSwapSADAThis object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped.rw CmSwapSADAType .1.3.6.1.4.1.2544.1.12.4.1.27.1.24 |
cmEthernetTrafficPortOuterVlanLoopbackMaskThis object allows specification of the outer VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loopback. The various bit positions are:
1 Outer VLAN 1 Loopback Enabled
2 Outer VLAN 2 Loopback Enabled
4 Outer VLAN 3 Loopback Enabledrw INTEGER .1.3.6.1.4.1.2544.1.12.4.1.27.1.25 |
cmEthernetTrafficPortOuterVlanLoopback1This object allows specification of the outer VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.26 |
cmEthernetTrafficPortOuterVlanLoopback2This object allows specification of the outer VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.27 |
cmEthernetTrafficPortOuterVlanLoopback3This object allows specification of the outer VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.28 |
cmEthernetTrafficPortLinkLossFwdEnabledThis object allows enabling/disabling link loss forwarding
on the Ethernet Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.29 |
cmEthernetTrafficPortLinkLossFwdSignalTypeThis object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetTrafficPortLinkLossFwdEnabled is enabled.rw CmLinkLossFwdSignalType .1.3.6.1.4.1.2544.1.12.4.1.27.1.30 |
cmEthernetTrafficPortLinkLossFwdTriggerTypesThis object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetTrafficPortLinkLossFwdEnabled is enabled.rw CmLinkLossFwdTriggerTypes .1.3.6.1.4.1.2544.1.12.4.1.27.1.31 |
cmEthernetTrafficPortLinkLossFwdDelayThis object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.32 |
cmEthernetTrafficPortLinkLossFwdActiveThis object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.33 |
cmEthernetTrafficPortLinkLossFwdPartnerEnabledThis object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.34 |
cmEthernetTrafficPortLinkLossFwdLocalLinkIdThis object allows configuration of the Local Link Id on
Ethernet port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.35 |
cmEthernetTrafficPortLinkLossFwdRemoteLinkIdsThis object allows enabling/disabling Remote Link Ids
on Ethernet port. the Ethernet port is able to distinguish
the remote side client ports from the Remote Link Down
PDUs coming from remote end. The cmEthernetTrafficPortLinkLossFwdLocalLinkId must
be set before set cmEthernetTrafficPortLinkLossFwdRemoteLinkIds,
By setting the Remote Link Ids seperated by the comma,
e.g. 1,2,3,10,20..., up to 10 remote ID numbers
can be added, number ranger is from 1 to 256(for EGX8.1, max value is 554).
By setting nothing or '' to disable the Remote Link Ids.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.36 |
cmEthernetTrafficPortLinkLossFwdTxActionTypeThis object allows to specify the Ethernet Port's behavior when
link loss forwarding trigger events occur on the Port.
This provides ability to configure per Ethernet port LLF behavior.rw CmLinkLossFwdTxActionType .1.3.6.1.4.1.2544.1.12.4.1.27.1.37 |
cmEthernetTrafficPortLinkLossFwdRxRLDLinkIdsThis object provides the received Remote Link IDs in
EFM RLD messages on the Ethernet Port.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.38 |
cmEthernetTrafficPortOamIdOAM Id. This is unique EFM OAM sublayer port id.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.39 |
cmEthernetTrafficPortOamDiscoveryStateEthernet Port's OAM discovery state.ro CmOamDiscoveryState .1.3.6.1.4.1.2544.1.12.4.1.27.1.40 |
cmEthernetTrafficPortOamLocalVarRtrvsEnabledThis object allows specification of whether the Ethernet
Port supports sending variable response OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.41 |
cmEthernetTrafficPortOamLocalLinkEventsEnabledThis object allows specification of whether the Ethernet
Port supports interpreting Link Events.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.42 |
cmEthernetTrafficPortOamLocalOamLoopbacksSupportedThis object allows specification of whether the Ethernet
Port is capable of OAM remote loopback mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.43 |
cmEthernetTrafficPortOamLocalUnidirSupportEnabledThis object allows specification of whether the Ethernet
Port is capable of sending OAMPDUs when the receive path
is non-operational.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.44 |
cmEthernetTrafficPortOamLocalMaxPDUSizeThis object represents the largest OAMPDU, in octets,
supported by the Ethernet Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two is used.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.45 |
cmEthernetTrafficPortOamLocalModeThis object allows to configure the OAM sublayer entity in
either Active or Passive mode.rw CmOamMode .1.3.6.1.4.1.2544.1.12.4.1.27.1.46 |
cmEthernetTrafficPortOamRemoteMacAddressThis object allows retrieval of the Remote Mac Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.47 |
cmEthernetTrafficPortOamRemoteVarRtrvsEnabledThis object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.48 |
cmEthernetTrafficPortOamRemoteLinkEventsEnabledThis object allows retrieval of whether the remote OAM
entity supports interpreting Link Events.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.49 |
cmEthernetTrafficPortOamRemoteOamLoopbacksSupportedThis object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.50 |
cmEthernetTrafficPortOamRemoteUnidirSupportEnabledThis object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.51 |
cmEthernetTrafficPortOamRemoteMaxPDUSizeThis object allows retrieval of the remote OAM
entity maximum OAMPDU size.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.52 |
cmEthernetTrafficPortOamRemoteModeThis object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode.ro CmOamMode .1.3.6.1.4.1.2544.1.12.4.1.27.1.53 |
cmEthernetTrafficPortOamEnabledThis object allows to manage the EFM OAM on Ethernet Traffic Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.54 |
cmEthernetTrafficPortOamAdminStateThis object provides the EFM OAM Admin State.ro CmOamAdminState .1.3.6.1.4.1.2544.1.12.4.1.27.1.55 |
cmEthernetTrafficPortSvcTypeThis object allows specification of whether the
Ethernet Port is port based or vlan based.rw CmEthernetTrafficSvcType .1.3.6.1.4.1.2544.1.12.4.1.27.1.56 |
cmEthernetTrafficPortRxPauseEnabledThis object defines the RxPause enable or disable of the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.57 |
cmEthernetTrafficPortTxPauseEnabledThis object allows enabling/disabling transmit pause frames on
Ethernet port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.58 |
cmEthernetTrafficPortAfpTypeThis object allows specification of the Acceptable Frame Policy on
Ethernet port. Users can specify whether the port supports
only tagged frames, only untagged frames or both tagged and
untagged frames.rw CmAfpType .1.3.6.1.4.1.2544.1.12.4.1.27.1.59 |
cmEthernetTrafficPortShapingEnabledThis object allows to manage the Ethernet Port Shaping.
When enabled, values in cmEthernetTrafficPortShapedSpeedLo and
cmEthernetTrafficPortShapedSpeedHi are applicable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.60 |
cmEthernetTrafficPortShapedSpeedLoThis object allows to specify the lower 32 bits of
the Ethernet Port Shaped speed. This value is applicable
when cmEthernetTrafficPortShapingEnabled is enabled.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.61 |
cmEthernetTrafficPortShapedSpeedHiThis object allows to specify the higher 32 bits of
the Port Shaped speed. This value is applicable
when cmEthernetTrafficPortShapingEnabled is enabled.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.62 |
cmEthernetTrafficPortQinQEtherTypeThis object allows to specify the Q-in-Q Ether Type
on the Port.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.63 |
cmEthernetTrafficPortTagFrameControlThis object defines if c-tag/s-tag frame is allowed to pass through,
available only when AFP is set to Tagged.rw AfpTagControl (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.64 |
cmEthernetTrafficPortEgressVlanTrunkingEnabledThis object allows to enable or disable the VLAN trunking on
Ethernet port. Disabling VLAN trunking removes all
VLAN tags before transmitting traffic out of the port.
This object is only applicable for connection-oriented,
evpl service type.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.65 |
cmEthernetTrafficPortIngressPushPVIDEnabledThis object allows to specify whether cmEthernetTrafficPortPortVlanId
value will be PUSHed on untagged frames or not in the
ingress direction. This object is only applicable
for connection-oriented, evpl service type.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.66 |
cmEthernetTrafficPortEgressPopPVIDEnabledThis object allows to specify whether cmEthernetTrafficPortPortVlanId
value will be POPed in the
egress direction. This object is only applicable
for connection-oriented, evpl service type.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.67 |
cmEthernetTrafficPortEgressPopPriorityVidEnabledThis object defines the egress PopPriorityVid enable or disable of the port.
If it is enabled, the outgoing packets with VID=Priority VLAN ID
will be swapped back to VID=0.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.68 |
cmEthernetTrafficPortPortVlanIdThis object allows to specify the Ethernet Port VLAN Id
to PUSH on untagged frames in the to Network
direction. This object is only applicable for connection-oriented,
evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled
is set to true.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.69 |
cmEthernetTrafficPortPortVlanPriorityThis object allows to specify the Ethernet Port VLAN Priority
for the PUSHed VLAN tag (specified by cmEthernetTrafficPortPortVlanId)
on untagged frames in the ingress direction.
This object is only applicable for connection-oriented,
evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled
is set to true.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.70 |
cmEthernetTrafficPortPriorityVlanIdThis object allows to specify the Ethernet Priority VLAN Id
to replace the null-tagged or priority tagged frames in the
to ingress direction. This object is only applicable
for connection-oriented, evpl service type.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.71 |
cmEthernetTrafficPortIngressPrioMapModeThis object allows to specify the Ethernet Port
Priority Mapping Mode used for classification of frames.
This object is only applicable for connection-oriented,
evpl service type.rw PriorityMapMode (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.72 |
cmEthernetTrafficPortIngressCOSPriorityThis object is used to specify whether the EthernetTrafficPort
uses the inner-tag or the outer-tag in determining the COS (Class of Service).rw VlanTagType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.73 |
cmEthernetTrafficPortSyncEEnabledThis object allows to specify whether the Ethernet Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable ports.
When enabled, on receive side
-port can extract the frequency of its input signal
and pass the recovered clock to the system clock
-port processes the ESMC(Ethernet Synchronization Messaging
Channel) and extracts the QL (when also QL enabled)
-port is eligible to be selected as a system clock reference
When enabled, on transmit side
-port's transmit clock is locked to the system clock
-port generates an ESMC to generate a QL (when also QL enabled)
When disabled, on receive side,
-port does not pass the recovered clock to the system clock
-port does not process the ESMC (if present)
-port is not eligible to be selected as a
system clock reference
When disabled, on transmit side
-port's output frequency may be synchronized to the system clock
-port does not generate an ESMC.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.74 |
cmEthernetTrafficPortQLModeEnabledThis object allows to specify whether the Ethernet Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetTrafficPortQLModeEnabled is set to true.
When enabled, on receive side
-port shall PEER the SSM (Sync Status Messages) slow protocol PDUs
and take appropriate action
When enabled, on transmit side
-port shall periodically (once a second) transmit QL TLV
information PDUs
When disabled, on receive side,
-port shall terminate and discard any SSM slow protocol PDUs
When disabled, on transmit side
-port shall not transmit any SSM slow protocol PDUs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.75 |
cmEthernetTrafficPortExpectedQLThis object allows to specify the expected QL when the
Ethernet Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEthernetTrafficPortQLModeEnabled is set to true.
This object allows the user to set a minimum
expected received Quality Level on the port. The valid values
depend upon the SYNC entity Network Clock Type. A value of
None represents that a minimum Quality Level is not expected.
The default value shall be None.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.76 |
cmEthernetTrafficPortAssumedQLThis object allows to specify the assumed QL on the
Ethernet Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaningful if the Network Clock Type
(see fsp150cm-sync.mib) is option1 and the
port TransmitQL Mode is disabled and the port is being used as
an input reference source. Under these conditions,
the specified QL value is assumed to be the Quality Level of the
non-failed reference.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.77 |
cmEthernetTrafficPortReceivedQLThis object provides the Received QL value for the Ethernet port.
If the Ethernet port TransmitQL Mode is disabled, then the received
QL value is not applicable.This object is only applicable for
Synchronous Ethernet capable ports.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.78 |
cmEthernetTrafficPortTransmitQLThis object provides the Transmitted QL value for the Ethernet port.
If the Ethernet port TransmitQL Mode is disabled, then the received
QL value is not applicable. This object is only applicable for
Synchronous Ethernet capable ports.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.79 |
cmEthernetTrafficPortPhyTypeThis object is valid only to XGE card. And the value should be LAN or WAN when
it is XGE card.rw XgePhyType .1.3.6.1.4.1.2544.1.12.4.1.27.1.80 |
cmEthernetTrafficPortSfpLaserWaveLengthPicometerThis object provide laser wavelength pico value.
For example, laser wavelength is 1510.01,
then cmEthernetTrafficPortSfpLaserWaveLength=1510
and cmTrafficPortSfpLaserWaveLengthPicometer=10.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.81 |
cmEthernetTrafficPortRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of cmEthernetTrafficPortRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
neRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmEthernetTrafficPortRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.82 |
cmEthernetTrafficPortSSMRemoteMacAddressThis object allows retrieval of the Remote Mac Address, when
the port is peering using SSM.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.83 |
cmEthernetTrafficPortInnerVlanLoopbackMaskThis object allows specification of the inner VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loopback. The various bit positions are:
1 Inner VLAN 1 Loopback Enabled
2 Inner VLAN 2 Loopback Enabled
4 Inner VLAN 3 Loopback Enabledrw INTEGER .1.3.6.1.4.1.2544.1.12.4.1.27.1.84 |
cmEthernetTrafficPortInnerVlanLoopback1This object allows specification of the inner VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.85 |
cmEthernetTrafficPortInnerVlanLoopback2This object allows specification of the inner VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.86 |
cmEthernetTrafficPortInnerVlanLoopback3This object allows specification of the inner VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask
is set. The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.87 |
cmEthernetTrafficPortLaserWDMChannelChannel number of WDM tunable XFP setting.rw SfpChannelIdentifier .1.3.6.1.4.1.2544.1.12.4.1.27.1.88 |
cmEthernetTrafficPortLaserIsTunableThis object means this module whether tunnable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.89 |
cmEthernetTrafficPortLaserFrequencyThis object describes this module's frequency, and the step is 1GHZ.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.90 |
cmEthernetTrafficPortDeiEnableThis object describes whether use DEI bit in S-tag to
recognize Drop Eligibility Parameter for ingress S-tag packets or Set
DEI bit for egress S-tag Packets.
This object is still supported by OSA8.1.1rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.91 |
cmEthernetTrafficPortPcpDEEncTypeThis object describes the PCP encoding mode for egress packets
and the PCP decoding mode for ingress packets on this port.rw PcpDEEncType .1.3.6.1.4.1.2544.1.12.4.1.27.1.92 |
cmEthernetTrafficPortPcpDEPairsActionThis object describes this port pcp de pairs action.rw PcpDEPairsAction .1.3.6.1.4.1.2544.1.12.4.1.27.1.93 |
cmEthernetTrafficPortInitiateDiagThis object allows to initiate Etherjack diagnosis on the
Ethernet Traffic Port.rw CmEthernetDiagAction .1.3.6.1.4.1.2544.1.12.4.1.27.1.94 |
cmEthernetTrafficPortDiagnosePair1CondThis object provides diagnosis results for the cable Pair 1
on Ethernet Traffic Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.27.1.95 |
cmEthernetTrafficPortDiagnosePair2CondThis object provides diagnosis results for the cable Pair 2
on Ethernet Traffic Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.27.1.96 |
cmEthernetTrafficPortDiagnosePair3CondThis object provides diagnosis results for the cable Pair 3
on Ethernet Traffic Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.27.1.97 |
cmEthernetTrafficPortDiagnosePair4CondThis object provides diagnosis results for the cable Pair 4
on Ethernet Traffic Port.ro CmDiagCableCondType .1.3.6.1.4.1.2544.1.12.4.1.27.1.98 |
cmEthernetTrafficPortDiagnoseAutoNegCondThis object provides auto negotiation results of the diagnosis
test on Ethernet Traffic Port.ro CmDiagAutoNegCondType .1.3.6.1.4.1.2544.1.12.4.1.27.1.99 |
cmEthernetTrafficPortDiagnoseLpbkCondThis object provides port loopback results of the diagnosis
test on Ethernet Traffic Port.ro CmDiagLpbkCondType .1.3.6.1.4.1.2544.1.12.4.1.27.1.100 |
cmEthernetTrafficPortDiagnoseEfmLpbkCondThis object provides remote EFM loopback results of the diagnosis
test on Ethernet Traffic Port.ro CmDiagEfmOamLpbkCondType .1.3.6.1.4.1.2544.1.12.4.1.27.1.101 |
cmEthernetTrafficPortDiagnoseResultThis object provides results of the diagnosis
test in string form on Ethernet Traffic Port.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.27.1.102 |
cmEthernetTrafficPortDiagnoseTestStatusThis object provides the current status of the diagnosis
test on Ethernet Traffic Port.ro CmDiagTestStatus .1.3.6.1.4.1.2544.1.12.4.1.27.1.103 |
cmEthernetTrafficPortDiagnoseTestTimeThis object provides the time when diagnosis test was last executed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.104 |
cmEthernetTrafficPortAutoDiagEnabledThis object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.105 |
cmEthernetTrafficPortDeleteEntitiesActionThis object allows to delete esa entities relate this port and
Cfm entities relate this port.rw TrafficPortDeleteEntitiesAction .1.3.6.1.4.1.2544.1.12.4.1.27.1.106 |
cmEthernetTrafficPortMaxMpFpNumThis object allows to set the mpflow max fp number, and now only the ports on ethernet10x1GCard,
ethernet1x10GCard, ethernet1x10GHighPerCard, ethernet10x1GHighPerCard support this attribute. for
others, cann't be set and will return 0.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.27.1.107 |
cmEthernetTrafficPortJdsuLoopbackEnabledThis object allows to enable or disable jdsu loopback on this port.
Note: This object is deprecated.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.108 |
cmEthernetTrafficPortJdsuLoopbackVlanIdThis object allows to set the jdsu loopback vlan.
if status is jdsu-terminal-port-tailend(19) or jdsu-facility-port-tailend(21),
then VID is 0 means not applicable.
Note: This object is deprecated.rodeprecated VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.27.1.109 |
cmEthernetTrafficPortIngressPopPriorityVidEnabledThis object defines the Ingress PopPriorityVid enable or disable of the port.
If it is enabled, then incoming priority tagged
packet's VID is swapped to Priority VLAN ID.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.27.1.110 |
cmEthernetTrafficPortRxDeiActionThis object allows to specify
the Receive DEI Action.rw RxDeiAction .1.3.6.1.4.1.2544.1.12.4.1.27.1.111 |
cmEthernetTrafficPortTxDeiActionThis object allows to specify
the Transmit DEI Action.rw TxDeiAction .1.3.6.1.4.1.2544.1.12.4.1.27.1.112 |
cmEthernetTrafficPortRxDeiOuterTagTypeThis object allows to specify
the Receive DEI Outer Tag Type.rw DeiOuterTagType .1.3.6.1.4.1.2544.1.12.4.1.27.1.113 |
cmEthernetTrafficPortTxDeiOuterTagTypeThis object allows to specify
the Transmit DEI Outer Tag Type.rw DeiOuterTagType .1.3.6.1.4.1.2544.1.12.4.1.27.1.114 |
cmElineFlowTableA list of entries corresponding to Flows
for configuration purposes. SEQUENCE OF CmElineFlowEntry .1.3.6.1.4.1.2544.1.12.4.1.28 |
cmElineFlowEntryA conceptual row in the cmElineFlowTable. These entries represent
an Flow. CmElineFlowEntry .1.3.6.1.4.1.2544.1.12.4.1.28.1 |
cmElineFlowIndexThe integer index value corresponding to an Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.28.1.1 |
cmElineFlowCircuitNameThis object allows SNMP management entities to provide a
circuit identifier with the Flow.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.28.1.2 |
cmElineFlowAdminStateThis object represents the Administrative State of the Flow.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.28.1.3 |
cmElineFlowOperationalStateThis object represents the Operational State of the Flow.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.28.1.4 |
cmElineFlowSecondaryStateThis object represents the Secondary State of the Flow.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.28.1.5 |
cmElineFlowFP1This object allows SNMP management entities to provide a
flowpoint with the Flow.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.28.1.6 |
cmElineFlowFP2This object allows SNMP management entities to provide another
flowpoint with the Flow.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.28.1.7 |
cmElineFlowStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.28.1.8 |
cmElineFlowRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmElineFlowRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmElineFlowRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmElineFlowRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.28.1.9 |
cmFlowPointTableA list of entries corresponding to FlowPoint
for configuration purposes. SEQUENCE OF CmFlowPointEntry .1.3.6.1.4.1.2544.1.12.4.1.29 |
cmFlowPointEntryA conceptual row in the cmFlowPointTable. These entries represent
an FlowPoint.
If the flowpoint attached to a lag, the slotIndex should
be 255(255 is used to identify the flowpoint belongs to lag),
and the cmEthernetTrafficPortIndex should be the f3LagIndex. CmFlowPointEntry .1.3.6.1.4.1.2544.1.12.4.1.29.1 |
cmFlowPointIndexThe integer index value corresponding to an FlowPoint.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.1 |
cmFlowPointCircuitNameThis object allows SNMP management entities to provide a
circuit identifier with the FlowPoint.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.29.1.2 |
cmFlowPointAdminStateThis object represents the Administrative State of the FlowPoint.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.29.1.3 |
cmFlowPointOperationalStateThis object represents the Operational State of the FlowPoint.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.29.1.4 |
cmFlowPointSecondaryStateThis object represents the Secondary State of the FlowPoint.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.29.1.5 |
cmFlowPointAssociatedFlowIdThis object provides the association of an Flow with an FlowPoint.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.6 |
cmFlowPointIngressMultiCOSThis object allows specification of ingress multiple COS (Class of Service) FlowPoint.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.7 |
cmFlowPointIngressCOSThis object allows specification of ingress COS (Class of Service) FlowPoint.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.8 |
cmFlowPointIngressVlanMemberListIt allows specification of VLAN members of the FlowPoint.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* or X (vlan X with all priorities),
*-Y (all vlans with priority Y), and X1:X2
(range of vlans from X1 to X2, all priorities). Members
with specific VLAN Id and specific VLAN Priority are not supported.
Once the flowpoint is created, this attribute can only be updated
using cmFlowPointVlanMemberAction and cmFlowPointVlanMemberActionVlan objects.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.29.1.9 |
cmFlowPointVlanMemberActionThis object allows to add or remove the VLAN members specified by
cmFlowPointVlanMemberActionVlan object. SNMP manager must first
configure the VLAN member to be added/removed in the object
cmFlowPointVlanMemberActionVlan and then should specify
cmFlowPointVlanMemberAction on whether to add/remove the specified
VLAN member.rw FlowVlanActionType .1.3.6.1.4.1.2544.1.12.4.1.29.1.10 |
cmFlowPointVlanMemberActionVlanThis object allows adding/removing VLAN members
to a flowpoint.
VLAN member is of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* (vlan X with all priorities),
*-Y (all vlans with priority Y), and X1:X2
(range of vlans from X1 to X2, all priorities).
Members with specific VLAN Id and
specific VLAN Priority are not supported.
In order to add/remove VLAN member to a flow, user must
specify this object with appropriate VLAN and then invoke
cmFlowPointVlanMemberAction.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.29.1.11 |
cmFlowPointIngressUntaggedFrameEnabledThis object allows to specify whether or not the flowpoint
supports untagged frame.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.12 |
cmFlowPointCTagControlThis object allows specification of the tag management
operation on the C-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
the VLAN Id (cmFlowPointCTagVlanId) and priority
(cmFlowPointCTagVlanPriority) are pushed onto the frame;
if the type is 'pushvid', only the VLAN Id (12 bits) is pushed,
the Priority is copied from incoming tag's priority;
if the type is 'swaptag', both VLAN Id and Priority (15 bits)
are swapped with the specified cmFlowPointCTagVlanId and
cmFlowPointCTagVlanPriority;
if the type is 'swapvid', only the VLAN Id (12 bits) are
swapped with the specified cmFlowPointCTagVlanId;
if the type is 'none', no C-TAG management is performed.rw FlowTagControl .1.3.6.1.4.1.2544.1.12.4.1.29.1.13 |
cmFlowPointCTagVlanIdThis object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowPointIngressCTagControl.
It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid'
control types.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.29.1.14 |
cmFlowPointCTagVlanPriorityThis object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowPointIngressCTagControl.
It is applicable for 'push' and 'swaptag' control types.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.29.1.15 |
cmFlowPointSTagControlThis object allows specification of the tag management
operation on the S-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
the VLAN Id (cmFlowPointSTagVlanId) and priority
(cmFlowPointSTagVlanPriority) are pushed onto the frame;
if the type is 'pushvid', only the VLAN Id (12 bits) is pushed,
the Priority is copied from incoming tag's priority;
if the type is 'swaptag', both VLAN Id and Priority (15 bits)
are swapped with the specified cmFlowPointSTagVlanId and
cmFlowPointSTagVlanPriority;
if the type is 'swapvid', only the VLAN Id (12 bits) are
swapped with the specified cmFlowPointSTagVlanId;
if the type is 'none', no S-TAG management is performed.rw FlowTagControl .1.3.6.1.4.1.2544.1.12.4.1.29.1.16 |
cmFlowPointSTagVlanIdThis object allows specification of the VLAN Id to
be pushed or swapped, based on the value of cmFlowPointIngressSTagControl.
It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid'
control types.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.29.1.17 |
cmFlowPointSTagVlanPriorityThis object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of cmFlowPointIngressSTagControl.
It is applicable for 'push' and 'swaptag' control types.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.29.1.18 |
cmFlowPointEgressOuterTagPrioMapEnabledThis object defines whether to use the Egress Prio Mapping to swap the priority of outer tag.
When Enabled,it indicates that the operation specified in the EgressPrioMapTable would be
applied to Flow for specified COS.
When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.19 |
cmFlowPointColorMarkingSupportedThis object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed
will be remarked according the meter result. If set to Disabled, the DEI bit is forced to 0.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.20 |
cmFlowPointAssociatedAclProfileThis object provides the association of an Flow with an ACL profile.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.21 |
cmFlowPointSESFramesLossThresholdRatioThis object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the flowpoint.
This functionality is applicable if the flowpoint is monitored
using the Y.1731 ESA functionality.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.22 |
cmFlowPointStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.23 |
cmFlowPointRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmFlowPointRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmFlowPointRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmFlowPointRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.24 |
cmFlowPointDefaultMemberEnableddefaultMemberEnabled with enabled means that on this FP,
the membership is all the tag packets without match any
other membership associated to the port. Untagged means
untagged flow. Default only care tagged flow.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.25 |
cmFlowPointMcastRateLimitEnabledWhether multicast packets need be limited per FP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.26 |
cmFlowPointMcastRateLimitSpeedLoThe rate limiting for multicast packets per FP
When cmFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.27 |
cmFlowPointMcastRateLimitSpeedHiThe rate limiting for multicast packets per FP
When cmFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.28 |
cmFlowPointBcastRateLimitEnabledWhether broadcast packets need be limited per FP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.29 |
cmFlowPointBcastRateLimitSpeedLoThe rate limiting for broadcast packets per FP
When cmFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.30 |
cmFlowPointBcastRateLimitSpeedHiThe rate limiting for broadcast packets per FP
When cmFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.31 |
cmFlowPointSplitHorizonGroupOIDSpecifies the Split-Horizon Group EID. If there is no SHG, the value is none.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.32 |
cmFlowPointLoopAvoidanceEID of this associated Loop Avoidance protocol entity.
A value of NONE indicates there is no loop avoidance protocol.
Currently ERP EID is filled when ELAN service is created.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.33 |
cmFlowPointHierarchicalCosEnabledEnable or Disable Hierarchical COS shaping (flow shaping).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.34 |
cmFlowPointWfqQidThis attribute description the WFQ Qid.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.35 |
cmFlowPointWfqOutPriorityThis attribute description the WFQ out priority.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.36 |
cmFlowPointMaximumBWLoThis attribute description the flow point maximum bandwidth.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.37 |
cmFlowPointMaximumBWHiThis attribute description the flow point maximum bandwidth.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.38 |
cmFlowPointGuaranteedBWLoThis attribute description the flow point guaranteed bandwidth.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.39 |
cmFlowPointGuaranteedBWHiThis attribute description the flow point guaranteed bandwidth.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.40 |
cmFlowPointRefPrioMapProfileThis object allows to set priority map profile.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.41 |
cmFlowPointMcastAndBcastRateLimitEnabledWhether multicast packets and broadcast packets need be limited per FP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.29.1.42 |
cmFlowPointMcastAndBcastRateLimitSpeedLoThe rate limiting for multicast packets and broadcast packets per FP
When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.43 |
cmFlowPointMcastAndBcastRateLimitSpeedHiThe rate limiting for multicast packets and broadcast packets per FP
When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.29.1.44 |
cmOAMFlowPointTableA list of entries corresponding to OAMFlowPoint
for configuration purposes. SEQUENCE OF CmOAMFlowPointEntry .1.3.6.1.4.1.2544.1.12.4.1.30 |
cmOAMFlowPointEntryA conceptual row in the cmOAMFlowPointTable. These entries represent
an FlowPoint.
If the oam flowpoint attached to a lag, the slotIndex should
be 255(255 is used to identify the oam flowpoint belongs to lag),
and the cmEthernetTrafficPortIndex should be the f3LagIndex. CmOAMFlowPointEntry .1.3.6.1.4.1.2544.1.12.4.1.30.1 |
cmOAMFlowPointIndexThe integer index value corresponding to an OAMFlowPoint.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.30.1.1 |
cmOAMFlowPointCircuitNameThis object allows SNMP management entities to provide a
circuit identifier with the OAMFlowPoint.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.30.1.2 |
cmOAMFlowPointAdminStateThis object represents the Administrative State of the OAMFlowPoint.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.30.1.3 |
cmOAMFlowPointOperationalStateThis object represents the Operational State of the OAMFlowPoint.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.30.1.4 |
cmOAMFlowPointSecondaryStateThis object represents the Secondary State of the OAMFlowPoint.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.30.1.5 |
cmOAMFlowPointIngressVlanMemberListIt allows specification of VLAN members of the OAMFlowPoint.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* or X (vlan X with all priorities),
*-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities).
Members with specific VLAN Id and specific VLAN Priority are not supported.
Once the flowpoint is created, this attribute can only be updated
using cmOAMFlowPointVlanMemberAction and cmOAMFlowPointVlanMemberActionVlan objects.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.30.1.6 |
cmOAMFlowPointVlanMemberActionThis object allows to add or remove the VLAN members specified by
cmOAMFlowPointVlanMemberActionVlan object. SNMP manager must first
configure the VLAN member to be added/removed in the object
cmOAMFlowPointVlanMemberActionVlan and then should specify
cmOAMFlowPointVlanMemberAction on whether to add/remove the specified
VLAN member.rw FlowVlanActionType .1.3.6.1.4.1.2544.1.12.4.1.30.1.7 |
cmOAMFlowPointVlanMemberActionVlanThis object allows adding/removing VLAN members
to a oam flowpoint.
VLAN member is of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be of
the form X-* (vlan X with all priorities),
*-Y (all vlans with priority Y), and X1:X2
(range of vlans from X1 to X2, all priorities).
Members with specific VLAN Id and
specific VLAN Priority are not supported.
In order to add/remove VLAN member to a flow, user must
specify this object with appropriate VLAN and then invoke
cmOAMFlowPointVlanMemberAction.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.30.1.8 |
cmOAMFlowPointIngressUntaggedFrameSupportedThis object allows to specify whether or not the OAMFlowPoint
supports untagged frame.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.30.1.9 |
cmOAMFlowPointSESFramesLossThresholdRatioThis object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the oam flowpoint.
This functionality is applicable if the oam flowpoint is monitored
using the Y.1731 ESA functionality.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.30.1.10 |
cmOAMFlowPointStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.30.1.11 |
cmOAMFlowPointRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmOAMFlowPointRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmOAMFlowPointRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmOAMFlowPointRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.30.1.12 |
cmIngressPrioMapTableA list of entries corresponding to Ingress Priority Mapping
for configuration purposes. SEQUENCE OF CmIngressPrioMapEntry .1.3.6.1.4.1.2544.1.12.4.1.31 |
cmIngressPrioMapEntryA conceptual row in the cmIngressPrioMapTable. CmIngressPrioMapEntry .1.3.6.1.4.1.2544.1.12.4.1.31.1 |
cmIngressPrioMapIndexThe integer index value corresponding to a priority value
based on the cmEthernetTrafficPortPrioMapMode.
In case of TOS and 8021P, valid indices are 1 to 8,
in case of DSCP, valid indices are 1 to 64.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.31.1.1 |
cmIngressPrioMapInPriorityThe integer index value corresponding to a priority value
based on the cmEthernetTrafficPortIngressPrioMapMode.
In case of TOS and 8021P, valid indices are 0 to 7,
in case of DSCP, valid indices are 0 to 63.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.31.1.2 |
cmIngressPrioMapCOSThis allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.31.1.3 |
cmEgressPrioMapTableA list of entries corresponding to Egress Priority Mapping
for configuration purposes. SEQUENCE OF CmEgressPrioMapEntry .1.3.6.1.4.1.2544.1.12.4.1.32 |
cmEgressPrioMapEntryA conceptual row in the cmEgressPrioMapTable. CmEgressPrioMapEntry .1.3.6.1.4.1.2544.1.12.4.1.32.1 |
cmEgressCOSIndexThe integer index used to uniquely identify
this Egress Priority Map Entryro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.32.1.1 |
cmEgressCOSThis allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.32.1.2 |
cmEgressOuterTagCtrlThis object defines the behavior of the Priority portion of the frame transmit out.
If NONE is selected, the outgoing priority bits are left unchanged.
If SWAP is selected, the priority bits are changed by the value specified
in the Outer-Tag Priority parameter.rw PrioMapControlType .1.3.6.1.4.1.2544.1.12.4.1.32.1.3 |
cmEgressOuterTagPriorityThis object defines the new priority bits to be used,
it is available only if Outer-Tag PRIOCTL is set to SWAP.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.32.1.4 |
cmPortCpdProfileTableA list of entries corresponding to System
Control Protocol Disposition V3 profile. SEQUENCE OF CmPortCpdProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.33 |
cmPortCpdProfileEntryA conceptual row in the cmPortCpdProfileTable.
These entries represent a Control Protocol Disposition
of a port filtering criteria of the System. CmPortCpdProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.33.1 |
cmPortCpdProfileIndexUnique Index value to access the CPD profile row.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.33.1.1 |
cmPortCpdProfileNameThis object describes the alias of the cpd V3 profile entry.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.33.1.2 |
cmPortCpdProfileCiscoGroupDispTypeDeprecated - each Cisco protocol has its own disposition.
Control Protocol Disposition for Cisco Group. This includes
ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge,
L2PT. Note that a specific protocol filter overrides the
group setting.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.3 |
cmPortCpdProfileIslDispTypeControl Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.4 |
cmPortCpdProfilePagpDispTypeControl Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.5 |
cmPortCpdProfileUdldDispTypeControl Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.6 |
cmPortCpdProfileCdpDispTypeControl Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.7 |
cmPortCpdProfileVtpDispTypeControl Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.8 |
cmPortCpdProfileDtpDispTypeControl Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.9 |
cmPortCpdProfilePvstpPlusDispTypeControl Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.10 |
cmPortCpdProfileUplinkFastDispTypeControl Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.11 |
cmPortCpdProfileVlanBridgeDispTypeControl Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.12 |
cmPortCpdProfileL2PTDispTypeControl Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.13 |
cmPortCpdProfileBridgeGroupDispTypeDeprecated - individual dispositions available for each MAC.
Bridge Group Control Protocol Disposition Type. This
includes BPDU, PAUSE (IEEE 802.3x Flow Control),
LACP (Link Aggregation), LACP Marker (Marker),
EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication,
besides reserved MAC addresses from
01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.14 |
cmPortCpdProfileBPDUDispTypeControl Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.15 |
cmPortCpdProfilePauseDispTypeControl Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.16 |
cmPortCpdProfileLACPDispTypeControl Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.17 |
cmPortCpdProfileLACPMarkerDispTypeControl Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.18 |
cmPortCpdProfileEfmOamDispTypeControl Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.19 |
cmPortCpdProfileSSMDispTypeControl Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.20 |
cmPortCpdProfilePortAuthenDispTypeControl Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.21 |
cmPortCpdProfileBridgeReservedDispTypeDeprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.22 |
cmPortCpdProfileLANBridgesDispTypeControl Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.23 |
cmPortCpdProfileGARPGroupDispTypeDeprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.24 |
cmPortCpdProfileGMRPDispTypeControl Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.25 |
cmPortCpdProfileGVRPDispTypeControl Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:22).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.26 |
cmPortCpdProfileGARPDispTypeGroup Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.27 |
cmPortCpdProfileLldpDispTypeDeprecated - each LLDP MAC protocol has its own disposition.
Control Protocol Disposition for LLDP.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.28 |
cmPortCpdProfileStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.33.1.29 |
cmPortCpdProfileRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmCpdProfileRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmCpdProfileRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmCpdProfileRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.33.1.30 |
cmPortCpdProfileMac00DispTypeMAC Address 01:80:C2:00:00:00 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.31 |
cmPortCpdProfileMac01DispTypeMAC Address 01:80:C2:00:00:01 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.32 |
cmPortCpdProfileMac02DispTypeMAC Address 01:80:C2:00:00:02 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.33 |
cmPortCpdProfileMac03DispTypeMAC Address 01:80:C2:00:00:03 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.34 |
cmPortCpdProfileMac04DispTypeMAC Address 01:80:C2:00:00:04 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.35 |
cmPortCpdProfileMac05DispTypeMAC Address 01:80:C2:00:00:05 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.36 |
cmPortCpdProfileMac06DispTypeMAC Address 01:80:C2:00:00:06 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.37 |
cmPortCpdProfileMac07DispTypeMAC Address 01:80:C2:00:00:07 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.38 |
cmPortCpdProfileMac08DispTypeMAC Address 01:80:C2:00:00:08 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.39 |
cmPortCpdProfileMac09DispTypeMAC Address 01:80:C2:00:00:09 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.40 |
cmPortCpdProfileMac0ADispTypeMAC Address 01:80:C2:00:00:0A Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.41 |
cmPortCpdProfileMac0BDispTypeMAC Address 01:80:C2:00:00:0B Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.42 |
cmPortCpdProfileMac0CDispTypeMAC Address 01:80:C2:00:00:0C Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.43 |
cmPortCpdProfileMac0DDispTypeMAC Address 01:80:C2:00:00:0D Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.44 |
cmPortCpdProfileMac0EDispTypeMAC Address 01:80:C2:00:00:0E Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.45 |
cmPortCpdProfileMac0FDispTypeMAC Address 01:80:C2:00:00:0F Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.46 |
cmPortCpdProfileNearestLLDPDispTypeThe nearest lldp Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.47 |
cmPortCpdProfileNonTpmrLLDPDispTypeThe non tp mr lldp Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.48 |
cmPortCpdProfileCustomerLLDPDispTypeThe customer lldp Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.49 |
cmPortCpdProfileELMIDispTypeThe ELMI Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.33.1.50 |
cmFlowPointCpdProfileTableA list of entries corresponding to System
Control Protocol Disposition V3 profile. SEQUENCE OF CmFlowPointCpdProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.34 |
cmFlowPointCpdProfileEntryA conceptual row in the cmFlowPointCpdProfileTable.
These entries represent a Control Protocol Disposition
of a flow point filtering criteria of the System. CmFlowPointCpdProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.34.1 |
cmFlowPointCpdProfileIndexUnique Index value to access the CPD profile row.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.34.1.1 |
cmFlowPointCpdProfileNameThis object describes the alias of the cpd V3 profile entry.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.34.1.2 |
cmFlowPointCpdProfileCiscoGroupDispTypeDeprecated - each Cisco protocol has its own disposition.
Control Protocol Disposition for Cisco Group. This includes
ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge,
L2PT. Note that a specific protocol filter overrides the
group setting.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.3 |
cmFlowPointCpdProfileIslDispTypeControl Protocol Disposition for ISL (Inter Switch Link).
MAC Address (01:00:0C:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.4 |
cmFlowPointCpdProfilePagpDispTypeControl Protocol Disposition for PAGP (Port Aggregation Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.5 |
cmFlowPointCpdProfileUdldDispTypeControl Protocol Disposition for UDLD (Unidirectional Link Detection).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.6 |
cmFlowPointCpdProfileCdpDispTypeControl Protocol Disposition for CDP (Cisco Discovery Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.7 |
cmFlowPointCpdProfileVtpDispTypeControl Protocol Disposition for VTP (VLAN Trunking Protocol).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.8 |
cmFlowPointCpdProfileDtpDispTypeControl Protocol Disposition for DTP (Dynamic Trunking).
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.9 |
cmFlowPointCpdProfilePvstpPlusDispTypeControl Protocol Disposition for Spanning Tree PVSTP+.
MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.10 |
cmFlowPointCpdProfileUplinkFastDispTypeControl Protocol Disposition for STP UplinkFast.
MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.11 |
cmFlowPointCpdProfileVlanBridgeDispTypeControl Protocol Disposition for VLAN Bridge.
MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.12 |
cmFlowPointCpdProfileL2PTDispTypeControl Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT).
MAC Address (01:00:0C:CD:CD:D0).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.13 |
cmFlowPointCpdProfileBridgeGroupDispTypeDeprecated - individual dispositions available for each MAC.
Bridge Group Control Protocol Disposition Type. This
includes BPDU, PAUSE (IEEE 802.3x Flow Control),
LACP (Link Aggregation), LACP Marker (Marker),
EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication,
besides reserved MAC addresses from
01:80:C2:00:00:04 thru 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.14 |
cmFlowPointCpdProfileBPDUDispTypeControl Protocol Disposition for IEEE Spanning Tree(STP),
MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of
Spanning Tree). MAC Address (01:80:C2:00:00:00).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.15 |
cmFlowPointCpdProfilePauseDispTypeControl Protocol Disposition for IEEE 802.3x Flow Control
(PAUSE frames).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.16 |
cmFlowPointCpdProfileLACPDispTypeControl Protocol Disposition for 802.3ad Link Aggregation
Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.17 |
cmFlowPointCpdProfileLACPMarkerDispTypeControl Protocol Disposition for IEEE 802.3ad Marker Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.18 |
cmFlowPointCpdProfileEfmOamDispTypeControl Protocol Disposition for IEEE 802.3ah EFM OAM.
MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.19 |
cmFlowPointCpdProfileSSMDispTypeControl Protocol Disposition for Sync Status Messages.
MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.20 |
cmFlowPointCpdProfilePortAuthenDispTypeControl Protocol Disposition for IEEE 802.1x Protocol.
MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.21 |
cmFlowPointCpdProfileBridgeReservedDispTypeDeprecated - individual dispositions available for each MAC.
Control Protocol Disposition for Range of MAC Addresses
from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.22 |
cmFlowPointCpdProfileLANBridgesDispTypeControl Protocol Disposition for IEEE 802.1d LAN Bridge Managment.
MAC Address (01:80:C2:00:00:10).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.23 |
cmFlowPointCpdProfileGARPGroupDispTypeDeprecated - each GARP Group protocol has its own disposition.
Group Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.24 |
cmFlowPointCpdProfileGMRPDispTypeControl Protocol Disposition for GARP Multicast Registration
Protocol. MAC Address (01:80:C2:00:00:20).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.25 |
cmFlowPointCpdProfileGVRPDispTypeControl Protocol Disposition for GARP VLAN Registration
Protocol. MAC Address (01:80:C2:00:00:22).rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.26 |
cmFlowPointCpdProfileGARPDispTypeGroup Disposition type which includes GMRP, GVRP and
MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.27 |
cmFlowPointCpdProfileLldpDispTypeDeprecated - each LLDP MAC protocol has its own disposition.
Control Protocol Disposition for LLDP.rwdeprecated CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.28 |
cmFlowPointCpdProfileStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.34.1.29 |
cmFlowPointCpdProfileRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmCpdProfileRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmCpdProfileRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmCpdProfileRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.34.1.30 |
cmFlowPointCpdProfileMac00DispTypeMAC Address 01:80:C2:00:00:00 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.31 |
cmFlowPointCpdProfileMac01DispTypeMAC Address 01:80:C2:00:00:01 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.32 |
cmFlowPointCpdProfileMac02DispTypeMAC Address 01:80:C2:00:00:02 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.33 |
cmFlowPointCpdProfileMac03DispTypeMAC Address 01:80:C2:00:00:03 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.34 |
cmFlowPointCpdProfileMac04DispTypeMAC Address 01:80:C2:00:00:04 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.35 |
cmFlowPointCpdProfileMac05DispTypeMAC Address 01:80:C2:00:00:05 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.36 |
cmFlowPointCpdProfileMac06DispTypeMAC Address 01:80:C2:00:00:06 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.37 |
cmFlowPointCpdProfileMac07DispTypeMAC Address 01:80:C2:00:00:07 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.38 |
cmFlowPointCpdProfileMac08DispTypeMAC Address 01:80:C2:00:00:08 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.39 |
cmFlowPointCpdProfileMac09DispTypeMAC Address 01:80:C2:00:00:09 Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.40 |
cmFlowPointCpdProfileMac0ADispTypeMAC Address 01:80:C2:00:00:0A Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.41 |
cmFlowPointCpdProfileMac0BDispTypeMAC Address 01:80:C2:00:00:0B Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.42 |
cmFlowPointCpdProfileMac0CDispTypeMAC Address 01:80:C2:00:00:0C Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.43 |
cmFlowPointCpdProfileMac0DDispTypeMAC Address 01:80:C2:00:00:0D Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.44 |
cmFlowPointCpdProfileMac0EDispTypeMAC Address 01:80:C2:00:00:0E Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.45 |
cmFlowPointCpdProfileMac0FDispTypeMAC Address 01:80:C2:00:00:0F Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.46 |
cmFlowPointCpdProfileNearestLLDPDispTypeThe nearest lldp Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.47 |
cmFlowPointCpdProfileNonTpmrLLDPDispTypeThe non tp mr lldp Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.48 |
cmFlowPointCpdProfileCustomerLLDPDispTypeThe customer lldp Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.49 |
cmFlowPointCpdProfileELMIDispTypeThe ELMI Disposition type.rw CmControlProtocolDispType .1.3.6.1.4.1.2544.1.12.4.1.34.1.50 |
cmEthernetTrafficPortCpdTableA list of entries corresponding to Ethernet Port
CPD for configuration purposes. SEQUENCE OF CmEthernetTrafficPortCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.35 |
cmEthernetTrafficPortCpdEntryA conceptual row in the cmEthernetTrafficPortCpdTable. CmEthernetTrafficPortCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.35.1 |
cmEthernetTrafficPortCpdIndexAn arbitrary integer index value used to uniquely identify this CPD Service Entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.35.1.1 |
cmEthernetTrafficPortAssociatedCpdProfileAn integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.35.1.2 |
cmEthernetFlowPointCpdTableA list of entries corresponding to Ethernet Flow Point
CPD for configuration purposes. SEQUENCE OF CmEthernetFlowPointCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.36 |
cmEthernetFlowPointCpdEntryA conceptual row in the cmEthernetFlowPointCpdTable. CmEthernetFlowPointCpdEntry .1.3.6.1.4.1.2544.1.12.4.1.36.1 |
cmEthernetFlowPointCpdIndexAn arbitrary integer index value used to uniquely identify this CPD Service Entry.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.36.1.1 |
cmEthernetFlowPointAssociatedCpdProfileAn integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.36.1.2 |
cmTrafficAclProfileTableA list of entries corresponding to the Traffic Profile Rules Entry.
It provides upto 4000 Traffic ACL Rules to be configured. SEQUENCE OF CmTrafficAclProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.37 |
cmTrafficAclProfileEntryAn entry containing information applicable to a system ACL Profile that can be configured. CmTrafficAclProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.37.1 |
cmTrafficAclProfileIndexAn arbitrary integer index value used to uniquely identify
Traffic ACL profile entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.37.1.1 |
cmTrafficAclProfileNameThis object describes the alias of the Acl profile entry.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.37.1.2 |
cmTrafficAclProfileStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.37.1.3 |
cmTrafficAclProfileRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmTrafficAclProfileRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmTrafficAclProfileRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmTrafficAclProfileRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.37.1.4 |
cmTrafficAclRulesTableA list of entries corresponding to the Traffic ACL Rules Entry. SEQUENCE OF CmTrafficAclRulesEntry .1.3.6.1.4.1.2544.1.12.4.1.38 |
cmTrafficAclRulesEntryAn entry containing information applicable to a system ACL Rules that can be configured. CmTrafficAclRulesEntry .1.3.6.1.4.1.2544.1.12.4.1.38.1 |
cmTrafficAclRulesIndexAn arbitrary integer index value used to uniquely identify
Traffic ACL profile entry. The manager may not assume any
particular semantics or meaning to this index, except that
it identifies a logical row in the table.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.38.1.1 |
cmTrafficAclFilterActionCurrently, 'permit' and 'deny' are supported.rw CmTrafficAclFilterActionType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.38.1.2 |
cmTrafficAclFilterTypeThis object describes the Acl filter type.rw CmTrafficAclFilterType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.38.1.3 |
cmTrafficAclEnabledThis object enables/disables the Acl entity.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.4 |
cmTrafficAclSrcMacAddrThe source mac address of Acl entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.5 |
cmTrafficAclSrcMacAddrEnabledThis object enables/disables source MAC address of Acl entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.6 |
cmTrafficAclDstMacAddrThe destination MAC address of Acl entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.7 |
cmTrafficAclDstMacAddrEnabledThis object enables/disables destination MAC address of Acl entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.8 |
cmTrafficAclSrcIpFilterEnabledThis object enable/disable Source IPV4 or IPV6 address filter criteria.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.9 |
cmTrafficAclDstIpFilterEnabledThis object enable/disable Destination IPV4 or IPV6 address filter criteria.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.10 |
cmTrafficAclSrcIpV4AddrThe source IP address of Acl entry.rw IpAddress .1.3.6.1.4.1.2544.1.12.4.1.38.1.11 |
cmTrafficAclSrcIpV4AddrMaskThe source IP mask of Acl entry.rw IpAddress .1.3.6.1.4.1.2544.1.12.4.1.38.1.12 |
cmTrafficAclDstIpV4AddrThe destination IP address of Acl entry.rw IpAddress .1.3.6.1.4.1.2544.1.12.4.1.38.1.13 |
cmTrafficAclDstIpV4AddrMaskThe destination IP mask of Acl entry.rw IpAddress .1.3.6.1.4.1.2544.1.12.4.1.38.1.14 |
cmTrafficAclSrcIpV6AddrThe source IPV6 address of Acl entry.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.15 |
cmTrafficAclSrcIpV6AddrMaskThe source IPV6 mask of Acl entry.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.16 |
cmTrafficAclDstIpV6AddrThe destination IPV6 address of Acl entry.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.17 |
cmTrafficAclDstIpV6AddrMaskThe destination IPV6 mask of Acl entry.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.18 |
cmTrafficAclTcpUdpSrcPortNumThis object describes TCP/UDP minimum source port number of Acl entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.38.1.19 |
cmTrafficAclTcpUdpSrcPortMaskThis object describes TCP/UDP maximum source port number of Acl entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.38.1.20 |
cmTrafficAclTcpUdpSrcPortEnabledThis object enables/disables TCP/UDP source port of Acl entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.21 |
cmTrafficAclTcpUdpDstPortNumThis object describes TCP/UDP minimum destination port number of Acl entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.38.1.22 |
cmTrafficAclTcpUdpDstPortMaskThis object describes TCP/UDP maximum destination port number of Acl entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.38.1.23 |
cmTrafficAclTcpUdpDstPortEnabledThis object enables/disables TCP/UDP destination port of Acl entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.24 |
cmTrafficAclIpQosTypeThis object describes QosType Acl entry.rw CmTrafficACLPriorityType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.38.1.25 |
cmTrafficAclIpQosValueThis object describes QOS value of Acl entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.38.1.26 |
cmTrafficAclIpQosTypeEnabledThis object enables/disables qos type of acl entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.27 |
cmTrafficAclVlanIdThis object describes the vlan Id of Acl entry.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.38.1.28 |
cmTrafficAclVlanIdEnabledThis object enables/disables Vlan Id of Acl entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.29 |
cmTrafficAclVlanPriorityThis object describes the Vlan Priority of Acl entry.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.38.1.30 |
cmTrafficAclVlanPriorityEnabledThis object enables/disables Vlan Priority of Acl entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.31 |
cmTrafficAclProtocolTypeThis object describes protocol type of Acl entry.rw CmTrafficAclProtocolType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.38.1.32 |
cmTrafficAclProtocolTypeEnabledThis object enables/disables protocol type of Acl entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.33 |
cmTrafficAclStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.34 |
cmTrafficAclRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmTrafficAclRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmTrafficAclRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmTrafficAclRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.38.1.35 |
cmQosPolicerProfileTableA list of entries corresponding to Quality of Service
Policer for configuration purposes. SEQUENCE OF CmQosPolicerProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.39 |
cmQosPolicerProfileEntryA conceptual row in the cmQosPolicerProfileTable.
These entries represent a Quality of Service Policer. CmQosPolicerProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.39.1 |
cmQosPolicerProfileIndexThis object defines the Policer profile ID. Up to 1000 profiles can be specified per system.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.39.1.1 |
cmQosPolicerProfileNameThis object defines the alias for this profilerw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.39.1.2 |
cmQosPolicerProfileCIRLoThis object allows specification of the Commited Information
Rate(CIR) on Policer Profile. This represents the lower 32 bits of the
CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.39.1.3 |
cmQosPolicerProfileCIRHiThis object allows specification of the Commited Information
Rate(CIR) on Policer Profile. This represents the upper 32 bits of the
CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.39.1.4 |
cmQosPolicerProfileEIRLoThis object allows specification of the Excess Information
Rate(EIR) on the Policer Profile. This represents the lower 32 bits
of the EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.39.1.5 |
cmQosPolicerProfileEIRHiThis object allows specification of the Excess Information
Rate(EIR) on the Policer Profile. This represents the upper 32 bits
of the EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.39.1.6 |
cmQosPolicerProfileCBSThis object allows specification of the Commited Burst Size
(CBS) on Policer Profile.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.39.1.7 |
cmQosPolicerProfileEBSThis object allows specification of the Excess Burst Size
(EBS) on the Policer Profile.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.39.1.8 |
cmQosPolicerProfileColorModeThis object allows specification of Policer Color Mode as
'color-aware' or 'color-blind'.rw PolicerColorMode .1.3.6.1.4.1.2544.1.12.4.1.39.1.9 |
cmQosPolicerProfileCouplingFlagThis object allows specification of Policer Coupling Flag.
When coupling is enabled, tokens that would normally be
added to the C-bucket are passed to the E-bucket only once the CIR
bucket has reached its CBS level. Therefore under this condition
the E-bucket is being filled at the rate of CIR + EIR.
Normally the long term average of frames declared yellow, which is
bounded by the EIR. Coupling is a function to allow the
long term average of frames declared yellow to be bounded by
CIR + EIR. This allows a higher volume of yellow frames
to be delivered/received if the arrival of green marked frames
is low. Tokens from the E-bucket do NOT get passed to the
C-bucket once the EBS level has been reached.
Enabling coupling in combination with a provisioned EIR of 0
allows for a single rate three color marking (srTCM) algorithm
to be established. In this situation the E-bucket is filled at the
CIR rate in the case the C-bucket is filled to its CBS level.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.39.1.10 |
cmQosPolicerProfileStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.39.1.11 |
cmQosPolicerProfileRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmQosPolicerProfileRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmQosPolicerProfileRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmQosPolicerProfileRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.39.1.12 |
cmQosQueueProfileTableA list of entries corresponding to Quality of Service
Queue for configuration purposes. SEQUENCE OF CmQosQueueProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.40 |
cmQosQueueProfileEntryA conceptual row in the cmQosQueueProfileTable.
These entries represent a Quality of Service Queue. CmQosQueueProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.40.1 |
cmQosQueueProfileIndexThis object defines the Queue profile ID. Up to 64 profiles can be specified per system.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.40.1.1 |
cmQosQueueProfileNameThis object defines the alias for this profilerw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.40.1.2 |
cmQosQueueProfileBufferSizeThis object defines the buffer size of the selected queues.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.40.1.3 |
cmQosQueueProfileREDEnabledThis object defines whether the WRED is enabled as congestion algorithm or not.
If disabled, then the following RED parameters (cmQueueProfileWREDDp0MinTh,
cmQueueProfileWREDDp0MaxTh and cmQueueProfileWREDDp0MaxProb) must not be specified.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.40.1.4 |
cmQosQueueProfileStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.40.1.5 |
cmQosQueueProfileRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmQosQueueProfileRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmQosQueueProfileRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmQosQueueProfileRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.40.1.6 |
cmQosPolicerV2TableA list of entries corresponding to Quality of Service
Policer for configuration purposes. SEQUENCE OF CmQosPolicerV2Entry .1.3.6.1.4.1.2544.1.12.4.1.41 |
cmQosPolicerV2EntryA conceptual row in the cmQosPolicerV2Table.
These entries represent a Quality of Service Policer. CmQosPolicerV2Entry .1.3.6.1.4.1.2544.1.12.4.1.41.1 |
cmQosPolicerV2IndexThe Policer Index that represents the COS level. Index 1
represents COS 0; Index 2 represents COS 1 and so on.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.41.1.1 |
cmQosPolicerV2AdminStateThis object represents the Administrative State of
the QOS Policer.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.41.1.2 |
cmQosPolicerV2OperationalStateThis object represents the Operational State of the QOS Policer.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.41.1.3 |
cmQosPolicerV2SecondaryStateThis object represents the Secondary State of the QOS Policer.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.41.1.4 |
cmQosPolicerV2ColorMarkingEnabledThis object indicates the colorMarking state of the QOS Policer.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.41.1.5 |
cmQosPolicerV2AssociatedProfileThis object define the queue profile ID to be used,
it is associated with the cmQosPolicerProfileIndex.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.41.1.6 |
cmQosPolicerV2StorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.41.1.7 |
cmQosPolicerV2RowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmQosPolicerV2RowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmQosPolicerV2RowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmQosPolicerV2RowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.41.1.8 |
cmQosPolicerV2PolicingEnabledWhether enable or disable the functionality of policing for this COS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.41.1.9 |
cmQosShaperV2TableA list of entries corresponding to Quality of Service
ShaperV2 for configuration purposes. SEQUENCE OF CmQosShaperV2Entry .1.3.6.1.4.1.2544.1.12.4.1.42 |
cmQosShaperV2EntryA conceptual row in the cmQosShaperV2Table.
These entries represent a Quality of Service Shaper. CmQosShaperV2Entry .1.3.6.1.4.1.2544.1.12.4.1.42.1 |
cmQosShaperV2IndexThe ShaperV2 Index that represents the COS level. Index 1
represents COS 0; Index 2 represents COS 1 and so on.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.1 |
cmQosShaperV2AdminStateThis object represents the Administrative State of
the QOS Shaper.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.42.1.2 |
cmQosShaperV2OperationalStateThis object represents the Operational State of the QOS ShaperV2.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.42.1.3 |
cmQosShaperV2SecondaryStateThis object represents the Secondary State of the QOS QosShaperV2.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.42.1.4 |
cmQosShaperV2AssociatedQueueProfileThis object defines the queue profile ID to be used,
it is associated with the cmQosQueueProfileIndex.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.42.1.5 |
cmQosShaperV2CIRLoThis object specifies the Lower 32 bits of CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.6 |
cmQosShaperV2CIRHiThis object specifies the Higher 32 bits of CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.7 |
cmQosShaperV2EIRLoThis object specifies the Lower 32 bits of EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.8 |
cmQosShaperV2EIRHiThis object specifies the Higher 32 bits of EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.9 |
cmQosShaperV2IngressAverageFrameSizeThis object defines the average frame size for accounting for Meter/Shaping.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.10 |
cmQosShaperV2StorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.42.1.11 |
cmQosShaperV2RowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmQosShaperV2RowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmQosShaperV2RowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmQosShaperV2RowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.42.1.12 |
cmQosShaperV2AdditionalCIRLoThis object specifies the Lower 32 bits of additional CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.13 |
cmQosShaperV2AdditionalCIRHiThis object specifies the Higher 32 bits of additional CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.14 |
cmQosShaperV2WFQWeightWeight of queue to be scheduled by WFQ mechanism.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.42.1.15 |
cmQosShaperV2ActualCIRThis object specifies the actual CIR.ro Counter64 .1.3.6.1.4.1.2544.1.12.4.1.42.1.16 |
cmQosShaperV2ActualEIRThis object specifies the actual EIR.ro Counter64 .1.3.6.1.4.1.2544.1.12.4.1.42.1.17 |
cmQosShaperV2LowLatencyControlThis object specifies low latency control whether enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.42.1.18 |
cmTrafficPortQosShaperTableA list of entries corresponding to Quality of Service
Shaper for configuration purposes. SEQUENCE OF CmTrafficPortQosShaperEntry .1.3.6.1.4.1.2544.1.12.4.1.43 |
cmTrafficPortQosShaperEntryA conceptual row in the cmTrafficPortQosShaperTable.
These entries represent a Quality of Service Shaper. CmTrafficPortQosShaperEntry .1.3.6.1.4.1.2544.1.12.4.1.43.1 |
cmTrafficPortQosShaperIndexThe ShaperV2 Index that represents the COS level. Index 1
represents COS 0; Index 2 represents COS 1 and so on.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.1 |
cmTrafficPortQosShaperAdminStateThis object represents the Administrative State of
the QOS Shaper.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.43.1.2 |
cmTrafficPortQosShaperOperationalStateThis object represents the Operational State of the QOS ShaperV2.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.43.1.3 |
cmTrafficPortQosShaperSecondaryStateThis object represents the Secondary State of the QOS LagQosShaper.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.43.1.4 |
cmTrafficPortQosShaperAssociatedQueueProfileThis object defines the queue profile ID to be used,
it is associated with the cmQosQueueProfileIndex.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.43.1.5 |
cmTrafficPortQosShaperBufferSizeThis object defines the buffer size of Shaper.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.6 |
cmTrafficPortQosShaperCIRLoThis object specifies the Lower 32 bits of CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.7 |
cmTrafficPortQosShaperCIRHiThis object specifies the Higher 32 bits of CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.8 |
cmTrafficPortQosShaperEIRLoThis object specifies the Lower 32 bits of EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.9 |
cmTrafficPortQosShaperEIRHiThis object specifies the Higher 32 bits of EIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.10 |
cmTrafficPortQosShaperStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.43.1.11 |
cmTrafficPortQosShaperRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmTrafficPortQosShaperRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmTrafficPortQosShaperRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmTrafficPortQosShaperRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.43.1.12 |
cmTrafficPortQosShaperIngressAverageFrameSizeThis object defines the average frame size for accounting for Meter/Shaping.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.13 |
cmTrafficPortQosShaperAdditionalCIRLoThis object specifies the Lower 32 bits of additional CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.14 |
cmTrafficPortQosShaperAdditionalCIRHiThis object specifies the Higher 32 bits of additional CIR.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.43.1.15 |
cmTrafficAclRscAllocationThis object is defined to set traffic acl resource allocation.
Supported actions are:
all-bk-l2(1) - all bank allocated to l2.
all-bk-l2-ipv4(2) - all bank allocated to l2/ipv4.
two-bk-l2-ipv4(3) - two thirds allocated to l2/ipv4, the left belongs to ipv6.
one-bk-l2-ipv4(4) - one thirds allocated to l2/ipv4, the left belongs to ipv6.
none-bk-l2-ipv4(5) - all bank allocated to ipv6.rw CmAclConfiguration .1.3.6.1.4.1.2544.1.12.4.1.44 |
f3NetPortQosShaperTableA list of entries corresponding to Ethernet Network Port
Quality of Service Shaper for configuration purposes.
These shapers can be managed when the Network Port is
in evpl mode and are relevant for traffic in the
access to network direction. SEQUENCE OF F3NetPortQosShaperEntry .1.3.6.1.4.1.2544.1.12.4.1.45 |
f3NetPortQosShaperEntryA conceptual row in the f3NetPortQosShaperTable.
These entries represent a Quality of Service Shaper. F3NetPortQosShaperEntry .1.3.6.1.4.1.2544.1.12.4.1.45.1 |
f3NetPortQosShaperIndexThe unique integer index value corresponding to a
Quality of Service Shaper.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.1 |
f3NetPortQosShaperDirectionThe direction of the Quality of Service Shaper.ro TrafficDirection (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.45.1.2 |
f3NetPortQosShaperAdminStateThis object represents the Administrative State of
the QOS Shaper.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.45.1.3 |
f3NetPortQosShaperOperationalStateThis object represents the Operational State of the QOS Shaper.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.45.1.4 |
f3NetPortQosShaperSecondaryStateThis object represents the Secondary State of the QOS Shaper.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.45.1.5 |
f3NetPortQosShaperCIRLoThis object represents the Commited Information
Rate(CIR) (Lower 32 bits)of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.6 |
f3NetPortQosShaperCIRHiThis object represents the Commited Information
Rate(CIR) (Higher 32 bits) of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.7 |
f3NetPortQosShaperEIRLoThis object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.8 |
f3NetPortQosShaperEIRHiThis object represents the Excess Information
Rate(EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.9 |
f3NetPortQosShaperCBSThis object represents the Commited Burst Size (CBS) of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.10 |
f3NetPortQosShaperEBSThis object represents the Excess Burst Size (EBS) of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.11 |
f3NetPortQosShaperBufferSizeThis object represents the Buffer Size of the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.12 |
f3NetPortQosShaperCOSThis object provides the COS (Class of Service)
value for the QOS Shaper.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.13 |
f3NetPortQosShaperSoamCIRLoThis object represents the Soam Commited Information
Rate(SOAM-CIR) (Lower 32 bits)of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.14 |
f3NetPortQosShaperSoamCIRHiThis object represents the Soam Commited Information
Rate(SOAM-CIR) (Higher 32 bits) of a Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.15 |
f3NetPortQosShaperSoamEIRLoThis object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.16 |
f3NetPortQosShaperSoamEIRHiThis object represents the Soam Excess Information
Rate(SOAM-EIR) (Higher 32 bits) on the Shaper.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.17 |
f3NetPortQosShaperWredGreenMinQueueThresholdThis object represents the Wred green packet min queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.18 |
f3NetPortQosShaperWredGreenMaxQueueThresholdThis object represents the Wred green packet max queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.19 |
f3NetPortQosShaperWredGreenDropProbabilityThis object represents the Wred green packet drop probability.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.20 |
f3NetPortQosShaperWredYellowMinQueueThresholdThis object represents the Wred yellow packet min queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.21 |
f3NetPortQosShaperWredYellowMaxQueueThresholdThis object represents the Wred yellow packet max queue threshold value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.22 |
f3NetPortQosShaperWredYellowDropProbabilityThis object represents the Wred yellow packet drop probability.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.45.1.23 |
f3Usb3GDCNPortTable3G DCN Port table.
The table contains parameters of 3G USB modem. SEQUENCE OF F3Usb3GDCNPortEntry .1.3.6.1.4.1.2544.1.12.4.1.46 |
f3Usb3GDCNPortEntryA conceptual row in the f3Usb3GDCNPortTable. F3Usb3GDCNPortEntry .1.3.6.1.4.1.2544.1.12.4.1.46.1 |
f3Usb3GDCNPortIndexAn integer index value used to uniquely identify
this Ethernet Access Port within a card.
Note that each Ethernet Access Port is uniquely identified
by the indices neIndex, shelfIndex,
slotIndex, f3Usb3GDCNPortIndexro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.46.1.1 |
f3Usb3GDCNPortIfIndexThis object has the same value as ifIndex for
G3 DCN Port. An integer index value used to
uniquely identify this G3 DCN Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.46.1.2 |
f3Usb3GDCNPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.46.1.3 |
f3Usb3GDCNPortAdminStateThis object represents the Administrative State of the G3 DCN Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.46.1.4 |
f3Usb3GDCNPortOperationalStateThis object represents the Operational State of the G3 DCN Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.46.1.5 |
f3Usb3GDCNPortSecondaryStateThis object represents the Secondary State of the G3 DCN Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.46.1.6 |
f3Usb3GDCNPortVendorNameThis object provides the Vendor Name of the G3 DCN Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.7 |
f3Usb3GDCNPortModelThis object provides the Model of the G3 DCN Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.8 |
f3Usb3GDCNPortFSNThis object provides the Factory Serial Number of the G3 DCN Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.9 |
f3Usb3GDCNPortIMEIThis object provides the International Mobile Equipment Identity of the G3 DCN Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.10 |
f3Usb3GDCNPortHardwareVersionThis object provides the Hardware Version of the G3 DCN Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.11 |
f3Usb3GDCNPortFirmwareVersionThis object provides the Firmware Version of the G3 DCN Port..ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.12 |
f3Usb3GDCNPortSIMStatusThis object provides the SIM card Status of the G3 DCN Port.ro F3Usb3GSimCardState .1.3.6.1.4.1.2544.1.12.4.1.46.1.13 |
f3Usb3GDCNPortPINLeftChancesThis object provides the Left Chances for PIN input of the G3 DCN Port.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.46.1.14 |
f3Usb3GDCNPortPUKLeftChancesThis object provides the Left Chances for PUK input of the G3 DCN Port.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.46.1.15 |
f3Usb3GDCNPortConnectionStatusThis object provides the Wirless Connection Status of the G3 DCN Port.ro F3Usb3GNetworkConnectionState .1.3.6.1.4.1.2544.1.12.4.1.46.1.16 |
f3Usb3GDCNPortRSSIThis object provides the Received Signal Strength Indication of the G3 DCN Port.ro F3Usb3GRecvSignalStrengthInd .1.3.6.1.4.1.2544.1.12.4.1.46.1.17 |
f3Usb3GDCNPortSpeedThis object provides the Connection Speed of the G3 DCN Port.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.46.1.18 |
f3Usb3GDCNPortMTUThis object provides the MTU of the G3 DCN Port.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.46.1.19 |
f3Usb3GDCNPortProviderNameThis object provides the Wireless Service Provider Name of the G3 DCN Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.20 |
f3Usb3GDCNPortDNS1This first DNS of the interface.ro IpAddress .1.3.6.1.4.1.2544.1.12.4.1.46.1.21 |
f3Usb3GDCNPortDNS2This second DNS of the interface.ro IpAddress .1.3.6.1.4.1.2544.1.12.4.1.46.1.22 |
f3Usb3GDCNPortAPNThis object allows configure the Access Point Name of the G3 DCN Port.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.46.1.23 |
f3Usb3GDCNPortUserNameThis object allows configure the User Name of the G3 DCN Port.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.46.1.24 |
f3Usb3GDCNPortPasswordThis object allows configure the Password of the G3 DCN Port.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.46.1.25 |
f3Usb3GDCNPortDailNumberThis object allows configure the Dail Number of the G3 DCN Port.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.46.1.26 |
f3Usb3GDCNPortRedialTimerThis object allows configure the Retail Timer of the G3 DCN Port.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.46.1.27 |
f3Usb3GDCNPortCurrentPinCodeThis object is the Current Pin Code.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.46.1.28 |
f3Usb3GDCNPortNewPinCodeThis object is the New Pin code.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.46.1.29 |
f3Usb3GDCNPortConfirmPinCodeThis object is the Confirm Pin Code.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.46.1.30 |
f3Usb3GDCNPortCurrentPukCodeThis object is the Current Puk Code.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.46.1.31 |
f3Usb3GDCNPINCodeActionThis Action is for PIN code operation.rw F3Usb3GDCNPINCodeActionType .1.3.6.1.4.1.2544.1.12.4.1.46.1.32 |
f3Usb3GDCNPortStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.33 |
f3Usb3GDCNPortRowStatusThe status of this row.
The f3Usb3GDCNPortRowStatus object may be modified if
the associated instance of this object is equal to active(1),
notInService(2), or notReady(3).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.34 |
f3Usb3GDCNPortIMSIThis object provides the International Mobile Subscriber Identity of the G3 DCN Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.46.1.35 |
f3Usb3GDCNPortPINStatusThis status of PIN/PUKro G3AuthStatus .1.3.6.1.4.1.2544.1.12.4.1.46.1.36 |
f3UsbDCNPortMobileNetworkTypeThis object describe the mobile network type.ro UsbDCNMobileNetworkType .1.3.6.1.4.1.2544.1.12.4.1.46.1.37 |
ocnStmTableA list of entries corresponding to OCn/STM interface. SEQUENCE OF OcnStmEntry .1.3.6.1.4.1.2544.1.12.4.1.47 |
ocnStmEntryA conceptual row in the ocnStmTable. OcnStmEntry .1.3.6.1.4.1.2544.1.12.4.1.47.1 |
ocnStmIndexUnique index value associated with the OCn/STM interface. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.47.1.1 |
ocnStmIfIndexThis object has the same value as ifIndex for OCn/STM interface.
An integer index value used to uniquely identify
this OCn/STM interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.2 |
ocnStmEntityIndexEntity Index from ENTITY-MIB for this OCn/STM interface.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.3 |
ocnStmAdminStateThis object represents the Administrative State of the OCn/STM interface.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.4 |
ocnStmOperationalStateThis object represents the Operational State of the OCn/STM interface.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.5 |
ocnStmSecondaryStateThis object represents the Secondary State of the OCn/STM interface.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.6 |
ocnStmSfpVendorNameThis object provides the vendor name of the SFP.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.47.1.7 |
ocnStmSfpPartNumberThis object provides the part number of the SFP.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.47.1.8 |
ocnStmSfpSerialNumberThis object provides the serial number of the SFP.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.47.1.9 |
ocnStmSfpDateOfManufactureThis object provides the date of manufacture of the SFP.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.47.1.10 |
ocnStmSfpConnectorValueThis object provides the SFP connector value.ro SfpConnectorValue (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.11 |
ocnStmSfpLinkLengthThis object provides the SFP Link Length.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.47.1.12 |
ocnStmSfpLaserWaveLengthThis object provides the SFP Laser Wave Length in nano meters.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.47.1.13 |
ocnStmSfpLaserWaveLengthPicometerThis object provide laser wavelength pico value.
For example, laser wavelength is 1510.01,
then ocnStmSfpLaserWaveLength=1510
and ocnStmSfpLaserWaveLengthPicometer=10.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.47.1.14 |
ocnStmSfpMediaTypeThis object provides the SFP Media Type.ro SfpMediaType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.15 |
ocnStmMultiplexingStructuresThis object provides the TDM Multiplexing Structure base on OCn/STM interface.rw MultiplexingStructure .1.3.6.1.4.1.2544.1.12.4.1.47.1.16 |
ocnStmEoTDMModeThis object provides the TDM Mode base on OCn/STM interface.
EoPDH means VCG container is PDH; EoTDM means VCG container is VC of SDH/SONETrw EoTDMMode .1.3.6.1.4.1.2544.1.12.4.1.47.1.17 |
ocnStmLoopbackConfigThis object allows to initiate loopbacks on
on the OCn/STM interface.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.47.1.18 |
ocnStmLoopbackStatusThis object provides status of the current loopback
on the OCn/STM interface.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.47.1.19 |
ocnStmLoopbackTimeThis object allows to specify time for timed-loopbacks on
on the OCn/STM interface.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.47.1.20 |
ocnStmInsertingAISThis object allows to insert AIS-L out from OCn/STM interface
when it is in maintenance state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.47.1.21 |
ocnStmBerExcThresholdThis object provide the threshold of B2EXC.rw BitErrRate .1.3.6.1.4.1.2544.1.12.4.1.47.1.22 |
ocnStmBerDegThresholdThis object provides the threshold of B2DEG.rw BitErrRate .1.3.6.1.4.1.2544.1.12.4.1.47.1.23 |
ocnStmRxTrailTraceThis object provides the recevied J0 on the OCn/STM interface.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.47.1.24 |
ocnStmTxTrailTraceThis object provides the transmit J0 on the OCn/STM interface.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.47.1.25 |
ocnStmExpectedTrailTraceThis object provides the expected J0 on the OCn/STM interface.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.47.1.26 |
ocnStmTrailTraceFormatThis object provides the J0 length mode on the OCn/STM interface.rw TrailTraceFormat .1.3.6.1.4.1.2544.1.12.4.1.47.1.27 |
ocnStmQLModeEnabledThis object allows to specify whether the OCn/STM interface
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous OCn/STM interface,
when ocnStmQLModeEnabled is set to true.
When enabled, on receive side
-port shall PEER the SSM (Sync Status Messages) slow protocol PDUs
and take appropriate action
When enabled, on transmit side
-port shall periodically (once a second) transmit QL TLV
information PDUs
When disabled, on receive side,
-port shall terminate and discard any SSM slow protocol PDUs
When disabled, on transmit side
-port shall not transmit any SSM slow protocol PDUs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.47.1.28 |
ocnStmExpectedQLThis object allows to specify the expected QL when the
OCn/STM interface is enabled for QL Mode. This object
is only applicable for Synchronous OCn/STM interface,
when ocnStmQLModeEnabled is set to true.
This object allows the user to set a minimum
expected received Quality Level on the port. The valid values
depend upon the SYNC entity Network Clock Type. A value of
None represents that a minimum Quality Level is not expected.
The default value shall be None.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.29 |
ocnStmAssumedQLThis object allows to specify the assumed QL on the
OCn/STM interface. This object is only applicable for
Synchronous OCn/STM interface.
The Assumed QL is only meaningful if the Network Clock Type
(see fsp150cm-sync.mib) is option1 and the
port TransmitQL Mode is disabled and the port is being used as
an input reference source. Under these conditions,
the specified QL value is assumed to be the Quality Level of the
non-failed reference.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.30 |
ocnStmReceivedQLThis object provides the Received QL value for the OCn/STM interface.
If the OCn/STM interface TransmitQL Mode is disabled, then the received
QL value is not applicable.This object is only applicable for
Synchronous OCn/STM interface.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.31 |
ocnStmTransmitQLThis object provides the Transmitted QL value for the OCn/STM interface.
If the OCn/STM interface TransmitQL Mode is disabled, then the received
QL value is not applicable. This object is only applicable for
Synchronous OCn/STM interface.ro SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.32 |
ocnStmPortTypeThis object represents the OCN/STM Port Type.
Determines whether the OCN/STM port operates in OC or STM mode.ro OCNSTMPortType .1.3.6.1.4.1.2544.1.12.4.1.47.1.33 |
ocnStmFreqSourceTypeThis object represents the TDM Frequency source of OCN/STM port.rw TDMFrequencySourceType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.47.1.34 |
ocnStmHighOrderPathTypeThis object provides the High Order Path Type of the OCn/STM interface.rw TDMPathType .1.3.6.1.4.1.2544.1.12.4.1.47.1.35 |
stsVcPathTableA list of entries corresponding to OCn Path. SEQUENCE OF StsVcPathEntry .1.3.6.1.4.1.2544.1.12.4.1.48 |
stsVcPathEntryA conceptual row in the stsVcPathTable. StsVcPathEntry .1.3.6.1.4.1.2544.1.12.4.1.48.1 |
stsVcPathParentIfIndexThis object is its parent's ifindex. Based on the Multiplexing hierarchy,
this object points to the container's interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.48.1.1 |
stsVcPathIndexThis object is his index. Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.48.1.2 |
stsVcPathIfIndexThis object has the same value as ifIndex for OCn Path.
An integer index value used to uniquely identify
this OCn Path interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.48.1.3 |
stsVcPathAdminStateThis object represents the Administrative State of the OCn Path.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.48.1.4 |
stsVcPathOperationalStateThis object represents the Operational State of the OCn Path.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.48.1.5 |
stsVcPathSecondaryStateThis object represents the Secondary State of the OCn Path.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.48.1.6 |
stsVcPathLoopbackConfigThis object allows to initiate loopbacks on
on the OCn Path.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.48.1.7 |
stsVcPathLoopbackStatusThis object provides status of the current loopback
on the OCn Path.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.48.1.8 |
stsVcPathLoopbackTimeThis object allows to specify time for timed-loopbacks on
on the OCn Path.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.48.1.9 |
stsVcPathInsertingAISThis object allows to insert AIS-P out from OCn Path
when it is in maintenance state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.48.1.10 |
stsVcPathBerExcThresholdThis object provide the threshold of B3EXC.rw BitErrRate .1.3.6.1.4.1.2544.1.12.4.1.48.1.11 |
stsVcPathBerDegThresholdThis object provides the threshold of B3DEG.rw BitErrRate .1.3.6.1.4.1.2544.1.12.4.1.48.1.12 |
stsVcPathTrailTraceFormatThis object provides the J1 length mode on the OCn Path.rw TrailTraceFormat .1.3.6.1.4.1.2544.1.12.4.1.48.1.13 |
stsVcPathRxTrailTraceThis object provides the recevied J1 on the OCn Path.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.48.1.14 |
stsVcPathTxTrailTraceThis object provides the transmit J1 on the OCn Path.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.48.1.15 |
stsVcPathExpectedTrailTraceThis object provides the expected J1 on the OCn Path.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.48.1.16 |
stsVcPathRxSignalLabelThis object provides the recevied C2 on the OCn Path.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.48.1.17 |
stsVcPathTxSignalLabelThis object provides the transmit C2 on the OCn Path.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.48.1.18 |
stsVcPathExpectedSignalLabelThis object provides the expected C2 on the OCn Path.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.48.1.19 |
stsVcPathRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of stsVcPathRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
stsVcPathRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The stsVcPathRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.48.1.20 |
stsVcPathLowOrderPathTypeThis object provides the low Order Path Type of the sts vc interface.rw TDMPathType .1.3.6.1.4.1.2544.1.12.4.1.48.1.21 |
vtVcPathTableA list of entries corresponding to VT1.5/VC12. These represent the
lower order path (LOP) entities. SEQUENCE OF VtVcPathEntry .1.3.6.1.4.1.2544.1.12.4.1.49 |
vtVcPathEntryA conceptual row in the vtVcPathTable. VtVcPathEntry .1.3.6.1.4.1.2544.1.12.4.1.49.1 |
vtVcPathParentIfIndexThis object is its parent's ifindex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.49.1.1 |
vtVcPathIndexThis object represents the unique number of the Path within the
parent container represented by vtvcPathParentIfIndex. Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.49.1.2 |
vtVcPathIfIndexThis object has the same value as ifIndex for OCn VT1.5/VC12.
An integer index value used to uniquely identify
this OCn VT1.5/VC12 interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.49.1.3 |
vtVcPathAdminStateThis object represents the Administrative State of the OCn VT1.5/VC12.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.49.1.4 |
vtVcPathOperationalStateThis object represents the Operational State of the OCn VT1.5/VC12.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.49.1.5 |
vtVcPathSecondaryStateThis object represents the Secondary State of the OCn VT1.5/VC12.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.49.1.6 |
vtVcPathLoopbackConfigThis object allows to initiate loopbacks on
on the OCn VT1.5/VC12.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.49.1.7 |
vtVcPathLoopbackStatusThis object provides status of the current loopback
on the OCn VT1.5/VC12.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.49.1.8 |
vtVcPathLoopbackTimeThis object allows to specify time for timed-loopbacks on
on the OCn VT1.5/VC12.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.49.1.9 |
vtVcPathInsertingAISThis object allows to insert AIS-P out from OCn VT1.5/VC12
when it is in maintenance state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.49.1.10 |
vtVcPathBerExcThresholdThis object provide the threshold of BEREXC.rw BitErrRate .1.3.6.1.4.1.2544.1.12.4.1.49.1.11 |
vtVcPathBerDegThresholdThis object provides the threshold of BERDEG.rw BitErrRate .1.3.6.1.4.1.2544.1.12.4.1.49.1.12 |
vtVcPathTrailTraceFormatThis object provides the J2 length mode on the OCn VT1.5/VC12.ro TrailTraceFormat .1.3.6.1.4.1.2544.1.12.4.1.49.1.13 |
vtVcPathRxTrailTraceThis object provides the recevied J2 on the OCn VT1.5/VC12.ro DisplayString .1.3.6.1.4.1.2544.1.12.4.1.49.1.14 |
vtVcPathTxTrailTraceThis object provides the transmit J2 on the OCn VT1.5/VC12.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.49.1.15 |
vtVcPathExpectedTrailTraceThis object provides the expected J2 on the OCn VT1.5/VC12.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.49.1.16 |
vtVcPathRxSignalLabelThis object provides the recevied V5 byte(b5-b7) on the OCn VT1.5/VC12.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.49.1.17 |
vtVcPathTxSignalLabelThis object provides the transmit V5 byte(b5-b7) on the OCn VT1.5/VC12.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.49.1.18 |
vtVcPathExpectedSignalLabelThis object provides the expected V5 byte(b5-b7) on the OCn VT1.5/VC12.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.49.1.19 |
vtVcPathRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of vtVcPathRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
vtVcPathRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The vtVcPathRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.49.1.20 |
e1t1TableA list of entries corresponding to E1/T1. SEQUENCE OF E1T1Entry .1.3.6.1.4.1.2544.1.12.4.1.50 |
e1t1EntryA conceptual row in the e1t1Table. E1T1Entry .1.3.6.1.4.1.2544.1.12.4.1.50.1 |
e1t1ParentIfIndexThis object represents the parent (container) object's interface index.
In the case when parent of E1T1Entry does not have a InterfaceIndex
then the e1t1ParentIfIndex shall have the value of 2147483647,
e.g. if parent of E1T1Entry is a card represented in pseudoWireE1T1CardTable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.50.1.1 |
e1t1IndexIndex value used to uniquely identify
this E1/T1 interface, within the parent container specified by
e1t1ParentIfIndex. Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.50.1.2 |
e1t1IfIndexThis object has the same value as ifIndex for E1/T1.
An integer index value used to uniquely identify
this E1/T1 interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.50.1.3 |
e1t1EntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.50.1.4 |
e1t1AdminStateThis object represents the Administrative State of the E1/T1.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.50.1.5 |
e1t1OperationalStateThis object represents the Operational State of the E1/T1.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.50.1.6 |
e1t1SecondaryStateThis object represents the Secondary State of the E1/T1.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.50.1.7 |
e1t1LoopbackConfigThis object allows to initiate loopbacks on
on the E1/T1.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.50.1.8 |
e1t1LoopbackStatusThis object provides status of the current loopback
on the E1/T1.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.50.1.9 |
e1t1LoopbackTimeThis object allows to specify time for timed-loopbacks on
on the E1/T1.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.50.1.10 |
e1t1RemoteLoopbackRequestThis object allows to specify to repond the remote loopback request or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.50.1.11 |
e1t1InsertingAISThis object allows to insert AIS out from E1/T1
when it is in maintenance state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.50.1.12 |
e1t1RowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of e1t1RowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
e1t1RowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The e1t1RowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.50.1.13 |
e1t1LineTypeThis object represents the E1/T1 Line Type.
Determines whether the E1/T1 interface operates in T1 or E1 mode.ro E1T1LineType .1.3.6.1.4.1.2544.1.12.4.1.50.1.14 |
e1t1LineCodeThis object represents the E1/T1 Port Line Code.
When the port is configured for a Line Type of T1,
the valid values are t1-b8zs and t1-ami and the default value
is t1-b8zs. When the port is configured for a Line Type of E1,
the valid values are e1-hdb3 and e1-ami and the default value
is e1-hdb3.rw E1T1LineCode .1.3.6.1.4.1.2544.1.12.4.1.50.1.15 |
e1t1FrameFormatThis object represents the E1/T1 Port Frame Format.
When the port is configured for a Line Type of T1, the
valid values are t1-sf, t1-esf and t1-unframed and the default
value is t1-unframed.
When the port is configured for a Line Type of E1, the
valid values are e1-unframed, e1-crc4, and e1-dualFrame
and the default value is e1-crc4.
R5.4CC supports only t1-unframed for T1 Line type.rw E1T1FrameFormat .1.3.6.1.4.1.2544.1.12.4.1.50.1.16 |
e1t1LineBuildOutThis object represents Line Build Out on E1/T1 port.rw LineBuildOut .1.3.6.1.4.1.2544.1.12.4.1.50.1.17 |
e1t1TimingDomainThis object represents Timing Domain that the E1/T1 interface uses as
timing source. The Timing Domain is a Synchronization Entity
represented by an object in the f3SyncTablerw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.50.1.18 |
e1t1RcvSensitivityThis object allows configuring the reciever sensitivity based on expected
signal strengthrw E1T1RcvSensitivity .1.3.6.1.4.1.2544.1.12.4.1.50.1.19 |
e1t1IdlePatternProfileThis object allows selecting Idle Pattern Profile for the E1/T1 interface.
Idle Patter Profile is represented by an object in the
f3Pwe3IdlePatternProfileTablerw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.50.1.20 |
e1t1LoopbackProfileThis object allows selecting Loopback Profile for the E1/T1 interface.
Loopback Profile is represented by an object in the
f3Pwe3LoopbackProfileTablerw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.50.1.21 |
e1t1RelatedContainerIdThis object describes the related container VCG.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.50.1.22 |
e3t3TableA list of entries corresponding to E3/T3. SEQUENCE OF E3T3Entry .1.3.6.1.4.1.2544.1.12.4.1.51 |
e3t3EntryA conceptual row in the e3t3Table. E3T3Entry .1.3.6.1.4.1.2544.1.12.4.1.51.1 |
e3t3ParentIfIndexThis object is its parent's ifindex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.51.1.1 |
e3t3IndexThis object is his index. Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.51.1.2 |
e3t3IfIndexThis object has the same value as ifIndex for E3/T3.
An integer index value used to uniquely identify
this E3/T3 interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.51.1.3 |
e3t3EntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.51.1.4 |
e3t3AdminStateThis object represents the Administrative State of the E3/T3.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.51.1.5 |
e3t3OperationalStateThis object represents the Operational State of the E3/T3.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.51.1.6 |
e3t3SecondaryStateThis object represents the Secondary State of the E3/T3.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.51.1.7 |
e3t3LoopbackConfigThis object allows to initiate loopbacks on
on the E3/T3.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.51.1.8 |
e3t3LoopbackStatusThis object provides status of the current loopback
on the E3/T3.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.51.1.9 |
e3t3LoopbackTimeThis object allows to specify time for timed-loopbacks on
on the E3/T3.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.51.1.10 |
e3t3RemoteLoopbackRequestThis object allows to specify to repond the remote loopback request or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.51.1.11 |
e3t3InsertingAISThis object allows to insert AIS out from E3/T3
when it is in maintenance state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.51.1.12 |
e3t3CBitEnableThe object provides whether C-Bit Parity is enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.51.1.13 |
e3t3T3ChannelizedThe object provides whether the T3 tunnel is channlized with T1.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.51.1.14 |
e3t3RowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of e3t3RowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
e3t3RowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The e3t3RowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.51.1.15 |
e3t3FrameFormatThis object represents the Frame Format of the E3/T3.rw E3T3FrameFormat .1.3.6.1.4.1.2544.1.12.4.1.51.1.16 |
e3t3RelatedContainerIdThis object describe the related contained VCG.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.51.1.17 |
cmEthernetTrafficPortExtTableA list of entries corresponding to Ethernet
Facilities for configuration purposes. SEQUENCE OF CmEthernetTrafficPortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.52 |
cmEthernetTrafficPortExtEntryA conceptual row in the cmEthernetTrafficPortExtTable. CmEthernetTrafficPortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.52.1 |
cmEthernetTrafficPortTDMEncapsulationThis object describes the GFP Encapsulation type of the traffic port.rw GFPEncapsulationType .1.3.6.1.4.1.2544.1.12.4.1.52.1.1 |
cmEthernetTrafficPortRelatedVCGThis object describes the related VCG of the traffic port.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.52.1.2 |
f3PulsePerSecondPortTableA list of entries corresponding to Pulse Per Second
Port Facilities. SEQUENCE OF F3PulsePerSecondPortEntry .1.3.6.1.4.1.2544.1.12.4.1.53 |
f3PulsePerSecondPortEntryA conceptual row in the f3PulsePerSecondPortTable. F3PulsePerSecondPortEntry .1.3.6.1.4.1.2544.1.12.4.1.53.1 |
f3PulsePerSecondPortIndexAn integer index value used to uniquely identify
this Pulse Per Second Port within the card. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.53.1.1 |
f3PulsePerSecondPortIfIndexThis object has the same value as ifIndex for
Pulse Per Second Port. An integer index value used to
uniquely identify this Pulse Per Second Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.2 |
f3PulsePerSecondPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.3 |
f3PulsePerSecondPortAdminStateThis object represents the Administrative State of the Pulse Per Second
Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.4 |
f3PulsePerSecondPortOperationalStateThis object represents the Operational State of the Pulse Per Second
Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.5 |
f3PulsePerSecondPortSecondaryStateThis object represents the Secondary State of the Pulse Per Second
Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.6 |
f3PulsePerSecondPortSquelchControlThis object allows to set the Squelch Control for the Pulse Per Second port.
The Squelch Control is used to determine the type of squelch control
used to squelch the output of the TOD port.rw SquelchControl (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.7 |
f3PulsePerSecondPortSquelchQLThis object allows to set the Squelch QL for the Pulse Per Second port.
This value is used when f3PulsePerSecondPortSquelchControl is squelch-ql.
The Squelch QL is used to determine whether or not to squelch
the output of the TOD port. If the system's QL is lower
than the Squelch QL, the output is squelched.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.8 |
f3PulsePerSecondPortTODSourceThis object allows to set the Pulse Per Second Source for the Port.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.53.1.9 |
f3PulsePerSecondPortDirectionThis object allows specification of the signal type
(i.e. input or output).rw SignalDirectionType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.10 |
f3PulsePerSecondPortInputRateThis object allows specification of the PPS Input Rate.rw PPSInputRate .1.3.6.1.4.1.2544.1.12.4.1.53.1.11 |
f3PulsePerSecondPortDelayCompensationThis object allows specification of the PPS external Delay
Compensation in nanoseconds. The valid values are 0 to 96 in
8 nanoseconds steps. Values which are not multiple of 8 will
be automatically rounded up to the next multiple of 8.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.53.1.12 |
f3PulsePerSecondPortClockClassThis object specify PPS port clock class.rodeprecated Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.53.1.13 |
f3PulsePerSecondPortClockAccuracyThis object specify PPS port clock accuracy.rodeprecated Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.53.1.14 |
f3PulsePerSecondPortTimeSourceThis object specify PPS port time source.rodeprecated TimeSource (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.53.1.15 |
f3PulsePerSecondPortPhyInterfaceTypeThis object specify PPS physical interface type.rw PPSPhyInterfaceType .1.3.6.1.4.1.2544.1.12.4.1.53.1.16 |
f3TimeOfDayPortTableA list of entries corresponding to Time Of Day
Port Facilities. SEQUENCE OF F3TimeOfDayPortEntry .1.3.6.1.4.1.2544.1.12.4.1.55 |
f3TimeOfDayPortEntryA conceptual row in the f3TimeOfDayPortTable. F3TimeOfDayPortEntry .1.3.6.1.4.1.2544.1.12.4.1.55.1 |
f3TimeOfDayPortIndexAn integer index value used to uniquely identify
this Time Of Day Port within the card. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.55.1.1 |
f3TimeOfDayPortIfIndexThis object has the same value as ifIndex for
Time Of Day Port. An integer index value used to
uniquely identify this Time Of Day Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.55.1.2 |
f3TimeOfDayPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.55.1.3 |
f3TimeOfDayPortAdminStateThis object represents the Administrative State of the Time Of Day
Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.55.1.4 |
f3TimeOfDayPortOperationalStateThis object represents the Operational State of the Time Of Day
Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.55.1.5 |
f3TimeOfDayPortSecondaryStateThis object represents the Secondary State of the Time Of Day
Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.55.1.6 |
f3TimeOfDayPortSquelchControlThis object allows to set the Squelch Control for the Time Of Day port.
The Squelch Control is used to determine the type of squelch control
used to squelch the output of the TOD port.rw SquelchControl (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.55.1.7 |
f3TimeOfDayPortSquelchQLThis object allows to set the Squelch QL for the Time Of Day port.
This value is used when f3TimeOfDayPortSquelchControl is squelch-ql.
The Squelch QL is used to determine whether or not to squelch
the output of the TOD port. If the system's QL is lower
than the Squelch QL, the output is squelched.rw SSMQualityLevel (F3-SYNC-MIB) .1.3.6.1.4.1.2544.1.12.4.1.55.1.8 |
f3TimeOfDayPortTODSourceThis object allows to set the Time Of Day Source for the Port.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.55.1.9 |
cmEthernetNetPortExtTableA list of entries corresponding to Ethernet Network Port
Facilities for configuration purposes. SEQUENCE OF CmEthernetNetPortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.56 |
cmEthernetNetPortExtEntryA conceptual row in the cmEthernetNetPortExtTable. CmEthernetNetPortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.56.1 |
cmEthernetNetPortTDMEncapsulationThis object describes the GFP Encapsulation type of the TDM network port.rw GFPEncapsulationType .1.3.6.1.4.1.2544.1.12.4.1.56.1.1 |
cmEthernetNetPortAssociatedTdmEntityThis object describes the associated working path of TDM network port.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.56.1.2 |
cmEthernetNetPortInsertingAISThis object allows to insert AIS out from TDM network port
when it is in maintenance state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.56.1.3 |
f3GPSReceiverPortTableA list of entries corresponding to the GPS Receiver Port
Facilities. SEQUENCE OF F3GPSReceiverPortEntry .1.3.6.1.4.1.2544.1.12.4.1.57 |
f3GPSReceiverPortEntryA conceptual row in the f3GPSReceiverPortTable. F3GPSReceiverPortEntry .1.3.6.1.4.1.2544.1.12.4.1.57.1 |
f3GPSReceiverPortIndexAn integer index value used to uniquely identify
this GPS Receiver Port within the card. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.57.1.1 |
f3GPSReceiverPortIfIndexThis object has the same value as ifIndex for
Time Of Day Port. An integer index value used to
uniquely identify this GPS Receiver Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.57.1.2 |
f3GPSReceiverPortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.57.1.3 |
f3GPSReceiverPortAdminStateThis object represents the Administrative State of the GPS
Receiver Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.57.1.4 |
f3GPSReceiverPortOperationalStateThis object represents the Operational State of the GPS
Receiver Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.57.1.5 |
f3GPSReceiverPortSecondaryStateThis object represents the Secondary State of the GPS
Receiver Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.57.1.6 |
f3GPSReceiverPortPPSGenConditionThis object allows for configuration of the PPS generation
condition. PPS is generated when at least one satellite
is tracked or when at least three satellites are tracked.rw PPSGenCondition .1.3.6.1.4.1.2544.1.12.4.1.57.1.7 |
f3GPSReceiverPortAntennaCableLengthThis object allows for configuration of the GPS
Antenna cable length in meters.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.57.1.8 |
f3GPSReceiverPortAntennaStatusThis object provides the GPS Receiver Port Antenna status.ro GPSAntennaStatus .1.3.6.1.4.1.2544.1.12.4.1.57.1.9 |
f3GPSReceiverPortSatellitesUsableFlagThis object provides information on whether the satellites are
usable. It is set to TRUE, when ephemeris and health data for
at least one satellite is available.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.57.1.10 |
f3GPSReceiverPortNumTrackingSatellitesThis object provides information on the number of tracking
satellites.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.57.1.11 |
f3GPSReceiverPortSelfSurveyProgressThis object provides information on the percentage of
fixes collected so far.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.57.1.12 |
f3GPSReceiverPortPPSGeneratedFlagThis object indicates whether there are enough usable satellites
to provide accurate PPS output.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.57.1.13 |
f3GPSReceiverPortGnssSystemThis object configure Constellation Type of the GPS
Antenna.rw ConstellationType .1.3.6.1.4.1.2544.1.12.4.1.57.1.14 |
f3GPSReceiverPortInstallationTypeThis object configure Installation Type of the GPS
Antenna.rw InstallationType .1.3.6.1.4.1.2544.1.12.4.1.57.1.15 |
f3GPSReceiverPortGnssTODThis object provides the last time was executed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.57.1.16 |
f3GPSReceiverPortGnssSystemsBitMapthis object configures GNSS constellation types supported by a GNSS Receiver Portrw ConstellationTypesBitMap .1.3.6.1.4.1.2544.1.12.4.1.57.1.17 |
f3GPSReceiverPortAliasThis object provides an alias to the GPS portrw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.57.1.18 |
cmPethPsePortExtTableA list of entries corresponding to PsePortExtEntry. SEQUENCE OF CmPethPsePortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.58 |
cmPethPsePortExtEntryA conceptual row in the cmPethPsePortExtEntry. CmPethPsePortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.58.1 |
cmPethPsePortExtGroupIndexThis object has the same value with the group index in pethPsePortTalbe. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.58.1.1 |
cmPethPsePortExtIndexThis object has the same value with the port index in pethPsePortTalbe. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.58.1.2 |
cmPethPsePortExtAssociatedPortThis object means the oid of associated physical port.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.58.1.3 |
pethPsePortExtPowerConsumptionThis object means the power consumption of each port in mWatts.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.58.1.4 |
pethPsePortExtAvailablePowerLevelThis object means the pse port available power level.rw PsePowerLevel .1.3.6.1.4.1.2544.1.12.4.1.58.1.5 |
pethMainPseEXTTableA list of entries corresponding to PethMainPseEXTEntry. SEQUENCE OF PethMainPseEXTEntry .1.3.6.1.4.1.2544.1.12.4.1.59 |
pethMainPseEXTEntryA conceptual row in the pethMainPseEXTEntry. PethMainPseEXTEntry .1.3.6.1.4.1.2544.1.12.4.1.59.1 |
pethMainPseExtGroupIndexThis object has the same value with the group index in pethMainPseEXTTable. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.59.1.1 |
pethMainPseExtNonStandardPDdisabled: don't support non-standard PD,
enabled: support non-standard PDrw PSENonStandardPD .1.3.6.1.4.1.2544.1.12.4.1.59.1.2 |
cmMPFlowTableA list of entries corresponding to MPFlow. SEQUENCE OF CmMPFlowEntry .1.3.6.1.4.1.2544.1.12.4.1.60 |
cmMPFlowEntryA conceptual row in the cmMPFlowTable. CmMPFlowEntry .1.3.6.1.4.1.2544.1.12.4.1.60.1 |
cmMPFlowIndexAn integer index value used to uniquely identify this MultiPointFlow. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.60.1.1 |
cmMPFlowCircuitNameThis object allows SNMP management entities to provide a
circuit identifier with the MPFlow.rw F3DisplayString (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.60.1.2 |
cmMPFlowAdminStateThis object represents the Administrative State of the Flow.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.60.1.3 |
cmMPFlowOperationalStateThis object represents the Operational State of the Flow.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.60.1.4 |
cmMPFlowSecondaryStateThis object represents the Secondary State of the Flow.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.60.1.5 |
cmMPFlowLearningEnabledDISABLED: The forwarding function of the Flow does not
dynamically learn MAC address to flowpoint mapping.
ENABLED: The forwarding function of the Flow dynamically
learns MAC address to flowpoint mapping based on ingress
flowpoing and source MAC address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.60.1.6 |
cmMPFlowAgingTimerMAC Table Entry will be removed from the forwarding table
after an inactivity time represented by this entry.
Not used in EG-X.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.60.1.7 |
cmMPFlowFwdTableSizeProfileIDProfile ID for Maximum number of MAC Table Entries for the flowrw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.60.1.8 |
cmMPFlowtableFullActionAction on ingress frames when the number of MAC Table entires
has reached the maximum defined by tableSize.
BLOCK: A frame with a Source MAC address not in the MAC
Table will be discarded.
FORWARD: A frame with a Source MAC address not in the MAC table
will not be learned and will be flooded to other flowpoints.rw LearningAction .1.3.6.1.4.1.2544.1.12.4.1.60.1.9 |
cmMPFlowStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.60.1.10 |
cmMPFlowRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmMPFlowRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmFlowRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmMPFlowRowStatus object may be modified if
the associated instance of this object is equal to active(1).
Note that flow creation and deletion is only supported
with access port in connection-oriented evpl mode.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.60.1.11 |
cmMPFlowLearningConfigActionThis objects allows performing user action on Learning Table.rw LearningConfigAction .1.3.6.1.4.1.2544.1.12.4.1.60.1.12 |
cmMPFlowFPListThis object only used to display trap and Flow point list.
Fp will be add in the cmMPFlowMemberTable.rw F3DisplayString (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.60.1.13 |
cmMPFlowMemberTableA list of entries corresponding to MPFlowMember. SEQUENCE OF CmMPFlowMemberEntry .1.3.6.1.4.1.2544.1.12.4.1.61 |
cmMPFlowMemberEntryA conceptual row in the cmMPFlowMemberTable. CmMPFlowMemberEntry .1.3.6.1.4.1.2544.1.12.4.1.61.1 |
cmMPFlowMemberFPIndexThis object describes the relate Flow point. VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.61.1.1 |
cmMPFlowPointRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmMPFlowPointRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmFlowRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmMPFlowPointRowStatus object may be modified if
the associated instance of this object is equal to active(1).
Note that flow creation and deletion is only supported
with access port in connection-oriented evpl mode.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.61.1.2 |
cmEthernetTrafficPortPcpDEEncTableEthernetTraffic Port PCP drop eligibility encoding table. This
is applied to a frame that is egressing at the EthernetTraffic port. SEQUENCE OF CmEthernetTrafficPortPcpDEEncEntry .1.3.6.1.4.1.2544.1.12.4.1.62 |
cmEthernetTrafficPortPcpDEEncEntryA conceptual row in the ethernetPBPcpDEEncPortTable. CmEthernetTrafficPortPcpDEEncEntry .1.3.6.1.4.1.2544.1.12.4.1.62.1 |
cmEthernetTrafficPortPcpDEEncIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible encoding table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.62.1.1 |
cmEthernetTrafficPortPcpDEEncInPriorityThis object is the input priority that is translated to a
drop eligibility priority or a drop ineligibility priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.62.1.2 |
cmEthernetTrafficPortPcpDEEncDropIneligiblePrioThis object is the PCP value that has a priority value with
implicit drop ineligibility encoded into it.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.62.1.3 |
cmEthernetTrafficPortPcpDEEncDropEligiblePrioThis object is the PCP value that has a priority value with
implicit drop eligibility encoded into it.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.62.1.4 |
cmEthernetTrafficPortPcpDEDecTableEthernetTraffic Port PCP drop eligibility decoding table. This
is applied to a frame that is ingressing at a port. SEQUENCE OF CmEthernetTrafficPortPcpDEDecEntry .1.3.6.1.4.1.2544.1.12.4.1.63 |
cmEthernetTrafficPortPcpDEDecEntryA conceptual row in the ethernetPBPcpDEDecPortTable. CmEthernetTrafficPortPcpDEDecEntry .1.3.6.1.4.1.2544.1.12.4.1.63.1 |
cmEthernetTrafficPortPcpDEDecIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible decoding table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.63.1.1 |
cmEthernetTrafficPortPcpDEDecInPriorityThis object is the input priority that is decoded to get
priority and the drop eligibility of a frame.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.63.1.2 |
cmEthernetTrafficPortPcpDEDecOutPriorityThis object is the priority value decoded from a incoming PCP value.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.63.1.3 |
cmEthernetTrafficPortPcpDEDecDropEligibleThis object is the drop eligibility decoded from a incoming
PCP value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.63.1.4 |
cmEthernetTrafficPortPcpDEPairTableEthernetTraffic Port PCP drop eligibility priority pair table.
The priority pair is encoded to same drop eligibility and
drop ineligibility priority. Depending on the PCP DE Enc/Dec
mode there can be upto 3 pairs in the table. There will one
pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D. SEQUENCE OF CmEthernetTrafficPortPcpDEPairEntry .1.3.6.1.4.1.2544.1.12.4.1.64 |
cmEthernetTrafficPortPcpDEPairEntryA conceptual row in the cmAccPortPcpDEPairEntry. CmEthernetTrafficPortPcpDEPairEntry .1.3.6.1.4.1.2544.1.12.4.1.64.1 |
cmEthernetTrafficPortPcpDEPairIndexAn integer index value used to uniquely identify
a row in the PCP drop eligible priority pair table.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.64.1.1 |
cmEthernetTrafficPortPcpDEDropIneligiblePrioThis object is the drop ineligible priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.64.1.2 |
cmEthernetTrafficPortPcpDEDropEligiblePrioThis object is the drop eligible priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.64.1.3 |
cmEthernetTrafficPortClbTableA list of entries corresponding to Ethernet Traffic Port
Cable Length Benchmark. SEQUENCE OF CmEthernetTrafficPortClbEntry .1.3.6.1.4.1.2544.1.12.4.1.65 |
cmEthernetTrafficPortClbEntryA conceptual row in the cmEthernetTrafficPortClbTable.
These entries represent Cable Length Benchmarks
on the Ethernet Traffic Port. CmEthernetTrafficPortClbEntry .1.3.6.1.4.1.2544.1.12.4.1.65.1 |
cmEthernetTrafficPortClbIndexAn integer index value used to uniquely identify
this Cable Length Benchmark Entry specification.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.65.1.1 |
cmEthernetTrafficPortClbEnabledThis enables specification of Cable Length Benchmark entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.65.1.2 |
cmEthernetTrafficPortClbLengthCable length of Cable Points Entry. The cable length is of
the form XXX[.YY] where XX can be any integer value and YY
allows precision of 2 decimals after the floating point. Note
that .YY is optional.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.65.1.3 |
cmEthernetTrafficPortClbDescrA textual string containing description of cable span.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.65.1.4 |
networkElementTMParamsTableEntries may be auto discovered, or can be explicitly created by
SNMP Manager. Each remotely discovered shelf is represented as
a row in this table. SEQUENCE OF NetworkElementTMParamsEntry .1.3.6.1.4.1.2544.1.12.4.1.66 |
networkElementTMParamsEntryA conceptual row in the networkElementTMParamsTable. NetworkElementTMParamsEntry .1.3.6.1.4.1.2544.1.12.4.1.66.1 |
neTMParamsBandwidthProfileModeA Network Element level Bandwidth Profile Mode shall be supported
which will indicate if the CIR/EIR is interpreted as Information Rate (IR)
or Line Rate (LR). In IR mode BWP is enforced based on number of bytes beginning
with DA and ending with FCS as it was received at a port which is called the Service
Frame in MEF terminology. In LR mode the BWP is enforced based on the whole frame
including IFG, Preamble and SFD.rw BandwidthProfileMode .1.3.6.1.4.1.2544.1.12.4.1.66.1.1 |
neTMParamsAgingtimeThe object describe the system aging time.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.66.1.2 |
cmEthernetAccPortJdsuExtTableA list of entries corresponding to Ethernet Access Port
Facilities for JDSU configuration purposes. SEQUENCE OF CmEthernetAccPortJdsuExtEntry .1.3.6.1.4.1.2544.1.12.4.1.67 |
cmEthernetAccPortJdsuExtEntryA conceptual row in the cmEthernetAccPortJdsuExtTable. CmEthernetAccPortJdsuExtEntry .1.3.6.1.4.1.2544.1.12.4.1.67.1 |
cmEthernetAccPortJDSUControlFramesSnoopingEnabledEnabled: reaction/response to JDSU in-band loopback requests and hallo requests.
Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests.
FPGA shall not filter the JDSU control frames to processor.
From enabled to disabled, if there is already a JDSU loopback on the port,
release current loopback.
JDSU loopback doesn't need port in maintenance state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.67.1.1 |
cmEthernetAccPortJDSULoopbackVlanApplicable when port in JDSU VLAN loopback.ro VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.67.1.2 |
cmEthernetNetPortJdsuExtTableA list of entries corresponding to Ethernet Network Port
Facilities for JDSU configuration purposes. SEQUENCE OF CmEthernetNetPortJdsuExtEntry .1.3.6.1.4.1.2544.1.12.4.1.68 |
cmEthernetNetPortJdsuExtEntryA conceptual row in the cmEthernetNetPortJdsuExtTable. CmEthernetNetPortJdsuExtEntry .1.3.6.1.4.1.2544.1.12.4.1.68.1 |
cmEthernetNetPortJDSUControlFramesSnoopingEnabledEnabled: reaction/response to JDSU in-band loopback requests and hallo requests.
Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests.
FPGA shall not filter the JDSU control frames to processor.
From enabled to disabled, if there is already a JDSU loopback on the port,
release current loopback.
JDSU loopback doesn't need port in maintenance state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.68.1.1 |
cmEthernetNetPortJDSULoopbackVlanApplicable when port in JDSU VLAN loopback.ro VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.68.1.2 |
cmEthernetTrafficPortLpbkTableA list of entries corresponding to Vlan loopback on
Ethernet Traffic Port. SEQUENCE OF CmEthernetTrafficPortLpbkEntry .1.3.6.1.4.1.2544.1.12.4.1.69 |
cmEthernetTrafficPortLpbkEntryA conceptual row in the cmEthernetTrafficPortLpbkTable.
These entries represent Vlan loopback
on the Ethernet Traffic Port. CmEthernetTrafficPortLpbkEntry .1.3.6.1.4.1.2544.1.12.4.1.69.1 |
cmEthernetTrafficPortLpbkIndexAn integer index value used to uniquely identify
this vlan loopback entry. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.69.1.1 |
cmEthernetTrafficPortLpbkInnerVlanEnabledThis object represent the inner vlan whether enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.69.1.2 |
cmEthernetTrafficPortLpbkInnerVlanTagThis object represent the inner vlanid value and priority value.
The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.69.1.3 |
cmEthernetTrafficPortLpbkOuterVlanEnabledThis object represent the outter vlan whether enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.69.1.4 |
cmEthernetTrafficPortLpbkOuterVlanTagThis object represent the outter vlanid value and priority value.
The value to be specified should be in the form
X-Y where X is the VLAN Id and Y is the VLAN Priority.
If Y is specified as a *, all Priorities (0 to 7)
are looped back.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.69.1.5 |
cmEthernetTrafficPortLpbkTimeThis object represent the vlan loopback time.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.69.1.6 |
cmEthernetTrafficPortLpbkStatusThis object represent the vlan loopback status.ro CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.69.1.7 |
cmEthernetTrafficPortLpbkConfigThis object represent the vlan loopback action.rw CmLoopbackType .1.3.6.1.4.1.2544.1.12.4.1.69.1.8 |
cmPrioMapV2ProfileTableA list of entries corresponding to Ethernet Priority Mappings V2 Profile. SEQUENCE OF CmPrioMapV2ProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.70 |
cmPrioMapV2ProfileEntryA conceptual row in the cmPrioMapV2ProfileTable. CmPrioMapV2ProfileEntry .1.3.6.1.4.1.2544.1.12.4.1.70.1 |
cmPrioMapV2ProfileIndexThe integer index value describes the profile index. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.70.1.1 |
cmPrioMapV2ProfileAliasThe integer index value describes the profile alias.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.70.1.2 |
cmPrioMapV2ProfileMapModeTypeThe integer index value describes the profile PriorityMapMode.rw PriorityMapMode (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.70.1.3 |
cmPrioMapV2ProfileStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.70.1.4 |
cmPrioMapV2ProfileRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of cmPrioMapV2ProfileStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
cmPrioMapV2ProfileRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The cmPrioMapV2ProfileRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.70.1.5 |
cmPrioMapV2ProfileIngressCosPriorityThis object is used to specify whether the profile
uses the inner-tag or the outer-tag in determining the COS (Class of Service).rwdeprecated VlanTagType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.70.1.6 |
cmPrioMapV2ProfileCosMapModeTypeThis object is used to specify Cos mapping mode type.rw CosMappingMode .1.3.6.1.4.1.2544.1.12.4.1.70.1.7 |
cmPrioMapV2ProfileCosMapControlThis object is used to control whether has cmPrioMapV2PrioMappingCOSTable in profile.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.70.1.8 |
cmPrioMapV2ProfileDefaultCosThis object is used to specify the Default COS to be used when the
Ingress Priority Mapping function does not match.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.70.1.9 |
cmPrioMapV2IngressPrioMappingTableA list of entries corresponding to Ethernet Priority Mappings. SEQUENCE OF CmPrioMapV2IngressPrioMappingEntry .1.3.6.1.4.1.2544.1.12.4.1.71 |
cmPrioMapV2IngressPrioMappingEntryA conceptual row in the cmPrioMapV2IngressPrioMappingTable. CmPrioMapV2IngressPrioMappingEntry .1.3.6.1.4.1.2544.1.12.4.1.71.1 |
cmPrioMapV2IngressPrioMappingIndexThe integer index value corresponding to a priority value
based on the cmPrioMapV2ProfileMode.
In case of TOS and 8021P, valid indices are 1 to 8,
in case of DSCP, valid indices are 1 to 64. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.71.1.1 |
cmPrioMapV2IngressPrioMappingInPriorityThe integer index value corresponding to a priority value
based on the cmPrioMapV2ProfileMode.
In case of TOS and 8021P, valid indices are 0 to 7,
in case of DSCP, valid indices are 0 to 63.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.71.1.2 |
cmPrioMapV2IngressPrioMappingCOSThis allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.71.1.3 |
cmPrioMapV2PrioMappingCOSTableA list of entries corresponding to Ethernet Priority Mappings. SEQUENCE OF CmPrioMapV2PrioMappingCOSEntry .1.3.6.1.4.1.2544.1.12.4.1.72 |
cmPrioMapV2PrioMappingCOSEntryA conceptual row in the cmPrioMapV2PrioMappingCOSTable. CmPrioMapV2PrioMappingCOSEntry .1.3.6.1.4.1.2544.1.12.4.1.72.1 |
cmPrioMapV2PrioMappingCOSIndexThe index of this entry. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.72.1.1 |
cmPrioMapV2PrioMappingCOSValueThis allows specification of the COS Value, i.e.
this helps in determining the appropriate COS Policer for
the Flow.ro Integer32 .1.3.6.1.4.1.2544.1.12.4.1.72.1.2 |
cmPrioMapV2PrioMappingCOSOuterTagPriThis allows specification of the VLAN priority that
will replace the outgoing (A2N direction) outer-tag's priority.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.72.1.3 |
cmPrioMapV2PrioMappingCOSInnerTagPriThis allows specification of the VLAN priority that
will replace the outgoing (A2N direction) inner-tag's (i.e. second tag)
priority.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.72.1.4 |
cmPrioMapV2PrioMappingEncapOuterTagPriorityThis object allows configuring encapsulation outer tag priority value of ingress cos mapping.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.72.1.5 |
cmPrioMapV2PrioMappingEncapInnerTagPriorityThis object allows configuring encapsulation inner tag priority value of ingress cos mapping.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.72.1.6 |
cmPrioMapV2PrioMappingEncapOuterDscpValueThis object allows configuring encapsulation outer DSCP value of ingress cos mapping.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.72.1.7 |
cmPrioMapV2PrioMappingDscpValueThis object allows configuring DSCP value of ingress cos mapping.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.72.1.8 |
cmPrioMapV2PrioMappingPriTableA list of entries corresponding to Ethernet Priority Mappings. SEQUENCE OF CmPrioMapV2PrioMappingPriEntry .1.3.6.1.4.1.2544.1.12.4.1.73 |
cmPrioMapV2PrioMappingPriEntryA conceptual row in the cmPrioMapV2PrioMappingPriTable. CmPrioMapV2PrioMappingPriEntry .1.3.6.1.4.1.2544.1.12.4.1.73.1 |
cmPrioMapV2PrioMappingPriIndexThe integer index value corresponding to a priority value
based on the cmPrioMapV2ProfileMode.
In case of TOS and 8021P, valid indices are 1 to 8,
in case of DSCP, valid indices are 1 to 64. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.73.1.1 |
cmPrioMapV2PrioMappingPriInPrioThe integer index value corresponding to a priority value
based on the cmPrioMapV2ProfileMode.
In case of TOS and 8021P, valid indices are 0 to 7,
in case of DSCP, valid indices are 0 to 63.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.73.1.2 |
cmPrioMapV2PrioMappingPriPrioControlThis allows specification of whether the priority of
incoming X-TAG should be swapped with cmPrioMapV2XTagPriority.rw PrioMapControlType .1.3.6.1.4.1.2544.1.12.4.1.73.1.3 |
cmPrioMapV2PrioMappingPriXTagPrioThis allows specification of the VLAN priority that
will replace the incoming X-TAG's priority. This is
applicable with cmPrioMapV2XTagControl as 'swap'.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.73.1.4 |
cmPrioMapV2PrioMappingPriCOSThis allows specification of the COS Priority, i.e.
this helps in determining the appropriate COS Policer for
the Flow.rw Integer32 .1.3.6.1.4.1.2544.1.12.4.1.73.1.5 |
cmPrioMapV2ProfileAppliedObjTableA list of entries corresponding to Ethernet Priority Mappings V2 Profile AppliedObj. SEQUENCE OF CmPrioMapV2ProfileAppliedObjEntry .1.3.6.1.4.1.2544.1.12.4.1.74 |
cmPrioMapV2ProfileAppliedObjEntryA conceptual row in the cmPrioMapV2ProfileAppliedObjTable. CmPrioMapV2ProfileAppliedObjEntry .1.3.6.1.4.1.2544.1.12.4.1.74.1 |
cmPrioMapV2ProfileAppliedObjThe object describe the profile Applied to. It maybe the access port or network port or flow etc.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.74.1.1 |
cmAccPortExtTableA list of entries corresponding to Access Port for configuration purposes. SEQUENCE OF CmAccPortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.75 |
cmAccPortExtEntryA conceptual row in the cmAccPortExtTable. CmAccPortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.75.1 |
cmAccPortExtMcastRateLimitEnabledWhether multicast packets need be limited on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.75.1.1 |
cmAccPortExtMcastRateLimitSpeedLoThe rate limiting for multicast packets per port
When cmAccPortExtMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.75.1.2 |
cmAccPortExtMcastRateLimitSpeedHiThe rate limiting for multicast packets per port
When cmAccPortExtMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.75.1.3 |
cmAccPortExtBcastRateLimitEnabledWhether broadcast packets need be limited per port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.75.1.4 |
cmAccPortExtBcastRateLimitSpeedLoThe rate limiting for broadcast packets per port
When cmAccPortExtBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.75.1.5 |
cmAccPortExtBcastRateLimitSpeedHiThe rate limiting for broadcast packets per port
When cmAccPortExtBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.75.1.6 |
cmAccPortExtCombinedRateLimitEnabledWhether multicast and broadcast packets need be limited per port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.75.1.7 |
cmAccPortExtCombinedRateLimitSpeedLoThe rate limiting for multicast and broadcast packets per port.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.75.1.8 |
cmAccPortExtCombinedRateLimitSpeedHiThe rate limiting for multicast and broadcast packets per port.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.75.1.9 |
cmAccPortExtRefPrioMapProfileThis object allows to set priority map profile.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.75.1.10 |
cmNetPortExtTableA list of entries corresponding to Network Port for configuration purposes. SEQUENCE OF CmNetPortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.76 |
cmNetPortExtEntryA conceptual row in the cmNetPortExtTable. CmNetPortExtEntry .1.3.6.1.4.1.2544.1.12.4.1.76.1 |
cmNetPortExtMcastRateLimitEnabledWhether multicast packets need be limited on this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.76.1.1 |
cmNetPortExtMcastRateLimitSpeedLoThe rate limiting for multicast packets per port
When cmNetPortExtMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.76.1.2 |
cmNetPortExtMcastRateLimitSpeedHiThe rate limiting for multicast packets per port
When cmNetPortExtMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.76.1.3 |
cmNetPortExtBcastRateLimitEnabledWhether broadcast packets need be limited per port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.76.1.4 |
cmNetPortExtBcastRateLimitSpeedLoThe rate limiting for broadcast packets per port
When cmNetPortExtBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.76.1.5 |
cmNetPortExtBcastRateLimitSpeedHiThe rate limiting for broadcast packets per port
When cmNetPortExtBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.76.1.6 |
cmNetPortExtCombinedRateLimitEnabledWhether multicast and broadcast packets need be limited per port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.76.1.7 |
cmNetPortExtCombinedRateLimitSpeedLoThe rate limiting for multicast and broadcast packets per port.
This objects only represents low 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.76.1.8 |
cmNetPortExtCombinedRateLimitSpeedHiThe rate limiting for multicast and broadcast packets per port.
This objects only represents high 32 bits.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.4.1.76.1.9 |
cmNetPortExtRefPrioMapProfileThis object allows to set priority map profile.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.76.1.10 |
f3UsbWIFIDonglePortTableA list of entries corresponding to wifi dongle Port for configuration purposes. SEQUENCE OF F3UsbWIFIDonglePortEntry .1.3.6.1.4.1.2544.1.12.4.1.77 |
f3UsbWIFIDonglePortEntryA conceptual row in the f3UsbWIFIDonglePortTable. F3UsbWIFIDonglePortEntry .1.3.6.1.4.1.2544.1.12.4.1.77.1 |
f3UsbWIFIDonglePortIndexAn integer index value used to uniquely identify WIFI dongle port. Integer32 .1.3.6.1.4.1.2544.1.12.4.1.77.1.1 |
f3UsbWIFIDonglePortIfIndexThis object has the same value as ifIndex for WIFI dongle Port.
An integer index value used to uniquely identify this Portro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.4.1.77.1.2 |
f3UsbWIFIDonglePortEntityIndexEntity Index from ENTITY-MIB for this port.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.4.1.77.1.3 |
f3UsbWIFIDonglePortAdminStateThis object represents the Administrative State of this Port.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.77.1.4 |
f3UsbWIFIDonglePortOperationalStateThis object represents the Operational State of this Port.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.77.1.5 |
f3UsbWIFIDonglePortSecondaryStateThis object represents the Secondary State of this Port.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.4.1.77.1.6 |
f3UsbWIFIDonglePortSSIDThis object represents the SSID value of this port.rw DisplayString .1.3.6.1.4.1.2544.1.12.4.1.77.1.7 |
f3UsbWIFIDonglePortPasswordThis object represents the password value of this SSID.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.77.1.8 |
f3UsbWIFIDonglePortEncryptionThe encryption type of this port.rw WIFIEncryptionType .1.3.6.1.4.1.2544.1.12.4.1.77.1.9 |
f3UsbWIFIDonglePortIPAddressThe IP address of this port.rw IpAddress .1.3.6.1.4.1.2544.1.12.4.1.77.1.10 |
f3UsbWIFIDonglePortwWIFIIPNetMaskThe IP address mask of this port.rw IpAddress .1.3.6.1.4.1.2544.1.12.4.1.77.1.11 |
f3UsbWIFIDonglePortWIFIDHCPRoleThe DHCP role type of this port.ro DHCPType .1.3.6.1.4.1.2544.1.12.4.1.77.1.12 |
f3UsbWIFIDonglePortWIFIAllocatedIPFromThe start IP address could be allocated.rw IpAddress .1.3.6.1.4.1.2544.1.12.4.1.77.1.13 |
f3UsbWIFIDonglePortWIFIAllocatedIPEndThe last IP address could be allocated.rw IpAddress .1.3.6.1.4.1.2544.1.12.4.1.77.1.14 |
f3UsbWIFIDonglePortStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.77.1.15 |
f3UsbWIFIDonglePortRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3UsbWIFIDonglePortRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3UsbWIFIDonglePortRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3UsbWIFIDonglePortRowStatus object may be modified if
the associated instance of this object is equal to active(1).
Note that flow creation and deletion is only supported
with access port in connection-oriented evpl mode.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.77.1.16 |
f3UsbWIFIDonglePortAccessdUsersThe users list of accessed via WIFI dongle port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.4.1.77.1.17 |
cmFacilityConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.4.2 |
cmFacilityCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.4.2.1 |
cmFacilityGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.4.2.2 |