F3-LAG-MIB
AI MIB Summary
The F3-LAG-MIB module enables monitoring and management of IEEE 802.3ad Link Aggregation Group (LAG) operational states, port member status, and traffic counters on ADVA Optical Networking FSP150CM 5.1 products. It provides vendor-specific extensions to standard LAG metrics, allowing administrators to track aggregation session health and interface utilization within the FSP150CM platform.
This module defines the vendor specific 802.3ad LAG MIB definitions used by the FSP150CM 5.1 product lines, as extensions to the standard IEEE 802.3ad (802.3-2005). Copyright (C) ADVA Optical Networking.
Main OID:
f3LagMIB.1.3.6.1.4.1.2544.1.12.14
52
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
f3LagMIBThis module defines the vendor specific 802.3ad LAG MIB definitions used
by the FSP150CM 5.1 product lines, as extensions to the standard
IEEE 802.3ad (802.3-2005).
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.14 |
f3LagObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.14.1 |
f3LagTableA list of entries corresponding to the Link Aggregation Groups.
Entries can be created/deleted in this table by management
application action. SEQUENCE OF F3LagEntry .1.3.6.1.4.1.2544.1.12.14.1.1 |
f3LagEntryAn entry containing information applicable to a particular
security user. F3LagEntry .1.3.6.1.4.1.2544.1.12.14.1.1.1 |
f3LagIndexAn integer index value used to uniquely identify this Lag.
It should be the Lag Logical index. Integer32 .1.3.6.1.4.1.2544.1.12.14.1.1.1.1 |
f3LagIfIndexThis object has the same value as ifIndex for
LAG logical Port. An integer index value used to
uniquely identify this LAG logical Port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.12.14.1.1.1.2 |
f3LagNameThis object allows SNMP management entities to name
the LAG aggregator.rw DisplayString .1.3.6.1.4.1.2544.1.12.14.1.1.1.3 |
f3LagProtocolsWhen this object is enabled, the LACP will run as 802.3ad defines;
When this object is disabled, LACP/LAMP protocols will not run and the
LAG member port is fixed to an assigned LAG aggregator.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.1.1.4 |
f3LagLacpControlDetermines whether or not the Link Aggregation Control Protocol is enabled or disabled
for the LAG. When disabled, the LAG shall ignore LACP frames for the purpose of
selecting the active link (port) and shall select its active link (port) solely upon
the status of the LAG member links (ports). However, when disabled, the LACP protocol
shall remain active (i.e. LACP frames are transmitted when needed, etc.).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.1.1.5 |
f3LagModeDefines the LAG behavior. A LAG with mode
active-standby - exhibits 1:1 protection behavior
loadsharing - exhibits port aggregation behavior
An active-standby LAG supports 0-2 member ports. One member is in Active
role while the other is in Standby role. A loadsharing LAG can have multiple
(0-x) member ports, where x is as follows.
x = 2 for GE112Pro, GE114Pro, GE206V (Network ports only)
x = 2 for XG210 Network ports, x = 10 for XG210 Access ports
x = 4 for XG116Pro, XG120Pro (10G ports)
x = 6 for XG116Pro GE ports
x = 10 for XG120Pro GE ports
In CM Aggregation Shelf, the loadsharing LAG can have 2-8 member ports.rw AggMode .1.3.6.1.4.1.2544.1.12.14.1.1.1.6 |
f3LagCcmDefectsDetectionEnabledThis object allows for a LAG to use CCM defects DefRemoteCCM and DefRDICCM
as an indication of Signal Fail for the LAG member ports.
When enabled, a LAG member will stop carrying service frames when a
DefRemoteCCM or DefRDICCM is detected on a port level CFM DOWN MEP associated
with the LAG member port. Please note that port level CFM DOWN MEPs need
to be created on LAG member ports for this feature to work.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.1.1.7 |
f3LagStatsActionAllows the Manager to clear the LAG level statistics (f3LagStatsTable).rw CmPmBinAction (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.14.1.1.1.8 |
f3LagStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.1.1.9 |
f3LagRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3LagRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3LagRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3LagRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.1.1.10 |
f3LagIgnorePartnerColMaxDelayThis object is used to configure LAG instance to ignore Collector Max Delay
value in the received LACP PDU. Setting this value to TRUE will result in
no hold-off timer to be started, regardless of the received Collector Max
Delay value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.1.1.11 |
f3LagFrameDistAlgorithmThe frame distribution algorithm used by the LAG for transmitting frames
on the individual LAG member ports. For an active-standby LAG, this will
be active-standby. A loadsharing LAG will follow service-assignment frame
distribution. The srcdst-mac-hash method is not supported on CC-NIDS.rw LagFrameDistributionAlgorithmType .1.3.6.1.4.1.2544.1.12.14.1.1.1.12 |
f3LagDiscardWrongConversationThis object is used to control and identify whether frames received on a
LAG member port are to be discarded if the service associated with the
frame (ingress membership) does not match the service-to-link mapping of
the LAG Service Map.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.1.1.13 |
f3LagStatsTableA list of entries corresponding to the LAG statistics.
Entries cannot be created in this table by management
application action. SEQUENCE OF F3LagStatsEntry .1.3.6.1.4.1.2544.1.12.14.1.2 |
f3LagStatsEntryAn entry containing information on the LAG logical
port statistics. F3LagStatsEntry .1.3.6.1.4.1.2544.1.12.14.1.2.1 |
f3LagStatsIndexThe unique identifier to access a unique row in the f3LagStatsTable. Integer32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.1 |
f3LagStatsOctetsTxOKA count of the data and padding octets transmitted by this Aggregator on all
Aggregation Ports that are (or have been) members of the aggregation.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.2 |
f3LagStatsOctetsRxOKA count of the data and padding octets received by this Aggregator,
from the Aggregation Ports that are (or have been) members of the aggregation.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.3 |
f3LagStatsFramesTxOKA count of the data frames transmitted by this Aggregator on all Aggregation
Ports that are (or have been) members of the aggregation.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.4 |
f3LagStatsFramesRxOKA count of the data frames received by this Aggregator, from the Aggregation Ports that are
(or have been) members of the aggregation.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.5 |
f3LagStatsMulticastFramesTxOKA count of the data frames transmitted by this Aggregator on all Aggregation Ports that are
(or have been) members of the aggregation, to a group destination address other than the
broadcast address.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.6 |
f3LagStatsMulticastFramesRxOKA count of the data frames received by this Aggregator, from the Aggregation Ports that are
(or have been) members of the aggregation, that were addressed to an active group address
other than the broadcast address.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.7 |
f3LagStatsBroadcastFramesTxOKA count of the broadcast data frames transmitted by this Aggregator on all
Aggregation Ports that are (or have been) members of the aggregation.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.8 |
f3LagStatsBroadcastFramesRxOKA count of the broadcast data frames received by this Aggregator, from the
Aggregation Ports that are (or have been) members of the aggregation.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.9 |
f3LagStatsFramesWithTxErrorsA count of data frames requested to be transmitted by this Aggregator that experienced
transmission errors on ports that are (or have been) members of the aggregation.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.10 |
f3LagStatsFramesWithRxErrorsA count of data frames discarded on reception by all ports that are (or have been) members of
the aggregation, or that were discarded by the Collection function of the Aggregator, or that
were discarded by the Aggregator due to the detection of an illegal Slow Protocols PDU.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.11 |
f3LagStatsUnknownProtocolFramesA count of data frames discarded on reception by all ports that are (or have been) members of
the aggregation, due to the detection of an unknown Slow Protocols PDU.ro Counter32 .1.3.6.1.4.1.2544.1.12.14.1.2.1.12 |
f3LagPortTableA list of entries corresponding to the LAG member ports.
Entries can be created/deleted in this table by management
application action. SEQUENCE OF F3LagPortEntry .1.3.6.1.4.1.2544.1.12.14.1.3 |
f3LagPortEntryAn entry containing information applicable to a particular
security user. F3LagPortEntry .1.3.6.1.4.1.2544.1.12.14.1.3.1 |
f3LagPortIndexThe unique identifier for each Aggregation Port. Integer32 .1.3.6.1.4.1.2544.1.12.14.1.3.1.1 |
f3LagPortMemberThis is the OID of the LAG member port.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.3.1.2 |
f3LagPortLacpForceOutOfSyncA boolean value which enables or disables the port from participating as an active port
in the Link Aggregation Group, causing the link (port) to transmit OUT_OF_SYNC via LACP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.3.1.3 |
f3LagPortStateThis object can be used to show the current status of the member port.
Active: the member port is ready for transporting and is in working now.
Standby: the member port is ready for transporting, but is not working now.ro AggPortState .1.3.6.1.4.1.2544.1.12.14.1.3.1.4 |
f3LagPortStatsActionAllows the Manager to clear the LAG Port level statistics (dot3adAggPortStatsTable).rw CmPmBinAction (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.14.1.3.1.5 |
f3LagPortStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.3.1.6 |
f3LagPortRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3LagPortRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3LagPortRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3LagPortRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.3.1.7 |
f3LagServiceMapTableA list of entries corresponding to the LAG service map entry.
Entries can be created/deleted in this table by management
application action. SEQUENCE OF F3LagServiceMapEntry .1.3.6.1.4.1.2544.1.12.14.1.4 |
f3LagServiceMapEntryAn entry containing information applicable to a particular
security user. F3LagServiceMapEntry .1.3.6.1.4.1.2544.1.12.14.1.4.1 |
f3LagServiceMapIndexThe unique identifier for each entry/row in the Service Map. Integer32 .1.3.6.1.4.1.2544.1.12.14.1.4.1.1 |
f3LagServiceMapServiceObjThis is the OID of the LAG service object.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.4.1.2 |
f3LagServiceMapLinkAssignModeThe assign mode value.rw LinkAssignMode .1.3.6.1.4.1.2544.1.12.14.1.4.1.3 |
f3LagServiceMapStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.4.1.4 |
f3LagServiceMapRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3LagServiceMapRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3LagServiceMapRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3LagServiceMapRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.4.1.5 |
f3LagServiceMapMemberLinkListThe member link list value, describe by ifindex value string split with comma.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.14.1.4.1.6 |
f3LagServiceMapCurrentMemberLinkThe current member link ifindex value.ro Integer32 .1.3.6.1.4.1.2544.1.12.14.1.4.1.7 |
f3LagConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.14.2 |
f3LagCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.14.2.1 |
f3LagGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.14.2.2 |