CM-ENTITY-MIB
AI MIB Summary
The CM-ENTITY-MIB module provides vendor-specific extensions to RFC 2737 for monitoring physical and logical entity components, such as line cards, power supplies, and environmental sensors, within ADVA Optical Networking FSP150CM/CC equipment. It enables network management systems to retrieve standardized hardware inventory data and operational status metrics for these specific optical transport platforms.
This module defines the Entity MIB definitions used by the F3 (FSP150CM/CC) product lines. These definitions are vendor specific extensions to the standard ENTITY MIB (RFC2737). Copyright (C) ADVA Optical Networking.
Main OID:
cmEntityMIB.1.3.6.1.4.1.2544.1.12.3
786
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
786 total| Object Name |
|---|
cmEntityMIBThis module defines the Entity MIB definitions used by
the F3 (FSP150CM/CC) product lines. These definitions are
vendor specific extensions to the standard ENTITY MIB (RFC2737).
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.3 |
cmEntityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.3.1 |
networkElementTableEntries may be auto discovered, or can be explicitly created by
SNMP Manager. Each remotely discovered shelf is represented as
a row in this table. SEQUENCE OF NetworkElementEntry .1.3.6.1.4.1.2544.1.12.3.1.1 |
networkElementEntryA conceptual row in the networkElementTable. NetworkElementEntry .1.3.6.1.4.1.2544.1.12.3.1.1.1 |
neIndexAn arbitrary integer index value used to uniquely identify
a NetworkElement.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.1.1.1 |
neNameAn administratively-assigned name for the
Network Element. By convention, this is the node's
fully-qualified domain name.rw DisplayString .1.3.6.1.4.1.2544.1.12.3.1.1.1.2 |
neTypeType of Network Element.rw NetworkElementType .1.3.6.1.4.1.2544.1.12.3.1.1.1.3 |
neContactThe textual identification of the contact person
for the Network Element, together with information
on how to contact this person.rw DisplayString .1.3.6.1.4.1.2544.1.12.3.1.1.1.4 |
neLocationThe physical location of this node (e.g.,
`telephone closet, 3rd floor').rw DisplayString .1.3.6.1.4.1.2544.1.12.3.1.1.1.5 |
neDescriptionA textual description of the Network Element. This value
should include the full name and version
identification of the system's hardware type,
software operating-system, and networking
software. It is mandatory that this only contain
printable ASCII characters.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.1.1.6 |
neCmdPromptPrefixUser specified command prompt prefix, used by the CLI,
at the Network Element level.rw DisplayString .1.3.6.1.4.1.2544.1.12.3.1.1.1.7 |
neAcceptedIndicates whether or not the Network Element is accepted or not.
When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm',
NetworkElement's are discovered with this object as 'false'.
User must invoke the 'accept' action on neProvAction object
to accept the NetworkElement.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.1.1.8 |
neFromPortThe Network Element port to which this
Network Element is connected.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.1.1.9 |
neProvActionWhen the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm',
NetworkElement's are discovered with 'neAccepted'
object as 'false'.
User must invoke the 'accept' action on this object
to accept the NetworkElement. User can invoke the 'decline'
action on this object to decline the NetworkElement.rw NeProvAction .1.3.6.1.4.1.2544.1.12.3.1.1.1.10 |
neStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.1.1.11 |
neRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of neRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
neRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The neRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.1.1.12 |
neAutoProvModeAutoprovisioning mode which controls automatic creation of cards plugged
into the slots of Network Element.
Supported values are off(1) and auto(3). When neAutoProvMode is auto then
the cards inserted into the slots of Network Element will be automatically
provisioned. When neAutoProvMode is off no auto-provisioning will occur.rw CmAutoProvMode (CM-SYSTEM-MIB) .1.3.6.1.4.1.2544.1.12.3.1.1.1.13 |
neFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the Network Element level.
Value of this objec is propagated to all the cards beloning to the Network Element.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.1.1.14 |
shelfTableContains information on shelf within the NetworkElement.
In the case of FSP150CM, there is a single shelf for each
NetworkElement. SEQUENCE OF ShelfEntry .1.3.6.1.4.1.2544.1.12.3.1.2 |
shelfEntryA conceptual row in the shelfTable. ShelfEntry .1.3.6.1.4.1.2544.1.12.3.1.2.1 |
shelfIndexAn integer index value used to uniquely identify a Shelf
within a NetworkElement.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.2.1.1 |
shelfEntityIndexEntity Index from ENTITY-MIB for this shelf.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.2.1.2 |
shelfTypeShelf Type of the shelf.rw ShelfType .1.3.6.1.4.1.2544.1.12.3.1.2.1.3 |
shelfbackplaneRevThe backplane revision number.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.2.1.4 |
shelfbackplaneDOMBackplane Date of Manufacture.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.2.1.5 |
shelfbackplaneSerialNoBackplane Serial Number.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.2.1.6 |
shelfActionInvoke action on the shelf, such as lamp test.rw ShelfAction .1.3.6.1.4.1.2544.1.12.3.1.2.1.7 |
shelfAdminStateAdministrative State of the Shelf.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.2.1.8 |
shelfOperationalStateOperational State of the Shelf.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.2.1.9 |
shelfSecondaryStateSecondary State of the Shelf.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.2.1.10 |
shelfMfgSiteThis is the shelf's Manufacturer site.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.2.1.11 |
shelfOscillatorTypeThe mOscillatorType.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.2.1.12 |
slotTableContains information on slot within the Shelf. SEQUENCE OF SlotEntry .1.3.6.1.4.1.2544.1.12.3.1.3 |
slotEntryA conceptual row in the slotTable. SlotEntry .1.3.6.1.4.1.2544.1.12.3.1.3.1 |
slotIndexThe actual physical slot index that uniquely identify
a Slot within a shelf. Slot number 255 is used to indicate system level entities.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.3.1.1 |
slotEntityIndexEntity Index from ENTITY-MIB for this slot.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.3.1.2 |
slotTypeSlot Type of the slot. 'generic' slots can hold NEMI card
as well as line cards.ro SlotType .1.3.6.1.4.1.2544.1.12.3.1.3.1.3 |
slotCardTypeCard Type of the slot.ro CardType .1.3.6.1.4.1.2544.1.12.3.1.3.1.4 |
slotCardUnitNameThis is the inserted card's unit name.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.5 |
slotCardFormatVersionThis is the inserted card's format version.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.6 |
slotCardCLEICodeThis is the inserted card's CLEI code.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.7 |
slotCardPartNumberThis is the inserted card's Part Number.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.8 |
slotCardHwRevThis is the inserted card's Hardware Revision.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.9 |
slotCardSwRevThis is the inserted card's Software Revision.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.10 |
slotCardSerialNumThis is the inserted card's Serial Number.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.11 |
slotCardMfgNameThis is the inserted card's Manufacturer Name.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.12 |
slotCardMfgDateThis is the inserted card's Manufacturer date.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.3.1.13 |
slotCardMfgSiteThis is the inserted card's Manufacturer site.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.14 |
slotSecondaryStateSecondary State of the Slot.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.3.1.15 |
slotCardPhysicalAddressThis is the inserted card's MAC Address, if applicable.ro DisplayString .1.3.6.1.4.1.2544.1.12.3.1.3.1.16 |
psuTableContains information on Power Supply Units within the Shelf. SEQUENCE OF PsuEntry .1.3.6.1.4.1.2544.1.12.3.1.4 |
psuEntryA conceptual row in the psuTable. PsuEntry .1.3.6.1.4.1.2544.1.12.3.1.4.1 |
psuEntityIndexEntity Index from ENTITY-MIB for this PSU.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.4.1.1 |
psuTypePSU Type of the PSU.ro PsuType .1.3.6.1.4.1.2544.1.12.3.1.4.1.2 |
psuAdminStateAdministrative State of the PSU.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.4.1.3 |
psuOperationalStateOperational State of the PSU.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.4.1.4 |
psuSecondaryStateSecondary State of the PSU.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.4.1.5 |
psuOutputVoltageOutput Voltage of the PSU.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.4.1.6 |
psuTemperatureTemperature of the PSU.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.4.1.7 |
psuOutputCurrentOutput Current of the PSU.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.4.1.8 |
psuStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.4.1.9 |
psuRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of psuRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
psuRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The psuRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.4.1.10 |
fanTableContains information on FANs within the Shelf. SEQUENCE OF FanEntry .1.3.6.1.4.1.2544.1.12.3.1.5 |
fanEntryA conceptual row in the fanTable. FanEntry .1.3.6.1.4.1.2544.1.12.3.1.5.1 |
fanEntityIndexEntity Index from ENTITY-MIB for this FAN.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.5.1.1 |
fanAdminStateAdministrative State of the FAN.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.5.1.2 |
fanOperationalStateOperational State of the FAN.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.5.1.3 |
fanSecondaryStateSecondary State of the FAN.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.5.1.4 |
fanStorageTypeStorage Type of the FAN.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.5.1.5 |
fanRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described in the description
clause for each writable object.
The values of fanRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
fanRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The fanRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.5.1.6 |
scuTableContains information on SCU within the Shelf. SEQUENCE OF ScuEntry .1.3.6.1.4.1.2544.1.12.3.1.6 |
scuEntryA conceptual row in the scuTable. ScuEntry .1.3.6.1.4.1.2544.1.12.3.1.6.1 |
scuEntityIndexEntity Index from ENTITY-MIB for the SCU card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.6.1.1 |
scuAdminStateAdministrative State of the SCU.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.6.1.2 |
scuOperationalStateOperational State of the SCU.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.6.1.3 |
scuSecondaryStateSecondary State of the SCU.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.6.1.4 |
scuVoltageVoltage of the SCU.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.6.1.5 |
scuTemperatureTemperature of the SCU.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.6.1.6 |
scuRestartActionAllows to perform specified action on the SCU card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.6.1.7 |
scuStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.6.1.8 |
scuRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of scuRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
scuRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The scuRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.6.1.9 |
scuFlashModelNumThis provides the Compact Flash Model Number on the SCU card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.6.1.10 |
scuFlashFirmwareRevThis provides the Compact Flash Firmware Revision on the SCU card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.6.1.11 |
scuFlashSerialNumThis provides the Compact Flash Serial Number on the SCU card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.6.1.12 |
nemiTableContains information on NEMI within the Shelf. SEQUENCE OF NemiEntry .1.3.6.1.4.1.2544.1.12.3.1.7 |
nemiEntryA conceptual row in the nemiTable. NemiEntry .1.3.6.1.4.1.2544.1.12.3.1.7.1 |
nemiEntityIndexEntity Index from ENTITY-MIB for the NEMI card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.7.1.1 |
nemiAdminStateAdministrative State of the NEMI.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.7.1.2 |
nemiOperationalStateOperational State of the NEMI.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.7.1.3 |
nemiSecondaryStateSecondary State of the NEMI.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.7.1.4 |
nemiVoltageVoltage of the NEMI.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.7.1.5 |
nemiTemperatureTemperature of the NEMI.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.7.1.6 |
nemiRestartActionAllows to perform specified action on the NEMI card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.7.1.7 |
nemiStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.7.1.8 |
nemiRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of nemiRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
nemiRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The nemiRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.7.1.9 |
nemiForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.7.1.10 |
nemiFlashModelNumThis provides the Flash Model Number on the NEMI card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.7.1.11 |
nemiFlashFirmwareRevThis provides the Flash Firmware Revision on the NEMI card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.7.1.12 |
nemiFlashSerialNumThis provides the Flash Serial Number on the NEMI card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.7.1.13 |
ethernetNTUCardTableContains information on Ethernet NTU Cards within the Shelf.
These cards support 10M, 100M and 1G Ethernet Interfaces. SEQUENCE OF EthernetNTUCardEntry .1.3.6.1.4.1.2544.1.12.3.1.8 |
ethernetNTUCardEntryA conceptual row in the ethernetNTUCardTable. EthernetNTUCardEntry .1.3.6.1.4.1.2544.1.12.3.1.8.1 |
ethernetNTUCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTU Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.8.1.1 |
ethernetNTUCardAdminStateAdministrative State of the Ethernet NTU Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.8.1.2 |
ethernetNTUCardOperationalStateOperational State of the Ethernet NTU Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.8.1.3 |
ethernetNTUCardSecondaryStateSecondary State of the Ethernet NTU Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.8.1.4 |
ethernetNTUCardVoltageVoltage of the Ethernet NTU Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.8.1.5 |
ethernetNTUCardTemperatureTemperature of the Ethernet NTU Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.8.1.6 |
ethernetNTUCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTU Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.8.1.7 |
ethernetNTUCardRestartActionAllows to perform specified action on the Ethernet NTU card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.8.1.8 |
ethernetNTUCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.8.1.9 |
ethernetNTUCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetNTUCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetNTUCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetNTUCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.8.1.10 |
ethernetCPMRCardTableContains information on Ethernet CPMR Cards within the Shelf. SEQUENCE OF EthernetCPMRCardEntry .1.3.6.1.4.1.2544.1.12.3.1.9 |
ethernetCPMRCardEntryA conceptual row in the ethernetCPMRCardTable. EthernetCPMRCardEntry .1.3.6.1.4.1.2544.1.12.3.1.9.1 |
ethernetCPMRCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet CPMR Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.1 |
ethernetCPMRCardAdminStateAdministrative State of the Ethernet CPMR Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.2 |
ethernetCPMRCardOperationalStateOperational State of the Ethernet CPMR Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.3 |
ethernetCPMRCardSecondaryStateSecondary State of the Ethernet CPMR Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.4 |
ethernetCPMRCardVoltageVoltage of the Ethernet CPMR Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.9.1.5 |
ethernetCPMRCardTemperatureTemperature of the Ethernet CPMR Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.9.1.6 |
ethernetCPMRCardRestartActionAllows to perform specified action on the Ethernet CPMR card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.7 |
ethernetCPMRCardPSU1StateOperational State of Power Supply Unit 1 on Ethernet CPMR chassis.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.8 |
ethernetCPMRCardPSU2StateOperational State of Power Supply Unit 2 on Ethernet CPMR chassis.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.9 |
ethernetCPMRCardFAN1StateOperational State of FAN 1 on Ethernet CPMR chassis.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.10 |
ethernetCPMRCardFAN2StateOperational State of FAN 2 on Ethernet CPMR chassis.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.9.1.11 |
ethernetCPMRCardPsuTypePSU Type on Ethernet CPMR chassis.ro PsuType .1.3.6.1.4.1.2544.1.12.3.1.9.1.12 |
ethernetCPMRCardLLFModeCurrent Link Loss Forwarding Mode on CPMR.ro CmCPMRLinkLossFwdMode .1.3.6.1.4.1.2544.1.12.3.1.9.1.13 |
ethernetCPMRCardLLFModeActionOperation to set the appropriate mode on CPMR.rw CmCPMRLinkLossFwdMode .1.3.6.1.4.1.2544.1.12.3.1.9.1.14 |
ethernetNTEGE101CardTableContains information on Ethernet NTE GE101 Cards.
These are supported on the FSP150CC GE101 product. SEQUENCE OF EthernetNTEGE101CardEntry .1.3.6.1.4.1.2544.1.12.3.1.10 |
ethernetNTEGE101CardEntryA conceptual row in the ethernetNTEGE101CardTable. EthernetNTEGE101CardEntry .1.3.6.1.4.1.2544.1.12.3.1.10.1 |
ethernetNTEGE101CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE101 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.10.1.1 |
ethernetNTEGE101CardAdminStateAdministrative State of the Ethernet NTE GE101 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.10.1.2 |
ethernetNTEGE101CardOperationalStateOperational State of the Ethernet NTE GE101 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.10.1.3 |
ethernetNTEGE101CardSecondaryStateSecondary State of the Ethernet NTE GE101 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.10.1.4 |
ethernetNTEGE101CardVoltageVoltage of the Ethernet NTE GE101 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.10.1.5 |
ethernetNTEGE101CardTemperatureTemperature of the Ethernet NTE GE101 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.10.1.6 |
ethernetNTEGE101CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE101 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.10.1.7 |
ethernetNTEGE101CardRestartActionAllows to perform specified action on the Ethernet NTE GE101 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.10.1.8 |
ethernetNTEGE206CardTableContains information on Ethernet NTE GE206 Cards.
These are supported on the FSP150CC GE206 product. SEQUENCE OF EthernetNTEGE206CardEntry .1.3.6.1.4.1.2544.1.12.3.1.11 |
ethernetNTEGE206CardEntryA conceptual row in the ethernetNTEGE206CardTable. EthernetNTEGE206CardEntry .1.3.6.1.4.1.2544.1.12.3.1.11.1 |
ethernetNTEGE206CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE206 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.11.1.1 |
ethernetNTEGE206CardAdminStateAdministrative State of the Ethernet NTE GE206 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.11.1.2 |
ethernetNTEGE206CardOperationalStateOperational State of the Ethernet NTE GE206 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.11.1.3 |
ethernetNTEGE206CardSecondaryStateSecondary State of the Ethernet NTE GE206 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.11.1.4 |
ethernetNTEGE206CardVoltageVoltage of the Ethernet NTE GE206 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.11.1.5 |
ethernetNTEGE206CardTemperatureTemperature of the Ethernet NTE GE206 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.11.1.6 |
ethernetNTEGE206CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE206 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.11.1.7 |
ethernetNTEGE206CardRestartActionAllows to perform specified action on the Ethernet NTE GE206 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.11.1.8 |
ethernetNTEGE206CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.11.1.9 |
pseudoWireE3CardTableContains information on Pseudo Wire E3 (Emulation Edge to Edge) Cards.
These are supported on the FSP150CC GE206 product.obsolete SEQUENCE OF PseudoWireE3CardEntry .1.3.6.1.4.1.2544.1.12.3.1.12 |
pseudoWireE3CardEntryA conceptual row in the pseudoWireE3CardTable.obsolete PseudoWireE3CardEntry .1.3.6.1.4.1.2544.1.12.3.1.12.1 |
pseudoWireE3CardEntityIndexEntity Index from ENTITY-MIB for the Pseudo Wire E3 Card.roobsolete PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.12.1.1 |
pseudoWireE3CardAdminStateAdministrative State of the Pseudo Wire E3 Card.rwobsolete AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.12.1.2 |
pseudoWireE3CardOperationalStateOperational State of the Pseudo Wire E3 Card.roobsolete OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.12.1.3 |
pseudoWireE3CardSecondaryStateSecondary State of the Pseudo Wire E3 Card.roobsolete SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.12.1.4 |
pseudoWireE3CardIpAddressExternal management IP Address of the Pseudo Wire E3 Card.rwobsolete IpAddress .1.3.6.1.4.1.2544.1.12.3.1.12.1.5 |
pseudoWireE3CardIpNetmaskExternal management IP Net mask of the Pseudo Wire E3 Card.rwobsolete IpAddress .1.3.6.1.4.1.2544.1.12.3.1.12.1.6 |
pseudoWireE3CardIpGatewayExternal management IP Gateway of the Pseudo Wire E3 Card.rwobsolete IpAddress .1.3.6.1.4.1.2544.1.12.3.1.12.1.7 |
pseudoWireE3CardDhcpEnabledExternal management - whether DHCP is enabled.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.12.1.8 |
pseudoWireE3CardMgmtVlanIdExternal management VLAN Id for the Pseudo Wire E3 Card.rwobsolete VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.12.1.9 |
pseudoWireE3CardTimeOfDayTime of day for the Pseudo Wire E3 Card.rwobsolete DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.12.1.10 |
pseudoWireE3CardRestartActionAllows to perform restart action on the Pseudo Wire E3 card.rwobsolete RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.12.1.11 |
scuTTableContains information on SCU-T within the Shelf. SEQUENCE OF ScuTEntry .1.3.6.1.4.1.2544.1.12.3.1.13 |
scuTEntryA conceptual row in the scuTTable. ScuTEntry .1.3.6.1.4.1.2544.1.12.3.1.13.1 |
scuTEntityIndexEntity Index from ENTITY-MIB for the SCU-T card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.13.1.1 |
scuTAdminStateAdministrative State of the SCU-T.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.13.1.2 |
scuTOperationalStateOperational State of the SCU-T.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.13.1.3 |
scuTSecondaryStateSecondary State of the SCU-T.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.13.1.4 |
scuTVoltageVoltage of the SCU-T.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.13.1.5 |
scuTTemperatureTemperature of the SCU-T.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.13.1.6 |
scuTRestartActionAllows to perform specified action on the SCU-T card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.13.1.7 |
scuTStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.13.1.8 |
scuTRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of scuTRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
neRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The scuTRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.13.1.9 |
ethernetNTECardTableContains information on Ethernet NTE Cards within the Shelf.
These cards support 10M, 100M and 1G Ethernet Interfaces. SEQUENCE OF EthernetNTECardEntry .1.3.6.1.4.1.2544.1.12.3.1.14 |
ethernetNTECardEntryA conceptual row in the ethernetNTECardTable. EthernetNTECardEntry .1.3.6.1.4.1.2544.1.12.3.1.14.1 |
ethernetNTECardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.14.1.1 |
ethernetNTECardAdminStateAdministrative State of the Ethernet NTE Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.14.1.2 |
ethernetNTECardOperationalStateOperational State of the Ethernet NTE Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.14.1.3 |
ethernetNTECardSecondaryStateSecondary State of the Ethernet NTE Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.14.1.4 |
ethernetNTECardVoltageVoltage of the Ethernet NTE Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.14.1.5 |
ethernetNTECardTemperatureTemperature of the Ethernet NTE Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.14.1.6 |
ethernetNTECardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.14.1.7 |
ethernetNTECardRestartActionAllows to perform specified action on the Ethernet NTE card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.14.1.8 |
ethernetNTECardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.14.1.9 |
ethernetNTECardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetNTECardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetNTECardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetNTECardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.14.1.10 |
ethernetNTEGE201CardTableContains information on Ethernet NTE GE201 Cards.
These are supported on the FSP150CC GE201 product. SEQUENCE OF EthernetNTEGE201CardEntry .1.3.6.1.4.1.2544.1.12.3.1.15 |
ethernetNTEGE201CardEntryA conceptual row in the ethernetNTEGE201CardTable. EthernetNTEGE201CardEntry .1.3.6.1.4.1.2544.1.12.3.1.15.1 |
ethernetNTEGE201CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE201 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.15.1.1 |
ethernetNTEGE201CardAdminStateAdministrative State of the Ethernet NTE GE201 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.15.1.2 |
ethernetNTEGE201CardOperationalStateOperational State of the Ethernet NTE GE201 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.15.1.3 |
ethernetNTEGE201CardSecondaryStateSecondary State of the Ethernet NTE GE201 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.15.1.4 |
ethernetNTEGE201CardVoltageVoltage of the Ethernet NTE GE201 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.15.1.5 |
ethernetNTEGE201CardTemperatureTemperature of the Ethernet NTE GE201 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.15.1.6 |
ethernetNTEGE201CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE201 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.15.1.7 |
ethernetNTEGE201CardRestartActionAllows to perform specified action on the Ethernet NTE GE201 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.15.1.8 |
ethernetNTEGE201CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.15.1.9 |
ethernetNTEGE201SyncECardTableContains information on Ethernet NTE GE201SyncE Cards.
These are supported on the FSP150CC GE201SyncE product. SEQUENCE OF EthernetNTEGE201SyncECardEntry .1.3.6.1.4.1.2544.1.12.3.1.16 |
ethernetNTEGE201SyncECardEntryA conceptual row in the ethernetNTEGE201SyncECardTable. EthernetNTEGE201SyncECardEntry .1.3.6.1.4.1.2544.1.12.3.1.16.1 |
ethernetNTEGE201SyncECardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE201SyncE Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.16.1.1 |
ethernetNTEGE201SyncECardAdminStateAdministrative State of the Ethernet NTE GE201SyncE Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.16.1.2 |
ethernetNTEGE201SyncECardOperationalStateOperational State of the Ethernet NTE GE201SyncE Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.16.1.3 |
ethernetNTEGE201SyncECardSecondaryStateSecondary State of the Ethernet NTE GE201SyncE Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.16.1.4 |
ethernetNTEGE201SyncECardVoltageVoltage of the Ethernet NTE GE201SyncE Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.16.1.5 |
ethernetNTEGE201SyncECardTemperatureTemperature of the Ethernet NTE GE201SyncE Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.16.1.6 |
ethernetNTEGE201SyncECardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE201SyncE Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.16.1.7 |
ethernetNTEGE201SyncECardRestartActionAllows to perform specified action on the Ethernet NTE GE201SyncE card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.16.1.8 |
ethernetNTEGE201SyncECardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.16.1.9 |
ethernetNTEGE206FCardTableContains information on Ethernet NTE GE206F Cards.
These are supported on the FSP150CC GE206 product. SEQUENCE OF EthernetNTEGE206FCardEntry .1.3.6.1.4.1.2544.1.12.3.1.17 |
ethernetNTEGE206FCardEntryA conceptual row in the ethernetNTEGE206FCardTable. EthernetNTEGE206FCardEntry .1.3.6.1.4.1.2544.1.12.3.1.17.1 |
ethernetNTEGE206FCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE206 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.17.1.1 |
ethernetNTEGE206FCardAdminStateAdministrative State of the Ethernet NTE GE206 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.17.1.2 |
ethernetNTEGE206FCardOperationalStateOperational State of the Ethernet NTE GE206 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.17.1.3 |
ethernetNTEGE206FCardSecondaryStateSecondary State of the Ethernet NTE GE206 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.17.1.4 |
ethernetNTEGE206FCardVoltageVoltage of the Ethernet NTE GE206 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.17.1.5 |
ethernetNTEGE206FCardTemperatureTemperature of the Ethernet NTE GE206 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.17.1.6 |
ethernetNTEGE206FCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE206 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.17.1.7 |
ethernetNTEGE206FCardRestartActionAllows to perform specified action on the Ethernet NTE GE206 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.17.1.8 |
ethernetNTEGE206FCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.17.1.9 |
ethernet1x10GCardTableContains information on Ethernet 1x10G Cards. SEQUENCE OF Ethernet1x10GCardEntry .1.3.6.1.4.1.2544.1.12.3.1.18 |
ethernet1x10GCardEntryA conceptual row in the ethernet1x10GCardTable. Ethernet1x10GCardEntry .1.3.6.1.4.1.2544.1.12.3.1.18.1 |
ethernet1x10GCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet 1x10G Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.18.1.1 |
ethernet1x10GCardAdminStateAdministrative State of the Ethernet 1x10G Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.18.1.2 |
ethernet1x10GCardOperationalStateOperational State of the Ethernet 1x10G Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.18.1.3 |
ethernet1x10GCardSecondaryStateSecondary State of the Ethernet 1x10G Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.18.1.4 |
ethernet1x10GCardTemperatureTemperature of the Ethernet 1x10G Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.18.1.5 |
ethernet1x10GCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet 1x10G Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.18.1.6 |
ethernet1x10GCardRestartActionAllows to perform specified action on the Ethernet 1x10G card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.18.1.7 |
ethernet1x10GCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.18.1.8 |
ethernet1x10GCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernet1x10GCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetNTUCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernet1x10GCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.18.1.9 |
ethernet1x10GCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.18.1.10 |
ethernet10x1GCardTableContains information on Ethernet 10x1G Cards. SEQUENCE OF Ethernet10x1GCardEntry .1.3.6.1.4.1.2544.1.12.3.1.19 |
ethernet10x1GCardEntryA conceptual row in the ethernet10x1GCardTable. Ethernet10x1GCardEntry .1.3.6.1.4.1.2544.1.12.3.1.19.1 |
ethernet10x1GCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet 10x1G Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.19.1.1 |
ethernet10x1GCardAdminStateAdministrative State of the Ethernet 10x1G Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.19.1.2 |
ethernet10x1GCardOperationalStateOperational State of the Ethernet 10x1G Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.19.1.3 |
ethernet10x1GCardSecondaryStateSecondary State of the Ethernet 10x1G Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.19.1.4 |
ethernet10x1GCardTemperatureTemperature of the Ethernet 10x1G Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.19.1.5 |
ethernet10x1GCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet 10x1G Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.19.1.6 |
ethernet10x1GCardRestartActionAllows to perform specified action on the Ethernet 10x1G card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.19.1.7 |
ethernet10x1GCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.19.1.8 |
ethernet10x1GCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernet10x1GCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernet10x1GCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernet10x1GCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.19.1.9 |
ethernet10x1GCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.19.1.10 |
ethernetSWFCardTableContains information on Ethernet SWF Cards. SEQUENCE OF EthernetSWFCardEntry .1.3.6.1.4.1.2544.1.12.3.1.20 |
ethernetSWFCardEntryA conceptual row in the ethernetSWFCardTable. EthernetSWFCardEntry .1.3.6.1.4.1.2544.1.12.3.1.20.1 |
ethernetSWFCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet SWF Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.20.1.1 |
ethernetSWFCardAdminStateAdministrative State of the Ethernet SWF Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.20.1.2 |
ethernetSWFCardOperationalStateOperational State of the Ethernet SWF Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.20.1.3 |
ethernetSWFCardSecondaryStateSecondary State of the Ethernet SWF Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.20.1.4 |
ethernetSWFCardTemperatureTemperature of the Ethernet SWF Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.20.1.5 |
ethernetSWFCardRestartActionAllows to perform specified action on the Ethernet SWF card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.20.1.6 |
ethernetSWFCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.20.1.7 |
ethernetSWFCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetSWFCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetNTUCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetSWFCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.20.1.8 |
ethernetSWFCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.20.1.9 |
stuCardTableContains information on STU Cards. SEQUENCE OF StuCardEntry .1.3.6.1.4.1.2544.1.12.3.1.21 |
stuCardEntryA conceptual row in the stuCardTable. StuCardEntry .1.3.6.1.4.1.2544.1.12.3.1.21.1 |
stuCardEntityIndexEntity Index from ENTITY-MIB for the STU Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.21.1.1 |
stuCardAdminStateAdministrative State of the Stu Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.21.1.2 |
stuCardOperationalStateOperational State of the Stu Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.21.1.3 |
stuCardSecondaryStateSecondary State of the Stu Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.21.1.4 |
stuCardTemperatureTemperature of the Stu Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.21.1.5 |
stuCardRestartActionAllows to perform specified action on the Stu card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.21.1.6 |
stuCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.21.1.7 |
stuCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of stuCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
stuRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The stuCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.21.1.8 |
stuCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.21.1.9 |
amiTableContains information on AMI within the Shelf. SEQUENCE OF AmiEntry .1.3.6.1.4.1.2544.1.12.3.1.22 |
amiEntryA conceptual row in the amiTable. AmiEntry .1.3.6.1.4.1.2544.1.12.3.1.22.1 |
amiEntityIndexEntity Index from ENTITY-MIB for the AMI card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.22.1.1 |
amiAdminStateAdministrative State of the AMI.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.22.1.2 |
amiOperationalStateOperational State of the AMI.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.22.1.3 |
amiSecondaryStateSecondary State of the AMI.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.22.1.4 |
amiTemperatureTemperature of the AMI.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.22.1.5 |
amiRestartActionAllows to perform specified action on the AMI card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.22.1.6 |
stiTableContains information on STI within the Shelf. SEQUENCE OF StiEntry .1.3.6.1.4.1.2544.1.12.3.1.23 |
stiEntryA conceptual row in the stiTable. StiEntry .1.3.6.1.4.1.2544.1.12.3.1.23.1 |
stiEntityIndexEntity Index from ENTITY-MIB for the STI card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.23.1.1 |
stiAdminStateAdministrative State of the STI.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.23.1.2 |
stiOperationalStateOperational State of the STI.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.23.1.3 |
stiSecondaryStateSecondary State of the STI.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.23.1.4 |
stiTemperatureTemperature of the STI.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.23.1.5 |
stiStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.23.1.6 |
stiRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of stiRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
stiRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The stiRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.23.1.7 |
f3UsbHostTableContains information on Usb Host. SEQUENCE OF F3UsbHostEntry .1.3.6.1.4.1.2544.1.12.3.1.24 |
f3UsbHostEntryA conceptual row in the f3UsbHostTable. F3UsbHostEntry .1.3.6.1.4.1.2544.1.12.3.1.24.1 |
f3UsbHostIndexThe actual physical usb host index that uniquely identify
a usb host.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.24.1.1 |
f3UsbHostEntityIndexEntity Index from ENTITY-MIB for the usb host.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.24.1.2 |
f3UsbHostUnitNameThis is the inserted usb device's unit name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.3 |
f3UsbHostFormatVersionThis is the inserted usb device's format version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.4 |
f3UsbHostCLEICodeThis is the inserted usb device's CLEI code.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.5 |
f3UsbHostPartNumberThis is the inserted usb device's Part Number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.6 |
f3UsbHostHwRevThis is the inserted usb device's Hardware Revision.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.7 |
f3UsbHostSwRevThis is the inserted usb device's Software Revision.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.8 |
f3UsbHostSerialNumThis is the inserted usb device's Serial Number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.9 |
f3UsbHostMfgNameThis is the inserted usb device's Manufacturer Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.10 |
f3UsbHostMfgDateThis is the inserted usb device's Manufacturer date.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.11 |
f3UsbHostMfgSiteThis is the inserted usb device's Manufacturer site.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.12 |
f3UsbHostSecondaryStateSecondary State of the usb device.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.24.1.13 |
f3UsbHostPhysicalAddressThis is the inserted usb device's MAC Address, if applicable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.24.1.14 |
ethernetNTEGE112CardTableContains information on Ethernet NTE GE112 Cards.
These are supported on the FSP150CC GE112 product. SEQUENCE OF EthernetNTEGE112CardEntry .1.3.6.1.4.1.2544.1.12.3.1.25 |
ethernetNTEGE112CardEntryA conceptual row in the ethernetNTEGE112CardTable. EthernetNTEGE112CardEntry .1.3.6.1.4.1.2544.1.12.3.1.25.1 |
ethernetNTEGE112CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.25.1.1 |
ethernetNTEGE112CardAdminStateAdministrative State of the Ethernet NTE GE112 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.25.1.2 |
ethernetNTEGE112CardOperationalStateOperational State of the Ethernet NTE GE112 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.25.1.3 |
ethernetNTEGE112CardSecondaryStateSecondary State of the Ethernet NTE GE112 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.25.1.4 |
ethernetNTEGE112CardVoltageVoltage of the Ethernet NTE GE112 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.25.1.5 |
ethernetNTEGE112CardTemperatureTemperature of the Ethernet NTE GE112 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.25.1.6 |
ethernetNTEGE112CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE112 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.25.1.7 |
ethernetNTEGE112CardRestartActionAllows to perform specified action on the Ethernet NTE GE112 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.25.1.8 |
ethernetNTEGE112CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.25.1.9 |
ethernetNTEGE112CardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE112 card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.25.1.10 |
ethernetNTEGE112CardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE112 card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.25.1.11 |
ethernetNTEGE114CardTableContains information on Ethernet NTE GE114 Cards.
These are supported on the FSP150CC GE114 product. SEQUENCE OF EthernetNTEGE114CardEntry .1.3.6.1.4.1.2544.1.12.3.1.26 |
ethernetNTEGE114CardEntryA conceptual row in the ethernetNTEGE114CardTable. EthernetNTEGE114CardEntry .1.3.6.1.4.1.2544.1.12.3.1.26.1 |
ethernetNTEGE114CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE114 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.26.1.1 |
ethernetNTEGE114CardAdminStateAdministrative State of the Ethernet NTE GE114 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.26.1.2 |
ethernetNTEGE114CardOperationalStateOperational State of the Ethernet NTE GE114 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.26.1.3 |
ethernetNTEGE114CardSecondaryStateSecondary State of the Ethernet NTE GE114 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.26.1.4 |
ethernetNTEGE114CardVoltageVoltage of the Ethernet NTE GE112 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.26.1.5 |
ethernetNTEGE114CardTemperatureTemperature of the Ethernet NTE GE114 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.26.1.6 |
ethernetNTEGE114CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.26.1.7 |
ethernetNTEGE114CardRestartActionAllows to perform specified action on the Ethernet NTE GE114 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.26.1.8 |
ethernetNTEGE114CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.26.1.9 |
ethernetNTEGE114CardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114 card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.26.1.10 |
ethernetNTEGE114CardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114 card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.26.1.11 |
ethernetNTEGE206VCardTableContains information on Ethernet NTE GE206V Cards.
These are supported on the FSP150CC GE206V product. SEQUENCE OF EthernetNTEGE206VCardEntry .1.3.6.1.4.1.2544.1.12.3.1.27 |
ethernetNTEGE206VCardEntryA conceptual row in the ethernetNTEGE206VCardTable. EthernetNTEGE206VCardEntry .1.3.6.1.4.1.2544.1.12.3.1.27.1 |
ethernetNTEGE206VCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE206V Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.27.1.1 |
ethernetNTEGE206VCardAdminStateAdministrative State of the Ethernet NTE GE206V Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.27.1.2 |
ethernetNTEGE206VCardOperationalStateOperational State of the Ethernet NTE GE206V Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.27.1.3 |
ethernetNTEGE206VCardSecondaryStateSecondary State of the Ethernet NTE GE206V Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.27.1.4 |
ethernetNTEGE206VCardVoltageVoltage of the Ethernet NTE GE206V Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.27.1.5 |
ethernetNTEGE206VCardTemperatureTemperature of the Ethernet NTE GE206V Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.27.1.6 |
ethernetNTEGE206VCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE206V Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.27.1.7 |
ethernetNTEGE206VCardRestartActionAllows to perform specified action on the Ethernet NTE GE206V card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.27.1.8 |
ethernetNTEGE206VCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the
card level. This applies to all monitored PM entities.
The default value of this attribute is interval-15min.
Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered
fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.27.1.9 |
ethernetGE4SCCCardTableContains information on Ethernet GE206V Optical Port Expander Cards.
These are supported on the FSP150CC GE206V product. SEQUENCE OF EthernetGE4SCCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.28 |
ethernetGE4SCCCardEntryA conceptual row in the ethernetGE4SCCCardTable. EthernetGE4SCCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.28.1 |
ethernetGE4SCCCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.28.1.1 |
ethernetGE4SCCCardAdminStateAdministrative State of the Ethernet GE-4S Connector Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.28.1.2 |
ethernetGE4SCCCardOperationalStateOperational State of the Ethernet GE-4S Connector Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.28.1.3 |
ethernetGE4SCCCardSecondaryStateSecondary State of the Ethernet GE-4S Connector Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.28.1.4 |
ethernetGE4SCCCardVoltageVoltage of the Ethernet GE-4S Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.28.1.5 |
ethernetGE4SCCCardTemperatureTemperature of the Ethernet GE-4S Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.28.1.6 |
ethernetGE4SCCCardRestartActionAllows to perform specified action on the
Ethernet GE-4S Connector card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.28.1.7 |
ethernetGE4SCCCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.28.1.8 |
ethernetGE4SCCCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetGE4SCCCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetGE4SCCCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetGE4SCCCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.28.1.9 |
ethernetGE4ECCCardTableContains information on Ethernet GE206V Optical Port Expander Cards.
These are supported on the FSP150CC GE206V product. SEQUENCE OF EthernetGE4ECCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.29 |
ethernetGE4ECCCardEntryA conceptual row in the ethernetGE4ECCCardTable. EthernetGE4ECCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.29.1 |
ethernetGE4ECCCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet GE-4S Connector Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.29.1.1 |
ethernetGE4ECCCardAdminStateAdministrative State of the Ethernet GE-4S Connector Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.29.1.2 |
ethernetGE4ECCCardOperationalStateOperational State of the Ethernet GE-4S Connector Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.29.1.3 |
ethernetGE4ECCCardSecondaryStateSecondary State of the Ethernet GE-4S Connector Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.29.1.4 |
ethernetGE4ECCCardVoltageVoltage of the Ethernet GE-4S Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.29.1.5 |
ethernetGE4ECCCardTemperatureTemperature of the Ethernet GE-4S Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.29.1.6 |
ethernetGE4ECCCardRestartActionAllows to perform specified action on the
Ethernet GE-4S Connector card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.29.1.7 |
ethernetGE4ECCCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.29.1.8 |
ethernetGE4ECCCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetGE4ECCCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetGE4ECCCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetGE4ECCCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.29.1.9 |
ethernetNTEXG210CardTableContains information on Ethernet NTE XG210 Cards.
These are supported on the FSP150CC XG210 product. SEQUENCE OF EthernetNTEXG210CardEntry .1.3.6.1.4.1.2544.1.12.3.1.30 |
ethernetNTEXG210CardEntryA conceptual row in the ethernetNTEXG210CardTable. EthernetNTEXG210CardEntry .1.3.6.1.4.1.2544.1.12.3.1.30.1 |
ethernetNTEXG210CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE XG210 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.30.1.1 |
ethernetNTEXG210CardAdminStateAdministrative State of the Ethernet NTE XG210 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.30.1.2 |
ethernetNTEXG210CardOperationalStateOperational State of the Ethernet NTE XG210 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.30.1.3 |
ethernetNTEXG210CardSecondaryStateSecondary State of the Ethernet NTE XG210 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.30.1.4 |
ethernetNTEXG210CardVoltageVoltage of the Ethernet NTE XG210 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.30.1.5 |
ethernetNTEXG210CardTemperatureTemperature of the Ethernet NTE XG210 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.30.1.6 |
ethernetNTEXG210CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE XG210 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.30.1.7 |
ethernetNTEXG210CardRestartActionAllows to perform specified action on the
Ethernet NTE XG210 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.30.1.8 |
ethernetNTEXG210CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the
card level. This applies to all monitored PM entities.
The default value of this attribute is interval-15min.
Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered
fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.30.1.9 |
ethernetXG1XCCCardTableContains information on Ethernet XG210/SH1PCS XFP Port Expander Cards.
These are supported on the FSP150CC XG210, SH1PCS products. SEQUENCE OF EthernetXG1XCCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.31 |
ethernetXG1XCCCardEntryA conceptual row in the ethernetXG1XCCCardTable. EthernetXG1XCCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.31.1 |
ethernetXG1XCCCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet XG-1-XFP
Connector Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.31.1.1 |
ethernetXG1XCCCardAdminStateAdministrative State of the Ethernet XG-1-XFP Connector Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.31.1.2 |
ethernetXG1XCCCardOperationalStateOperational State of the Ethernet XG-1-XFP Connector Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.31.1.3 |
ethernetXG1XCCCardSecondaryStateSecondary State of the Ethernet XG-1-XFP Connector Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.31.1.4 |
ethernetXG1XCCCardVoltageVoltage of the Ethernet XG-1-XFP Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.31.1.5 |
ethernetXG1XCCCardTemperatureTemperature of the Ethernet XG-1-XFP Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.31.1.6 |
ethernetXG1XCCCardRestartActionAllows to perform specified action on the
Ethernet XG-1-XFP Connector card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.31.1.7 |
ethernetXG1XCCCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.31.1.8 |
ethernetXG1XCCCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetXG1XCCCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetXG1XCCCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetXG1XCCCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.31.1.9 |
ethernetXG1SCCCardTableContains information on Ethernet XG210/SH1PCS SFP+ Port Expander Cards.
These are supported on the FSP150CC XG210, SH1PCS products. SEQUENCE OF EthernetXG1SCCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.32 |
ethernetXG1SCCCardEntryA conceptual row in the ethernetXG1SCCCardTable. EthernetXG1SCCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.32.1 |
ethernetXG1SCCCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet XG-1-SFP+
Connector Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.32.1.1 |
ethernetXG1SCCCardAdminStateAdministrative State of the Ethernet XG-1-SFP+ Connector Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.32.1.2 |
ethernetXG1SCCCardOperationalStateOperational State of the Ethernet XG-1-SFP+ Connector Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.32.1.3 |
ethernetXG1SCCCardSecondaryStateSecondary State of the Ethernet XG-1-SFP+ Connector Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.32.1.4 |
ethernetXG1SCCCardVoltageVoltage of the Ethernet XG-1-SFP+ Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.32.1.5 |
ethernetXG1SCCCardTemperatureTemperature of the Ethernet XG-1-SFP+ Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.32.1.6 |
ethernetXG1SCCCardRestartActionAllows to perform specified action on the
Ethernet XG-1-SFP+ Connector card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.32.1.7 |
ethernetXG1SCCCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.32.1.8 |
ethernetXG1SCCCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetXG1SCCCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetXG1SCCCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetXG1SCCCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.32.1.9 |
ethernetOverOCSTMCardTableContains information on STM1-4-ET Cards. SEQUENCE OF EthernetOverOCSTMCardEntry .1.3.6.1.4.1.2544.1.12.3.1.33 |
ethernetOverOCSTMCardEntryA conceptual row in the ethernetOverOCSTMCardTable. EthernetOverOCSTMCardEntry .1.3.6.1.4.1.2544.1.12.3.1.33.1 |
ethernetOverOCSTMCardEntityIndexEntity Index from ENTITY-MIB for the STM1-4-ET Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.33.1.1 |
ethernetOverOCSTMCardAdminStateAdministrative State of the STM1-4-ET Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.33.1.2 |
ethernetOverOCSTMCardOperationalStateOperational State of the STM1-4-ET Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.33.1.3 |
ethernetOverOCSTMCardSecondaryStateSecondary State of the STM1-4-ET Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.33.1.4 |
ethernetOverOCSTMCardTemperatureTemperature of the STM1-4-ET Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.33.1.5 |
ethernetOverOCSTMCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the STM1-4-ET Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.33.1.6 |
ethernetOverOCSTMCardRestartActionAllows to perform specified action on the STM1-4-ET card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.33.1.7 |
ethernetOverOCSTMCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.33.1.8 |
ethernetOverOCSTMCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetOverOCSTMCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernet10x1GCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetOverOCSTMCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.33.1.9 |
ethernetOverOCSTMCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.33.1.10 |
ethernetOverOCSTMCardModeThis attribute is to show/set the SONET/SDH mode and OC3/OC12/STM1/STM4 speed for SONET/SDH..rw PortCarrierType .1.3.6.1.4.1.2544.1.12.3.1.33.1.11 |
pseudoWireOcnStmCardTableContains information on Pseudo Wire OCN STM Cards.
These are supported on the FSP150CC GE206v product. SEQUENCE OF PseudoWireOcnStmCardEntry .1.3.6.1.4.1.2544.1.12.3.1.34 |
pseudoWireOcnStmCardEntryA conceptual row in the pseudoWireOcnStmCardTable. PseudoWireOcnStmCardEntry .1.3.6.1.4.1.2544.1.12.3.1.34.1 |
pseudoWireOcnStmCardEntityIndexEntity Index from ENTITY-MIB for the Pseudo Wire OCN/STM Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.34.1.1 |
pseudoWireOcnStmCardAdminStateAdministrative State of the Pseudo Wire OCN/STM Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.34.1.2 |
pseudoWireOcnStmCardOperationalStateOperational State of the Pseudo Wire OCN/STM Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.34.1.3 |
pseudoWireOcnStmCardSecondaryStateSecondary State of the Pseudo Wire OCN/STM Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.34.1.4 |
pseudoWireOcnStmCardIpAddressIP Address associated with the Pseudo Wire OCN/STM Card.rw IpAddress .1.3.6.1.4.1.2544.1.12.3.1.34.1.5 |
pseudoWireOcnStmCardModeCard Mode of with the Pseudo Wire OCN/STM Card.rw PWE3OCNSTMCardMode .1.3.6.1.4.1.2544.1.12.3.1.34.1.6 |
pseudoWireOcnStmCardVoltageVoltage of the Pseudo Wire OCN/STM Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.34.1.7 |
pseudoWireOcnStmCardTemperatureTemperature of the Pseudo Wire OCN/STM Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.34.1.8 |
pseudoWireOcnStmCardRestartActionAllows to perform specified action on the
Pseudo Wire OCN/STM card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.34.1.9 |
pseudoWireOcnStmCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.34.1.10 |
pseudoWireOcnStmCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of pseudoWireOcnStmCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
pseudoWireOcnStmCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The pseudoWireOcnStmCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.34.1.11 |
pseudoWireOcnStmCardPSNEncapsulationThis object specifies Packet Switched Network demultiplexing layer
header type of the pseudo-wire packets.rw PSNEncapsulationMode .1.3.6.1.4.1.2544.1.12.3.1.34.1.12 |
pseudoWireOcnStmCardFreqSourceTypeThis object represents the TDM Frequency source type of OC/STM card.rw TDMFrequencySourceType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.34.1.13 |
pseudoWireOcnStmCardFreqSourceThis object represents the TDM Frequency source of OC/STM card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.34.1.14 |
pseudoWireOcnStmCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.34.1.15 |
pseudoWireE1T1CardTableContains information on Pseudo Wire T1/E1 Cards.
These are supported on the FSP150CC GE206v product. SEQUENCE OF PseudoWireE1T1CardEntry .1.3.6.1.4.1.2544.1.12.3.1.35 |
pseudoWireE1T1CardEntryA conceptual row in the pseudoWireE1T1CardTable. PseudoWireE1T1CardEntry .1.3.6.1.4.1.2544.1.12.3.1.35.1 |
pseudoWireE1T1CardEntityIndexEntity Index from ENTITY-MIB for the Pseudo Wire T1/E1 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.35.1.1 |
pseudoWireE1T1CardAdminStateAdministrative State of the Pseudo Wire T1/E1 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.35.1.2 |
pseudoWireE1T1CardOperationalStateOperational State of the Pseudo Wire T1/E1 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.35.1.3 |
pseudoWireE1T1CardSecondaryStateSecondary State of the Pseudo Wire T1/E1 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.35.1.4 |
pseudoWireE1T1CardIpAddressIP Address associated with the Pseudo Wire T1/E1 Card.rw IpAddress .1.3.6.1.4.1.2544.1.12.3.1.35.1.5 |
pseudoWireE1T1CardModeCard Mode of with the Pseudo Wire T1/E1 Card.rw PWE3E1T1CardMode .1.3.6.1.4.1.2544.1.12.3.1.35.1.6 |
pseudoWireE1T1CardVoltageVoltage of the Pseudo Wire T1/E1 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.35.1.7 |
pseudoWireE1T1CardTemperatureTemperature of the Pseudo Wire T1/E1 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.35.1.8 |
pseudoWireE1T1CardRestartActionAllows to perform specified action on the
Pseudo Wire T1/E1 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.35.1.9 |
pseudoWireE1T1CardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.35.1.10 |
pseudoWireE1T1CardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of pseudoWireE1T1CardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
pseudoWireE1T1CardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The pseudoWireE1T1CardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.35.1.11 |
pseudoWireE1T1CardPSNEncapsulationThis object specifies Packet Switched Network demultiplexing layer
header type of the pseudo-wire packets.rw PSNEncapsulationMode .1.3.6.1.4.1.2544.1.12.3.1.35.1.12 |
ethernet1x10GHighPerCardTableContains information on Ethernet 1x10G High Performance Cards. SEQUENCE OF Ethernet1x10GHighPerCardEntry .1.3.6.1.4.1.2544.1.12.3.1.36 |
ethernet1x10GHighPerCardEntryA conceptual row in the ethernet1x10GHighPerCardTable. Ethernet1x10GHighPerCardEntry .1.3.6.1.4.1.2544.1.12.3.1.36.1 |
ethernet1x10GHighPerCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet 1x10G High Performance Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.36.1.1 |
ethernet1x10GHighPerCardAdminStateAdministrative State of the Ethernet 1x10G High Performance Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.36.1.2 |
ethernet1x10GHighPerCardOperationalStateOperational State of the Ethernet 1x10G High Performance Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.36.1.3 |
ethernet1x10GHighPerCardSecondaryStateSecondary State of the Ethernet 1x10G High Performance Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.36.1.4 |
ethernet1x10GHighPerCardTemperatureTemperature of the Ethernet 1x10G High Performance Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.36.1.5 |
ethernet1x10GHighPerCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet 1x10G High Performance Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.36.1.6 |
ethernet1x10GHighPerCardRestartActionAllows to perform specified action on the Ethernet 1x10G High Performance card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.36.1.7 |
ethernet1x10GHighPerCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.36.1.8 |
ethernet1x10GHighPerCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernet1x10GHighPerCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetNTUCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernet1x10GHighPerCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.36.1.9 |
ethernet1x10GHighPerCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.36.1.10 |
ethernet10x1GHighPerCardTableContains information on Ethernet 10x1G High Performance Cards. SEQUENCE OF Ethernet10x1GHighPerCardEntry .1.3.6.1.4.1.2544.1.12.3.1.37 |
ethernet10x1GHighPerCardEntryA conceptual row in the ethernet10x1GHighPerCardTable. Ethernet10x1GHighPerCardEntry .1.3.6.1.4.1.2544.1.12.3.1.37.1 |
ethernet10x1GHighPerCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet 10x1G High Performance Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.37.1.1 |
ethernet10x1GHighPerCardAdminStateAdministrative State of the Ethernet 10x1G High Performance Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.37.1.2 |
ethernet10x1GHighPerCardOperationalStateOperational State of the Ethernet 10x1G High Performance Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.37.1.3 |
ethernet10x1GHighPerCardSecondaryStateSecondary State of the Ethernet 10x1G High Performance Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.37.1.4 |
ethernet10x1GHighPerCardTemperatureTemperature of the Ethernet 10x1G High Performance Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.37.1.5 |
ethernet10x1GHighPerCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet 10x1G High Performance Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.37.1.6 |
ethernet10x1GHighPerCardRestartActionAllows to perform specified action on the Ethernet 10x1G High Performance card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.37.1.7 |
ethernet10x1GHighPerCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.37.1.8 |
ethernet10x1GHighPerCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernet10x1GHighPerCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernet10x1GHighPerCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernet10x1GHighPerCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.37.1.9 |
ethernet10x1GHighPerCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.37.1.10 |
ethernetNTET1804CardTableContains information on Ethernet NTE T1804 Cards.
These are supported on the FSP150CC T1804 product. SEQUENCE OF EthernetNTET1804CardEntry .1.3.6.1.4.1.2544.1.12.3.1.38 |
ethernetNTET1804CardEntryA conceptual row in the ethernetNTET1804CardTable. EthernetNTET1804CardEntry .1.3.6.1.4.1.2544.1.12.3.1.38.1 |
ethernetNTET1804CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE T1804 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.38.1.1 |
ethernetNTET1804CardAdminStateAdministrative State of the Ethernet NTE T1804 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.38.1.2 |
ethernetNTET1804CardOperationalStateOperational State of the Ethernet NTE T1804 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.38.1.3 |
ethernetNTET1804CardSecondaryStateSecondary State of the Ethernet NTE T1804 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.38.1.4 |
ethernetNTET1804CardVoltageVoltage of the Ethernet NTE GE112S Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.38.1.5 |
ethernetNTET1804CardTemperatureTemperature of the Ethernet NTE T1804 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.38.1.6 |
ethernetNTET1804CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE T1804 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.38.1.7 |
ethernetNTET1804CardRestartActionAllows to perform specified action on the Ethernet NTE T1804 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.38.1.8 |
ethernetNTET1804CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.38.1.9 |
ethernetNTET1804CardModeThis attribute is to show/set E1/T1 mode of the NET T1804 card.rw PortCarrierType .1.3.6.1.4.1.2544.1.12.3.1.38.1.10 |
ethernetNTET3204CardTableContains information on Ethernet NTE T3204 Cards.
These are supported on the FSP150CC T3204 product. SEQUENCE OF EthernetNTET3204CardEntry .1.3.6.1.4.1.2544.1.12.3.1.39 |
ethernetNTET3204CardEntryA conceptual row in the ethernetNTET3204CardTable. EthernetNTET3204CardEntry .1.3.6.1.4.1.2544.1.12.3.1.39.1 |
ethernetNTET3204CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE T3204 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.39.1.1 |
ethernetNTET3204CardAdminStateAdministrative State of the Ethernet NTE T3204 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.39.1.2 |
ethernetNTET3204CardOperationalStateOperational State of the Ethernet NTE T3204 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.39.1.3 |
ethernetNTET3204CardSecondaryStateSecondary State of the Ethernet NTE T3204 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.39.1.4 |
ethernetNTET3204CardVoltageVoltage of the Ethernet NTE GE112S Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.39.1.5 |
ethernetNTET3204CardTemperatureTemperature of the Ethernet NTE T3204 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.39.1.6 |
ethernetNTET3204CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE T3204 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.39.1.7 |
ethernetNTET3204CardRestartActionAllows to perform specified action on the Ethernet NTE T3204 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.39.1.8 |
ethernetNTET3204CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.39.1.9 |
ethernetNTET3204CardModeThis attribute is to show/set E3/T3 mode of the NET T3204 card.rw PortCarrierType .1.3.6.1.4.1.2544.1.12.3.1.39.1.10 |
ethernetNTEGESyncProbeCardTableContains information on Ethernet NTE-GE SyncProbe Card.
These are supported on the FSP150CC GE SyncProbe product. SEQUENCE OF EthernetNTEGESyncProbeCardEntry .1.3.6.1.4.1.2544.1.12.3.1.40 |
ethernetNTEGESyncProbeCardEntryA conceptual row in the ethernetNTEGESyncProbeCardTable. EthernetNTEGESyncProbeCardEntry .1.3.6.1.4.1.2544.1.12.3.1.40.1 |
ethernetNTEGESyncProbeCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE SyncProbe Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.40.1.1 |
ethernetNTEGESyncProbeCardAdminStateAdministrative State of the Ethernet NTE GE SyncProbe Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.40.1.2 |
ethernetNTEGESyncProbeCardOperationalStateOperational State of the Ethernet NTE GE SyncProbe Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.40.1.3 |
ethernetNTEGESyncProbeCardSecondaryStateSecondary State of the Ethernet NTE GE SyncProbe Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.40.1.4 |
ethernetNTEGESyncProbeCardVoltageVoltage of the Ethernet NTE GE SyncProbe Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.40.1.5 |
ethernetNTEGESyncProbeCardTemperatureTemperature of the Ethernet NTE GE SyncProbe Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.40.1.6 |
ethernetNTEGESyncProbeCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE SyncProbe Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.40.1.7 |
ethernetNTEGESyncProbeCardRestartActionAllows to perform specified action on the Ethernet NTE GE SyncProbe card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.40.1.8 |
ethernetNTEGESyncProbeCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.40.1.9 |
ethernetGE8SCCCardTableContains information on Ethernet XG210/SH1PCS Optical Port Expander Cards.
These are supported on the FSP150CC XG210, SH1PCS product. SEQUENCE OF EthernetGE8SCCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.41 |
ethernetGE8SCCCardEntryA conceptual row in the ethernetGE8SCCCardTable. EthernetGE8SCCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.41.1 |
ethernetGE8SCCCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.41.1.1 |
ethernetGE8SCCCardAdminStateAdministrative State of the Ethernet GE-8S Connector Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.41.1.2 |
ethernetGE8SCCCardOperationalStateOperational State of the Ethernet GE-8S Connector Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.41.1.3 |
ethernetGE8SCCCardSecondaryStateSecondary State of the Ethernet GE-8S Connector Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.41.1.4 |
ethernetGE8SCCCardVoltageVoltage of the Ethernet GE-8S Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.41.1.5 |
ethernetGE8SCCCardTemperatureTemperature of the Ethernet GE-8S Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.41.1.6 |
ethernetGE8SCCCardRestartActionAllows to perform specified action on the
Ethernet GE-8S Connector card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.41.1.7 |
ethernetGE8SCCCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.41.1.8 |
ethernetGE8SCCCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetGE8SCCCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetGE8SCCCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetGE8SCCCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.41.1.9 |
ethernetNTEGE114HCardTableContains information on Ethernet NTE GE114H Cards.
These are supported on the FSP150CC GE114H product. SEQUENCE OF EthernetNTEGE114HCardEntry .1.3.6.1.4.1.2544.1.12.3.1.42 |
ethernetNTEGE114HCardEntryA conceptual row in the ethernetNTEGE114HCardTable. EthernetNTEGE114HCardEntry .1.3.6.1.4.1.2544.1.12.3.1.42.1 |
ethernetNTEGE114HCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE114H Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.42.1.1 |
ethernetNTEGE114HCardAdminStateAdministrative State of the Ethernet NTE GE114H Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.42.1.2 |
ethernetNTEGE114HCardOperationalStateOperational State of the Ethernet NTE GE114H Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.42.1.3 |
ethernetNTEGE114HCardSecondaryStateSecondary State of the Ethernet NTE GE114H Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.42.1.4 |
ethernetNTEGE114HCardVoltageVoltage of the Ethernet NTE GE112 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.42.1.5 |
ethernetNTEGE114HCardTemperatureTemperature of the Ethernet NTE GE114H Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.42.1.6 |
ethernetNTEGE114HCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114H Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.42.1.7 |
ethernetNTEGE114HCardRestartActionAllows to perform specified action on the Ethernet NTE GE114H card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.42.1.8 |
ethernetNTEGE114HCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.42.1.9 |
ethernetNTEGE114HCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114H card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.42.1.10 |
ethernetNTEGE114HCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114H card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.42.1.11 |
ethernetNTEGE114PHCardTableContains information on Ethernet NTE GE114PH Cards.
These are supported on the FSP150CC GE114PH product. SEQUENCE OF EthernetNTEGE114PHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.43 |
ethernetNTEGE114PHCardEntryA conceptual row in the ethernetNTEGE114PHCardTable. EthernetNTEGE114PHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.43.1 |
ethernetNTEGE114PHCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE114PH Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.43.1.1 |
ethernetNTEGE114PHCardAdminStateAdministrative State of the Ethernet NTE GE114PH Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.43.1.2 |
ethernetNTEGE114PHCardOperationalStateOperational State of the Ethernet NTE GE114PH Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.43.1.3 |
ethernetNTEGE114PHCardSecondaryStateSecondary State of the Ethernet NTE GE114PH Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.43.1.4 |
ethernetNTEGE114PHCardVoltageVoltage of the Ethernet NTE GE112 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.43.1.5 |
ethernetNTEGE114PHCardTemperatureTemperature of the Ethernet NTE GE114PH Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.43.1.6 |
ethernetNTEGE114PHCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114PH Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.43.1.7 |
ethernetNTEGE114PHCardRestartActionAllows to perform specified action on the Ethernet NTE GE114PH card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.43.1.8 |
ethernetNTEGE114PHCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.43.1.9 |
ethernetNTEGE114PHCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114PH card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.43.1.10 |
ethernetNTEGE114PHCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114PH card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.43.1.11 |
ethernetFE36ECardTableContains information on Ethernet 36x100M Cards. SEQUENCE OF EthernetFE36ECardEntry .1.3.6.1.4.1.2544.1.12.3.1.44 |
ethernetFE36ECardEntryA conceptual row in the ethernetFE36ECardTable. EthernetFE36ECardEntry .1.3.6.1.4.1.2544.1.12.3.1.44.1 |
ethernetFE36ECardEntityIndexEntity Index from ENTITY-MIB for the Ethernet FE36E Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.44.1.1 |
ethernetFE36ECardAdminStateAdministrative State of the Ethernet FE36E Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.44.1.2 |
ethernetFE36ECardOperationalStateOperational State of the Ethernet FE36E Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.44.1.3 |
ethernetFE36ECardSecondaryStateSecondary State of the Ethernet FE36E Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.44.1.4 |
ethernetFE36ECardTemperatureTemperature of the Ethernet FE36E Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.44.1.5 |
ethernetFE36ECardRestartActionAllows to perform specified action on the Ethernet FE36E card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.44.1.6 |
ethernetFE36ECardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.44.1.7 |
ethernetFE36ECardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetFE36ECardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetNTUCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetFE36ECardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.44.1.8 |
ethernetFE36ECardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.44.1.9 |
ethernetFE36ECard8023azEnabledThis object describes whether enable 802.3az energy efficient.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.44.1.10 |
ethernetNTEGE114SHCardTableContains information on Ethernet NTE GE114SH Cards.
These are supported on the FSP150CC GE114SH product. SEQUENCE OF EthernetNTEGE114SHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.45 |
ethernetNTEGE114SHCardEntryA conceptual row in the ethernetNTEGE114SHCardTable. EthernetNTEGE114SHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.45.1 |
ethernetNTEGE114SHCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE114SH Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.45.1.1 |
ethernetNTEGE114SHCardAdminStateAdministrative State of the Ethernet NTE GE114SH Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.45.1.2 |
ethernetNTEGE114SHCardOperationalStateOperational State of the Ethernet NTE GE114SH Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.45.1.3 |
ethernetNTEGE114SHCardSecondaryStateSecondary State of the Ethernet NTE GE114SH Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.45.1.4 |
ethernetNTEGE114SHCardVoltageVoltage of the Ethernet NTE GE112 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.45.1.5 |
ethernetNTEGE114SHCardTemperatureTemperature of the Ethernet NTE GE114SH Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.45.1.6 |
ethernetNTEGE114SHCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114SH Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.45.1.7 |
ethernetNTEGE114SHCardRestartActionAllows to perform specified action on the Ethernet NTE GE114SH card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.45.1.8 |
ethernetNTEGE114SHCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.45.1.9 |
ethernetNTEGE114SHCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114SH card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.45.1.10 |
ethernetNTEGE114SHCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114SH card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.45.1.11 |
ethernetNTEGE114SCardTableContains information on Ethernet NTE GE114S Cards.
These are supported on the FSP150CC GE114S product. SEQUENCE OF EthernetNTEGE114SCardEntry .1.3.6.1.4.1.2544.1.12.3.1.46 |
ethernetNTEGE114SCardEntryA conceptual row in the ethernetNTEGE114SCardTable. EthernetNTEGE114SCardEntry .1.3.6.1.4.1.2544.1.12.3.1.46.1 |
ethernetNTEGE114SCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE114S Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.46.1.1 |
ethernetNTEGE114SCardAdminStateAdministrative State of the Ethernet NTE GE114S Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.46.1.2 |
ethernetNTEGE114SCardOperationalStateOperational State of the Ethernet NTE GE114S Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.46.1.3 |
ethernetNTEGE114SCardSecondaryStateSecondary State of the Ethernet NTE GE114S Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.46.1.4 |
ethernetNTEGE114SCardVoltageVoltage of the Ethernet NTE GE112S Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.46.1.5 |
ethernetNTEGE114SCardTemperatureTemperature of the Ethernet NTE GE114S Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.46.1.6 |
ethernetNTEGE114SCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114S Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.46.1.7 |
ethernetNTEGE114SCardRestartActionAllows to perform specified action on the Ethernet NTE GE114S card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.46.1.8 |
ethernetNTEGE114SCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.46.1.9 |
ethernetNTEGE114SCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114S card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.46.1.10 |
ethernetNTEGE114SCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114S card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.46.1.11 |
stuHighPerCardTableContains information on STU Cards. SEQUENCE OF StuHighPerCardEntry .1.3.6.1.4.1.2544.1.12.3.1.47 |
stuHighPerCardEntryA conceptual row in the stuHighPerCardTable. StuHighPerCardEntry .1.3.6.1.4.1.2544.1.12.3.1.47.1 |
stuHighPerCardEntityIndexEntity Index from ENTITY-MIB for the STU High Performance Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.47.1.1 |
stuHighPerCardAdminStateAdministrative State of the Stu High Performance Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.47.1.2 |
stuHighPerCardOperationalStateOperational State of the Stu High Performance Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.47.1.3 |
stuHighPerCardSecondaryStateSecondary State of the Stu High Performance Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.47.1.4 |
stuHighPerCardTemperatureTemperature of the Stu High Performance Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.47.1.5 |
stuHighPerCardRestartActionAllows to perform specified action on the Stu High Performance card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.47.1.6 |
stuHighPerCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.47.1.7 |
stuHighPerCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of stuHighPerCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
stuRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The stuHighPerCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.47.1.8 |
stuHighPerCardForceOffLineActionOn some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force offline is disabled, reset signal is released.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.47.1.9 |
stiHighPerTableContains information on STI within the Shelf. SEQUENCE OF StiHighPerEntry .1.3.6.1.4.1.2544.1.12.3.1.48 |
stiHighPerEntryA conceptual row in the stiTable. StiHighPerEntry .1.3.6.1.4.1.2544.1.12.3.1.48.1 |
stiHighPerEntityIndexEntity Index from ENTITY-MIB for the STI High Per card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.48.1.1 |
stiHighPerAdminStateAdministrative State of the STI.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.48.1.2 |
stiHighPerOperationalStateOperational State of the STI.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.48.1.3 |
stiHighPerSecondaryStateSecondary State of the STI.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.48.1.4 |
stiHighPerTemperatureTemperature of the STI.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.48.1.5 |
stiHighPerStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.48.1.6 |
stiHighPerRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of stiRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
stiRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The stiRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.48.1.7 |
ethernetGE8ECCCardTableContains information on Ethernet XG210 Optical Port Expander Cards.
These are supported on the FSP150CC XG210, SH1PCS products. SEQUENCE OF EthernetGE8ECCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.49 |
ethernetGE8ECCCardEntryA conceptual row in the ethernetGE8ECCCardTable. EthernetGE8ECCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.49.1 |
ethernetGE8ECCCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet GE-8S Connector Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.49.1.1 |
ethernetGE8ECCCardAdminStateAdministrative State of the Ethernet GE-8S Connector Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.49.1.2 |
ethernetGE8ECCCardOperationalStateOperational State of the Ethernet GE-8S Connector Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.49.1.3 |
ethernetGE8ECCCardSecondaryStateSecondary State of the Ethernet GE-8S Connector Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.49.1.4 |
ethernetGE8ECCCardVoltageVoltage of the Ethernet GE-8S Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.49.1.5 |
ethernetGE8ECCCardTemperatureTemperature of the Ethernet GE-8S Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.49.1.6 |
ethernetGE8ECCCardRestartActionAllows to perform specified action on the
Ethernet GE-8S Connector card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.49.1.7 |
ethernetGE8ECCCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.49.1.8 |
ethernetGE8ECCCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetGE8ECCCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetGE8ECCCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetGE8ECCCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.49.1.9 |
networkElementLLDPParamsTableEntries may be auto discovered, or can be explicitly created by
SNMP Manager. Each remotely discovered shelf is represented as
a row in this table. SEQUENCE OF NetworkElementLLDPParamsEntry .1.3.6.1.4.1.2544.1.12.3.1.50 |
networkElementLLDPParamsEntryA conceptual row in the networkElementLLDPParamsTable. NetworkElementLLDPParamsEntry .1.3.6.1.4.1.2544.1.12.3.1.50.1 |
neLLDPParamsLLDPEnableActionThis object allows user enable or disable LLDP on all the ports in the NE.rw LLDPEnableAction .1.3.6.1.4.1.2544.1.12.3.1.50.1.1 |
ethernetNTESH1PCSCardTableContains information on Ethernet NTE SH1PCS Cards.
These are supported on the FSP150CC SH1PCS product. SEQUENCE OF EthernetNTESH1PCSCardEntry .1.3.6.1.4.1.2544.1.12.3.1.51 |
ethernetNTESH1PCSCardEntryA conceptual row in the ethernetNTESH1PCSCardTable. EthernetNTESH1PCSCardEntry .1.3.6.1.4.1.2544.1.12.3.1.51.1 |
ethernetNTESH1PCSCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE SH1PCS Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.51.1.1 |
ethernetNTESH1PCSCardAdminStateAdministrative State of the Ethernet NTE SH1PCS Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.51.1.2 |
ethernetNTESH1PCSCardOperationalStateOperational State of the Ethernet NTE SH1PCS Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.51.1.3 |
ethernetNTESH1PCSCardSecondaryStateSecondary State of the Ethernet NTE SH1PCS Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.51.1.4 |
ethernetNTESH1PCSCardVoltageVoltage of the Ethernet NTE SH1PCS Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.51.1.5 |
ethernetNTESH1PCSCardTemperatureTemperature of the Ethernet NTE SH1PCS Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.51.1.6 |
ethernetNTESH1PCSCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE SH1PCS Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.51.1.7 |
ethernetNTESH1PCSCardRestartActionAllows to perform specified action on the
Ethernet NTE SH1PCS card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.51.1.8 |
ethernetNTESH1PCSCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the
card level. This applies to all monitored PM entities.
The default value of this attribute is interval-15min.
Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered
fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.51.1.9 |
ethernetNTEOSA5411CardTableContains information on Ethernet NTE OSA5411 Card.
These are supported on the FSP150CC OSA5411 product. SEQUENCE OF EthernetNTEOSA5411CardEntry .1.3.6.1.4.1.2544.1.12.3.1.52 |
ethernetNTEOSA5411CardEntryA conceptual row in the ethernetNTEOSA5411CardTable. EthernetNTEOSA5411CardEntry .1.3.6.1.4.1.2544.1.12.3.1.52.1 |
ethernetNTEOSA5411CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE OSA5411 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.52.1.1 |
ethernetNTEOSA5411CardAdminStateAdministrative State of the Ethernet NTE OSA5411 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.52.1.2 |
ethernetNTEOSA5411CardOperationalStateOperational State of the Ethernet NTE OSA5411 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.52.1.3 |
ethernetNTEOSA5411CardSecondaryStateSecondary State of the Ethernet NTE OSA5411 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.52.1.4 |
ethernetNTEOSA5411CardVoltageVoltage of the Ethernet NTE OSA5411 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.52.1.5 |
ethernetNTEOSA5411CardTemperatureTemperature of the Ethernet NTE OSA5411 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.52.1.6 |
ethernetNTEOSA5411CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE OSA5411 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.52.1.7 |
ethernetNTEOSA5411CardRestartActionAllows to perform specified action on the Ethernet NTE OSA5411 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.52.1.8 |
ethernetNTEOSA5411CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.52.1.9 |
ethernetNTEGE112ProCardTableContains information on Ethernet NTE GE112 Pro Cards.
These are supported on the FSP150CC GE112 Pro product. SEQUENCE OF EthernetNTEGE112ProCardEntry .1.3.6.1.4.1.2544.1.12.3.1.53 |
ethernetNTEGE112ProCardEntryA conceptual row in the ethernetNTEGE112ProCardTable. EthernetNTEGE112ProCardEntry .1.3.6.1.4.1.2544.1.12.3.1.53.1 |
ethernetNTEGE112ProCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.53.1.1 |
ethernetNTEGE112ProCardAdminStateAdministrative State of the Ethernet NTE GE112 Pro Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.53.1.2 |
ethernetNTEGE112ProCardOperationalStateOperational State of the Ethernet NTE GE112Pro Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.53.1.3 |
ethernetNTEGE112ProCardSecondaryStateSecondary State of the Ethernet NTE GE112Pro Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.53.1.4 |
ethernetNTEGE112ProCardVoltageVoltage of the Ethernet NTE GE112Pro Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.53.1.5 |
ethernetNTEGE112ProCardTemperatureTemperature of the Ethernet NTE GE112Pro Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.53.1.6 |
ethernetNTEGE112ProCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE112Pro Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.53.1.7 |
ethernetNTEGE112ProCardRestartActionAllows to perform specified action on the Ethernet NTE GE112Pro card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.53.1.8 |
ethernetNTEGE112ProCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.53.1.9 |
ethernetNTEGE112ProCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE112Pro card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.53.1.10 |
ethernetNTEGE112ProCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE112Pro card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.53.1.11 |
ethernetNTEGE112ProMCardTableContains information on Ethernet NTE GE112 Pro Cards.
These are supported on the FSP150CC GE112 Pro product. SEQUENCE OF EthernetNTEGE112ProMCardEntry .1.3.6.1.4.1.2544.1.12.3.1.54 |
ethernetNTEGE112ProMCardEntryA conceptual row in the ethernetNTEGE112ProMCardTable. EthernetNTEGE112ProMCardEntry .1.3.6.1.4.1.2544.1.12.3.1.54.1 |
ethernetNTEGE112ProMCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.54.1.1 |
ethernetNTEGE112ProMCardAdminStateAdministrative State of the Ethernet NTE GE112 Pro Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.54.1.2 |
ethernetNTEGE112ProMCardOperationalStateOperational State of the Ethernet NTE GE112ProM Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.54.1.3 |
ethernetNTEGE112ProMCardSecondaryStateSecondary State of the Ethernet NTE GE112ProM Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.54.1.4 |
ethernetNTEGE112ProMCardVoltageVoltage of the Ethernet NTE GE112ProM Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.54.1.5 |
ethernetNTEGE112ProMCardTemperatureTemperature of the Ethernet NTE GE112ProM Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.54.1.6 |
ethernetNTEGE112ProMCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE112ProM Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.54.1.7 |
ethernetNTEGE112ProMCardRestartActionAllows to perform specified action on the Ethernet NTE GE112ProM card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.54.1.8 |
ethernetNTEGE112ProMCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.54.1.9 |
ethernetNTEGE112ProMCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE112ProM card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.54.1.10 |
ethernetNTEGE112ProMCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE112ProM card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.54.1.11 |
ethernetNTEXG210CCardTableContains information on Ethernet NTE XG210 Cards.
These are supported on the FSP150CC XG210 product. SEQUENCE OF EthernetNTEXG210CCardEntry .1.3.6.1.4.1.2544.1.12.3.1.55 |
ethernetNTEXG210CCardEntryA conceptual row in the ethernetNTEXG210CCardTable. EthernetNTEXG210CCardEntry .1.3.6.1.4.1.2544.1.12.3.1.55.1 |
ethernetNTEXG210CCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE XG210C Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.55.1.1 |
ethernetNTEXG210CCardAdminStateAdministrative State of the Ethernet NTE XG210C Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.55.1.2 |
ethernetNTEXG210CCardOperationalStateOperational State of the Ethernet NTE XG210C Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.55.1.3 |
ethernetNTEXG210CCardSecondaryStateSecondary State of the Ethernet NTE XG210C Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.55.1.4 |
ethernetNTEXG210CCardVoltageVoltage of the Ethernet NTE XG210C Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.55.1.5 |
ethernetNTEXG210CCardTemperatureTemperature of the Ethernet NTE XG210C Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.55.1.6 |
ethernetNTEXG210CCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE XG210C Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.55.1.7 |
ethernetNTEXG210CCardRestartActionAllows to perform specified action on the
Ethernet NTE XG210 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.55.1.8 |
ethernetNTEXG210CCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the
card level. This applies to all monitored PM entities.
The default value of this attribute is interval-15min.
Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered
fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.55.1.9 |
ethernetGE8SCryptoConnectorCardTableContains information on Ethernet XG210C Optical Port Expander Cards.
These are supported on the XG210C MACSEC board. SEQUENCE OF EthernetGE8SCryptoConnectorCardEntry .1.3.6.1.4.1.2544.1.12.3.1.56 |
ethernetGE8SCryptoConnectorCardEntryA conceptual row in the ethernetGE8SCryptoConnectorCardTable. EthernetGE8SCryptoConnectorCardEntry .1.3.6.1.4.1.2544.1.12.3.1.56.1 |
ethernetGE8SCryptoConnectorCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet GE-8SC Connector Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.56.1.1 |
ethernetGE8SCryptoConnectorCardAdminStateAdministrative State of the Ethernet GE-8SC Connector Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.56.1.2 |
ethernetGE8SCryptoConnectorCardOperationalStateOperational State of the Ethernet GE-8SC Connector Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.56.1.3 |
ethernetGE8SCryptoConnectorCardSecondaryStateSecondary State of the Ethernet GE-8SC Connector Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.56.1.4 |
ethernetGE8SCryptoConnectorCardVoltageVoltage of the Ethernet GE-8SC Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.56.1.5 |
ethernetGE8SCryptoConnectorCardTemperatureTemperature of the Ethernet GE-8SC Connector Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.56.1.6 |
ethernetGE8SCryptoConnectorCardRestartActionAllows to perform specified action on the
Ethernet GE-8SC Connector card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.56.1.7 |
ethernetGE8SCryptoConnectorCardStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.56.1.8 |
ethernetGE8SCryptoConnectorCardRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of ethernetGE8SCryptoConnectorCardRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
ethernetGE8SCryptoConnectorCardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The ethernetGE8SCryptoConnectorCardRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.56.1.9 |
ethernetNTEGE114ProCardTableContains information on Ethernet NTE GE112 Pro Cards.
These are supported on the FSP150CC GE112 Pro product. SEQUENCE OF EthernetNTEGE114ProCardEntry .1.3.6.1.4.1.2544.1.12.3.1.57 |
ethernetNTEGE114ProCardEntryA conceptual row in the ethernetNTEGE114ProCardTable. EthernetNTEGE114ProCardEntry .1.3.6.1.4.1.2544.1.12.3.1.57.1 |
ethernetNTEGE114ProCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.57.1.1 |
ethernetNTEGE114ProCardAdminStateAdministrative State of the Ethernet NTE GE112 Pro Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.57.1.2 |
ethernetNTEGE114ProCardOperationalStateOperational State of the Ethernet NTE GE114Pro Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.57.1.3 |
ethernetNTEGE114ProCardSecondaryStateSecondary State of the Ethernet NTE GE114Pro Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.57.1.4 |
ethernetNTEGE114ProCardVoltageVoltage of the Ethernet NTE GE114Pro Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.57.1.5 |
ethernetNTEGE114ProCardTemperatureTemperature of the Ethernet NTE GE114Pro Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.57.1.6 |
ethernetNTEGE114ProCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114Pro Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.57.1.7 |
ethernetNTEGE114ProCardRestartActionAllows to perform specified action on the Ethernet NTE GE114Pro card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.57.1.8 |
ethernetNTEGE114ProCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.57.1.9 |
ethernetNTEGE114ProCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114Pro card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.57.1.10 |
ethernetNTEGE114ProCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114Pro card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.57.1.11 |
ethernetNTEGE114ProCCardTableContains information on Ethernet NTE GE112 Pro Cards.
These are supported on the FSP150CC GE112 Pro product. SEQUENCE OF EthernetNTEGE114ProCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.58 |
ethernetNTEGE114ProCCardEntryA conceptual row in the ethernetNTEGE114ProCCardTable. EthernetNTEGE114ProCCardEntry .1.3.6.1.4.1.2544.1.12.3.1.58.1 |
ethernetNTEGE114ProCCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.58.1.1 |
ethernetNTEGE114ProCCardAdminStateAdministrative State of the Ethernet NTE GE112 Pro Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.58.1.2 |
ethernetNTEGE114ProCCardOperationalStateOperational State of the Ethernet NTE GE114ProC Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.58.1.3 |
ethernetNTEGE114ProCCardSecondaryStateSecondary State of the Ethernet NTE GE114ProC Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.58.1.4 |
ethernetNTEGE114ProCCardVoltageVoltage of the Ethernet NTE GE114ProC Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.58.1.5 |
ethernetNTEGE114ProCCardTemperatureTemperature of the Ethernet NTE GE114ProC Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.58.1.6 |
ethernetNTEGE114ProCCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114ProC Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.58.1.7 |
ethernetNTEGE114ProCCardRestartActionAllows to perform specified action on the Ethernet NTE GE114ProC card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.58.1.8 |
ethernetNTEGE114ProCCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.58.1.9 |
ethernetNTEGE114ProCCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114ProC card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.58.1.10 |
ethernetNTEGE114ProCCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114ProC card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.58.1.11 |
ethernetNTEGE114ProSHCardTableContains information on Ethernet NTE GE112 Pro Cards.
These are supported on the FSP150CC GE112 Pro product. SEQUENCE OF EthernetNTEGE114ProSHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.59 |
ethernetNTEGE114ProSHCardEntryA conceptual row in the ethernetNTEGE114ProSHCardTable. EthernetNTEGE114ProSHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.59.1 |
ethernetNTEGE114ProSHCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.59.1.1 |
ethernetNTEGE114ProSHCardAdminStateAdministrative State of the Ethernet NTE GE112 Pro Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.59.1.2 |
ethernetNTEGE114ProSHCardOperationalStateOperational State of the Ethernet NTE GE114ProS Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.59.1.3 |
ethernetNTEGE114ProSHCardSecondaryStateSecondary State of the Ethernet NTE GE114ProS Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.59.1.4 |
ethernetNTEGE114ProSHCardVoltageVoltage of the Ethernet NTE GE114ProS Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.59.1.5 |
ethernetNTEGE114ProSHCardTemperatureTemperature of the Ethernet NTE GE114ProS Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.59.1.6 |
ethernetNTEGE114ProSHCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114ProS Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.59.1.7 |
ethernetNTEGE114ProSHCardRestartActionAllows to perform specified action on the Ethernet NTE GE114ProS card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.59.1.8 |
ethernetNTEGE114ProSHCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.59.1.9 |
ethernetNTEGE114ProSHCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114ProSH card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.59.1.10 |
ethernetNTEGE114ProSHCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114ProSH card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.59.1.11 |
ethernetNTEGE114ProCSHCardTableContains information on Ethernet NTE GE112 Pro Cards.
These are supported on the FSP150CC GE112 Pro product. SEQUENCE OF EthernetNTEGE114ProCSHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.60 |
ethernetNTEGE114ProCSHCardEntryA conceptual row in the ethernetNTEGE114ProCSHCardTable. EthernetNTEGE114ProCSHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.60.1 |
ethernetNTEGE114ProCSHCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.60.1.1 |
ethernetNTEGE114ProCSHCardAdminStateAdministrative State of the Ethernet NTE GE112 Pro Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.60.1.2 |
ethernetNTEGE114ProCSHCardOperationalStateOperational State of the Ethernet NTE GE114ProCS Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.60.1.3 |
ethernetNTEGE114ProCSHCardSecondaryStateSecondary State of the Ethernet NTE GE114ProCS Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.60.1.4 |
ethernetNTEGE114ProCSHCardVoltageVoltage of the Ethernet NTE GE114ProCS Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.60.1.5 |
ethernetNTEGE114ProCSHCardTemperatureTemperature of the Ethernet NTE GE114ProCS Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.60.1.6 |
ethernetNTEGE114ProCSHCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114ProCS Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.60.1.7 |
ethernetNTEGE114ProCSHCardRestartActionAllows to perform specified action on the Ethernet NTE GE114ProCS card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.60.1.8 |
ethernetNTEGE114ProCSHCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.60.1.9 |
ethernetNTEGE114ProCSHCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114ProCS card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.60.1.10 |
ethernetNTEGE114ProCSHCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114ProCS card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.60.1.11 |
ethernetNTEGE114ProHECardTableContains information on Ethernet NTE GE112 Pro Cards.
These are supported on the FSP150CC GE112 Pro product. SEQUENCE OF EthernetNTEGE114ProHECardEntry .1.3.6.1.4.1.2544.1.12.3.1.61 |
ethernetNTEGE114ProHECardEntryA conceptual row in the ethernetNTEGE114ProHECardTable. EthernetNTEGE114ProHECardEntry .1.3.6.1.4.1.2544.1.12.3.1.61.1 |
ethernetNTEGE114ProHECardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.61.1.1 |
ethernetNTEGE114ProHECardAdminStateAdministrative State of the Ethernet NTE GE112 Pro Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.61.1.2 |
ethernetNTEGE114ProHECardOperationalStateOperational State of the Ethernet NTE GE114ProHE Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.61.1.3 |
ethernetNTEGE114ProHECardSecondaryStateSecondary State of the Ethernet NTE GE114ProHE Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.61.1.4 |
ethernetNTEGE114ProHECardVoltageVoltage of the Ethernet NTE GE114ProHE Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.61.1.5 |
ethernetNTEGE114ProHECardTemperatureTemperature of the Ethernet NTE GE114ProHE Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.61.1.6 |
ethernetNTEGE114ProHECardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114ProHE Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.61.1.7 |
ethernetNTEGE114ProHECardRestartActionAllows to perform specified action on the Ethernet NTE GE114ProHE card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.61.1.8 |
ethernetNTEGE114ProHECardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.61.1.9 |
ethernetNTEGE114ProHECardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114ProHE card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.61.1.10 |
ethernetNTEGE114ProHECardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114ProHE card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.61.1.11 |
ethernetNTEGE112ProHCardTableContains information on Ethernet NTE GE112 Pro Cards.
These are supported on the FSP150CC GE112 Pro product. SEQUENCE OF EthernetNTEGE112ProHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.62 |
ethernetNTEGE112ProHCardEntryA conceptual row in the ethernetNTEGE112ProHCardTable. EthernetNTEGE112ProHCardEntry .1.3.6.1.4.1.2544.1.12.3.1.62.1 |
ethernetNTEGE112ProHCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE112 Pro Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.62.1.1 |
ethernetNTEGE112ProHCardAdminStateAdministrative State of the Ethernet NTE GE112 Pro Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.62.1.2 |
ethernetNTEGE112ProHCardOperationalStateOperational State of the Ethernet NTE GE112ProH Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.62.1.3 |
ethernetNTEGE112ProHCardSecondaryStateSecondary State of the Ethernet NTE GE112ProH Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.62.1.4 |
ethernetNTEGE112ProHCardVoltageVoltage of the Ethernet NTE GE112ProH Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.62.1.5 |
ethernetNTEGE112ProHCardTemperatureTemperature of the Ethernet NTE GE112ProH Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.62.1.6 |
ethernetNTEGE112ProHCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE112ProH Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.62.1.7 |
ethernetNTEGE112ProHCardRestartActionAllows to perform specified action on the Ethernet NTE GE112ProH card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.62.1.8 |
ethernetNTEGE112ProHCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.62.1.9 |
ethernetNTEGE112ProHCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE112ProH card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.62.1.10 |
ethernetNTEGE112ProHCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE112ProH card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.62.1.11 |
ethernetNTEOSA5420CardTableContains information on Ethernet NTE OSA5420 Card.
These are supported on the FSP150CC OSA5420 product. SEQUENCE OF EthernetNTEOSA5420CardEntry .1.3.6.1.4.1.2544.1.12.3.1.63 |
ethernetNTEOSA5420CardEntryA conceptual row in the ethernetNTEOSA5420CardTable. EthernetNTEOSA5420CardEntry .1.3.6.1.4.1.2544.1.12.3.1.63.1 |
ethernetNTEOSA5420CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE OSA5420 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.63.1.1 |
ethernetNTEOSA5420CardAdminStateAdministrative State of the Ethernet NTE OSA5420 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.63.1.2 |
ethernetNTEOSA5420CardOperationalStateOperational State of the Ethernet NTE OSA5420 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.63.1.3 |
ethernetNTEOSA5420CardSecondaryStateSecondary State of the Ethernet NTE OSA5420 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.63.1.4 |
ethernetNTEOSA5420CardVoltageVoltage of the Ethernet NTE OSA5420 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.63.1.5 |
ethernetNTEOSA5420CardTemperatureTemperature of the Ethernet NTE OSA5420 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.63.1.6 |
ethernetNTEOSA5420CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE OSA5420 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.63.1.7 |
ethernetNTEOSA5420CardRestartActionAllows to perform specified action on the Ethernet NTE OSA5420 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.63.1.8 |
ethernetNTEOSA5420CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.63.1.9 |
ethernetNTEOSA5421CardTableContains information on Ethernet NTE OSA5421 Card.
These are supported on the FSP150CC OSA5421 product. SEQUENCE OF EthernetNTEOSA5421CardEntry .1.3.6.1.4.1.2544.1.12.3.1.64 |
ethernetNTEOSA5421CardEntryA conceptual row in the ethernetNTEOSA5421CardTable. EthernetNTEOSA5421CardEntry .1.3.6.1.4.1.2544.1.12.3.1.64.1 |
ethernetNTEOSA5421CardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE OSA5421 Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.64.1.1 |
ethernetNTEOSA5421CardAdminStateAdministrative State of the Ethernet NTE OSA5421 Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.64.1.2 |
ethernetNTEOSA5421CardOperationalStateOperational State of the Ethernet NTE OSA5421 Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.64.1.3 |
ethernetNTEOSA5421CardSecondaryStateSecondary State of the Ethernet NTE OSA5421 Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.64.1.4 |
ethernetNTEOSA5421CardVoltageVoltage of the Ethernet NTE OSA5421 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.64.1.5 |
ethernetNTEOSA5421CardTemperatureTemperature of the Ethernet NTE OSA5421 Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.64.1.6 |
ethernetNTEOSA5421CardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE OSA5421 Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.64.1.7 |
ethernetNTEOSA5421CardRestartActionAllows to perform specified action on the Ethernet NTE OSA5421 card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.64.1.8 |
ethernetNTEOSA5421CardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.64.1.9 |
ethernetNTEGE114GCardTableContains information on Ethernet NTE GE114G Cards.
These are supported on the FSP150CC GE114G product. SEQUENCE OF EthernetNTEGE114GCardEntry .1.3.6.1.4.1.2544.1.12.3.1.65 |
ethernetNTEGE114GCardEntryA conceptual row in the ethernetNTEGE114GCardTable. EthernetNTEGE114GCardEntry .1.3.6.1.4.1.2544.1.12.3.1.65.1 |
ethernetNTEGE114GCardEntityIndexEntity Index from ENTITY-MIB for the Ethernet NTE GE114G Card.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.12.3.1.65.1.1 |
ethernetNTEGE114GCardAdminStateAdministrative State of the Ethernet NTE GE114G Card.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.65.1.2 |
ethernetNTEGE114GCardOperationalStateOperational State of the Ethernet NTE GE114G Card.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.65.1.3 |
ethernetNTEGE114GCardSecondaryStateSecondary State of the Ethernet NTE GE114G Card.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.65.1.4 |
ethernetNTEGE114GCardVoltageVoltage of the Ethernet NTE GE114G Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.65.1.5 |
ethernetNTEGE114GCardTemperatureTemperature of the Ethernet NTE GE114G Card.ro Integer32 .1.3.6.1.4.1.2544.1.12.3.1.65.1.6 |
ethernetNTEGE114GCardSnmpDyingGaspEnabledWhether or not SNMP dying gasp is enabled
on the Ethernet NTE GE114G Card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.65.1.7 |
ethernetNTEGE114GCardRestartActionAllows to perform specified action on the Ethernet NTE GE114G card.rw RestartType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.65.1.8 |
ethernetNTEGE114GCardFineGrainedPmIntervalAllows specification of the fine-grained PM interval at the card level.
This applies to all monitored PM entities. The default value of this
attribute is interval-15min. Valid values are interval-5min and interval-15min.
interval-1day and rollover are not considered fine-grained intervals.rw CmPmIntervalType (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.3.1.65.1.9 |
ethernetNTEGE114GCardSwitchPortActionPortWhich port to perform specified switch action on the Ethernet NTE GE114G card.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.3.1.65.1.10 |
ethernetNTEGE114GCardSwitchPortActionAllows to perform specified action on the Ethernet NTE GE114G card.rw SwitchPortAction .1.3.6.1.4.1.2544.1.12.3.1.65.1.11 |
cmEntityConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.3.2 |
cmEntityCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.3.2.1 |
cmEntityGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.3.2.2 |