Home/Catalog/ADVA-MIB

ADVA-MIB

AI MIB Summary

The ADVA-MIB module provides SNMP-based management and monitoring capabilities for ADVA Optical Networking hardware, exposing performance counters and status indicators for optical transport interfaces, line cards, and system health metrics. It enables network operators to track critical optical parameters such as signal power, error rates, and equipment availability across ADVA's optical transport platform.

The ADVA Optical Networking base MIB.
Main OID:
advaMIB.1.3.6.1.4.1.2544
371
Objects
Active
Status
6
Dependencies

Imported Objects

SNMPv2-SMI
IF-MIB
ENTITY-MIB
SNMPv2-TC
SNMP-FRAMEWORK-MIB
SNMPv2-CONF

Objects

371 total
Object Name
advaMIBThe ADVA Optical Networking base MIB.
MODULE-IDENTITY
.1.3.6.1.4.1.2544
products
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1
fsp3000
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.4
fsp1000
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.6
fsp2000
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.7
fsp1000adm
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.8
fsp1500
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.9
fsp150
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.10
fspR7
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.11
fsp150cm
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.12
fspNm
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.1.13
common
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2
neInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.1
neMibVariantThe variant of the SNMP enterprise MIB. This object will together with sysObjectID [RFC1213] uniquely identify the revision and variant of the enterprise MIB used by the NE.ro
Integer32
.1.3.6.1.4.1.2544.2.1.1
neManufacturerManufacturer of the system. This value is used to present in clear text the manufacturer of the system.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.1.2
neDateAndTimeReports the current local time on the Network Element. It also allows to set the local time. However, SET requests may not be supported by all products.rw
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.1.3
neMemorySizeTotalThe total amount of physical main memory contained in the NEMI.ro
KBytes UNITS "kBytes"
.1.3.6.1.4.1.2544.2.1.4
neMemorySizeFreeThe amount of unused physical main memory contained in the NEMI.ro
KBytes UNITS "kBytes"
.1.3.6.1.4.1.2544.2.1.5
neStorageTableThe table of long-term storage partitions contained in the NE.
SEQUENCE OF NeStorageEntry
.1.3.6.1.4.1.2544.2.1.6
neStorageEntryAn entry for one long-term storage partition contained in the NE.
NeStorageEntry
.1.3.6.1.4.1.2544.2.1.6.1
neStorageIndexThe index of the NE storage partition.
Unsigned32
.1.3.6.1.4.1.2544.2.1.6.1.1
neStorageDescrThe product specific description of the NE storage partition.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.1.6.1.2
neStorageCapacityThe total capacity of the NE storage partition.ro
KBytes UNITS "kBytes"
.1.3.6.1.4.1.2544.2.1.6.1.3
neStorageAvailableThe free space on the NE storage partition.ro
KBytes UNITS "kBytes"
.1.3.6.1.4.1.2544.2.1.6.1.4
neAlarmStatusThe highest severity of all currently active alarms on the NE. Alarms that are not reported because of Alarm Report Control (ARC) or any other administrative state are not considered active. The values indeterminate(1) and notReported(7) are not applicable for this object. The value cleared(6) indicates that the NE reports no alarm (i.e. Alarm LED(s) off).ro
TrapAlarmSeverity
.1.3.6.1.4.1.2544.2.1.7
admin
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.2
snmpWriteAccessRestrictionThis value is used in combination with the snmpWriteAccessTable for additional security for SNMP set requests. When the status is Disabled, SNMP set requests from any NMS (using the correct write community) are accepted (ie, the snmpWriteAccessTable entries do not apply). When the status is Enabled, however, only SNMP set requests from NMSs (using the correct write community) which are listed in the snmpWriteAccessTable are accepted. This object is read-only, meaning that it cannot be updated via the SNMP interface. The operator must configure SNMP write access permissions via a non-SNMP interface.ro
EnableState
.1.3.6.1.4.1.2544.2.2.1
snmpWriteAccessTableTable of authorized NMSs (identified by IP address) for SNMP set requests. This table is not relevant if snmpWriteAccessRestriction is set to Disabled. The entries of this table are read-only. This means that the SNMP write access permissions cannot be updated via the SNMP interface. The operator must configure them via a non-SNMP interface.
SEQUENCE OF SnmpWriteAccessEntry
.1.3.6.1.4.1.2544.2.2.2
snmpWriteAccessEntryEntries in the SNMP Write Access Table. The maximum of rows in this table is product specific, typically 10.
SnmpWriteAccessEntry
.1.3.6.1.4.1.2544.2.2.2.1
snmpWriteAccessNmsAddressIP Address of the NMS which has SNMP write permission.
IpAddress
.1.3.6.1.4.1.2544.2.2.2.1.1
snmpWriteAccessNmsNameName of the NMS.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.2.2.1.2
events
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.3
neEventsLoggedThis value is the sum of all notified events (trap counter). It is also the event number of the most recent event (neEventLogIndex) found in the neEventLog tables. It can, for example, be used to check if a notification (trap) is lost. The value is reset to 0 after a cold start. The counter is increased even if no trap sinks are specified.ro
TrapCounter
.1.3.6.1.4.1.2544.2.3.1
neEventLogTableTable of events issued by the NE's SNMP agent. The eventLog entries are read-only.
SEQUENCE OF NeEventLogEntry
.1.3.6.1.4.1.2544.2.3.2
neEventLogEntryEntries in the neEventLog Table. Enterprise traps are always logged; logging of Generic traps is product specific.
NeEventLogEntry
.1.3.6.1.4.1.2544.2.3.2.1
neEventLogIndexThe associated neEventsLogged counter for the logged event (trap).
TrapCounter
.1.3.6.1.4.1.2544.2.3.2.1.1
neEventLogTimeStampThe NE Date and Time when the event (trap) occurred. This object is used in the trap varbind.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.3.2.1.2
neEventLogNotificationOIDThe NOTIFICATION-TYPE object identifier of the event that occurred. The last part of the OID corresponds to the specific trap type value in the trap PDU.ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.3.2.1.3
neEventLogIdentityTranslationTranslation of entPhysicalIndex/ifIndex or other identifier to a string used in the trap varbind following the timestamp varbind.ro
IdentityTranslation
.1.3.6.1.4.1.2544.2.3.2.1.4
neEventLogVarTableTable of variables corresponding to events logged in the neEventLog.
SEQUENCE OF NeEventLogVarEntry
.1.3.6.1.4.1.2544.2.3.3
neEventLogVarEntryEntries in the neEventLogVar Table. An entry appears in this table for each variable in the varbind list of an entry in the neEventLogTable. For an event having no variables, no entries are found in this table.
NeEventLogVarEntry
.1.3.6.1.4.1.2544.2.3.3.1
neEventLogVarIndexA monotonically increasing integer, starting at 1 for a given neEventLogIndex, for indexing a variable contained in the varbind list of a logged event.
Unsigned32
.1.3.6.1.4.1.2544.2.3.3.1.1
neEventLogVarIdThe object identifier of the variable in the varbind list.ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.3.3.1.2
neEventLogVarTypeThe type of variable. One and only one of the value objects that follow must be instantiated, based on this type. The used types depend on the enterprise traps defined for the specific product.ro
Enumeration
.1.3.6.1.4.1.2544.2.3.3.1.3
neEventLogVarInteger32ValThe value when neEventLogVarType is 'integer32'. Integer32 is also used to represent INTEGER types. Otherwise, 0 is returned.ro
Integer32
.1.3.6.1.4.1.2544.2.3.3.1.4
neEventLogVarIpAddressValThe value when neEventLogVarType is 'ipAddress'. Otherwise, an empty address is returned.ro
IpAddress
.1.3.6.1.4.1.2544.2.3.3.1.5
neEventLogVarOctetStringValThe value when neEventLogVarType is 'octetString'. OctetString is used for all string types, including DisplayString, SnmpAdminString and DateAndTime. Otherwise, an empty string is returned.ro
OCTET STRING
.1.3.6.1.4.1.2544.2.3.3.1.6
neEventLogVarOidValThe value when neEventLogVarType is 'objectId'. Otherwise, an objectId { 0.0 } is returned.ro
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.3.3.1.7
neEventLogVarCounter64ValThe value when neEventLogVarType is 'counter64'.ro
Counter64
.1.3.6.1.4.1.2544.2.3.3.1.8
neEventLogVarUnsigned32ValThe value when neEventLogVarType is 'unsigned32'.ro
Unsigned32
.1.3.6.1.4.1.2544.2.3.3.1.10
neTrapsinkTableTable of Trapsinks. A neTrapsinkTable entry can be created, deleted or modified via the SNMP interface for a specific address and port.
SEQUENCE OF NeTrapsinkEntry
.1.3.6.1.4.1.2544.2.3.4
neTrapsinkEntryEntries in the Trapsink Table. Entries are created and deleted using the neTrapsinkRowStatus object. The maximum of rows in this table is product specific.
NeTrapsinkEntry
.1.3.6.1.4.1.2544.2.3.4.1
neTrapsinkAddressIP Address of the Management System which should receive SNMP Traps.
IpAddress
.1.3.6.1.4.1.2544.2.3.4.1.1
neTrapsinkPortThe port number where the specified trap sink will receive SNMP traps.
Integer32
.1.3.6.1.4.1.2544.2.3.4.1.2
neTrapsinkCommunityCommunity String which is sent with an SNMP Trap to the Management Station. If no community is specified, the default (public) is used.rw
DisplayString
.1.3.6.1.4.1.2544.2.3.4.1.3
neTrapsinkRowStatusThe status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6).rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.3.4.1.4
neTrapsinkVersionrw
Unsigned32 UNITS ""
.1.3.6.1.4.1.2544.2.3.4.1.5
neTrapsinkUserNameA human readable string representing the name of the user.rw
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.3.4.1.6
software
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.4
swVersionTableSoftware version information table for units/modules which run a management Operating System. This includes the Application software and Operating System software.
SEQUENCE OF SwVersionEntry
.1.3.6.1.4.1.2544.2.4.1
swVersionEntryEntries in the swVersion Table.
SwVersionEntry
.1.3.6.1.4.1.2544.2.4.1.1
swVersionActiveApplSwReports the active Application software version on the unit/module.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.1.1.1
swVersionInactiveApplSwReports the inactive Application software version available on the unit/module.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.1.1.2
swVersionActiveOperatingSwReports the active Operating System software version on the unit/module.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.1.1.3
swVersionInactiveOperatingSwReports the inactive Operating System software version available on the unit/module.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.1.1.4
swVersionNextBootReports which software will be run at next boot, either the currently active one again or the alternative (currently inactive) one.ro
Enumeration
.1.3.6.1.4.1.2544.2.4.1.1.5
neSoftwareUpgrade
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.4.2
neSwUpgradeRequestThe request to the software upgrade function. Request 2..6 are single step requests while requests 7..9 are batch commands for common upgrade scenarios. Requests 13,14 are defined for automatic install process for F7 platform. If the NE is the FTP server, the file must then have been downloaded to the neSwUpgradeNeDirectory on the NE using the 'netadmin' account.rw
Enumeration
.1.3.6.1.4.1.2544.2.4.2.1
neSwUpgradeStateThe current status of the SW upgrade process. NOTE: All failures that are caused by malfunctioning hardware are reported as internalError(17).ro
NeSwUpgradeStatusType
.1.3.6.1.4.1.2544.2.4.2.2
neSwUpgradeServerAddressThe IP address of the external FTP server.rw
IpAddress
.1.3.6.1.4.1.2544.2.4.2.3
neSwUpgradeServerLoginThe login name on the external FTP server.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.2.4
neSwUpgradeServerPasswdThe password on the external FTP server. Read requests on this object will return a zero-length string.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.2.5
neSwUpgradeServerDirectoryThe SW file location (path) on the external FTP server.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.2.6
neSwUpgradeFileNameThe SW file name (without path) on the external FTP server or the name of the file which has been downloaded to the NE.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.2.7
neSwUpgradeNeDirectoryThe SW file location (path) on the NE.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.4.2.8
neSwUpgradeTransferProtocolThe transfer protocol to be used.rw
FileTransferProtocol
.1.3.6.1.4.1.2544.2.4.2.9
sourceIpAddressIP address used as source IP address in FTP Client sessionrw
SourceIpAddress
.1.3.6.1.4.1.2544.2.4.2.10
neSwInstallStateSoftware installation state.ro
NeSwInstallStatusType
.1.3.6.1.4.1.2544.2.4.2.11
neSwUpgradeTypeRequired procedure type to be used for software download. legacy(1) is the default value. This parameter MUST be set before any other parameters will be set for software upgrade procedure (for example IP address, user name, password etc.). revised(2) value corresponds to Revised Upgrade Procedure which uses new PGM format. This parameter is NOT stored in the database and will be reset to default after SNMP Agent restart.rw
Enumeration
.1.3.6.1.4.1.2544.2.4.2.12
neSwDownloadProgressOperational progress in % i.e. file transfer
Integer32 (0..100 | -2147483648) UNITS "%"
.1.3.6.1.4.1.2544.2.4.2.13
config
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5
provContainerTableThis table defines the objects that support provisioning of 'container' class physical entities. Provisioning sets up a 'container' to hold a specified physical entity. This allows a management client to configure the specified physical entity, including all of its subordinates physical entities, before installation. Provisioning allows the network manager to 'create' the physical entities that represent the new modules. In essence, the device simulates the installation of the new modules into the system. This has the effect of creating all conceptual rows in all the necessary tables that support the physical entity and all its subordinate physical entities (e.g., entPhysicalTable, and ifTable). The table extends some entries in the entPhysicalTable (see ENTITY-MIB for further details). A entry appears in this table for a physical entity matching the following criteria: 1) Its entPhysicalClass object has a value of 'container'; 2) It can contain one (but not multiple) physical entity; and, 3) It supports provisioning. The following states cause an alarm to be raised at the level of the containing module: IF provAssignmentState = assigned(1) AND provEquipmentState = unequipped(2) THEN 'eqMissing' alarm IF provEquipmentState = invalid(3) THEN 'eqNotAccepted' alarm
SEQUENCE OF ProvContainerEntry
.1.3.6.1.4.1.2544.2.5.1
provContainerEntryEntries in the provContainer Table.
ProvContainerEntry
.1.3.6.1.4.1.2544.2.5.1.1
provAssignmentStateThis status indicates the assignment (provisioning) of a module type to the container.ro
Enumeration
.1.3.6.1.4.1.2544.2.5.1.1.1
provEquipmentStateThis status indicates how the container is equipped: 'equipped' The container holds a module that fits to the container. 'unequipped' The container does not hold any hardware. 'invalid' The container holds a recognized module that the container is not capable of supporting, or the container holds an unrecognized module.ro
Enumeration
.1.3.6.1.4.1.2544.2.5.1.1.2
neBackupRestore
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.2
neBackupRestoreRequestRun network element configuration Backup/Restore operation: - none(1): No action (read only) - runBackup(2): Save the network element configuration to a file (write only) - runRestore(3): Restore the network element configuration from a file (write only) The Restore operation does not overwrite settings which are required to reestablish contact to the NE via SNMP and Telnet.rw
Enumeration
.1.3.6.1.4.1.2544.2.5.2.1
neBackupRestoreStateThe status of the current NE configuration backup/restore operation activated by 'neBackupRestoreRequest'.ro
Enumeration
.1.3.6.1.4.1.2544.2.5.2.2
neBackupRestoreFileThe full local path of the network element configuration backup file. This file is generated during the Backup operation and is also used for the Restore operation.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.2.3
neRestoreFileBackupDateThe backup time of the current file to be used for Restore. If no backup is available, this object reports 8 zero-octets.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.5.2.4
neF7AutomaticRemoteBackupSrvIpRemote server IP as a backup destination address.rw
IpAddress
.1.3.6.1.4.1.2544.2.5.2.5
neF7AutomaticRemoteBackupSrvDirRemote server directory.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.2.6
neF7AutomaticRemoteBackupSrvLoginRemote user login.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.2.7
neF7AutomaticRemoteBackupSrvPassRemote user password.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.2.8
neF7AutomaticRemoteBackupProtocolConnection protocol to be used for remote backup.rw
FileTransferProtocol
.1.3.6.1.4.1.2544.2.5.2.10
neF7AutomaticRemoteBackupSrcIpSource IP address to be used for remote backup.rw
SourceIpAddress
.1.3.6.1.4.1.2544.2.5.2.11
neF7AutomaticRemoteBackupTimeStampAdd or omit the time stamp in the backuped filename.rwdeprecated
F7FileTimeStamp
.1.3.6.1.4.1.2544.2.5.2.12
neF7AutomaticBackupTableTable releated to SCU/Remote backup.
SEQUENCE OF NeF7AutomaticBackupEntry
.1.3.6.1.4.1.2544.2.5.2.20
neF7AutomaticBackupEntryEntry releated to SCU/Remote backup.
NeF7AutomaticBackupEntry
.1.3.6.1.4.1.2544.2.5.2.20.1
neF7AutomaticBackupIndexIndex of the backup entity. May be the Backup SCU entity index or Backup Remote entity index.
EntityIndex
.1.3.6.1.4.1.2544.2.5.2.20.1.1
neF7AutomaticBackupIntervalSchedule database backup interval.rw
F7AutoBackupInterval
.1.3.6.1.4.1.2544.2.5.2.20.1.2
neF7AutomaticBackupStartDateSchedule database backup start date.rw
FspDate
.1.3.6.1.4.1.2544.2.5.2.20.1.3
neF7AutomaticBackupStartTimeSchedule database backup start time.rw
FspTime
.1.3.6.1.4.1.2544.2.5.2.20.1.4
neF7AutomaticBackupNextDateNext schedule database backup date.ro
FspDate
.1.3.6.1.4.1.2544.2.5.2.20.1.5
neF7AutomaticBackupRunStateAutomatic Backup running state.rw
F7AutoBackupRunState
.1.3.6.1.4.1.2544.2.5.2.20.1.6
neF7AutomaticBackupTimeStampAdd or omit the time stamp in the backuped filename.rw
F7FileTimeStamp
.1.3.6.1.4.1.2544.2.5.2.20.1.7
neAutoBackup
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.3
neAutoBackupConfigThe configuration of the regular network element configuration Backup/Restore: - disabled(1): No regular backup - autoBackup(2): Regular backup to a local file is active - autoBackupAndUpload(3): Regular backup and upload to external FTP server is active The default is autoBackup(2). If this object is not disabled(1) all other auto-backup objects are read-only. I.e., all neAutoBackupServerXxx objects must be set before changing this object to autoBackupAndUpload(3).rw
Enumeration
.1.3.6.1.4.1.2544.2.5.3.1
neAutoBackupIntervalThe interval between two subsequent backup actions in hours (default: 24 hours).rw
Unsigned32 UNITS "hours"
.1.3.6.1.4.1.2544.2.5.3.2
neAutoBackupNextActionAtThe sliding time of the next backup action (default: midnight local NE time).rw
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.5.3.3
neAutoBackupServerAddressThe IP address of the external FTP server for backup files.rw
IpAddress
.1.3.6.1.4.1.2544.2.5.3.4
neAutoBackupServerLoginThe login name on the external FTP server for backup files.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.3.5
neAutoBackupServerPasswdThe password on the external FTP server for backup files. Read requests on this object will return a zero-length string.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.3.6
neAutoBackupServerDirectoryThe directory on the external FTP server to which the backup files will be uploaded. The file name will be generated automatically (containing NE IP addres and backup time).rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.3.7
transportStandards
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.4
sonet
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.4.1
sonetConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.4.1.1
sonetSectionConfigTableContains entries for the configuration of SONET interfaces. In the naming of parameters, only sonet (and not sdh) is used for simplification. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF SonetSectionConfigEntry
.1.3.6.1.4.1.2544.2.5.4.1.1.1
sonetSectionConfigEntrySDH/SONET interfaces will have an entry in this table.
SonetSectionConfigEntry
.1.3.6.1.4.1.2544.2.5.4.1.1.1.1
sonetSectionConfigTimingSourceThe SDH/SONET timing source for this interface. - internal: used in stand-alone, point-to-point topologies stand-alone (dedicated fiber operation) - loopTiming: used in point-to-point via SDH network and feeder topologies. The default is internal(1).rw
SonetTimingSource
.1.3.6.1.4.1.2544.2.5.4.1.1.1.1.1
sonetSectionConfigSignalDegradeThreshholdBlock-Error-Based Degradation Definition for SDH (standard integration period). Defined as percentage Background Block Errors (30% default) evaluated over a defined period (SDPER-RS).rw
Unsigned32 (1..100 | 4294967295) UNITS "%"
.1.3.6.1.4.1.2544.2.5.4.1.1.1.1.2
sonetSectionConfigSignalDegradePeriodThe measurement period in seconds used together with the sonetSectionConfigSignalDegradeThreshold based on the block error counting method. The valid range is 2..10, The default being 7.rw
Unsigned32 (2..10 | 4294967295) UNITS "s"
.1.3.6.1.4.1.2544.2.5.4.1.1.1.1.3
sonetSectionConfigTraceFormByte-Length of Trace Compared to Expectedrw
SonetTraceForm
.1.3.6.1.4.1.2544.2.5.4.1.1.1.1.4
sonetSectionConfigTraceExpectedExpected Sec/RS trace. NULL TRACE implies that no trace comparison is made.rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.1.1.1.1.5
sonetSectionConfigTraceTransmitSec/RS Trace to be Transmittedrw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.1.1.1.1.6
sonetSectionConfigTimModeDetection of TIM Sonet Section Condition can be configuredrw
TimMode
.1.3.6.1.4.1.2544.2.5.4.1.1.1.1.7
sonetSectionDataTableContains entries for the status of SONET interfaces. In the naming of parameters, only sonet (and not sdh) is used for simplification. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF SonetSectionDataEntry
.1.3.6.1.4.1.2544.2.5.4.1.1.3
sonetSectionDataEntrySDH/SONET interfaces will have an entry in this table.
SonetSectionDataEntry
.1.3.6.1.4.1.2544.2.5.4.1.1.3.1
sonetSectionDataTraceReceivedThe received Sec/RS Tracero
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.1.1.3.1.1
otn
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.4.2
otuConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.4.2.1
otuSectionConfigTableContains entries for the configuration of OTU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OtuSectionConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.1.1
otuSectionConfigEntryOTU interfaces will have an entry in this table.
OtuSectionConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1
otuSectionConfigSignalDegradeThresholdThreshold for OTU SM-SD alarm (threshold level 0..100%, default value 15 %). Ref. table 24/G.7710.rw
Integer32 (1..100 | -2147483648) UNITS "%"
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.1
otuSectionConfigSignalDegradePeriodMeasuring period for OTU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.rw
Unsigned32 (2..10 | 4294967295) UNITS "s"
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.2
otuSectionConfigPayloadThe payload of the interface (inside a transport overhead). Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.rw
OtnPayloadType
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.3
otuSectionConfigStuffingIndicates if bit/byte stuffing is used in the transport signal.rw
EnableState
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.4
otuSectionConfigTraceExpectedExpected SAPI part of the OTU trace (15 character). NULL TRACE implies that no trace comparison is made.rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.5
otuSectionConfigTraceTransmitSapiThe transmitted SAPI part of the OTU trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.6
otuSectionConfigTraceTransmitDapiThe transmitted DAPI part of the OTU trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.7
otuSectionConfigTraceTransmitOpspThe transmitted Operator Specific part of the OTU trace (32 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.8
otuSectionConfigTimModeDetection of TIM-OTU Condition can be configuredrw
TimMode
.1.3.6.1.4.1.2544.2.5.4.2.1.1.1.9
otuSectionDataTableContains entries for the status of OTU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OtuSectionDataEntry
.1.3.6.1.4.1.2544.2.5.4.2.1.2
otuSectionDataEntryOTU interfaces will have an entry in this table.
OtuSectionDataEntry
.1.3.6.1.4.1.2544.2.5.4.2.1.2.1
otuSectionDataResultingTotalBitrateThis interface bitrate is dependent on the type and the payload of the interface. Relevant e. g. for OTN cards which wrap a payload into an OTU1/2 wrapper.ro
Unsigned32 UNITS "Mbit/s"
.1.3.6.1.4.1.2544.2.5.4.2.1.2.1.1
otuSectionDataTraceReceivedSapiThe received SAPI part of the OTU trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.1.2.1.2
otuSectionDataTraceReceivedDapiThe received DAPI part of the OTU trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.1.2.1.3
otuSectionDataTraceReceivedOpspThe received Operator Specific part of the OTU trace (32 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.1.2.1.4
oduConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.4.2.2
oduSectionConfigTableContains entries for the configuration of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OduSectionConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.1
oduSectionConfigEntryODU interfaces will have an entry in this table.
OduSectionConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.1.1
oduSectionConfigSignalDegradeThresThreshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %. Ref. table 24/G.7710.rw
Integer32 (1..100 | -2147483648) UNITS "%"
.1.3.6.1.4.1.2544.2.5.4.2.2.1.1.1
oduSectionConfigSignalDegradePeriodMeasuring period for ODU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.rw
Unsigned32 (2..10 | 4294967295) UNITS "s"
.1.3.6.1.4.1.2544.2.5.4.2.2.1.1.2
oduSectionConfigTraceExpectedExpected SAPI part of the ODU trace (15 character). NULL TRACE implies that no trace comparison is made.rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.1.1.3
oduSectionConfigTraceTransmitSapiThe transmitted SAPI part of the ODU trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.1.1.4
oduSectionConfigTraceTransmitDapiThe transmitted DAPI part of the ODU trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.1.1.5
oduSectionConfigTraceTransmitOpspThe transmitted Operator Specific part of the ODU trace (32 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.1.1.6
oduSectionConfigTimModeDetection of TIM-ODU Condition can be configuredrw
TimMode
.1.3.6.1.4.1.2544.2.5.4.2.2.1.1.7
oduSectionDataTableContains entries for the status of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OduSectionDataEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.2
oduSectionDataEntryODU interfaces will have an entry in this table.
OduSectionDataEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.2.1
oduSectionDataTraceReceivedSapiThe received SAPI part of the ODU trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.2.1.1
oduSectionDataTraceReceivedDapiThe received DAPI part of the ODU trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.2.1.2
oduSectionDataTraceReceivedOpspThe received Operator Specific part of the ODU trace (32 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.2.1.3
oduTcmAConfigTableContains entries for the configuration of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OduTcmAConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.3
oduTcmAConfigEntryODU interfaces will have an entry in this table.
OduTcmAConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1
oduTcmAConfigSignalDegradeThresholdThreshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). Ref. table 24/G.7710.rw
Integer32 (1..100 | -2147483648) UNITS "%"
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1.1
oduTcmAConfigSignalDegradePeriodMeasuring period for ODU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.rw
Unsigned32 (2..10 | 4294967295) UNITS "s"
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1.2
oduTcmAConfigTcmLevelActivation of Tandem Connection Monitoring Instance Arw
OtnTcmLevel
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1.3
oduTcmAConfigTraceExpectedExpected SAPI part of the TCMA trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1.4
oduTcmAConfigTraceTransmitSapiThe transmitted SAPI part of the TCMA trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1.5
oduTcmAConfigTraceTransmitDapiThe transmitted DAPI part of the TCMA trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1.6
oduTcmAConfigTraceTransmitOpspThe transmitted Operator Specific part of the TCMA trace (32 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1.7
oduTcmAConfigTimModeDetection of TIM-TCMA Condition can be configuredrw
TimMode
.1.3.6.1.4.1.2544.2.5.4.2.2.3.1.8
oduTcmBConfigTableContains entries for the configuration of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OduTcmBConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.4
oduTcmBConfigEntryODU interfaces will have an entry in this table.
OduTcmBConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1
oduTcmBConfigSignalDegradeThresholdThreshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). Ref. table 24/G.7710.rw
Integer32 (1..100 | -2147483648) UNITS "%"
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1.1
oduTcmBConfigSignalDegradePeriodMeasuring period for ODU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.rw
Unsigned32 (2..10 | 4294967295) UNITS "s"
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1.2
oduTcmBConfigTcmLevelActivation of Tandem Connection Monitoring Instance Brw
OtnTcmLevel
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1.3
oduTcmBConfigTraceExpectedExpected SAPI part of the TCMB trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1.4
oduTcmBConfigTraceTransmitSapiThe transmitted SAPI part of the TCMB trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1.5
oduTcmBConfigTraceTransmitDapiThe transmitted DAPI part of the TCMB trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1.6
oduTcmBConfigTraceTransmitOpspThe transmitted Operator Specific part of the TCMB trace (32 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1.7
oduTcmBConfigTimModeDetection of TIM-TCMB Condition can be configuredrw
TimMode
.1.3.6.1.4.1.2544.2.5.4.2.2.4.1.8
oduTcmCConfigTableContains entries for the configuration of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OduTcmCConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.5
oduTcmCConfigEntryODU interfaces will have an entry in this table.
OduTcmCConfigEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1
oduTcmCConfigSignalDegradeThresholdThreshold for ODU SM-SD alarm (threshold level 0..100%, default value 15 %). Ref. table 24/G.7710.rw
Integer32 (1..100 | -2147483648) UNITS "%"
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1.1
oduTcmCConfigSignalDegradePeriodMeasuring period for ODU SM-SD alarm: 2..10 sec) (bursty) Ref. table 24/G.7710. Default value: 7.rw
Unsigned32 (2..10 | 4294967295) UNITS "s"
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1.2
oduTcmCConfigTcmLevelActivation of Tandem Connection Monitoring Instance Crw
OtnTcmLevel
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1.3
oduTcmCConfigTraceExpectedExpected SAPI part of the TCMC trace (15 character). NULL TRACE-TCM implies that no trace comparison is made.rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1.4
oduTcmCConfigTraceTransmitSapiThe transmitted SAPI part of the TCMC trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1.5
oduTcmCConfigTraceTransmitDapiThe transmitted DAPI part of the TCMC trace (15 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1.6
oduTcmCConfigTraceTransmitOpspThe transmitted Operator Specific part of the TCMC trace (32 character)rw
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1.7
oduTcmCConfigTimModeDetection of TIM-TCMC Condition can be configuredrw
TimMode
.1.3.6.1.4.1.2544.2.5.4.2.2.5.1.8
oduTcmADataTableContains entries for the status of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OduTcmADataEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.6
oduTcmADataEntryODU interfaces will have an entry in this table.
OduTcmADataEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.6.1
oduTcmADataTraceReceivedSapiThe received SAPI part of the TCMA trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.6.1.1
oduTcmADataTraceReceivedDapiThe received DAPI part of the TCMA trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.6.1.2
oduTcmADataTraceReceivedOpspThe received Operator Specific part of the TCMA trace (32 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.6.1.3
oduTcmBDataTableContains entries for the status of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OduTcmBDataEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.7
oduTcmBDataEntryODU interfaces will have an entry in this table.
OduTcmBDataEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.7.1
oduTcmBDataTraceReceivedSapiThe received SAPI part of the TCMB trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.7.1.1
oduTcmBDataTraceReceivedDapiThe received DAPI part of the TCMB trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.7.1.2
oduTcmBDataTraceReceivedOpspThe received Operator Specific part of the TCMB trace (32 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.7.1.3
oduTcmCDataTableContains entries for the status of ODU interfaces. This table extends the entries in the ifTable (RFC 2863).
SEQUENCE OF OduTcmCDataEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.8
oduTcmCDataEntryODU interfaces will have an entry in this table.
OduTcmCDataEntry
.1.3.6.1.4.1.2544.2.5.4.2.2.8.1
oduTcmCDataTraceReceivedSapiThe received SAPI part of the TCMC trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.8.1.1
oduTcmCDataTraceReceivedDapiThe received DAPI part of the TCMC trace (15 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.8.1.2
oduTcmCDataTraceReceivedOpspThe received Operator Specific part of the TCMC trace (32 character)ro
OCTET STRING
.1.3.6.1.4.1.2544.2.5.4.2.2.8.1.3
inventoryMib
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.5
inventoryTableThis table lists all physically present (equipped) equipment in the NE
SEQUENCE OF InventoryEntry
.1.3.6.1.4.1.2544.2.5.5.1
inventoryEntry
InventoryEntry
.1.3.6.1.4.1.2544.2.5.5.1.1
inventoryUnitNameADVA Official Equipment Namero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.1
inventoryFirmwarePackageRevFirmware Package Revision Numberro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.2
inventoryHardwareRevEquipment Revision Numberro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.3
inventorySoftwareRevThe active Application software version on the unit/module.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.4
inventoryFpgaRevThe active FPGA version on the unit/module.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.5
inventorySerialNumEquipment Serial Numberro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.6
inventoryPartnumberADVA Part Numberro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.7
inventoryCleiCodeCommon Lanuage Equipment Identifierro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.8
inventoryVendorIdOEM Vendor Codero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.9
inventoryTypeType of a physical entity: shelf/module/plugro
EntityType
.1.3.6.1.4.1.2544.2.5.5.1.1.10
inventoryUniversalSerialIdentUnique Serial Identifierro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.1.1.11
inventoryMacAddressEthernet MAC addressro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.5.5.1.1.12
inventoryGradeInventoryUsed to distinguish between NCU capabilities (range of supported services or applications)ro
Grade
.1.3.6.1.4.1.2544.2.5.5.1.1.13
entityTableTable for all existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
SEQUENCE OF EntityEntry
.1.3.6.1.4.1.2544.2.5.5.2
entityEntryEntry for all existing addresses.
EntityEntry
.1.3.6.1.4.1.2544.2.5.5.2.1
entityIndexExisting adress indexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.2.1.1
entityContainedInContained inro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.2.1.2
entityClassSee EntityClassro
EntityClass
.1.3.6.1.4.1.2544.2.5.5.2.1.3
entityClassInstanceNumberThe class instance number of this entity within the module(card)ro
Integer32 (1..2000 | -2147483648)
.1.3.6.1.4.1.2544.2.5.5.2.1.4
entityIndexAidNamero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.2.1.5
entityTypeThe type of FspR7 entity. Please refer to EntityType for further deails.ro
EntityType
.1.3.6.1.4.1.2544.2.5.5.2.1.6
entityAssignmentStateSee AssignmentState.ro
AssignmentState
.1.3.6.1.4.1.2544.2.5.5.2.1.7
entityEquipmentStateSee EquipmentState.ro
EquipmentState
.1.3.6.1.4.1.2544.2.5.5.2.1.8
containsTableTable for all existing addresses. Gives the index of the subtending entity in the containment.
SEQUENCE OF ContainsEntry
.1.3.6.1.4.1.2544.2.5.5.3
containsEntry
ContainsEntry
.1.3.6.1.4.1.2544.2.5.5.3.1
containsIndexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.3.1.1
controlPlaneWdmEntityTableTable for all existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
SEQUENCE OF ControlPlaneWdmEntityEntry
.1.3.6.1.4.1.2544.2.5.5.4
controlPlaneWdmEntityEntryEntry for all existing addresses.
ControlPlaneWdmEntityEntry
.1.3.6.1.4.1.2544.2.5.5.4.1
controlPlaneWdmEntityIndexExisting adress indexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.4.1.1
controlPlaneWdmEntityContainedInContained inro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.4.1.2
controlPlaneWdmEntityClassSee EntityClassro
CpWdmEntityClass
.1.3.6.1.4.1.2544.2.5.5.4.1.3
controlPlaneWdmEntityClassInstanceNumberThe class instance number of this entity within the module(card)ro
Integer32 (1..2000 | -2147483648)
.1.3.6.1.4.1.2544.2.5.5.4.1.4
controlPlaneWdmEntityIndexAidNamero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.4.1.5
controlPlaneWdmEntityAssignmentStateSee AssignmentState.ro
AssignmentState
.1.3.6.1.4.1.2544.2.5.5.4.1.6
controlPlaneWdmContainsTableTable for all existing addresses. Gives the index of the subtending entity in the containment.
SEQUENCE OF ControlPlaneWdmContainsEntry
.1.3.6.1.4.1.2544.2.5.5.5
controlPlaneWdmContainsEntry
ControlPlaneWdmContainsEntry
.1.3.6.1.4.1.2544.2.5.5.5.1
controlPlaneWdmContainsIndexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.5.1.1
controlPlaneEthEntityTableTable for all existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
SEQUENCE OF ControlPlaneEthEntityEntry
.1.3.6.1.4.1.2544.2.5.5.6
controlPlaneEthEntityEntryEntry for all existing addresses.
ControlPlaneEthEntityEntry
.1.3.6.1.4.1.2544.2.5.5.6.1
controlPlaneEthEntityIndexExisting adress indexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.6.1.1
controlPlaneEthEntityContainedInContained inro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.6.1.2
controlPlaneEthEntityClassSee EntityClassro
CpWdmEntityClass
.1.3.6.1.4.1.2544.2.5.5.6.1.3
controlPlaneEthEntityClassInstanceNumberThe class instance number of this entity within the module(card)ro
Integer32 (1..2000 | -2147483648)
.1.3.6.1.4.1.2544.2.5.5.6.1.4
controlPlaneEthEntityIndexAidNamero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.6.1.5
controlPlaneEthEntityAssignmentStateSee AssignmentState.ro
AssignmentState
.1.3.6.1.4.1.2544.2.5.5.6.1.6
controlPlaneEthContainsTableTable for all existing addresses. Gives the index of the subtending entity in the containment.
SEQUENCE OF ControlPlaneEthContainsEntry
.1.3.6.1.4.1.2544.2.5.5.7
controlPlaneEthContainsEntry
ControlPlaneEthContainsEntry
.1.3.6.1.4.1.2544.2.5.5.7.1
controlPlaneEthContainsIndexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.7.1.1
ptpEntityTableTable for PTP existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
SEQUENCE OF PtpEntityEntry
.1.3.6.1.4.1.2544.2.5.5.10
ptpEntityEntry
PtpEntityEntry
.1.3.6.1.4.1.2544.2.5.5.10.1
ptpEntityIndexExisting adress indexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.10.1.1
ptpEntityContainedInContained inro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.10.1.2
ptpEntityClassSee EntityClassro
EntityClass
.1.3.6.1.4.1.2544.2.5.5.10.1.3
ptpEntityClassInstanceNumberThe class instance number of this entity within the module(card)ro
Integer32 (1..2000 | -2147483648)
.1.3.6.1.4.1.2544.2.5.5.10.1.4
ptpEntityIndexAidNamero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.10.1.5
ptpEntityTypeThe type of FspR7 entity. Please refer to EntityType for further deails.ro
EntityType
.1.3.6.1.4.1.2544.2.5.5.10.1.6
ptpEntityAssignmentStateSee AssignmentState.ro
AssignmentState
.1.3.6.1.4.1.2544.2.5.5.10.1.7
ptpEntityEquipmentStateSee EquipmentState.ro
EquipmentState
.1.3.6.1.4.1.2544.2.5.5.10.1.8
ptpEntityReferencedToro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.10.1.9
vtpEntityTableTable for VTP existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
SEQUENCE OF VtpEntityEntry
.1.3.6.1.4.1.2544.2.5.5.11
vtpEntityEntry
VtpEntityEntry
.1.3.6.1.4.1.2544.2.5.5.11.1
vtpEntityIndexExisting adress indexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.11.1.1
vtpEntityContainedInContained inro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.11.1.2
vtpEntityClassSee EntityClassro
EntityClass
.1.3.6.1.4.1.2544.2.5.5.11.1.3
vtpEntityClassInstanceNumberThe class instance number of this entity within the module(card)ro
Integer32 (1..2000 | -2147483648)
.1.3.6.1.4.1.2544.2.5.5.11.1.4
vtpEntityIndexAidNamero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.11.1.5
vtpEntityTypeThe type of FspR7 entity. Please refer to EntityType for further deails.ro
EntityType
.1.3.6.1.4.1.2544.2.5.5.11.1.6
vtpEntityAssignmentStateSee AssignmentState.ro
AssignmentState
.1.3.6.1.4.1.2544.2.5.5.11.1.7
vtpEntityEquipmentStateSee EquipmentState.ro
EquipmentState
.1.3.6.1.4.1.2544.2.5.5.11.1.8
vtpEntityReferencedToro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.11.1.9
controlPlaneOtnEntityTableTable for all existing addresses. Entities in this table are either provisioned, equipped, both of these or neither of these. Containers are always present in the table as long as their supporting entity is provisioned or equipped.
SEQUENCE OF ControlPlaneOtnEntityEntry
.1.3.6.1.4.1.2544.2.5.5.12
controlPlaneOtnEntityEntryEntry for all existing addresses.
ControlPlaneOtnEntityEntry
.1.3.6.1.4.1.2544.2.5.5.12.1
controlPlaneOtnEntityIndexExisting adress indexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.12.1.1
controlPlaneOtnEntityContainedInContained inro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.12.1.2
controlPlaneOtnEntityClassSee EntityClassro
CpWdmEntityClass
.1.3.6.1.4.1.2544.2.5.5.12.1.3
controlPlaneOtnEntityClassInstanceNumberThe class instance number of this entity within the module(card)ro
Integer32 (1..2000 | -2147483648)
.1.3.6.1.4.1.2544.2.5.5.12.1.4
controlPlaneOtnEntityIndexAidNamero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.5.12.1.5
controlPlaneOtnEntityAssignmentStateSee AssignmentState.ro
AssignmentState
.1.3.6.1.4.1.2544.2.5.5.12.1.6
controlPlaneOtnContainsTableTable for all existing addresses. Gives the index of the subtending entity in the containment.
SEQUENCE OF ControlPlaneOtnContainsEntry
.1.3.6.1.4.1.2544.2.5.5.13
controlPlaneOtnContainsEntry
ControlPlaneOtnContainsEntry
.1.3.6.1.4.1.2544.2.5.5.13.1
controlPlaneOtnContainsIndexro
EntityIndex
.1.3.6.1.4.1.2544.2.5.5.13.1.1
updateBackupRestoreMib
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.6
swAdmin
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.6.1
swDbFileTable
SEQUENCE OF SwDbFileEntry
.1.3.6.1.4.1.2544.2.5.6.1.1
swDbFileEntry
SwDbFileEntry
.1.3.6.1.4.1.2544.2.5.6.1.1.1
swDbFileIndexIndex
EntityIndex
.1.3.6.1.4.1.2544.2.5.6.1.1.1.1
swDbFileAreaType of Arearo
FileArea
.1.3.6.1.4.1.2544.2.5.6.1.1.1.2
swDbFileTypeType of Filero
FileType
.1.3.6.1.4.1.2544.2.5.6.1.1.1.3
swDbFileSizeSize of Memory = USED + AVAILABLEro
Unsigned32 UNITS "Byte"
.1.3.6.1.4.1.2544.2.5.6.1.1.1.4
swDbFileCreationTimeCreation Timero
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.5.6.1.1.1.5
swDbFileVersionGeneral Release Issue Number of software in the ACT or STBY memory location. Format: XX-YY-Zro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.1.1.1.6
swDbFileGradeUsed to distinguish between NCU capabilities (range of supported services or applications)ro
Grade
.1.3.6.1.4.1.2544.2.5.6.1.1.1.7
swDbFileCommentComment of PGM or DBS files.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.1.1.1.8
swDbFileFileNameFilenamero
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.1.1.1.9
swDbFileRowStatusRowStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.5.6.1.1.1.10
swDbFilePgmTypeProgram Typero
PgmType
.1.3.6.1.4.1.2544.2.5.6.1.1.1.11
fwDataTable
SEQUENCE OF FwDataEntry
.1.3.6.1.4.1.2544.2.5.6.1.2
fwDataEntry
FwDataEntry
.1.3.6.1.4.1.2544.2.5.6.1.2.1
fwDataNewVersionNew Firmware Package Revision Number of file which resides on ACT PGM partition.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.1.2.1.1
fwDataStandbyVersionNew Firmware Package Revision Number of file which resides on STBY PGM partition.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.1.2.1.2
fwDataServiceImpairmentService Affecting Change during FWP upgrade.ro
ServiceAffecting
.1.3.6.1.4.1.2544.2.5.6.1.2.1.3
fwDataBootStatusBoot State. Every state change (excluding IDLE) does generate a corresponding transient condition.ro
BootState
.1.3.6.1.4.1.2544.2.5.6.1.2.1.4
fwDataFirmwarePackageRevActive Firmware Package Revision Number of module software.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.1.2.1.5
fwDataStandbyServiceImpairmentService Affecting Change during FWP upgrade after activation of STBY PGM partition.ro
StandbyServiceAffecting
.1.3.6.1.4.1.2544.2.5.6.1.2.1.6
fwDataFirmwareAvailableFirmware package for Encryption module available on RDISKro
NoYesNA
.1.3.6.1.4.1.2544.2.5.6.1.2.1.7
fwDataFirmwareApprovedFirmware package update for Encryption module is approved by Crypto Officerro
NoYesNA
.1.3.6.1.4.1.2544.2.5.6.1.2.1.8
coldRestartCapTable
SEQUENCE OF ColdRestartCapEntry
.1.3.6.1.4.1.2544.2.5.6.1.3
coldRestartCapEntry
ColdRestartCapEntry
.1.3.6.1.4.1.2544.2.5.6.1.3.1
coldRestartCapServiceAffectingCapService Affecting Change during FWP upgrade.ro
ServiceAffectingCaps
.1.3.6.1.4.1.2544.2.5.6.1.3.1.1
eqpFwUpgradeRequestUpdate, Install and Reboot commands.rw
CommandEqpt
.1.3.6.1.4.1.2544.2.5.6.1.10
eqpFwServiceImpairmentService Affecting Change during FWP upgrade.rw
ServiceAffecting
.1.3.6.1.4.1.2544.2.5.6.1.11
eqpFwNextEqpForUpdateThe valid address of physically available Equipment part.rw
EntityIndex
.1.3.6.1.4.1.2544.2.5.6.1.12
eqpFwEqpTypeThe TYPE of Equipment and the MODE setting determine uniquely the number and allowed TYPE's of the provisionable dependent entities (plugs, interfaces, modules)rw
FspR7EquipmentType
.1.3.6.1.4.1.2544.2.5.6.1.13
eqpFwNcuServerBusyNCU SW download busyro
FspR7FalseTrue
.1.3.6.1.4.1.2544.2.5.6.1.14
eqpFwEqpServerBusyFirmware package download busyro
FspR7FalseTrue
.1.3.6.1.4.1.2544.2.5.6.1.15
updateEqptNumber of equipment which have to be updatedro
Unsigned32
.1.3.6.1.4.1.2544.2.5.6.1.16
installedEqptNumber of equipment is already installedro
Unsigned32
.1.3.6.1.4.1.2544.2.5.6.1.17
selectedFileFilenamerw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.1.18
ncuActivationDateActivation Date. Format: YY-MM-DDrw
FspR7Date
.1.3.6.1.4.1.2544.2.5.6.1.19
ncuActivationTimeActivation Time. Format HH-MM-SSrw
FspR7Time
.1.3.6.1.4.1.2544.2.5.6.1.20
ncuScheduledActivationEnable scheduled activation of the standby PGM partition.rw
NcuAutoActivation
.1.3.6.1.4.1.2544.2.5.6.1.21
ncuScheduledDbRestoreShows whether scheduled activtion will be a database restore or a new software activationrw
RestoreActivation
.1.3.6.1.4.1.2544.2.5.6.1.22
encryptionFwpFileThe name FWP for encryption capable modules.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.1.23
clearRdiskRequestThis object initiate RDISK clearance.rw
Enumeration
.1.3.6.1.4.1.2544.2.5.6.1.24
dbAdmin
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.6.2
neRestoreConfigShows whether the last activation was(will be) a database restore or a new software activationrw
RestoreActivation
.1.3.6.1.4.1.2544.2.5.6.2.1
swDbDataTable
SEQUENCE OF SwDbDataEntry
.1.3.6.1.4.1.2544.2.5.6.2.2
swDbDataEntry
SwDbDataEntry
.1.3.6.1.4.1.2544.2.5.6.2.2.1
swDbDataIndexIndex
EntityIndex
.1.3.6.1.4.1.2544.2.5.6.2.2.1.1
swDbDataAreaType of Arearo
FileArea
.1.3.6.1.4.1.2544.2.5.6.2.2.1.2
swDbDataProgramVersionGeneral Release Issue Number of software in the ACT or STBY memory location. Format: XX-YY-Zro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.2.2.1.3
swDbDataDatabaseVersionGeneral Release Issue Number of Database in the ACT or STBY memory location. Typically this will be the same as the GISSUE.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.2.2.1.4
swDbDataActivationTimeActivation Timero
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.5.6.2.2.1.5
swDbDataRestoreConfigShows whether the last activation was(will be) a database restore or a new software activationro
RestoreActivation
.1.3.6.1.4.1.2544.2.5.6.2.2.1.6
swDbDataFirmwareSetVersionFirmware Package Set Versionro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.2.2.1.7
swDbDataNcuSoftwareVersionNCU Software Version ACT or STBY memory location. Format: XX-YY-Zro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.6.2.2.1.8
swDbDataStandbyPartitionStatusPartition Statero
PartitionStatus
.1.3.6.1.4.1.2544.2.5.6.2.2.1.9
swDbDataCapTable
SEQUENCE OF SwDbDataCapEntry
.1.3.6.1.4.1.2544.2.5.6.2.3
swDbDataCapEntry
SwDbDataCapEntry
.1.3.6.1.4.1.2544.2.5.6.2.3.1
swDbDataCapUpgradeRequestIndex value is a requested upgrade type from neSwUpgradeRequest object, where following values are applicable: - install(3) - activate(4) - reboot(6) - activateAlp(10) - activateDefaultAlp(11)
Enumeration
.1.3.6.1.4.1.2544.2.5.6.2.3.1.1
swDbDataCapRestoreConfigShows whether the last activation was(will be) a database restore or a new software activationro
RestoreActivationCaps
.1.3.6.1.4.1.2544.2.5.6.2.3.1.2
swDbDataDefaultsTable
SEQUENCE OF SwDbDataDefaultsEntry
.1.3.6.1.4.1.2544.2.5.6.2.4
swDbDataDefaultsEntry
SwDbDataDefaultsEntry
.1.3.6.1.4.1.2544.2.5.6.2.4.1
swDbDataDefaultsUpgradeRequestIndex value is a requested upgrade type from neSwUpgradeRequest object, where following values are applicable: - install(3) - activate(4) - reboot(6) - activateAlp(10) - activateDefaultAlp(11)
Enumeration
.1.3.6.1.4.1.2544.2.5.6.2.4.1.1
swDbDataDefaultsRestoreConfigShows whether the last activation was(will be) a database restore or a new software activationro
RestoreActivation
.1.3.6.1.4.1.2544.2.5.6.2.4.1.2
snmpAgent
OBJECT IDENTIFIER
.1.3.6.1.4.1.2544.2.5.7
snmpServerPortThe TCP or UDP port on which a server is listeningrw
Integer32
.1.3.6.1.4.1.2544.2.5.7.2
snmpProxyServerAdminStateThe Adminstrative State will be displayed in the GUI with full name values; it will be differently displayed in TL1 syntax according to TL1 display rules. The transaction into the UAS state requires a special destroy/delete function.rw
FspR7AdminStateSnmpProxy
.1.3.6.1.4.1.2544.2.5.7.3
snmpProxyServerPortThe TCP or UDP port on which a server is listeningro
Integer32
.1.3.6.1.4.1.2544.2.5.7.4
snmpProxyServerSynchroStateThis parameter is used to synchronize proxy table on GNE with destination NE's availability.rw
SnmpProxySynchronizationState
.1.3.6.1.4.1.2544.2.5.7.5
snmpProxyServerSynchroStageThis parameter is used to indicate stage of synchronization process.
SnmpProxySynchronizationStage
.1.3.6.1.4.1.2544.2.5.7.6
snmpProxyEntrySingleTargetOutTable
SEQUENCE OF SnmpProxyEntrySingleTargetOutEntry
.1.3.6.1.4.1.2544.2.5.7.10
snmpProxyEntrySingleTargetOutEntry
SnmpProxyEntrySingleTargetOutEntry
.1.3.6.1.4.1.2544.2.5.7.10.1
snmpProxyEntrySingleTargetOutAddressIP Address assigned to LAN IP Interface
IpAddress
.1.3.6.1.4.1.2544.2.5.7.10.1.1
snmpProxyEntrySingleTargetOutPortThe destination port
Unsigned32
.1.3.6.1.4.1.2544.2.5.7.10.1.2
snmpProxyEntrySingleTargetOutNodeAgentStatus
DestinationNodeOrAgentState
.1.3.6.1.4.1.2544.2.5.7.10.1.3
snmpProxyEntrySingleTargetOutContextThe contextName used in SNMP messages to an SNMP Proxy Forwarder to indicate for which SNMP Proxy Client the SNMP messages is meantro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.7.10.1.4
snmpProxyEntrySingleTargetOutRowStatusRowStatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2544.2.5.7.10.1.5
snmpProxyEntrySingleTargetOutAdminStateThe Adminstrative State will be displayed in the GUI with full name values; it will be differently displayed in TL1 syntax according to TL1 display rules. The transaction into the UAS state requires a special destroy/delete function.rw
FspR7AdminStateSnmpProxy
.1.3.6.1.4.1.2544.2.5.7.10.1.6
snmpProxyEntrySingleTargetOutUserNameThe name string for user authentication purposesrw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.2544.2.5.7.10.1.7
ADVA-MIB - SNMP MIB Reference | MIBs Explorer